Cormar Product Guide 2014

ELECTROMECANICA CORMAR
PRODUCT GUIDE 2014
ELECTRO
MECANICA
CORMAR
Introduction
Introducing ELECTROMECANICA CORMAR
For more than 45 years, Electromecánica Cormar S.A. has been dedicated to the development
and production of world class battery master switches.
Established in Granollers, Spain in 1968, Electromecánica Cormar is now located in Llinars del
Valles, a major industrial area in the busy economic hub of Barcelona. They not only service
the local market but deliver an extensive range of product to OEM and aftermarket customers
across the globe.
Electromecánica Cormar products are used in a myriad of transport and equipment
applications on land and sea, from stationary engines to massive haul trucks, small runabouts
to the largest yachts. If there is a need for a battery switch then there is a product from
Electromecánica Cormar for the job.
Amelec Australia are proud to be partnered with a manufacturer of such reputable standing as
Electromecánica Cormar and distribute their range of quality products throughout Australia
and New Zealand.
Original cover image courtesy of Caterpillar.
ELECTRO
MECANICA
CORMAR
Images left to right, courtesy of: Sicnag, Nachoman-au, Wouter Hagens, Ryan G. Wilber, Dleighuk.
75A
350A
24
IP61
automotive
4-5
500002
75A
350A
24
IP61
automotive
4-5
500020
75A
350A
24
IP61
automotive
4-5
500026
500027
500028
75A
80A
85A
200A
250A
300A
24
N/A
automotive
6
500023
100A
500A
24
IP63
automotive
7
500006
500008
150A
1000A
24
IP63
automotive
8
530100
150A
1000A
48
IP65
automotive
530101
150A
1000A
48
IP65
automotive
10
500010
250A
2500A
24
IP65
automotive
11
500009
250A
2500A
24
IP66
automotive
12
500018
250A
2000A
24
N/A
automotive
13
od
m
2
ap
pl
ica
tio
n
pe
(5 a k c
se ur
co re
nd nt
s)
m
a
of x v
co olt
nt ag
ac e
ts
en
v
pr iron
ot m
ec en
ti o ta
n l
500000
el
co
cuntin
rre uo
nt us
Contents
PAGE
9
ap
pl
ica
tio
n
pe
(5 a k c
se ur
co re
nd nt
s)
m
a
of x v
co olt
nt ag
ac e
ts
en
vi
pr ron
ot m
ec en
ti o ta
n l
co
cuntin
rre uo
nt us
m
od
el
Contents
PAGE
500013
300A
3000A
24
IP67
automotive
14
500024
300A
3000A
24
IP63
automotive
15
500015
350A
3500A
24
IP67
automotive
16
530110
250A
2500A
48
IP65
automotive
17
500001
75A
350A
24
IP67
marine
18-19
500043
75A
350A
24
IP67
marine
18-19
500021
75A
350A
24
IP67
marine
18-19
530102
150A
1000A
48
IP65
marine
20
500014
350A
3500A
24
IP67
marine
21
530111
250A
2500A
48
IP65
marine
22
530000
530001
530010
530011
300A
2400A
(1 second)
48
IP65
automotive/
marine
23-24
3
AUTOMOTIVE
Battery Master Switch
Single Pole 75A Continuous
A range of economical thermoplastic switches for vehicle
auxiliary circuits, stationary engines, generating sets, small
engines, etc. Available as a standard switch, with weather seal
boot and cap or as a key lock version.
500000 / 500002 / 500020
Specifications
CODE NUMBERS:
500000 - Standard
500002 - With weather seal protection
500020 - Lockable with removable key
GENERAL
Key/handle removable in OFF position only.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
500000
500002
500020
4
24VDC maximum
75/350 Amps sustained/ 5 secs.
