starrett.com Promotion 10.3

Promotion 10.3
DualCut Jig Saw Blades
See Page C4
505P-7 Prtractor
See Page C1
795 Outside Micrometer
See Page 4
starrett.com
Sale Prices Valid through December 31, 2010
445 Depth Micrometer
See Page 4
798 Caliper
See Page 2
798A Electronic Calipers
• IP67 protection against coolant, water, dirt and dust
• Fine adjustment
• Heavy-duty 3.5mm bar and slide
• Hardened stainless steel measuring surfaces
• Linear accuracy meets DIN862
• Slide lock
• In/mm conversion
• .310" LCD display
• Zero at any position
• CR2032 3V battery
• Auto-off after 30 minutes
of non-use and display reactivation
with no loss of position
Cat No.
798A-6/150
798A-8/200
798A-12/300
EDP
20798
20799
20800
Range
0-6" 0-150mm)
0-8" (0-200mm)
0-12" (0-300mm)
Grad
Description
Electronic Caliper w/o Output
.0005"
Electronic Caliper w/o Output
(0.01mm)
Electronic Caliper w/o Output
Sale
$173.25
220.77
347.82
799 Electronic Calipers
• Lightweight, comfortable ergonomic design
• Large LCD display
No. 799 Series - Electronic Calipers
• Zero at any position
• Automatic off after 5 minutes with no loss of position
• Accuracy meets DIN862
• Resolution: .0005" (0.01mm)
• Includes fitted plastic case
Cat No.
799A-6/150
799A-8/200
799A-12/300
EDP
67410
67412
67621
Range
0-6" 0-150mm)
0-8" (0-200mm)
0-12" (0-300mm)
Grad
.0005"
(0.01mm)
Description
Electronic Caliper, w/o Outputw
Electronic Caliper, w/o Output
Electronic Caliper, w/o Output
Sale
$130.90
185.13
347.82
5006 Electronic Groove Caliper
• Ideal for measuring internal and external grooves on large
workpieces
• Hardened stainless steel construction
• Coolant resistant
• Generous diameter and jaw depth capacities
• CR2032 lithium battery provides over 1 year life with normal
use
• Resolution: 0.0005"/0.01mm
• RS232 output
• Includes wooden case
Cat No.
5006BZ-14/350
2
EDP
14589
Outside Range
0-12.5" (0-318mm)
Inside Range
1.654-15" (42-381mm)
Specifications subject to change
Description
Electronic Groove Caliper
Sale
$958.32
Promo 10.3
starrett.com
1202 Dial Calipers
125 Vernier Calipers
• Sharp, clear dial graduations
• Hardened stainless steel bar,
measuring surfaces, rack,
gears and depth rod
• High quality, basic vernier caliper that
offers inch and metric measurement
• Sharp, black graduations on the satin finished bar
• Lock screw for sliding jaw
• Thumb-operated fine adjustment roll
• Hardened stainless steel depth rod
• Lock screws for sliding jaw and adjustable dial bezel
• Knife-edge contacts
• Sharp, black graduations on the satin
finished bar
• Depth rod
• .001 (0.020mm) Grads
Cat No.
1202-4
1202-6
1202-8
1202-12
1202F-6
1202F-8
1202F-12
EDP
68814
66964
66979
66980
68931
69757
69758
Range
0-4"
0-6"
0-8"
0-12"
0-6"
0-8"
0-12"
Description
.001"
.100" per revolution
Fractional Dial Caliper
1/64th on yellow scale
.01" on white scale
Sale
$65.45
97.02
137.61
199.98
97.02
137.61
199.98
Cat No.
125MEA-6/150
125MEA-12/300
EDP
61660
61886
5004 Electronic Depth Gages
Tool Sets
• Hardened stainless steel construction
S905AZ Select Precision
Measuring Tool Set
• Coolant resistant
Range
0-6" (0-150mm)
0-12" (0-300mm)
Sale
$91.08
193.05
• Basic tools and a test
indicator for a wide variety of
measurements
• RS232 data transmission port
• CR2032 lithium battery will provide
over a year of life with normal use
• Includes case
• Protective wooden case
S766A Basic Electronic Tool Set
(without output)
• Resolution: 0.0005"/0.01mm
• Basic electronic starter set with
slide calipers and 1" (25mm)
micrometer
• Includes offset attachment
• Includes case
S909Z Basic Precision Measuring
Tool Set
• Includes three of the most
commonly used precision tools.
• Includes case
Cat No.
S766AZ
S905AZ
Cat No.
5004BZ-16/400
5004BZ-24/600
EDP
14584
14586
Description
0-16” (0-400mm) Range
0-24” (0-600mm) Range
Sale
$1,036.53
1,306.80
S909Z
EDP
Description
Basic Electronic Tool Set (w/o output):
12206 799A-6/150 6"/150mm Caliper &
3732XFL-1 1"/25mm Micrometer
Select Precision Measuring Tool Set:
T231XRL 1".25mm Micrometer, 120A-6
65805 6"/150mm Dial Caliper, C604RE-6
6"/150mm Rule, 711FSA Last Word®
Dial Test Indicator
Basic Precision Measuring Tool Set:
T436.1XRL-1 1"/25mm Micrometer,
65122
120A-6 6"/150mm Caliper, C604R-6
6"/150mm Rule
Specifications subject to change
Promo 10.3
Sale
$333.80
516.78
329.67
3
795 & 796 Electronic Outside Micrometers
• IP67 level of protection against coolant, water, dirt and dust
• Measurement HOLD button
• Balanced, tapered frame and hard, stable one piece spindle
• Resolution: .00005" (0.001mm)
• Zero tool at any position – retain and return to true zero
• Accuracies:
Inch: ±.0001",
Metric: ±.002mm
• Carbide faces
• Large, easy-to-read LCD readout
• Micro-lapped carbide measuring faces
• Auto-off after 20 minutes of nonuse
• Inch/millimeter conversion
Cat No.
795XFL-1
795XRL-1
796XFL-1
796XRL-1
EDP
67827
69085
67828
69089
Range
Description
Friction Thimble, With Carbide Faces, With Output
0-1"
Ratchet Stop, With Carbide Faces, With Output
(0-25mm) Friction Thimble, With Carbide Faces, Without Output
Ratchet Stop, With Carbide Faces, Without Output
Sale
$204.93
204.93
151.47
151.47
436.1 Outside Micrometers
• No glare Starrett satin chrome finish
• Micro-lapped measuring faces
• Staggered lines and distinct figures for readability
• Extremely hard and stable
one-piece spindle
• Rigid steel frame ribbed for extra strength
• T apered frame ideal for
narrow slots and tight places
• C
ombination ratchet and speeder for uniform
pressure and quick adjustment
• Balanced frame and thimble
Cat No.
