metal finishing - NGL Technology

CLEANING TECHNOLOGY
METAL FINISHING
HIGH PERFORMANCE
WHAT’S YOUR PROBLEM ?
ISO 9001
CERTIFICAT SQS No. 11443
ISO 14001/
OHSAS
18001
CERTIFICAT SQS No. 30865
ECOLOGICAL CLEANING CONCEPT
SWISS QUALITY
What’s your problem?_A
23/02/11
WHAT’S YOUR PROBLEM ?
SOLUTION
IN CHAPTER
TO REMOVE
1.
POLISHING COMPOUNDS, OILS, ADHESIVE RESIDUES BY ULTRASONIC.
2.
OILS & GREASES BY SPRAY OR ULTRASONIC.
3.
PREPARATION PRIOR TO P.V.D.
4.
CLEANING & FINISHING PRIOR TO HOT AIR DRYING
5.
DEOXIDIZATION.
6.
PROTECTION AGAINST OXIDATION.
7.
TRIBO-FINISHING.
8.
REMOVING LACQUERS & VARNISH.
9.
REMOVING OILS OR ZAPON BY ULTRASONIC OR BY SPRAY.
10.
ANTI SCRATCH LACQUER.
11.
REMOVING OILS IN INTER-OPERATIONAL CLEANING :
BARREL-TOP DEGREASER / ULTRASONIC / TO REPLACE BENZINE CLEANERS.
12.
REMOVING SOLDERING FLUXES.
13.
CLEANING PARAMETERS CONTROL.
14.
DI WATER RINSE QUALITY CONTROL.3.
15.
WASTEWATER TREATMENT PROCESS.
16.
IMPURITIES PRECIPITATION SYSTEM.
WHAT’S YOUR PROBLEM ?
21/02/11
PAGE 1
PRODUCTS
METAL FINISHING
To remove
Recommended
product
From
GALVEX 18.01
• ALL METALS
or
• OILS
pH
+
L
10.5
Instructions
for use
Concentration : 3 to 5%
Temperature : 55 to 70°C
Time
: 3 to 5 min
US
GALVEX 17.30
PLUS
• ALL METALS
or
• ADHESIVE
RESIDUES
L/P
US
1
• POLISHING
COMPOUNDS
and OIL
RESIDUES
+/-
+
L
10.8
GALVEX 17.30
SP.P
+
L
10.5 Concentration : 2 to 5%
NANOCLEAN
+
L
(TARNISHING FREE ON
COPPER METALS)
• ALL METALS
EXCEPT
ALUMINIUM
US
• BRASS
• ALL METALS
EXCEPT
ALUMINIUM
•
•
•
NANOCLEAN
NANOCLEAN
NANOCLEAN
Temperature
Time
• ALL METALS
SUPRA
100
95
DECOSPRAY TM
: 60 to 75°C
: 3 to 5 min
14
- emulsifying property
- separates oils
- for large quantities of oils
SPRAY or US
2
Concentration : 3 to 5%
Temperature : 55 to 70°C
Time
: 3 to 5 min
+
L
9.6
+
L
14
+
L
13.7
+
L/P
Concentration : 2 to 5%
Temperature : 60 to 75°C
Time
: 2 to 5 min
NB: with oil separator
• OILS &
GREASES
3
• PREPARATION prior to
P.V.D.
LEGEND:
SPRAY or US
• STEEL
• H.S.S.
• HARD METAL
• STEEL
• H.S.S.
• STAINLESSSTEEL
• HARD METAL
+
L/P
DECOSPRAY 347
DECOSPRAY 440
Concentration : 3 to 5%
Temperature : 50 to 65°C
Time
: 2 to 5 min
LINE
VACUKLEEN
See data sheet
(NO COBALT LEACHING)
: BIODEGRADABLE
: LIQUID or POWDER
US
n.m.
: NON BIODEGRADABLE
: ULTRASONIC
: NON MEASURABLE
www.ngl-cleaning-technology.com
NGL CLEANING TECHNOLOGY SA
7, chemin de la Vuarpillière • CH-1260 Nyon, Switzerland
Tel.: +41 (0)22 365 46 66 • Fax: +41 (0)22 361 81 03
E-mail: [email protected]
THE COMPLETE SOLUTION:
EXPERTISE in
CLEANING & RECYCLING PROCESSES
PAGE 2
PRODUCTS
METAL FINISHING
To remove
Recommended
product
From
NGL 17.40 P.SP *
(DECONTAMINATION).
• GLASS
pH
Instructions
for use
9.3
Concentration : 5 to 20 g/l
Temperature : 40 to 70°C
Time
: 1 to 5 min
* Liquid version: HELIT FINISH
Light alloys : GP 17.40 SUP.
+
P
<1
Concentration : 3 to 5%
Temperature : 45 to 65°C
Time
: 2 to 5 min
* on polished aluminium
7.7
Concentration : 3 to 5%
Temperature : 40 to 70°C
Time
: 2 to 5 min
9.9
Concentration : 2 to 5%
Temperature : 45 to 65°C
Time
: 2 to 5 min
SPRAY or US
• FINISHING
• SAPPHIRE
prior to HOT • NICKEL SILVER
AIR DRYING • BRASS
FINISH 200
• STAINLESS
STEEL
+
L
US
SUPER HELIT IC
GALVEX 17.89
SUPRA
• SENSITIVE
STEEL
• OXIDATION
and OILS
L/P
US
4
5
+/-
US
• STEEL
• H.S.S.
