T6 Downright Housing (Remodel) w/ Baffle w

PROJECT INFORMATION
PROJECT:
TYPE:
CATALOG#:
T6 Downright Housing (Remodel) w/ Baffle w/ Prismatic Lens
LHCM6 SERIES - 6" ARCHITECTURAL HID T LAMP RECESSED LIGHTING
9 1/4"
6 5/8"
7 1/2"
12 7/8"
SPECIFICATION
FEATURE(S):
Ceiling cut-out: 6 3/4"
HID 70W Max T6/ T4.5 G12
Application: Architectural-grade recessed downlight housing for low to medium height
ceilings and commercial installations. A variety of trims, compatible styles and finishes are
available to achieve the proper décor and illumination.
Housing Frame: 16 gauge galvanized plaster ring with powder coat finish, six friction clips
secure trim to housing for ceilings up to 1" thick. Triple slot bat-wing hanger brackets
accommodate multiple bar hanger systems.
Application: Architectural-grade recessed downlight reflector for
low to medium height ceilings for commercial and architectural
installations. Reflector designed for minimal glare from lamp
without sacrificing lumen output. Regressed tempered glass lens
allows for special control of light output. Protects lamp while
reducing lamp image.
Mounting: Housing suitable for existing or new construction installations, supplied with 4
high tension remodeling clips, designed to secure the housing to an existing sheet rock
ceiling up to 1" thick for fast and easy installation from below the ceiling line.
Mounting: Pre-punched key holes allow mounting of socket cap
assembly for housing, with vertically adjustable socket cap.
Reflector held in place with 6 steel pressure springs mounted on
housing frame.
Socket Cap: Extruded aluminum socket cap, 1 1/4" vertically adjustable socket arm with set
screw which enables the use of multiple lamp types and repositioning to optimize lamp
performance. Furnished with heat sink fins to vent lamp heat and extend lamp life. Accepts
compatible reflector trims.
Lamp Inclusion: Ceramic Metal Halide lamp can be supplied
with product packaging, use the following ordering codes:
LLMT6-20: 20W T6, LLMT6-39: 39W T6, LLMT6-70: 70W T6
Add "-T30" for 3,000K, "-T42" for 4,200K
Socket:
Socket:Pulse-Rated 4KV, porcelain Bi-Pin G12 socket with high temperature leads and
nickel-plated contacts.
Covered by a 3 Year Warranty to be free of defects in materials
and craftsmanship.
Junction Box: 16 gauge pre-wired galvanized steel double Junction Box, 64 cubic-inch for a
maximum of (8) #12 AWG wires. Furnished with (10) 3/4'', (2) 1" and (8) Romex knockouts. Strain clamps to install or remove covers for easy access and ground wire. Equipped
with safety standard die-cast aluminum fitting for flex-conduit.
Label: UL Listed, cETL Listed
Assembled in USA
Insulation Contact: Non IC rated housing must be kept 3” from insulation.
Label: cETL Listed
Assembled in USA
2012.8.29
5 5/8"
5 3/4"
T6 DOWNRIGHT HOUSING (REMODEL)
LHCM6R
BAFFLE W/ PRISMATIC LENS
LR6713
LR6713WWF
LR6713NNF
LR6713BWF
LR6713COCOF
LR6713MOMOF
FINISH
:White Baffle/White Flange
:Natural Baffle/Natural Flange
:Black Baffle/Black Reflector
:Copper Baffle/Copper Flange
:Mocha Baffle/Mocha Flange
Ordering example: LHCM6R070A-27/C260/LR6713WWF-CL
LENS TYPE
Blank :Prismatic Lens
-CF :Center-FrostTM
-CL :Clear
-FR :Frosted
ID#: 2072_1564
WATTAGE
BALLAST
OPTION
LHCM6R020A :20W Blank :Electronic (120V) Blank :None
LHCM6R039A :39W -27 :Electronic (277V) /C260 :(2)26" C- Channel Hanger Bars
LHCM6R070A :70W
/L270 :(2)27" Linear Hanger Bars
7 1/2"
A
Tel: 323.904.0200
File Located online www.liton.com/spec
Safety Labels: ETL/CETL listed. Suitable for damp locations. NYC approved: Calendar
#41937.
Product specifications subject to change without notice.
www.liton.com
D I V I S I O N
L I G H T I N G
O F
G R O U P