T436.1XRL-1
T436.1XFL-1
T436.1XRL-2
T436.1XFL-2
T436.1XRL-3
T436.1XFL-3
EDP
67997
67999
68005
68007
68013
68015
Range
Grad
0-1"
1-2"
.0001"
2-3"
Description
Ratchet Stop, Lock Nut, Carbide Faces
Friction Thimble, Lock Nut, Carbide Faces
Ratchet Stop, Lock Nut, Carbide Faces
Friction Thimble, Lock Nut, Carbide Faces
Ratchet Stop, Lock Nut, Carbide Faces
Friction Thimble, Lock Nut, Carbide Faces
Sale
$115.83
115.83
136.62
136.62
169.29
169.29
3206 Micrometer Stand
445 Depth Micrometers
• Converts outside micrometer to a sturdy bench
gage for batch inspection of small parts
• Range: .001" or 0.01mm
• Handy bench vise or assembly
fixture
• 3" (75mm) base and 5/32" (4mm)
diameter measuring rods
• Ball joint construction
• Combination ratchet and speeder
• Positive lock on the base
• Ring-type lock nut
• Base dimension is 6-3/8" long x
3-1/2" wide x 3/4" thick
• Accommodates all Starrett 1/2" (13mm) and 1"
(25mm), 2 and 2A 2" and 210, 220, 483, 485,
569 special purpose outside micrometers
Cat No.
3206
4
EDP
68917
Description
Outside Micrometer Stand
Sale
$83.22
Specifications subject to change
Cat No.
445AZ-3RL
445AZ-6RL
445AZ-9RL
445AZ-12RL
Promo 10.3
EDP
52208
52212
52216
67117
Description
0-3" Range
0-6" Range
0-9" Range
0-12" Range
Sale
$199.98
241.56
297.99
401.94
starrett.com
3089 Dial Bore Gages
649 Spindle Squares
• Patented design
• Ground gaging surface
• Offers precision, a full compliment of features
and excellent value
• 3/8" inch shank diameter
• Ergonomic design with non-slip insulating grip
• 4" (100mm) between contact
points
• 2-point carbide contacts for extended wear
• Solid steel body construction
with durable black wrinkle finish
• Gage chart for quick and easy anvil selection
• All anvils laser marked for easy selection
• Fully assembled with two AGD Group 2 dial indicators
• Resolution: .0005"
• Approximately 4 lbs with custom case
• Includes sturdy aluminum case
• Approximately 6-3/4" (172mm) wide and 5-1/2" (140mm) from the
top of shank to the end of the contact points
Cat No.
649-1
649-5
649-1M
EDP
52080
52081
52082
Description
Spindle Square .250" range
Spindle Square .125" range
Spindle Square 2.5mm range
Sale
$178.20
188.10
188.10
Cat No.
3089Z-131-715J
3089Z-131-1424J
3089Z-131-26J
EDP
12456
12457
12458
Description
0.7-1.5" Depth
1.4-2.4" Depth
Sale
$207.90
207.90
232.65
823 Tubular Inside Micrometer Sets
78 & 78M Internal Micrometer Bore Gages
• Tubular measuring rods are
lightweight, yet extremely rigid
• 3 point ground carbide contact points
seat the internal micrometer faster
and more accurately than the spherical
contacts found in other gages
• Each rod is marked with length
• Hardened and ground anvils on
rods are adjustable for length
• Tungsten carbide measuring faces on
all 3-point heads above 1/2"
• Head anvil is hardened and
ground
• Ratchet stop
• Blind bore measuring capability above
1/2" diameter
• Interchangeable anvils
• Quick reading figures – every
thousandth numbered
• Convenient 5-1/2" (140mm)
handle
• Each micrometer bore gage is
furnished in a fitted case, complete
with setting ring, contacts, wrenches,
and instructions
• Protective Case • Resolution .00025"
Cat No. EDP
823AZ 53050
823BZ 53052
Description
1-1/2 - 8" Range with 5 Rods
1-1/2 - 12" Range with 8 Rods
Sale
$245.52
299.97
Cat No.
78XTZ-312
78XTZ-375
78XTZ-500
78XTZ-625
78XTZ-750
78XTZ-1
78XTZ-138
78XTZ-2
78XTZ-258
78XTZ-314
78XTZ-4
Specifications subject to change
EDP
68129
68130
68131
68132
68133
68134
67674
67675
67676
67677
67678
Range
1/4-5/16”
5/16-3/8”
3/8-1/2”
1/2-5/8”
5/8-3/4”
3/4-1”
1-1 3/8”
1 3/8-2”
2-2 5/8”
2 5/8-3 1/4”
3 1/4-4”
Sale
$631.13
594.66
598.40
563.81
580.64
655.44
906.95
981.09
1,183.83
1,167.82
1,566.13
Promo 10.3
5
25 Dial Indicators, Jeweled
711 Last Word® Test Indicators
• Smooth, jeweled lever action
• AGD Group 2
• Positive reversing switch
• 2-1/4" Dial Indicators
• Hard chrome-plated ratchet contact point
• Shockless, hardened steel gear train
and jewel bearings
• Swiveling tubular body
• Lug-on-center backs
• Easy reading half yellow dials
• .001" Graduations
• .030" Range, .001" Grad
• Stem cap is standard – top lift
available when specified
• Continuous reading double dial with
direct reading count hands
Cat No.
25-341/5J
25-341J
25-441/5J
25-441J
EDP
53285
53287
53293
53295
Range
.500"
1.000"
.500"
1.000"
Dial Reading
Grad
0-50-0
.001"
0-100
Sale
$121.77
121.77
121.77
121.77
Cat No.
711FSZ
711GCSZ
EDP
Description
52929 Indicator with Body Clamp
52943 Indicator Complete with All Attachments
• AGD Group 1 with lug-on-center back
• Angled head with 1-3/8" (35mm) dial
• Rugged and simple unit construction with
a “universally fitting” design
• Shockless, single bridge gear unit and
plate assembly with a hardened stainless
steel gear train and jewel bearings
• Three dovetail positioning mounts
• Precision gear-driven design with
smooth, jeweled movement
• Light but sturdy case, with a hardened,
precision stainless steel rack
• Satin chrome finish and fitted case
• Hardened stainless steel bottom stems
• Frictionally adjustable contacts reverse
automatically, maintaining clockwise rotation
Cat No.
708AZ
708ACZ
709AZ
709ACZ
EDP
Range
64212
.010"
64217
64214
.030"
64219
Grad
.0001"
.0005”
Description
without Attachments
with Attachments
without Attachments
with Attachments
Sale
$141.08
209.00
81 Dial Indicators
708 & 709 Dial Test Indicators
with Dovetail Mounts
• Narrow body for inreach ability
• Easy readability with balanced graduation
Sale
$250.47
315.81
213.84
260.37
Cat No.
81-141J
81-241J
81-131J
Range
EDP
(One Rev.)
