assembly instruction - Numark Customer Service

3-Seater Swing with Gazebo Canopy
style # SC - 177 - 2GSE - 1
dpci # 009 - 00 - 1973
>> assembly instruction
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck-though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 855-698-4846 to order missing supplies.
2. Use the carton as a working surface to prevent damage during assembly.
3. Gather all tools prior to assembly.
Care and maintenance
Wash with mild soap, rinse with water, and let air dry.
Warranty
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your patio furniture provided your
furniture is maintained with care and used only for personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1) year for steel frame.
Cushion, Straps and/or Wicker Weaves are covered for a period of one (1) year against defects in material or workmanship. Sling fabric is covered for
a period of one (1) year against defects in material or workmanship.
Exclusions: Items used for commercial, contract or other non-residential purposes; display models; items purchased “as is;” or items damaged due to
acts of nature, vandalism, misuse or improper assembly are not covered. Discoloration or fading of the finish or fabrics as a result of exposure to
the elements, chemicals or spills is not covered. Tabletop breakage, corrosion or rusting of hardware and damages to frames or welds caused by
improper assembly, misuse or natural causes are not covered.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color or a similar style
and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
2
table of contents
introduction
hardware
parts list
assembly
2
4-5
6
7-20
QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
3
hardware
(H1) x 4 + 1 spare
(H2) x 4 + 1 spare
(H3) x 8 + 1 spare
M6 x 15 L bolt
M8 x 20 L bolt
M8 x 30 L bolt
(H4) x 4 + 1 spare
(H5) x 2 + 1 spare
(H6) x 6 + 1 spare
M8 x 65 L bolt
M8 x 75 L bolt
M6 x 36 L bolt
(H7) x 4 + 1 spare
M6 nut
4
(H8) x 6 + 1 spare
M8 nut
(H9) x 2
M6 Metal washer
hardware
(H10) x 22
(H11) x 2
(H12) x 2
M8 Metal washer
Plastic washer
S-hook
(H13) x 4
(H14) x 1
(H15) x 1
U-bracket
Open hex wrench
Allen wrench
(H16) x 1
M8 hex wrench
5
ITEM DESCRIPTION QUANTITY
Aa
Leg post
2
Ab
Leg post
2
B
Side panel
2
Ca
Long top crossbar
2
Cb
Short top crossbar
2
D
Rear leg crossbar
1
Ea
Right arm
1
Eb
Left arm
1
F
Front support bar
1
G
Back support bar
1
I
Seat and back
1
J
Hanging bar
4
K
Canopy frame bar
4
L
Canopy crossbar
1
M
Cushion
1
N
Pillow
2
O
Canopy
1
O
L
K
Ab
Aa
Ca
J
Cb
B
G
Ea
M
F
I
N
D
Eb
6
step 1.
(H1) x 4
(H13) x 4
M6 x 15 L bolt
U-bracket
Aa
1.
7
Do not tighten completely.
step 2.
(H10) x 8
(H3) x 8
M8 Metal washer
M8 x 30 L bolt
Ab
Aa
B
8
Do not tighten completely. (note: “ ” should point upward.)
↓
1.
step 3.
(H2) x 4
M8 x 20 L bolt
(H10) x 4
M8 Metal washer
Ca
Aa
1.
9
Do not tighten completely.
step 4.
(H4) x 4
M8 x 65 L bolt
Cb
Ca
(H8) x 4
M8 nut
1.
10
Do not tighten completely.
(H10) x 8
M8 Metal washer
step 5.
(H6) x 2
(H9) x 2
M6 x 36 L bolt
M6 Metal washer
B
D
1.
Tighten all bolts and nuts from step 2 to step 5 by using the wrenches provided.
(note: “ ” should point upward.)
↓
11
step 6.
Ea
G
Ea
G
FRONT
F
1.
12
Slide the tabs on the ends of the Front crossbar (F) and
Back crossbar (G) down into the brackets on the arms.
Eb
step 7.
(H5) x 2
M8 x 75 L bolt
(H8) x 2
M8 nut
(H10) x 2
(H11) x 2
M8 Metal washer
Plastic washer
I
1.
13
Tighten the bolts and nuts by using the wrenches provided.
step 8.
G
14
step 9.
(H12) x 2
S-hook
TOP
J
J
Note: the end with “TOP” should point upward.
15
step 10.
L
K
K
16
L
step 11.
(H6) x 4
M6 x 36 L bolt
(H7) x 4
M6 nut
K
1.
Tighten the bolts and nuts by using the wrenches provided.
Adjusted the U-Bracket angel if needed during assembling.
17
step 12.
O
O
N
18
M
step 13.
1.
19
Using as a swing.
step 14.
1.
20
Converting the swing to a hanging bed.
CARING FOR YOUR OUTDOOR FURNITURE
Please keep this page for your records.
CARING FOR STEEL FURNITURE
Though its power-coated finish is rust-resistant,steel is prone to rust over time with exposure to
the elements.In case of rust of scratches,lightly sand the affected area and apply touch-up paint.
To maintain the finish,periodically apply wax with a soft colth.
CARING FOR OUTDOOR FURNITURE WITH CUSHIONS
Wash frames and cushions with a mild solution of soap and water;rinse thoroughly.Dry completely
and drip-dry cushions. Do not use bleach or solvents.
2014 Target. The Bullseye Design is a trademark of Target Brands. Inc. All rights reserved.