Slim SATA to IDE Converter

Slim SATA to IDE Converter
Model: ADSSSAI
INTRODUCTION
The Addonics Slim SATA to IDE Converter is designed for the latest
slimline SATA 3.0Gbps interface with new notebook optical drives
allowing them to be converted into the commonly used 3.5" IDE
connection. Attached easily to the back of the connector, this small
converter board is ideal solution for rack mount PCs, blade servers,
Mini-ITX systems, or small equipment requiring an optical drive
which do not have the slim SATA interface.
Slim ATAPI SATA to IDE Converter
Mounting Bracket (ADSSSAIBK)
FEATURES
SPECIFICATIONS
• Connect any type of SATA 1.5Gbps or 3.0Gbps
slim devices through standard 40-pin IDE connec
tion
• Ideal for Rack Mount System, Server, Network
Attached Storage and Mini ITX
• Optional mounting frame and Screws
• Hot swappable SATA connection
• Supports SATA II transfer rate of 3.0 Gbps
• Supports Blu-Ray slimline optical drives
• SATA Power Save modes
• Supports IDE Master, Slave, and Cable Select
modes by jumper setting
• OS Independent hardware bridge converter
support any operating system with no driver
required
• RoHS Compliant
• Molex Slim SATA (Data+Power) & IDE 40Pin
2.54mm male & Molex Power connectors on board
• Compliant with Serial ATA 2.6
• ATA/ATAPI PIO mode data transfer
• ATA/ATAPI UDMA data transfer rate of 150, 100, 66,
44, 33, 25, 16.7 MB/s
• ATA/ATAPI-7 Streaming feature set
• Tag Command Queuing (Max 32 entries)
• RoHS Compliant
• OS Independent hardware bridge converter support
any operating system with no driver required
• 1 year warranty
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588