53400
.100"
53428
53388 .050"
Total
Range
.250"
.125"
Dial
Reading Grad
0-50-0
.001"
0-100
0-25-0
.005"
Sale
$121.77
121.77
121.77
3600 Electronic Indicators
2700 Wisdom® BASIC Electronic Indicators
• AGD Group 2
• Glass scale with accuracy of ± two resolutions
• Simple, powerful, easy-to-use
• Inch/mm conversion, plus or minus travel
direction, maximum reading hold, zero at any
position, auto-off after 10 minutes of nonuse
• Large, easy-to-read LCD
• Reverse travel
• Rotating bezel
• Zero at any position
• RS232 output port
• L ug-on-center back plus
additional flat back
• 3/8" diameter stem
• 4-48 spindle thread
Cat No.
3600-5
3600M-5
6
• 711GCSG includes 3 contact points,
body clamp, universal friction holder with shank, universal shank with long and short arms,
double-jointed attachment, height gage attachment, surface gage
attachment, coupling with 3/16" (4.8mm) hole
EDP
Range
68813 .500" (12.5mm)
68918 12.5mm
Resolution
.0005" (0.01mm)
0.01mm
Sale
$140.25
148.50
Specifications subject to change
Cat No.
2720-1
2730-1
2740-1
2710-3
2730-0
2740-3
F2750-1
F2750-3
EDP
65816
65820
65824
65813
65819
65825
65847
65848
Promo 10.3
Range
.600” (15mm)
1” (25mm)
2” (50mm)
Resolution
.0001”
(0.002mm)
Sale
$512.82
539.55
882.09
495.99
584.10
843.48
1,397.88
1,361.25
starrett.com
196 Universal Back-Plunger Dial Indicators
679 Inspection Scopes
• Inch reading
• .001" graduations
• .200" range
• Three light intensity settings
• 1/4" shank diameter
• Water resistant shaft with high quality metal
tip
• Accurate, reliable, and simple to
operate
• Full color image sensor and dual solid state
LEDs provide imaging and illumination
• Rugged, with few moving parts
• Smooth operating
• 2.5" full color LCD screen displays live
video from the digital camera
• Case included
• Includes rugged, protective case
• High quality product made in the USA
Cat No. EDP
Description
196A1Z 50697 Universal Back-Plunger Dial Indicator
196B1 50699 Universal Back-Plunger Dial Indicator
Sale
$198.99
114.84
Cat No.
679-3
679-6
EDP
Description
60360 Inspection Scope w/3' Shaft
60361 Inspection Scope w/6' Shaft
Sale
$396.00
445.20
765 Electronic Snap Gage
5003 Carbon Fiber Snap Gages
• Balanced and compact for
comfortable handling
• Carbon fiber insulated handle
• Precise aluminum body
• Simple, logical controls
• Adjustable support ensures accuracy
• Easy-to-read LCD
• .200" (5mm) indicator range
• Light-weight aluminum frame
• Inch/millimeter conversion
• Single, 3-volt CR2032 battery
with easy access
• Zero at any position
• Manual ON/OFF with auto-off
after 7 minutes of non-use
Cat No.
765A
EDP
67659
• Linear Accuracy: ±.0010"
(±0.02mm)
• 0-1/2" (0-12.7mm) Range
• Resolution: .0005" (0.01mm)
Description
Electronic Snap Gage without Output
Sale
$108.90
Cat No.
5003Z-611-2J
5003Z-611-4J
5003Z-611-6J
5003Z-611-8J
5003Z-431-2J
5003Z-431-4J
5003Z-431-6J
5003Z-431-8J
EDP
12980
12981
12982
12983
12984
12985
12986
12987
Range
0-2" (0-50mm)
2-4" (50-100mm)
4-6" (100-150mm)
6-8" (150-200mm)
0-2" (0-50mm)
2-4" (50-100mm)
4-6" (100-150mm)
6-8" (150-200mm)
Grads
.001"
.0001"
.0005"
643 Dial Depth Gage
98 Machinists’ Levels
• Knife-edge base
• Seasoned cast iron bass, precision-machined
on reference surfaces with black wrinkle
finish on non-machined surfaces
• Hardened and ground needle
point contact
• Involute groove running the length of
the base provides a reliable seat for round work
• Conical point can be precisely
positioned for close work
• Ground and graduated vials housed
in a satin finished brass tube
• Point is 1/2" (12.7mm) long with a
60º included angle
Cat No.
EDP
643JZ
52714
Description
0-.125” Range, .0005” Grad,
0-25-0 Dial with Case
Sale
$1,530.93
1,709.62
1,889.36
2,091.05
1,432.70
1,611.39
1,791.13
1,992.82
• Main and cross test vials
allow simultaneous
leveling in both directions
Sale
$315.81
Cat No.
98-6
98-8
EDP
50441
50442
98-12
50443
Specifications subject to change
Description
6" (150mm) with Cross Test Vial
8" (200mm) with Cross Test Vial
12" (300mm) with Ground Single
and Cross Test Vials
Promo 10.3
Sale
$102.96
126.72
179.19
7
11 Combination Squares & Heads
435 & 9 Combination Squares
• Cast iron heads
• Cast iron heads with black wrinkle finish
• Hardened steel, machine divided blade with regular
or satin chrome finish
• Scriber & reversible lock bolt
• Scriber and reversible
lock bolt
• Direct reading double 180° protractor scale
• Spirit level in both square and protractor heads
• Hardened steel, machine divided blade with satin
chrome finish
• Spirit level (except 4")
• 4R grads - 8ths, 6ths, Quick Reading
32nds, 64ths
Cat No.
11H-4-4R
11H-12-4R
C11H-6-4R
C11H-12-4R
C11H-24-4R
H11-1224
C11-1224
EDP
50049
50055
56362
56366
56374
50071
50074
Description
4", 4R Grad, Regular Blade
12", 4R Grad, Regular Blade
6”, 4R Grad, Satin Chrome Blade
12”, 4R Grad, Satin Chrome Blade
24”, 4R Grad, Satin Chrome Blade
Cast Iron Square Head
Cast Iron Center Head
Sale
$56.43
64.35
73.26
77.22
133.65
42.57
29.70
Blades for Combination Squares,
Sets & Bevel Protractors
• 4R grads - 8ths,
16ths, Quick
Reading 32nds, 64ths
Cat No.
C435-12-4R
C9-12-4R
EDP
Description
66682 12", Reversible Protractor Head
50046 12", Non-Reversible Protractor Head
Sale
$193.05
193.05
622 6" Steel Rule with Decimal Equivalents
• Accurate, machinedivided graduations
• Inch Blades fits Combination
Squares, Sets and Bevel Protractors
• Fraction and decimal
equivalent table
• Spring-tempered steel
with no-glare satin finish
Cat No.
C622R-6
Cat No.