Normally Open (N/O)
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Thermoplastic body and handle
IP61
-40°C to +85°C
135 Grams
155 Grams
150 Grams (with key)
OPTIONS
Zinc steel plated chain:
Order no. 520009
SPARE PARTS
Handle:
Key:
Order no. 500032
Order no. 520000 (code required)
AUTOMOTIVE
Diagrams
Connection
Fixing
5
AUTOMOTIVE
Chassis Isolator Switch
Single Pole 75A/80A/85A
Designed for isolating the negative wire in vehicles and
other applications where the chassis is grounded. Single
hole mounting in chassis with one connection provides
for a simple installation, particularly in confined spaces.
500026 / 500027 / 500028
Diagrams
Specifications
CODE NUMBERS:
500026 - 75A rating
500027 - 80A rating
500028 - 85A rating
d
a
GENERAL
Removable screw knob for safety and security
ELECTRICAL
Rated Voltage:
Rated Current:
500026
500027
500028
Configuration:
b
c
e
model
500026
500027
500028
30
36
45
a
26
32
42
b
26
32
37
c
5
5
4
d
e
M14 M8
M17 M10
M22 M11
Connection
Operating Temp:
Weight (nominal):
500026/27/28
Fixing
500026
6
500027
PHYSICAL
Termination:
500026/27/28
Stud Torque:
500026/27
500028
Contact:
Hardware:
Construction:
500028
SPARE PARTS
Knob:
500026
500027
500028
24VDC maximum
75/200 Amps sustained/5 secs
80/250 Amps sustained/5 secs
85/300 Amps sustained/5 secs
Normally Open (N/O)
M8/M10/M11 copper studs
12 ± 1.0 Nm
15 ±1.0 Nm
Brass
Plated steel nut and washers
Zinc plated steel body and
thermoplastic knob
-40°C to +85°C
65/105/195 Grams
Order code 520008
Order code 520026
Order code 520007
AUTOMOTIVE
Battery Master Switch
Single Pole 100A
Ideal for protecting valuable vehicles/equipment from
theft. Removable key in both on and off positions allows
for key to remain on driver’s/operator’s key-ring, whether
in storage or operation. Simple protection at low cost.
500023
Diagrams
Specifications
CODE NUMBERS:
500023
GENERAL
Lockable with key removable in both ON and OFF
positions.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Connection
Fixing
Environmental:
Operating Temp:
Weight (nominal):
SPARE PARTS
Key:
24VDC maximum
100/500 Amps sustained/ 5 secs
Normally Open (N/O)
M10 copper studs
15 ±1.0 Nm
Copper
Plated steel nuts and washers
Thermoplastic body with zinc
plated steel frame and plated
brass bushing.
IP63
-40°C to +85°C
210 Grams (with key)
Order code 520000
(code required)
7
AUTOMOTIVE
Battery Master Switch
Single Pole 150A
These quality metal switches are ideal for use in
vehicles, materials handling, agricultural and industrial
equipment applications, etc. Available in zinc plated
steel for general use and stainless steel for marine or
corrosive environments.
500006 / 500008
Diagrams
Specifications
CODE NUMBERS:
500006 - Zinc plated
500008 - Stainless steel
GENERAL
Removable handle with weather protection.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
500006
500008
Environmental:
Operating Temp:
Weight (nominal):
500006
500008
Connection
8
Fixing
24VDC maximum
150/1000 Amps sustained/ 5 secs
Normally Open (N/O)
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Zinc plated steel body and handle
304 stainless steel body and handle
IP63
-40°C to +85°C
260 Grams with handle and chain
255 Grams with handle and chain
SPARE PARTS
Handle:
500006
Order no. 520030
500008
Order no. 520002
Boot, chain and strap:
500006
Order no. 520022
500008
Order no. 520024
Boot and strap:
Order no. 520004
AUTOMOTIVE
Battery Master Switch
Single Pole 150A
A robust device ideal for a multitude of heavy current
switching applications in automotive, commercial and
industrial vehicles. Constructed from quality materials
and sealed to protect from harsh environmental
conditions.
530100
Diagrams
Specifications
CODE NUMBERS:
530100
GENERAL
Fixed handle with ergonomic grip is removable for
installation.
Tested to 200 hours salt spray resistance.
