Offshore Handling Equipment - Canrig Drilling Technology

Offshore Handling
Equipment
“Helping Our Customers Achieve Superior Results”
Offshore Handling
Equipment
Product
Jack-Up
Semi / Drillship
Derrick
•
•
Top Drive / Dolly Retract
•
•
Drawworks
•
•
Torque Wrench
•
•
Drilling Controls
•
•
Pipe Racking
•
•
Horizontal Pipe Handling
•
Standbuilding
•
Knuckleboom Cranes
•
Handling Equipment
•
•
Drill Floor Manipulator
•
•
Hydraulic Power Units
•
•
Tailing Arm / Casing Arm
•
•
Conductor Tensioning
•
Tubular Handling Systems
•
Riser Handling Systems
•
•
•
Splashzone Guidance
•
•
Subsea Handling Systems
•
•
BOP Handling Systems
•
•
STANDBUILDING ARM
During testing at one of our Houston facilities.
DerrickS
Canrig has a standard range of designs for
static and dynamic applications.
The company has provided designs in metric,
imperial and Chinese standards.
CANRIG designs include:
•
•
•
•
•
•
•
•
•
•
•
•
Guide Rails
Water Table
Crown Block
Fast-Line Routing
Dead-Line Routing
Gin Pole
Tong Counterweight
Tugger/Manrider Routing
Hydraulics
Electrics
Pneumatics
Service Lines
Canrig supplies derricks to ABS, DNV or any
other classification requirement.
Canrig’s racking module is a patented design.
The racking module is complete with bridgecrane,
mechanized racking board, control cab and a
dedicated power unit.
Canrig is able to supply complete handling
packages for jack-up drilling rigs.
The company has added a range of handling
products to their already substantial product
portfolio.
TheSE products include:
•Derricks and Crowns
•Pipe Racking Systems and Boards
•Standbuilding Systems
•Horizontal Pipe Handling (pipe deck to drill floor)
•Top Drives / Retractable Dollies
•Torque Wrenches
•Drawworks
•Casing Stabbing Boards
•Casing Stabilizing Arms
•Lower Racking Arms
•Drill Floor Manipulator Arms
•Drill Floor Tools
•Hydraulic Power Units
Canrig can supply simple mechanized systems
or fully automated, hands-free systems.
The two images show the diversity of our systems
from a monotower system to our simple, lightweight
system (pictured right) which is a TRUE ONLINEOFFLINE SYSTEM representing major commercial
advantages as well as increased efficiency in
casing operations.
CANRIG also supplIES a range of Cellar
Deck Solutions:
•
•
•
•
BOP Handling
Cantilever Skidding
Drill Floor Skidding
Conductor Tensioning
Drill Floor Manipulator Arm (DFMA)
Canrig’s DFMA is used for a variety of drill floor
duties ranging from racking of tubular to tailing of
casing and risers.
The DFMA can be underslung as shown or floor
mounted. It comes with a range of heads for
handling collars or risers with buoyancy modules.
Tubular handling
Canrig offers a range of products
including gantry cranes, jib arm
handling, catwalk machines,
conveyors, grab lift and magnetic lift.
Tailing Arms and Stabilizing Arm
Canrig has a range of tailing arms for
mounting in the derrick which are used
to stabilize tubulars at the well center.
Riser Management - Horizontal
Canrig has a complete Riser Management System that
provides the positioning of equipment from the storage rack
to the well center.
•
•
•
•
•
•
Riser Gantry Cranes
2 Cart Handling
Riser Catwalk (as shown)
Tailing Arm
Riser Spider
Riser Storage Frames
Riser Management - Vertical
Canrig provides a complete vertical
riser handling system including
gantry crane, racking boards and
elevating frame.
Conductor Tensioning Unit (CTU)
Canrig’s conductor tensioning units are built
to suit precise requirements of the jack-up.
Hydraulic Power Units
Canrig provides a range of power units
from dedicated units (dedicated to
a particular piece of equipment) to
centralized power units (4 x 200HP).
Power units can include acoustic
enclosure and air cooling systems.
BOP Handling on Drillships and Semisubmersibles
Another way to handle subsea equipment is by cart and
overhead cranes.
Canrig can supply cart and crane systems, which includes
bulkhead guidance, integrated splashzone guidance, insert
trolley for trees, auxiliary hoist on crane (for service work)
and a retractable test stump frame.
Canrig offers a consultancy service
whereby we specify the most cost-effective
system within the physical constraints of
the rig and the client’s budget.
Subsea Handling Systems (BOP, Xmas trees)
Subsea handling equipment needs to be simple, robust
and reliable. Canrig has a range of equipment which
is grouped together to provide the best systems.
TheSE products include:
•
•
•
•
•
BOP Transporter
BOP Cart
BOP Service Crane
Baseplate Trolley
Tree Trolley
•
•
•
•
•
Skidding Systems
BOP Chain Hoists
Bulkhead Guidance Frames
Retractable Test Stumps
Dedicated Power Unit
The most common handling system on a
semisubmersible is the BOP transporter,
with sideways skidding and baseplate/tree trolley.
BOP Handling on a Jack-up or Land
This system is able to test the BOP in full assembly.
The BOP on a jack-up is lighter and the handling is often
simpler. Canrig provides a range of chain hoists, elevators
and transporter cranes.
Splashzone guidance
Canrig provides a robust splashzone guidance unit which is
telescopic and mounted on the underside of the moonpool.
This system restrains the BOP while in the splashzone.
General Information
www.canrig.com
Sales Information
[email protected]
Canrig Support
(866) 433-4345
Telephone
(281) 774-5600
Fax
(281) 774-5610
Postal Address
Corporate Headquarters
8223 Willow Place Drive South
Houston, TX 77070
USA
1404