B12-4R
CB12-4R
CB12-16R
CB18-4R
CB18-16R
B24-4R
CB24-4R
CB24-16R
EDP
50083
50084
50087
50089
50091
50092
50093
50096
Length
12"
18"
Finish
Regular
Satin Chrome
Satin Chrome
Regular
24"
Satin Chrome
Grads
4R
16R
4R
16R
4R
16R
Sale
$37.13
36.94
51.43
72.00
82.28
77.22
88.83
100.05
EDP
Description
56660 10R
Sale
$22.28
Steel Rules
• Fine quality steel
• Accurate, precise
and readable
Cat No.
C303R-6
C305R-6
C310K-6
C316R-6
3020 Toolmakers' Grade
Stainless Steel Squares
• Squareness accuracy to 0002" (0 005mm)
for every 6" (150mm)
• Hardened, ground and lapped stainless steel
on both blade and beam
• Inner corner of beam machined for clearance
8
EDP
3020-3
12225
3020-6
12227
3020-12
12228
Length
Description
2-31/32" (75mm) Blade; 1-31/32"
(50mm) Beam
5-29/32" (150mm) Blade; 3-29/32"
(100mm) Beam
12-1/32" (300mm) Blade; 6-7/8"
(175mm) Beam
Sale
$72.16
132.00
271.92
Specifications subject to change
C604R-6
52678
CH604R-6
52673
C604RE-6
52660
C636EM-6
57064
C305R-12
C316R-12
C604R-12
51348
51375
52679
6"
Semi-Flexible, End
Graduations
Spring-Tempered
Spring-Tempered,
Reversible Hook
Spring-Tempered,
End Graduations
Spring Tempered,
mm & inch Grads
Full-Flexible
12"
CH604R-12 52674
C636-300
52635
300mm
C604R-18
C304R-24
C305R-24
C604R-24
52680
56645
51350
52681
18"
Promo 10.3
Description
Full-Flexible
C304SRE-6 51343
• High quality, non-graduated
toolmakers’ square
Cat No.
EDP
51334
51347
56701
51374
24"
Spring-Tempered
Spring-Tempered,
Reversible Hook
Spring Tempered,
mm & inch Grads
Sping-Tempered
Full-Flexible
Spring-Tempered
Grads
3R
5R
10R
16R
4R
Sale
$17.82
19.31
13.31
19.80
20.30
4R
19.31
4R
23.76
4R
20.79
36
20.30
5R
16R
4R
38.61
40.59
32.18
4R
42.08
36
42.57
4R
4R
5R
4R
82.17
85.14
80.19
starrett.com
898 Inspection Kits
3753A Electronic Depth
Gages without Output
• Allows very precise
measurement for car and truck repair
• Zero at any position
• Easy-to-read .32" high
LCD characters
• Linear Accuracy:
±.001" (± 0.03mm)
• Hardened, stainless
steel bar
• Used for tasks such as setting
proper distance or alignment
• Resolution:
.0005" (0.01mm)
• Slide lock
• Securing a measuring fixture to
a stable, reliable surface at various
odd angles in tightly confined spaces
• Inch/millimeter
conversion
• Enables options to secure a measuring
fixture to whatever surface is available
• Fine adjustment thumb roll
• Highly flexible configuration
Cat No.
3753A-6/150
3753A-12/300
3648-180
3648-260
3648-320
EDP
12258
12260
12261
12262
12263
Description
0-6” (0-150mm) Range
0-12” (0-300mm) Range
180mm Base Extension
260mm Base Extension
320mm Base Extension
Sale
$225.34
299.20
38.12
47.52
56.43
• Invaluable to auto mechanics
3752 Height Gages
• Large LCD display reads to .0005" or 0.01mm
• Clear bar graduations in .100" and 5mm
increments
• Instant inch-millimeter conversion
• "Hold" control feature retains a reading at any
position
• Large positive action keypad
Cat No.
3752-12/300
3752-24/600
EDP
68815
68816
Description
0-12" Electronic Height Gage
0-24" Electronic Height Gage
S898-1
S898-2
• Ability to retain and return to the true zero
reading of the height gage
Sale
$736.73
1,206.98
Cat No.
S898Z-1
S898Z-2
EDP
Description
12438 Inspection Kit, Plier, Flex Arm, Indicator
12437 Inspection Kit, Plier, Mag Base, Indicator
Sale
$262.85
306.90
668 Shaft Alignment Clamps
• Designed for fast, precise alignment of
motors, pumps, compressors, etc.
• Black anodized aluminum design
• Rigid 3/8" diameter stainless steel
indicator posts
• Extension plate for added radial clearance
• Heavy-duty roller chain accommodates
up to a 7-1/2" diameter shaft
Cat No.
S668CZ
S668DZ
EDP
67152
67153
Description
2 each: Chain Clamp, 196B5 Indicator, PT18724 Snug, Extension Plate, Posts (5", 7-7/16", 9"), with Fitted Case
2 each: Chain Clamp, 81-141J Indicator, 657Y Indicator Attachment, PT18724 Snug, Extension Plate, Posts (5", 7-7/16", 9"), with Fitted Case
Specifications subject to change
Promo 10.3
Sale
$728.64
75.07
9
B565 Brass Drive Pin Punches
117 Center Punches with Round Shanks
• Solid brass punches, ideal for
applications where a steel punch will
damage the work.
• Made of specially selected, hardened
and tempered steel.
• Knurled finger grip.
• 4" long
• The points are ground at an angle
• Knurled finger grip.
Cat No.
B565A
B565B
B565C
B565D
B565E
B565F
B565G
B565H
EDP
12465
12466
12467
12468
12469
12470
12471
12472
SB565Z
12473
• Tips are accurately centered.
Description
4" (100mm), 1/16" (1.5mm) Dia.
4" (100mm), 3/32" (2.5mm) Dia.
4" (100mm), 1/8" (3mm) Dia.
4" (100mm), 5/32" (4mm) Dia.
4" (100mm), 3/16" (5mm) Dia.
4" (100mm), 7/32" (5.5mm) Dia.
4" (100mm), 1/4" (6mm) Dia.
4" (100mm), 5/16" (8mm) Dia.
Set of 8 B565A/B/C/D/E/F/G/H
in Protective Fabric Pouch
Sale
$4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.75
Cat No.
117AA
117A
117B
117C
117D
117E
EDP
50482
50483
50484
50485
50486
50487
41.09
S117PC
50488
Description
3" (75mm), 1/16" (1.5mm) Dia.
4" (100mm), 3/32" (2.5mm) Dia.
4" (100mm), 3/32" (2.5mm) Dia.
4" (100mm), 1/8" (3mm) Dia.
4" (100mm), 5/32" (4mm) Dia.
5" (125mm), 1/4" (6mm) Dia.
Set of 5 117AA/A/B/C/D
in Plastic Pouch
818 Automatic Center Punch
18 Automatic Center Punch
• No hammer required! Just hold the
punch in an upright position, press
the handle down, and a built-in
mechanism
• Rugged automatic punches with allsteel handles and parts
• Adjustable knurled cap regulates the
force impact
• Hardened tool steel point may easily
be removed for resharpening or
replacement.