CLOSED
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
48VDC maximum
150/1000 Amps sustained/ 5 secs
Normally Open (N/O)
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
OPEN
Connection
Fixing
M10 copper studs
9 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic body with zinc
plated die cast frame and
thermoplastic handle.
Environmental:
IP65
Operating Temp: -40°C to +85°C
Weight (nominal): 240 Grams
SPARE PARTS
Handle:
Order no. 580011
9
AUTOMOTIVE
Battery Master Switch
Single Pole 150A
A robust device ideal for a multitude of heavy current
switching applications in automotive, commercial and
industrial vehicles. Constructed from quality materials
and sealed to protect from harsh environmental
conditions.
530101
Diagrams
Specifications
CODE NUMBERS:
530101
GENERAL
Removable heavy duty handle.
Tested to 200 hours salt spray resistance.
CLOSED
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
OPEN
Connection
10
Fixing
48VDC maximum
150/1000 Amps sustained/5 secs
Normally Open (N/O)
Environmental:
Operating Temp:
Weight (nominal):
M10 copper studs
9 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic body with
zinc plated die cast frame and
die cast handle.
IP65
-40°C to +85°C
340 Grams
SPARE PARTS
Handle:
Order no. 580019
AUTOMOTIVE
Battery Master Switch
Single Pole 250A
Designed for switching high current loads in various
automotive, commercial and industrial vehicles. This
high performance switch is constructed from quality
materials and sealed to protect from harsh
environmental conditions.
500010
Diagrams
Specifications
CODE NUMBERS:
500010
GENERAL
Removable heavy duty handle with retaining chain.
Includes weather protective boot and seal.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Connection
Fixing
Environmental:
Operating Temp:
Weight (nominal):
SPARE PARTS
Handle:
Handle, chain,
boot and strap:
Boot and strap:
24VDC maximum
250/2500 Amps sustained/5 secs
Normally Open (N/O)
M10 copper studs
15 ± 1.0 Nm
Copper
Steel nuts and washers
Reinforced plastic body with
zinc plated stamped steel
frame and handle.
IP65
-40°C to +85°C
565 Grams
Order no. 520009
Order no. 520020
Order no. 520003
11
AUTOMOTIVE
Battery Master Switch
Double Pole 250A
Designed for switching high current loads in various
automotive, commercial and industrial vehicles. This high
performance switch is constructed from quality materials
and sealed to protect from harsh environmental
conditions.
500009
Diagrams
Specifications
CODE NUMBERS:
500009
GENERAL
Removable heavy duty handle with retaining chain.
Includes weather protective boot and seal.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
24VDC maximum
250/2500 Amps sustained/5 secs
Normally Open (N/O)
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
M10 copper studs
15 ± 1.0 Nm
Copper
Steel nuts and washers
Reinforced plastic body with zinc
plated stamped steel frame and
handle.
Environmental:
IP66
Operating Temp: -40°C to +85°C
Weight (nominal): 1 Kilogram
Connection
12
Fixing
SPARE PARTS
Handle:
Handle, chain,
boot and strap:
Boot and strap:
Order no. 520029
Order no. 520020
Order no. 520003
AUTOMOTIVE
Battery Master Switch
Single Pole 250A
This heavy duty switch features a die cast zinc housing
and strong T handle. It is ideal for a multitude of heavy
current switching applications in automotive, commercial
and industrial vehicles.
500018
Diagrams
Specifications
CODE NUMBERS:
500018
GENERAL
Pull and turn action to isolate, twist release for
instant on.
Fixed handle is removable and replaceable.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
24VDC maximum
250/2000 Amps sustained/5 secs
Normally Open (N/O)
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
M10 copper studs
15 ± 1.0 Nm
Copper
Plated steel nuts and washers
Reinforced plastic body with
zinc plated die cast frame and
die cast handle.
Operating Temp: -40°C to +85°C
Weight (nominal): 535 Grams
Connection
Fixing
SPARE PARTS
Handle:
Order no. 580019
13
AUTOMOTIVE
Battery Master Switch
Single Pole 300A
A robust switch designed for switching heavy current
in a myriad of automotive, commercial and industrial
vehicle applications. Featuring sealed construction,
anti-rotation stop, strong cast aluminium handle,
all in a compact housing.
