Traceability and Quality Control Tool Management

Transcription

Traceability and Quality Control Tool Management
D
RFI
Traceability and Quality Control Tool Management
– Allocation of knives and tools through RFID –
Knifeinspector easy: THE SOLUTION FOR TOOL
MANAGEMENT IN THE FOOD SERVICE INDUSTRY
Food industry and smaller operation units have waited a long time for a solution like this.
Knifeinspector easy is the perfect and reliable answer that helps to optimize traceability and increase efficiency of tool management. Knifeinspector easy is based on the innovative RFID-Technology.*
An uncomplicated and cost-saving control system which provides a full overview on your knives and tools
regarding inventory, history, status and allocation to the personnel at the push of a button.
eduction of costs: Manually compiled lists for administration and
R
tracking of tools, which are time and cost consuming, do not occur.
igher safety standards: Correct and clear allocation to a specific
H
employee. Defects can be related fast and appropriate.
F ewer thefts and losses: Each knife and tool can be clearly identified,
completely traced back and allocated to its actual user.
etter overall view: Exact cost analysis through easy evaluation
B
of the data and the individual knife consumption.
ore quality awareness: Consciousness of staff will be raised –
M
the quality awareness and sense of responsibility will be neightened.
aving of time: The RFID Reader can register several knives and tools
S
in the hygienic knife holder or the packing unit at the same time.
* RFID: radio-frequency identification.
Knifeinspector easy
ALL GOOD THINGS COME IN THREES:
HARDWARE, SOFTWARE AND THE RIGHT TOOL.
Knifeinspector easy consists of three system components:
01 | Hardware
The RFID Reader serves to register all knives and tools, each tool being
clearly allocated to a specific employee. It can be connected to any
standard computer by USB.
02 | Software
The software Knifeinspector easy 3.0 offers the following applications:
ool Management: Registration, status requests,
T
documentation, traceability and evaluation of the data.
dministration of personnel and article master data:
A
Registration of selected personnel data and transfer of article
master data from the external master records database of the
tool manufacturer.
valuation and analysis function: Besides status queries,
E
also additional reports can be requested, eg. tool history
or allocation of tool to employee.
03 | Tools
RFI
Special features of our RFID knives and tools:
D
All knives of the series DICK MasterGrip RFID and ExpertGrip RFID as well as
particular sharpening steels and units and cut and stab protections are available
with the RFID transponder and make the Knifeinspector easy system complete.
Integrated RFID chip with tamper-proof coding
Unambiguous allocation to specific members of staff
Replaces tedious and costly manual labeling or marking
Tried and tested MasterGrip handle: non-slip, non-abrasive and sanitary
Balanced hardness, significantly less consumption of materials
Long-lasting polished blade, corrosion-resistant
Knifeinspector easy
OUR RFID KNIFE AND TOOL ASSORTMENT:
Art. No
Description
Series
7 517 130-RF-19
Sharpening Steel round, 30 cm, standard cut
Regularcut
7 517 330-RF-19
Sharpening Steel oval, 30 cm, standard cut
Regularcut
7 550 330-RF-70
DICK polish, 30 cm
Dickoron
7 597 330-RF-19
DICK hygienic oval, 30 cm
Dickoron
7 598 330-RF-70
DICKORON oval, 30 cm
Dickoron
7 657 130-RF-19
Sharpening Steel round, 30 cm, fine cut
Finecut
7 657 330-RF-19
Sharpening Steel oval, 30 cm, fine cut
Finecut
9 008 400-RF-71
Magneto Steel HyperDrill
-
9 008 500 RF-71
Magneto Steel Polish
-
8 2868 13-RF-70
Boning Knife 13 cm, straight
MasterGrip RFID
8 2868 15-RF-70
Boning Knife 15 cm, straight
MasterGrip RFID
8 2881 13-RF-70
Boning Knife 13 cm, flexible
MasterGrip RFID
8 2881 15-RF-70
Boning Knife 15 cm, flexible
MasterGrip RFID
8 2882 13-RF-70
Boning Knife 13 cm, semi-flexible
MasterGrip RFID
8 2882 15-RF-70
Boning Knife 15 cm, semi-flexible
MasterGrip RFID
8 2891 13-RF-70
Boning Knife 13 cm, stiff
MasterGrip RFID
8 2891 15-RF-70
Boning Knife 15 cm, stiff
MasterGrip RFID
8 2825 21K-RF-70
Butcher Knife 21 cm
MasterGrip RFID
8 2825 26K-RF-70
Butcher Knife 26 cm
MasterGrip RFID
8 2168 13-RF-70
Boning Knife 13 cm, straight
ExpertGrip RFID
8 2168 15-RF-70
Boning Knife 15 cm, straight
ExpertGrip RFID
8 2181 13-RF-70
Boning Knife 13 cm, flexible
ExpertGrip RFID
8 2181 15-RF-70
Boning Knife 15 cm, flexible
ExpertGrip RFID
8 2182 13-RF-70
Boning Knife 13 cm, semi-flexible
ExpertGrip RFID
8 2182 15-RF-70
Boning Knife 15 cm, semi-flexible
ExpertGrip RFID
8 2191 13-RF-70
Boning Knife 13 cm, stiff
ExpertGrip RFID
8 2191 15-RF-70
Boning Knife 15 cm, stiff
ExpertGrip RFID
8 2117 21-RF-70
Fish fillet Knife 21 cm, semi-flexible
ExpertGrip RFID
8 2159 15-RF-70
Boning Knife 15 cm, wide
ExpertGrip RFID
8 2106 15-RF-70
Sticking Knife 15 cm
ExpertGrip RFID
8 2106 18-RF-70
Sticking Knife 18 cm
ExpertGrip RFID
8 2106 21-RF-70
Sticking Knife 21 cm
ExpertGrip RFID
8 2125 21-RF-70
Butcher Knife 21 cm
ExpertGrip RFID
8 2125 26-RF-70
Butcher Knife 26 cm
ExpertGrip RFID
9 0240 01-RF
Hygienic Knife Holder Type 240 , 4 knives and 2 sharpening steels
9 0208 01-RF
Hygienic Knife Holder Tpye 208, 10 knives and 2 sharpening
steels with holder for metal mesh glove
9 1655 00 to 04-RF
Metal Mesh Glove, sizes XS-XL
9 1658 00 to 04-RF
Metal Mesh Glove with 19 cm cuff, sizes XS-XL
9 1650 00-RF
Metal Mesh Apron 55 x 80 cm
Further products upon request.
Friedr. Dick GmbH & Co. KG . Esslinger Straße 4-10 . 73779 Deizisau / Germany
Phone +49 7153 817-0 . Fax +49 7153 817-219 . [email protected] . www.dick.de