EDP
53048
Description
5" (125mm), 5/8" (16mm) Dia.
• Spring tension is constant so marks
made by the point are uniform in
depth and size
Sale
$28.71
819 Hinge-Locating Automatic
Center Punch
819
10
53049
Description
5" (125mm), 9/16" (14mm) Dia.
Sale
$32.67
• Large, square head provides a large
striking surface
• Beveled end prevents breakage
• Cupped punch surface
• Point is easily removed for
replacement or resharpening
Description
Hinge-Locating Automatic Center
Punch with Adjustable Stroke
EDP
50120
• Round, knurled grip
• Eliminates the risk of drilling off
center
EDP
Cat No.
18A
800 Square-Head Nail Sets
• Place the beveled edge into the
countersunk hole in the hinge and
press down on the handle
Cat No.
30.20
• Internal mechanism strikes when
downward pressure is applied
• The force can be adjusted by turning
the knurled cap
Cat No.
818
Sale
$4.95
4.95
4.95
4.95
4.95
6.24
• Made of hardened
and tempered steel
Sale
Cat No.
EDP
$31.05
S800PC
64131
Specifications subject to change
Promo 10.3
Description
SET of 5: One each of 800A/B/C/D/E
in Protective Plastic Case
Sale
$47.52
starrett.com
505 Prosite® Protractors
Measuring Tapes
• Takes error-prone calculations out of miter cuts
Starrett Tough Tapes™
• Upside down or backwards, the reading is always
correct
• High visibility rugged cases
• Scale shows angle for a miter joint and
single cut
• Smooth blade lock firmly holds blade
• Ergonomic over-molded soft grip
• High quality, value priced tape measure
• Saves time and reduces waste
Tough Tape
ProSite® Tapes
• Ideal for all building trades
• High visibility, impact resistant case
• Ergonomic non-slip over-molded grip
• Robust cam-operated lock
ProSite
• Heavy-duty, nylon coated blade
• Tough Tip® Stainless Steel Blade Protector
and shock absorbing blade bumper
Tru-Lok® Tapes
• Industrial quality with heavy-duty blades
• Tough Tip® Blade Protector
Tru-Lok
• Rugged, impact resistant case
Cat No.
CP505A-12
505A-12
505A-7
505P-7
EDP
12256
67752
11677
12255
Description
12" Combination Protractor
12" Miter Protractor
7" Miter Protractor
7" Plastic Miter Protractor
Cat No.
MY1-25
MY1-25F
MY109-25
MY1-33
MY1-8ME
XY1-25
XY1-30
C1-25
CH1-8ME12
Sale
$95.04
57.42
47.52
24.95
EDP
68934
12182
11625
68935
12150
67670
67672
65366
65934
Description
Tough Tape 1" x 25', S1 Grads
Tough Tape 1" x 25', Fract. Grads
Tough Tape 1.09" x 25', S1 Grads
Tough Tape 1" x 33', S1 Grads
Tough Tape 1" x 8m/26', S9 Grads
ProSite 1" x 25', S1 Grads
ProSite 1" x 30', S1 Grads
Tru-Lok 1" x 25' Chrome S1 Grads
Tru-Lok 1" x 8m/26' Charcoal S12 Grads
380 Steel Straight Edges &
414 Steel General Utility Rules
85 & 92 Series' Dividers
• 380 Series Steel Straight Edges
• Complete with Divider/Inside/Outside Legs
• Precision ground and nicely finished
to Starrett standards
• Rigid, light weight and easy handling
Sale
$6.59
6.59
10.99
10.99
7.69
14.29
17.59
10.99
14.29
• 85 Series Extension Dividers w/ Caliper Legs
• Forged steel legs are well-shaped, properly
tempered and polished
• Retain shape and accuracy
• Not Beveled
• Not Graduated
• The adjustable points may be removed and a pencil
inserted
• 414 Series Steel General Purpose
Utility Rules
• Hardened points are bent slightly so they can be
rotated and brought closer together
• Tempered steel
• 92 Series Carpenters' Dividers
• 8ths/16ths Grad, Both Sides
• Rigid, light weight and easy handling
• Thicker grads and numbers
for readability
• Forged steel legs are well-shaped,
properly tempered and polished
• 1/4" hang hole in one end
• The adjustable point may be
removed and a pencil inserted
85D
380
414
92-9
92-6
Cat No.
380-24
380-36
414-1
414-2
EDP
51440
51441
51499
51500
Description
24" (600mm) Seel Saight Edge
36" (900mm) Seel Saight Edge
12" General Utility Steel Rule
24" General Utility Steel Rule
Sale
$69.30
156.42
28.71
45.05
Cat No.
85D
85F
92-6
92-9
EDP
50401
50403
50423
50426
Specifications subject to change
Description
85 Series 9" Extension Divider w/Legs
85 Series 12" Extension Divider w/Legs
92 Series 9" (225mm) Carpenters Divider
92 Series 12" (300mm) Carpenters Divider
Promo 10.3
Sale
$208.89
220.77
103.95
110.88
C1
ProSite® Professional Box Beam Levels
Master Pro® Heavy Duty Die-Cast
Aluminum Level
• Rails are made of high strength, high profile heat-treated aluminum
• 24 & 36" levels have 3 vials (2 plumb & 1 level), 48" level has 4 vials
(2 plumb & 2 level)
• Six-function mechanics’ level will level, plumb, check 45º, check
pitch, set pitch,and measure length
• Glare resistant with luminous base for easy reading
• Extremely stable, cast construction with working edges ground for
accuracy and locking pitch/grade-screw adjustment
• Solid block acrylic vials are shock-proof, leak-proof and fog-proof,
adjustable to set grades accurately and re-calibrate and replacable
• Permanently marked rule on top reads
• Over-molded end caps
• Graduated top-sight level vial indicates pitch (1/8"/foot)
• Accuracy 025°, 1/64" over 3' ( 4mm over 1m)
• Four tough, yellow Pyrex® Vials (2 Plumb, 1 Level, and 45º) with
large bubbles and ceramic-fired lines
Cat No.
BXY-24
BXY-36
BXY-48
EDP
36334
36335
36336
Description
24"
36"
48"
Sale
$60.49
74.53
82.49
Sale
$52.60
135B
• Powerful rare earth magnet
• 6 (4 Plumb, 2 Level) tough yellow vials
• V-grooved top working surface
• Shock-absorbing end caps
• 3 Vials (1 Plumb, 1 Level, 1 45º), side
and top Reading
ST Sta-Tru™ Series Economy Aluminum Levels
• Medium-duty aluminum I-beam cross section with
flanged edges
135 Series Pocket Level
• Convex ends and satin nickel-plated finish
• 2 (1 Plumb, 1 Level) permanently mounted vials
Description
24" MPH Hardwood Economy Levels
36" MPH Hardwood Economy Levels
48" MPH Hardwood Economy Levels
18" Sta-True Economy Aluminum Levels
24" Sta-True Economy Aluminum Levels
Description
24"
AM-9 Aluminum Torpedo Level
• Cast aluminum frame with lapped
working surfaces
MPH Series Master Pro® Hardwood Economy Levels
• Select hardwood construction, reinforced with
aluminum
EDP
68192
68193
68194
36042
36043
EDP
36032
Torpedo & Pocket Levels
Economy Levels
Cat No.
