flash l-kit - Fortune Energy

RESIDENTIAL
COMMERCIAL
UTILITY
Product Line
Item #
DR-CFLK-01
DR-CFLK-02
DR-BFLK-01
DR-BFLK-02
Product Name
Dual Rack Flash L-Kit Clear (12.0” x 12.0”)
Dual Rack Flash L-Kit Clear (9.0” x 12.5”)
Dual Rack Flash L-Kit Black (12.0” x 12.0”)
Dual Rack Flash L-Kit Black (9.0” x 12.5”)
Material Specifications
Material Designation
Density (p)
Coefficient of Thermal expansion (αт)
Diffusivity (λ)
Modulus of Elasticity (E)
Shear Modulus (G)
6005-T5
168.56 lbs/ft³ (2.7 g/cm³)
1.306E-05/ °F(2.35E-05/°C)
200.00 W/m-°K
10.152E06 Psi (7,000 kN/cm²)
3.916E06 Psi (2,700 kN/cm²)
Mechanical Properties
FLASH L-KIT
The Dual Rack Flash L-Kit comes in 12.0” x 12.0” and
9.0” x 12.5” sizes and is designed is to be used on
composition/ asphalt shingle roofs. Our roof flashing slides
quickly into place with no need to modify the shingle to
force a fit. Just a simple watertight seal every time. All
stainless steel hardware included for fast, single bolt
installation. 10-year limited product warranty.
ADVANTAGES
•
•
•
•
•
•
•
•
Fast, simple one bolt installation
Stainless steel hardware (included)
All-aluminum 9.0” x 12.0” & 12.0” x 12.0” flashing
10-year warranty: 25-year expected life
Meets or exceeds roofing industry best practices
Tensile Strength (f u,k)
Tensile Yield Strength (f y,k)
Profile Wall Thickness
38.0 Ksi (26.0 kN/cm²)
35.0 Ksi (24.0 kN/cm²)
(t ≤ 0.39 in/100 mm)
Component List
Material
Aluminum Flashing
Heavy Duty L Base
3/8” x 1.5” S.S Hex Bolt
3/8” Sealing Washer
3/8” Flange Nut
3/8” Star Washer
5/16” x 5” S.S Lag Bolt
EPDM Washer
QTY
01
01
01
01
01
01
01
01
Ordering Specifics
Product
Net Weight
DR-CFLK-01 / DR-BFLK-01
0.98 lbs/ set
DR-CFLK-01 / DR-BFLK-02
1.15 lbs/ set
Standard Pack
Standard Pack Dimension
Standard Pack Weight
10 set/ box
14.0” (L) x 13.0” (W) x 3.5” (H)
10.9 lbs/ box
10 set/ box
14.0” (L) x 13.0” (W) x 3.5” (H)
12.5 lbs/ box
Big Pack
Big Pack Weight
4 small box/ big pack (40 set/ Box) 4 small box/ big pack (40 set/ box)
45.0 lbs/ box
51.0 lbs/ box
100% IBC compliant
No shingle cutting
Conforms to UL STD 2703 and Class A Fire Rated
241 N. 10th Street #6-7, Sacramento, CA 95811
www.DualRack.net
RESIDENTIAL
COMMERCIAL
UTILITY
PART NO. - DR-CFLK-01
DR-BFLK-01
FLASH L-KIT
4.00
2.17
.00
12.0
12
0
Installation Guide
For detailed instructions please refer to the Dual Rack installation guide
1. Locate, choose and mark center
of the rafter for racking installation.
Select the courses of shingles
where mounts will be placed.
2. Gently break seal between
shingles and remove any nails.
Slide mount up under shingles,
with flashing lined up with rafter
center for drilling.
3. Put 5/16” x 5” lag bolt through
L-foot. Next slide the EPDM
washer up onto the lag bolt.
4. Secure EPDM washer onto bolt.
Attach bolt and flashing to rooftop.
5. Screw the 5/16” lag bolt into
the rafter, embedded min. 2.5”,
tightening torque is dependent
on the roofing material.
6. You are now ready to attach
the rail. Slide the 3/8” bolt through
the rail groove.
7. Attach the rail to the L-base
using 3/8” bolt, star washer and
nut. Place the star washer
between the rail and L-base.
8. Secure the 3/8” bolt with the
nut. (Tightening torque 14 ft.lbs).
Contact Info
Distributor Info
Dual Rack Inc.
241 N. 10th Street, # 6-7
Sacramento, CA 95811
916-492-2797
241 N. 10th Street #6-7, Sacramento, CA 95811
www.DualRack.net