• HARD METAL
+
+
L
L
LINE
ACID CLEANER
+
L
See data sheet
6
• PROTECTION • STEEL
(in final DI water)
ANTI
OXIDATION
KORROSTOP 5000
77
• TUMBLING
LEGEND:
+
L
Concentration : 0,02 to 0,1%
: 20 to 30°C
Time
: 2 to 3 min
12.3 Temperature
LINE
• BRASS
• COPPER ALLOYS
+
L/P
TRIBO
: BIODEGRADABLE
: LIQUID or POWDER
See data sheet
US
n.m.
: NON BIODEGRADABLE
: ULTRASONIC
: NON MEASURABLE
www.ngl-cleaning-technology.com
NGL CLEANING TECHNOLOGY SA
7, chemin de la Vuarpillière • CH-1260 Nyon, Switzerland
Tel.: +41 (0)22 365 46 66 • Fax: +41 (0)22 361 81 03
E-mail: [email protected]
THE COMPLETE SOLUTION:
EXPERTISE in
CLEANING & RECYCLING PROCESSES
PAGE 3
PRODUCTS
METAL FINISHING
To remove
8
• VARNISH
• LACQUER
• PITCH
Recommended
product
From
• ALL METALS
• SYNTHETIC
STONES
ALLSTRIP
+/-
L/P
+
L
pH
Concentration : 100%
: 20 to 40°C
Time
: 2 to 10 min
n.m. Temperature
n.m.
Concentration : 100%
Température : 20 to 40°C
Time
: 3 to 10 min
• aerosol :
SCHUTZLACK NGL
2002 ROSE
• spray or dipping :
SCHUTZLACK NGL
2005 ROSE SPL
9
• OILS
• ZAPON
• ALL METALS
RUBIFIN N ° 4
+
L
10
• ANTI
SCRATCH
LACQUER
• ALL METALS
SCHUTZLACK NGL
11
BIO-TOP 10
(TO SUBSTITUTE
• ALL METALS
SOLVENT)
(MANUAL
• OILS
CLEANING)
GRINDING
& POLISHING
COMPOUNDS
12
• FLUX
L
n.m
+
L
7.5
+
L
10.5 Temperature
GREEN LINE
NEOCLEAN SUPER
• PCB’S
• RACK CLEANER
ELECTRONICS
LEGEND:
-
GREEN LINE
• OILS
+
L/P
NGL 17.13 SUPER
: BIODEGRADABLE
: LIQUID or POWDER
Instructions
for use
-
US
n.m.
L
Concentration : 2 to 10%
Temperature : 25 to 60°C
Time
: 2 to 10 min.
Concentration : 2 to 5%
: 65°C
Time
: 3 to 10 min
9.3
Concentration : 2 to 5%
Temperature : 45 to 65°C
Time
: 3 to 5 min
: NON BIODEGRADABLE
: ULTRASONIC
: NON MEASURABLE
www.ngl-cleaning-technology.com
NGL CLEANING TECHNOLOGY SA
7, chemin de la Vuarpillière • CH-1260 Nyon, Switzerland
Tel.: +41 (0)22 365 46 66 • Fax: +41 (0)22 361 81 03
E-mail: [email protected]
THE COMPLETE SOLUTION:
EXPERTISE in
CLEANING & RECYCLING PROCESSES
PAGE 4
NGL EQUIPMENT
Equipement
Objectif
13
Measuring of physicalchemical parameters
having an influence on the
cleaning quality
UPC 3000
ULTRASONIC PROCESS
CONTROLLER
14
Simple and quick control
of rinsing water quality
15
Waste water processes
prior to disposal
Principe
ACC 2000
ACQUA CLEAN CONTROL
DECOFLOC
DECOFLOC
DECOFLOC
770
660
HF
16
Simple and quick control of the parameters with 3 sensors (Complete documentation at request).
Enables a quick optional control of Di
water quality. It complements conductivity measurement.
Easy separation of solid particles from
aqueous fluids (quartz, cerium and
aluminium oxides, silicium carbide).
Only one reagent with unique properties.
insolubility of metals
Impurities precipitation
system
DECOFLOC MB
agent for coagulation
agent for flocculation
NGL ChemicalsEnvironment : The Right Connexion
DECOFLOC IPS
(Impurities Precipitation System)
nonstop treatment process
˚ mechanico-chemical polishing waste
˚ cutting waste
˚ rectification and milling emulsions
NGL CLEANING TECHNOLOGY SA
7, chemin de la Vuarpillière • CH-1260 Nyon, Switzerland
Tel.: +41 (0)22 365 46 66 • Fax: +41 (0)22 361 81 03
E-mail: [email protected]
THE COMPLETE SOLUTION:
EXPERTISE in
CLEANING & RECYCLING PROCESSES
PAGE 6
PIONEER
IN HIGH PRECISION
CLEANING PROCESSES
FOR THE HIGH-TECH
PROCESS
RELIABILITY
ISO 9001
DISTRIBUTEUR:
CERTIFICATE SQS No. 11443
ISO 14001/
OHSAS
18001
CERTIFICATE SQS No. 30865
NGL CLEANING TECHNOLOGY SA
7, Ch. de la Vuarpillière • CH 1260 NYON - Switzerland
Tél.+41(0) 22 365.46.66 • Fax: +41(0) 22 361.81.03
E-mail: [email protected]
Web: www.ngl-cleaning-technology.com
A - MARCH 2011