MPH-24
MPH-36
MPH-48
ST2-18
ST2-24
Cat No.
ML-24
Sale
$49.49
57.05
71.49
10.19
11.85
Break-Away Blade Utility Knives
& Replacement Blades
• 3-1/2" / 88mm long – fits in pocket with no
sharp edges
Cat No.
AM-9
135B
EDP
36071
50571
Description
Aluminum Torpedo Level
3 1/2" (88mm) Pocket Level
AM-9
Sale
$9.35
23.76
Measure Stix™ Steel Measuring Tapes
• S1 Grads
• Utility knife with snap-off blade
• Measuring Tapes with adhesive backing
• Large and small sizes available
• Sticks to almost any work surface
• Regular and hook-style blades
• High quality precision steel rule is flat
with permanent adhesive back
• Cut to size with scissors
Cat No.
S012
S04R
SB-100D
KS01R
KSH01R
KS05R
KS06R
C2
EDP
68830
61783
63326
61776
61778
61784
61786
Description
Large Yellow Break-Away Blade Utility Knife
Small Red Break-Away Blade Utility Knife
100 Replacement Blades with Dispenser
10 Replacement Blades with Dispenser
10 Replacement Hook Blades with Dispenser
10 Small Break-Away Blades with Dispenser
10 Large Break-Away Blades with Dispenser
Sale
$1.99
1.39
19.79
3.76
9.03
3.76
4.88
Specifications subject to change
• Mount on work-benches saw tables,
drafting tables, etc
Cat No.
SM412W
SM412WRL
SM44W
SM46WRL
Promo 10.3
EDP
63170
64919
63168
66634
Description
12' x 1/2", Left-to-Right Reading
12' x 1/2", Right-to-Left Reading
4' x 1/2", Left-to-Right Reading
6' x 1/2", Right-to-Left Reading
Sale
$8.79
7.69
6.59
5.49
starrett.com
47 Universal Bevel Protractor
M1® All Purpose Lubricant
• Protects as it dries, avoiding dirt and grime
• Offset and straight slots in the
blade – in combination with straight
slots in the stock that allow for a
wide variety of adjustment and angle
settings that are impossible to obtain
with many ordinary bevels
• Penetrates quickly to free frozen nuts and bolts
• Prevents rust and corrosion damage
• Non-soluble in water, displacing moisture to
lift it away from protected surface
• 6" blade length
• Nonconductive
• Recessed clamping bolt
• Lubricates without silicone
• 12-pack of 12oz cans
Cat No.
47
EDP
50266
Description
Universal Bevel
Sale
$88.11
Cat No.
EDP
M1.95173 95173
439 Builder's Combination Tool
Description
Case of 12/12oz Aerosol Cans
Sale
$81.18
13 Double Square with Hardened Blades
• Combines seven tool functions in one: rule,
square, level, plumb, protractor, bevel and
pitch-to-foot indicator
• Sliding blades are adjustable
• Stock is 9" (230mm) long with a protractor that
shows direct and supplementary angles and
four levels
• 4R Grads (8ths, 16ths, Quick reading 32nds &
64ths) on blade
• 18" blade is hardened, photo-engraved 1-1/2"
(38mm) wide • Practical for a wide variety of uses
• Faces of the head are ground square
• Ideal for laying out or cutting valleys or hips of
different pitches and many other jobs
Cat No.
439-18
EDP
52110
Description
18"
Sale
$374.22
Cat No.
13A
EDP
50109
Description
4" with Graduated Blade only
Sale
$53.46
RS-24 Professional Framing Square
Stair Gage Fixture Attachments
• FS-24 Professional Framing Square
• 111 (long) & 470 (short) Stair Gage Fixture Attachments
clamp to a framing or rafter square for laying out stair
stringers, hip, valley, etc.
• One-piece tempered steel, 24" x 2" body with 16" x 1-1/2"
tongue
• Sold in left and right repairs
• Face and back permanently stamped with 1/8" graduations
• Tough, rust resistant nickel plated cast iron
• Clear coating for rust resistance Convenient hang hole
• Ends are machined square
• Furnished in pairs
111
470
Cat No. EDP
RS-24
36128
Description
24" Framing Square
Sale
$16.60
Cat No.
111
470
EDP
Description
50476 For Rafter and Framing Squares (Pair) - long
52482 For Rafter and Framing Squares (Pair) - short
Specifications subject to change
Promo 10.3
Sale
$31.68
30.69
C3
bi-metal unique® HSS Safe-Flex®
Hacksaw Blades
Hand Hacksaw Frames
K140
• With Starrett-exclusive bi-metal unique® providing 170% more
high-speed steel weld contact area
K145
K153
• K140: Closed Grip Non-adjustable light duty frame
• bi-metal unique reduces blade fracture and breakage for faster
cust and longer life
• K145: Professional quality closed grip high-tension heavy duty
with easy to use adjustment lever and sure ergonomic grip
• Precision ground tooth profile
• K153: Closed grip high-tension heavy duty constructed of
cast aluminum with an extra-thick tubular steel bar for added
strength, 4-3/8" throat depth and storage for spare blades
Cat No.
KBS1024-2
KBS1218-2
KBS1224-2
KBS1232-2
KBS1218-10
KBS1224-10
KBS1232-10
BS1218
BS1224
BS1232
• All frames include a Starrett bi-metal unique® Blade
Cat No.
EDP
K140
12184
K145
67818
K153
64147
Description
Closed Grip Non-Adjustable Light
Duty Hand Hacksaw Frame
Closed Grip High-Tension Heavy-Duty
Hand Hacksaw Frame
Closed Grip High-Tension Heavy-Duty
Hand Hacksaw Frame
Sale
$8.79
21.99
21.95
EDP
40334
40336
40337
40338
40342
40343
40344
40330
40331
40332
Description
10" x 1/2" x 025", 2/Card
12" x 1/2" x 025", 2/Card
12" x 1/2" x 025", 2/Card
12" x 1/2" x 025", 2/Card
12" x 1/2" x 025", 10/Pack
12" x 1/2" x 025", 10/Pack
12" x 1/2" x 025", 10/Pack
12" x 1/2" x 025", 10 Sgl. blades
12" x 1/2" x 025", 10 Sgl. blades
12" x 1/2" x 025", 10 Sgl. blades
Dual Cut® Jig Saw Blades
King Cut® Fire, Rescue & Demolition
Reciprocating Blade
• Special designed teeth that cut in both directions
• Tough design for fire, rescue and demolition applications
• Virtually eliminates burrs from both sides of the cut
• Effectively cut through a wide variety of materials
• With Unified Shank® – fits all machines
• Bright fluorescent yellow paint and high-contrast marking
system makes King Cut® blades stand out
• With bi-metal unique® saw technology, for faster
cuts and longer blade life
• Starrett-exclusive bi-metal unique® construction for
exceptional strength and extended blade life and fast cuts
• BU3DC for straight and wide arc cuts
• BU2DCS-2 for tighter curve scroll cuts
BU3DC
Cat No.