500013
Diagrams
Specifications
CODE NUMBERS:
500013
GENERAL
Environmentally sealed to IP67 for high protection.
Fixed T handle is removable and replaceable.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
24VDC maximum
300/3000 Amps sustained/5 secs
Normally Open (N/O)
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Connection
Fixing
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic body with
zinc plated die cast frame and
die cast T handle.
Environmental:
IP67
Operating Temp: -40°C to +85°C
Weight (nominal): 515 Grams
SPARE PARTS
Handle:
14
Order no. 500031
AUTOMOTIVE
Battery Master Switch
Single Pole 300A
A lockable, robust battery switch designed for heavy duty
switching applications in automotive, commercial and
industrial vehicles. Featuring removable key, anti-rotation
stop, die cast frame, all in a compact housing.
500024
Diagrams
Specifications
CODE NUMBERS:
500024
GENERAL
For safety reasons, key is removable in OFF position
only.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
24VDC maximum
300/3000 Amps sustained/5 secs
Normally Open (N/O)
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic body with zinc
plated die cast frame and
stainless key barrel.
Environmental:
IP63
Operating Temp: -40°C to +85°C
Weight (nominal): 430 Grams (with key)
Connection
Fixing
SPARE PARTS
Key:
Order code 520000
(code required)
15
AUTOMOTIVE
Battery Master Switch
Single Pole 350A
A heavy duty device for switching super high current in
automotive, commercial and industrial vehicle applications.
Featuring sealed construction, robust die cast housing, die
cast T handle, all in a compact housing.
500015
Diagrams
Specifications
CODE NUMBERS:
500015
GENERAL
Environmentally sealed to IP67 rating for high
protection.
Fixed, heavy-duty die cast handle is non-removable.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
Connection
24VDC maximum
350/3500 Amps sustained/5 secs
Normally Open (N/O)
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Zinc die cast body with
reinforced plastic base and
aluminium die cast T handle.
IP67
-40°C to +85°C
710 Grams
Fixing
OPTIONS
With dependent
auxiliary circuit:
Order code 500016
With independent
auxiliary circuit:
Order code 500017
16
AUTOMOTIVE
Battery Master Switch
Double Pole 250A
A heavy duty device for switching high current in
automotive, commercial and industrial vehicle applications.
Featuring sealed construction, robust die cast housing,
thermoplastic T handle, all in a compact housing.
530110
Diagrams
Specifications
CODE NUMBERS:
530110
GENERAL
Environmentally sealed to IP65 rating for extra protection.
Ergonomically designed, fixed thermoplastic T handle is
non-removable.
Tested to 200 hours salt spray resistance.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
Connection
48VDC maximum
250/2500 Amps sustained/5 secs
Normally Open (N/O)
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Zinc die cast body with reinforced
plastic base and aluminium die
cast T handle.
IP65
-40°C to +85°C
985 Grams
Fixing
OPTIONS
With dependent
auxiliary circuit:
With independent
auxiliary circuit:
Order code 530112
(screw terminals)
Order code 530114
(QC terminals)
17
MARINE
Battery Master Switch
Single Pole 75A Continuous
A range of economical thermoplastic switches for auxiliary
circuits in many boats and yachts. Available as a standard
switch, with weather seal boot and cap or as a key lock version.
500001 / 500043 / 500021
Specifications
CODE NUMBERS:
500001 - Standard
500043 - With weather seal protection
500021 - Lockable with removable key
GENERAL
Key/handle removable in OFF position only.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
500001
500043
500021
SPARE PARTS
Handle:
Key:
18
24VDC maximum
75/350 Amps sustained/ 5 secs.
