Motor Repair Manufacturers and Prototypes

Motor Repair Manufacturers and Prototypes
Our production flexibility and technologies allow us to manufacture single unit or large quantities with short lead times and fast
deliveries. The most efficient way to operate for repair manufacturer is to use our stock list.
If you need to repair
a DC motor and need
only one commutator.
If your goal is to make
one or several prototypes
or special motors.
Buy it directly
from our stock list
Very easy to use:
• Start to check:
- the brushtrack Ø (our list goes from
smaller to larger brushtrack)
- the number of segments
- the riser Ø and the copper length
The choice is so large that you have
every chance to find a commutator
available from our stock.
• Select one or more commutators and
ask us for a quotation
[email protected]
or fax : +33 389 762 181
• We can also adapt and change many
dimensions according to your wishes:
- reduce the lengths, riser and
brushtrack Ø
- reduce or increase the bore Ø
- slot dimensions
- etc...
In case you do not find the commutator
in our stock list, send us your specific
request using either the enclosed form
or your own drawing.
More than
600 different
large commutators
available from
our stock list !
Company name :
Company address :
From :
E-mail : Date :
Phone : Fax :
1 rue de l’artisanat - Zone industrielle
France - 68500 GUEBWILLER
Tel. : + 33 389 760 220 - Fax : + 33 389 762 181
E-mail : [email protected]
www.nelco-commutators.fr
Send to :
Request for moulded commutators, with the following dimensions :
RISER CONSTRUCTION : in the solid copper from the segment with added tin welded riser
QUANTITY
Number of segments
Riser Ø A
Brush track Ø B
Copper length C
Brush track length D
Bore Ø E
Front moulded flange F
Rear moulded flange G
Overall length H
Riser width I
Slotting width LF
Slotting depth HF
Keyway width R
Keyway depth S
Ventilation holes (cooling surfaces) :
full with 3 arms (ribs) with 4 arms (ribs)
Max speed :
Temperature :
Further details or special remarks :