BTR8610-2
BR81014-2
BR81014-5
BR121014-20
EDP
11465
11459
11460
11479
Blade
Tapered
Straight
Straight
Straight
Size
8" x 1" x .063"
8" x 3/4" x .063"
8" x 3/4" x .063"
12" x 1" x .063"
Pack
2/Pack
2/Pack
5/Pack
20/Pack
Sale
$2.74
3.09
3.09
3.09
14.29
14.29
14.29
1.31
1.31
1.31
Sale
$9.89
7.69
17.59
76.99
Cat No.
EDP
BU3DC-2 12484
BU2DCS-2 12480
Hole Saw Kits
BU3DCS
Description
3" - 2/Pack
2" Scroll-Cutting - 2/Pack
Sale
6.59
6.04
• KV290: Electricians’ & Plumbers’ Kit: 9 saws, 3/4" to 2-1/2" range, A1, A2, A5
& A7 arbors, case
• KV291: Industrial Kit: 11 saws, 3/4" to 3" range, A1, A2, A5 & A7 arbors, case
• KV292: Lockset Kit: 6 saws, 7/8" to 2-1/8" range, A1, A10 & A12 arbors, case
• KV1092: Utility Kit: 6 saws, 3/4" to 2-1/2" range, A1, A2 & A12 arbors, case
• KV1094: Electrical Kit: 6 saws, 7/8" to 2-1/2" range, A1, A2 & A12 arbors, case
KV290
KV291
KV292
KV1092
KV1094
KV1095
• KV1095: Deluxe Electricians’ Kit: 10 saws, 7/8" to 4-3/4" range, A1, A2 & A4
arbors, case
Cat No.
KV290
KV291
KV292
KV1092
KV1094
KV1095
C4
Specifications subject to change
EDP
56011
56012
56811
63619
63620
63621
Promo 10.3
Description
Electricians' & Plumbers Hole Saw Kit
Industrial Hole Saw Kit
Lockset Hole Saw Kit
Utility Hole Saw Kit
Electrical Hole Saw Kit
Deluxe Electricians' Hole Saw Kit
Sale
$115.30
129.89
81.18
81.18
89.23
154.18
starrett.com
Drill Gages
Depth and Angle Gages
• Ground and polished hardened steel
head
• Accurate, machine divided, tempered
steel rule.
• Gages can be smoothly adjusted to
the required measurement and then
locked into position by a knurled nut
• 237 Head is made of hardened steel,
ground, and nicely polished – 2-5/8"
(66mm) long and 1/8" (3mm) wide
• Quick, convenient checking of
drill sizes
• Approximately 5/64" thick by
2-5/16" wide by 6-1/4" long
• Rigidly tested after hardening
185 Time Saver® Tap & Drill
Gage
• 60 holes with number sizes and
decimal equivalents
• Tap drill sizing in "NF" National
Fine or "NC" National Coarse
Thread Series
• Correct amount of stock for
65% full thread
• Shows correct drill body size
• Black matte finish
• Steel stamped on one side and
white marked on reverse for
quick, clear reading
Cat No.
185
187
198
EDP
50675
50677
50718
187 Jobbers' Drill Gage
• Quick sizing of 1/16-1/2" twist
drills by 64ths
Cat No.
236
237
EDP
51074
51080
Description
0-6" Depth and Angle Gage
0-6" Depth Gage
• 29 holes marked with inches
and decimal equivalent drill
sizes
• Black matte finish with gage
information steel stamped on
one side and white marked on
reverse for quick, clear reading
827 Edge Finders
198 Standard Letter Size Drill
Gage
• 827A has a single end contact with a .200"
diameter
• Quick, convenient checking of
letter size drills
• 827B has .200" and pointed contacts
• 26 holes for "A" through
"Z" drill sizes and decimal
equivalents .234" through .413"
• Satin finish
Description
Time Saver® Tap & Drill Gage
Jobbers' Drill Gage
Standard Letter Size Drill Gage
• Finds work surfaces quickly and accurately
• Work with flat, straight edges, shoulders,
grooves, round work, studs, dowels or
center points and scribed lines
• Body and contacts are made of tool steel,
hardened, ground and lapped to close
tolerances for diameter and concentricity.
Sale
$55.44
51.48
46.53
Cat No. EDP
Description
827A
53062 Edge Finder
827B
53063 Edge Finder
Sale
$20.79
24.26
91 Tap Wrenches
551 Precision Screwdriver Set
• Strong and well proportioned.
• Precision-machined tips
• Nicely finished with tempered gripping surfaces
• Vapor-chromed non-slip tips
• Firmly hold square or round shanks.
• Hardened for maximum durability
• Plunger operated by knurled sleeve – the spring inside the sleeve causes
plunger to back off when pressure is removed
• Tapered handles allow rapid rotation
Cat No.
91A
91B
91C
91D
EDP
50419
50420
50421
50422
Sale
$55.44
42.57
Tap SIze Range
1/16 - 1/4"
3/16-1/2"
1/4-5/8"
5/16-3/4"
• Spin-free finger control cap for
precise turning and control
Sale
$38.61
56.43
91.08
121.77
Cat No.
S551Z-7
EDP
67203
Specifications subject to change
Description
Set of 7 Screwdrivers with Case
Promo 10.3
Sale
$47.03
11
22C Drill Point Gage
C391 Center Gage
• Quick, accurate determination of correct drill
point angle of 59°
• American Unified National
Standard, 60°
• Adjustable sliding head with locking thumb nut
• Inch graduations
• Beveled head is graduated in 32nds for
measuring drill lips
• Spring-tempered steel
with satinchrome finish
• Hook rule with machine-divided graduations in
8ths, 16ths, quick-reading 32nds and 64ths
• Ground gaging surfaces
• Adjustable hook can be shortened or extended
on either side of the rule or removed if desired
• Also serves as a plain rule, hook rule, depth
gage and slide caliper
Cat No. EDP
Description
22C
50150 Drill Point Gage
Sale
$48.51
Cat No. EDP
Description
C391
51475 Center Gage
Thickness Gages
Screw Pitch Gages
• Leaves are constructed of the finest tempered
steel, carefully finished to correct thickness,
individually tested and marked with thickness
• Substantial steel case with
folding leaves
• Locking device securely
locks leaves in position
• Secure locking device
• Leaves feature a narrow
design for checking internal
and external threads
• Easy removal or replacement of leaves
• Rugged protective case
Cat No. EDP
66
66T
66MA
Description
26 straight leaves, 1/2" x 3-1/32"
leaves, Range: .0015-.025"
26 tapered leaves, 1/2-1/4" x 3-1/32",
50315
Range: .0015-.025"
20 straight leaves, 12.7mm x 77mm
55974
leaves, Range: .05-1.0mm
50314
Sale
$19.35
Sale
$48.51
54.45
48.51
Cat No.