Normally Open (N/O)
M10 copper studs
12 ± 1.0 Nm
Copper
Brass nuts and washers
Thermoplastic body and handle
IP67
-40°C to +85°C
135 Grams
155 Grams
150 Grams (with key)
Order no. 500032
Order no. 520000 (code required)
MARINE
Diagrams
Connection
Fixing
19
MARINE
Battery Master Switch
Single Pole 150A
A robust device ideal for a multitude of heavy current
switching applications in boat and yacht applications.
Constructed from quality materials and sealed to
protect from harsh environmental conditions.
530102
Diagrams
Specifications
CODE NUMBERS:
530102
GENERAL
Fixed handle with ergonomic grip is removable for
installation.
Tested to 200 hours salt spray resistance.
CLOSED
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
48VDC maximum
150/1000 Amps sustained/5 secs
Normally Open (N/O)
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
OPEN
Connection
20
Fixing
M10 copper studs
9 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic body with zinc
plated and epoxy coated die cast
frame and thermoplastic handle.
Environmental:
IP65
Operating Temp: -40°C to +85°C
Weight (nominal): 240 Grams
SPARE PARTS
Handle with cap:
Cap:
Order no. 580011
Order no. 580010
MARINE
Battery Master Switch
Single Pole 350A
A heavy duty device for switching super high current
in many boat and yacht applications. Featuring sealed
construction, robust die cast housing, die cast T handle,
all in a compact housing.
500014
Diagrams
Specifications
CODE NUMBERS:
500014
GENERAL
Environmentally sealed to IP67 rating for high
protection.
Fixed, heavy-duty die cast handle is non-removable.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Connection
Fixing
Environmental:
Operating Temp:
Weight (nominal):
24VDC maximum
350/3500 Amps sustained/5 secs
Normally Open (N/O)
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Zinc die cast and epoxy coated
body with reinforced plastic
base and aluminium
die cast T handle.
IP67
-40°C to +85°C
710 Grams
OPTIONS
With dependent
auxiliary circuit:
Order code 5XXXXX
With independent
auxiliary circuit:
Order code 5XXXXX
21
MARINE
Battery Master Switch
Double Pole 250A
A heavy duty device for switching high current in many
boat and yacht applications. Featuring sealed
construction, robust die cast housing, thermoplastic
T handle, all in a compact housing.
530111
Diagrams
Specifications
CODE NUMBERS:
530111
GENERAL
Environmentally sealed to IP65 rating for extra protection.
Ergonomically designed, fixed thermoplastic T handle is
non-removable.
Tested to 200 hours salt spray resistance.
ELECTRICAL
Rated Voltage:
Rated Current:
Configuration:
PHYSICAL
Termination:
Stud Torque:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
Connection
M10 copper studs
15 ± 1.0 Nm
Copper
Brass nuts and washers
Zinc die cast and epoxy coated
body with reinforced plastic base
and aluminium die cast T handle.
IP65
-40°C to +85°C
985 Grams
Fixing
OPTIONS
With dependent
auxiliary circuit:
With independent
auxiliary circuit:
22
48VDC maximum
250/2500 Amps sustained/5 secs
Normally Open (N/O)
Order code 530113
(screw terminals)
Order code 530115
(QC terminals)
AUTOMOTIVE / MARINE
Electromagnetic Battery Switch
Single Pole 300A
A heavy duty remote operated contactor for switching high
current loads in commercial, industrial and marine transport
applications. Featuring sealed design, robust construction
and easy mounting, all in a compact housing.
530000 / 530001
Diagrams
Specifications
CODE NUMBERS
530000 – 12VDC
530001 – 24VDC
GENERAL
Low coil holding current. Surface mount U bracket.
Tested to 200 hours salt spray resistance.
ELECTRICAL – CONTROL CIRCUIT
Inrush Current:
530000/530001
7/4.5 Amps
Holding Current:
530000/530001
0.3/0.25 Amps
Engaging Voltage:
530000/530001
≥9/≥18 Volts
Disengaging Voltage:
530000/530001
≤4/≤6 Volts
Power Dissipation:
≤6 Watts
ELECTRICAL – POWER CIRCUIT
Rated Voltage:
48VDC maximum
Rated Current:
300/2400 Amps sustained/ 1 sec
Configuration:
Normally Open (N/O)
Fixing
PHYSICAL
Termination- Power:
Stud Torque - Power:
Termination - Control:
Stud Torque - Control:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
M10 copper studs
14 ± 1.5 Nm
M5 brass studs
4 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic base with black
zinc plated steel body and frame.
