LM6015A11 - 15” TFT HD monitor
Transcription
LM6015A11 - 15” TFT HD monitor
LM6015A11 - 15” TFT HD monitor The 15” TFT monitor from KROMA is aimed at broadcast environments, keeping the highest quality in mind. It features a high resolution TFT panel (1024x768) in native 4:3 with “Full Colour” and wide viewing angle. With hardly 10ms of response time, the LM6015 displays camera movements with no lag. Its 4:3 aspect ratio can be also switched to 16:9. It can be either rackmounted or used on a desktop thanks to its mounting kits. Only 6U high and powered by external power supply. Wide spectrum of video inputs As standard, the LM6015 features a DVI connector, which accepts signals in different modes: VGA, graphic mode DVI, video mode DVI, as well as YPbPr analogue components. In analogue composite environments, the monitor comes in two finished configurations: two multistandard composite inputs (PAL/NTSC/SECAM) or one multistandard input with loopthrough. For digital environments, the user can find two SD/HD-SDI inputs with active loop-though. The monitor can auto-detect the wide range of signal formats available. Password activation The KROMA password activation system is the perfect way for a successful transition to HD. All inputs (except DVI, which comes by default), are activated at user’s request; this way, the monitor is adapted to the user’s needs. Since the complete hardware is built-in, the inputs can be either activated in factory or after the purchase, with only a password input through the keypad in the front panel. This makes an SD-SDI input become an SD/HD input within minutes. Input activation options: Audio monitoring A built in audio de-embedder, allows the user to extract embedded audio from the SDI signal. The audio can then be monitored by connecting the LM6015 to external audio monitoring devices through its two different outputs (analogue or AES/EBU). Picture in Picture (PiP) This function allows the user to monitor two signals at the same time. The secondary signal is displayed in a window. The position and size of the same are managed through the userfriendly On-Screen Display (OSD). LM6000X07: 2x PAL/NTSC LM6000X15: 1x PAL/NTSC with loop-through (not compatible with LM6000X07) LM6000X06: 2xSD-SDI with loop and audio de-embedding LM6000X08: 2xHD-SDI HD with loop and audio de-embedding (only after LM6000X06 has been activated) LM6000X09: 2xSD/HD-SDI with loop and audio de-embedding LM6015 - Technical Specifications LCD Panel Size 15” Resolution 1024x768 Active Area 304x228mm Aspect ratio 4:3 Pixel RGB Vertical Stripe Dot Pitch 0.297H 0.297V Viewing Angle 170º H/V Scope MTTF 50,000 Hours Brightness 300 cd\m2 Ta Contrast 450:1 Response time 8 ms Inputs DVI YPbPr RGB (VGA) DVI Composite UIT R-BT470 SMPTE 170M SMPTE-259M SMPTE-296M SMPTE-274M SD/HD-SDI SMPTE-260M 1080i(60,59.94,50), 576@50i, 480@60i 640x480, 800x600, 1024x768, 1280x1024, 1600x1200 640x480, 800x600, 1024x768, 1280x1024 2xPAL/NTSC/SECAM BNC 1.0 Vpp 75 Ω 2xBNC, BNC Return loses : 12 dB at 1,485 Gbps 576i@50, 480i@60 720p(60/59.94/50) 1080p(30/29.97/25/24/23.98) 1080sF(24/23.98), 1080i(60/59.4/50) 1035i(60/39.94) External Sync Remote Control Tally 2 BNC RS-485 connector SUB-D9 connector (Tri-colour) Outputs SD/HD-SDI 2xSD/HD-SDI outputs (active loop-through) 1xAnalogue audio (XLR connector) 1xAES-EBU (BNC connector) Audio General Dimensions 265mm (6U) x 446mm x 60mm Weight 3,9 Kg Power External PSU 100-240 VAC Power Consumption Operating Temperature Relative Humidity 39W (average power at 230VAC) 15º - 40º to meet specs. 10-90% non condensing at 40ºC Remote Control The LM6015 can be remotely controlled by using the RK5000 KROMA controller. Tri-colour tally Three different tally colours are available to show the current status of the video signal: red, yellow and green. Other On-Screen Display (OSD) functions - Markers and Safe Area - Blue Only - Cross Pulse - Overscan - External Sync - Preset Colour Temperatures: 5,000º, 5,500º, 6,500º, 7,500º, 9,300º Mounting options LM6000X80 LM6000X80: rack mounting kit LM5000X51: desktop adaptor (VESA 100) LM6000X05: back support for PSU LM6000X51 Distributed by ©KROMA TELECOM S.A. 2009. Specifications subject to change without prior notice. Reproduction of this document in whole or part without permission is forbidden.