IP65
-40°C to +85°C
1.1 Kilogram
23
AUTOMOTIVE / MARINE
Electromagnetic Battery Switch
Single Pole 300A
A heavy duty remote operated contactor for switching high
current loads in commercial, industrial and marine transport
applications. Featuring sealed design, robust construction
and easy mounting, all in a compact housing.
530010 / 530011
Diagrams
Specifications
CODE NUMBERS
530010 – 12VDC
530011 – 24VDC
GENERAL
Low coil holding current. Recessed mount flat bracket.
Tested to 200 hours salt spray resistance.
ELECTRICAL – CONTROL CIRCUIT
Inrush Current:
530010/530011
7/4.5 Amps
Holding Current:
530010/530011
0.3/0.25 Amps
Engaging Voltage:
530010/530011
≥9/≥18 Volts
Disengaging Voltage:
530010/530011
≤4/≤6 Volts
Power Dissipation:
≤6 Watts
ELECTRICAL – POWER CIRCUIT
Rated Voltage:
48VDC maximum
Rated Current:
300/2400 Amps sustained/ 1 sec
Configuration:
Normally Open (N/O)
Connection
Fixing
PHYSICAL
Termination- Power:
Stud Torque - Power:
Termination - Control:
Stud Torque - Control:
Contacts:
Hardware:
Construction:
Environmental:
Operating Temp:
Weight (nominal):
24
M10 copper studs
14 ± 1.5 Nm
M5 brass studs
4 ± 1.0 Nm
Copper
Brass nuts and washers
Reinforced plastic base with black
zinc plated steel body and frame.
IP65
-40°C to +85°C
1.0 Kilogram
WARRANTY
Amelec Australia Pty Ltd warrants all Cormar products against defects in factory workmanship and
materials for a period of 12 months from final point of sale providing the item in question does not
exceed the manufacture date by more than 2 (two) years. Specific exclusions of this warranty apply
where the item in question has been misapplied or used for a purpose for which it is not designed or
intended; or altered in any way that would be detrimental to the performance or life of the product; or
opened or tampered with by an unauthorised party; or contaminated by oil, water, grease or other
substances; or subjected to misuse, negligence, excessive vibration or mechanical abuse; or damaged
as a result of incorrect connection or voltage. On any part or product found to be defective after
examination by Amelec Australia Pty Ltd or their authorised agent, Amelec Australia will only repair or
replace the merchandise through the original selling dealer. Amelec Australia assumes no
responsibility for diagnosis, removal and/or installation labour, loss of equipment use, loss of time,
inconvenience or any other subsequent expenses including freight costs. Save and except for the
express warranty set out above and to the maximum extent permitted by law, all conditions and
warranties which may at any time be implied by the common law, Trade Practices Act, Fair Trading Act
or any other State or Federal Act are excluded. To the extent that these cannot be excluded and where
the law permits, Amelec Australia liability in respect of any such condition or warranty shall be limited
at the option of Amelec Australia to the repair or the replacement of the goods or the supply of
equivalent goods or refunding the cost of the goods. Amelec Australia Pty Ltd A.B.N. 38 009 386 216
©2014 - Amelec Australia Pty Ltd. ABN 38 009 386 216.
All rights reserved. This catalogue may not be reproduced in full or part, by any means, without the express written
permission of the copyright owners.
Disclaimer: E & O.E. - the information and specifications detailed in this catalogue were deemed to be accurate at the
time of printing. Amelec Australia Pty Ltd reserves the right, subject to Australian law, at its discretion and without
notice, to change the information and specifications contained within.
16 Parkinson Lane, O’Connor
WA 6163 Australia
Phone +61 8 9331 3100
Fax
+61 8 9331 5150
Email [email protected]
Web www.amelec.com.au