6
472
474
156M
159M
EDP
50035
52484
52486
50589
50591
Leaves
30
51
28
28
28
TPI Range
4-42
4-84
4-80
0.25-2.5mm
0.5-11.5mm
Description
With 11-1/2 & 27
pipe thread pitches
With 60° center gage
Radius Gages
Telescoping Gage Sets
178 Fillet or Radius Gages with locking device
• Rigidly attached, automatically
self-centering handle
• Lay out and check tools, dies, patterns, etc.
• Constant spring tension
provides uniform contact
pressure
• Leaves for both concave and convex radii
• Nicely finished, high quality steel
• Five gaging surfaces for convex or concave radii
• 229 features one rigid contact
arm and one spring-tensioned
telescoping contact arm
• Satin finished stainless steel with clear radius
markings
• 579 has a greater range and
two telescoping contacts
167 Radius Gage Set
Cat No.
EDP
178A
50664
178B
50666
S167CHZ 50619
12
Description
Radius or Fillet Gage with locking device,
30 leaves, Range: 1/32 - 1/4", 64ths
Radius or Fillet Gage with locking device,
32 leaves, Range: 17/64 - 1/2", 64ths
Radius Gage Set with 4" long holder, 25
gages, Range: 1/64 - 17/64", 64ths
Sale
$32.67
62.37
33.17
34.65
43.56
Sale
$58.41
64.35
Cat No. EDP
Range
Length
S229GZ 50929 Telescoping Gage Set, 229A/B/C/D/E, 5Pc
S579GZ 52616 Telescoping Gage Set, 579A/B/C/D, 4Pc
Sale
$176.22
119.79
140.58
Specifications subject to change
Promo 10.3
starrett.com
270 Taper Gages
269A Taper Gages
• These gages are for determining hole sizes in
dies and all kinds of other work
• Fast and accurate hole sizing
• Graduated in thousandths of an inch
• Tempered steel construction with
locking device
• 010- 150" / 0.3-4mm
• One side graduated from .010" to .150" in
thousandths of an inch;
• Range of .100-.500" read
in thousandths
• Reverse from 0.3mm to 4mm in 0.05mm
• 2-1/2" length
• Constructed of quality tool steel and accurately
tapered throughout entire length
• 8 Leaves
• 7/16" (11mm) wide by 6-1/4" (160mm) long
• Can be used as a precision shim
Cat No. EDP
Description
270
51292 Range: .010-.150", 7/16" wide, 6-1/4" long
Sale
$93.06
Cat No. EDP
Description
269A
51290 Range: .100-.500", Length: 2-1/2", 8 leaves
829 Small Hole Gages
Thickness Gage/"Feeler Stock"
• Well balanced full-ball gages
• 12" long by 1/2" wide
• Ideal for measuring small holes,
slots, grooves and recesses
• .001" through .030" thick
Sale
$112.86
• Made of the finest tempered steel
• Hardened measuring surface
with two-point contact
• Rounded edges for ease of use
• Marked every 6" with thickness
• Smooth, sensitive adjustment
for improved accuracy
• Convenient 3/16" hole for hanging
• Safety stop prevents breakage
Cat No.
829A
829B
829C
829D
S829EZ
EDP
53070
53071
53072
53073
53074
Range
.125-.200" (3.2-5.1mm)
.200-.300" (5.1-7.6mm)
.300-.400" (7.6-10.2mm)
.400-.500" (10.2-12.7mm)
Set of all 4 in Case
Length
2-7/8" (75mm)
3" (80mm)
3-3/8" (85mm)
3-1/2" (90mm)
Sale
$27.72
28.22
28.22
29.21
119.79
190 Little Giant Jack Screw Set
Cat No.
S667A
EDP
63274
Description
One each, 32 sizes
Sale
$63.00
200W Wooden Tool Chest
• Light and strong solid poplar
with finger lock joint construction
• Very handy for leveling
work on planer beds,
upright drills, setting
up machinery, and
for general use in the
toolroom or machine
shop.
• 9" W x 14-1/2" D x 12-1/2" H
• Two key lockable drawers with
commercial grade slides
• Generous top storage area
with close and latch lid
• Green felt lining in top section and drawer bottoms
• Brass trim and support
Cat No. EDP
Description
S190
50680 Little Giant Jack Screw Set
Sale
$48.51
Cat No.
200W
EDP
55208
Specifications subject to change
Description
Wooden Tool Chest
Sale
$585.09
Promo 10.3
13
3811 Portable Hardness Tester
KineScope
• High accuracy, simple to operate, battery operated with a wide measuring range
• A digital video camera, with precision optics and LED
lighting that fits in the palm of your hand
• Compact size: 2-1/2" W x 1-1/8" D x 6-1/2"
L (64 x 29 x 165mm)
• 40-140X magnification to zoom in on the fine details
• Built-in D impact probe with internal tungsten
carbide test tip
• Capture images or video and easily add labels, make
measurements, and draw on the live image.
• Back lighting, with LCD readout
• Connects to your computer’s USB port
• Measuring Accuracy ±0 8% (corresponding
to ±1 HRC @ HRC=58)
• Includes VLink imaging software.
• Back lighting, with LCD readout
• Resolution: 4 microns
• Archives data with extended memory to 500 groups
• Pixel Resolution: 640 x 480
• Includes case with calibrated test block
• Field of View at
40X = 7.5 x 10mm,
140X = 1.8 x 2.5mm
Cat No.
3811
EDP
67184
Description
Portable Hardness Tester
• Image Sensor: ¼" CMOS
Sale
$2,203.52
3805A Electronic Durometer
• Ergonomically designed, lightweight and accurate
• Measures hardness in Shore A values • Includes RBR-63 rubber test block (Shore A 61-63)
• Contact is made with a 35º blunt point for accuracy
• Large, easy-to-read LCD display and Auto-Off
• Ability to allow averaging and to lock in peak value
• Repetitive deviation of 20-90 HA< ±1 grade
• Resolution of .1HA
• Measuring range of 0-100HA
Cat No.
KineScope
• Conforms to ASTM D-2240, ISO 7619 standards
Cat No.
3805A
EDP
12265
Description
Electronic Durometer
EDP
Description
Digital Video Camera
Sale
$914.38
Sale
$615.12
3814 Analog Bench
Hardness Tester
3800 Portable Surface Roughness Tester
• Measures surface texture conforming to traceable standards
• Convenient, pocket-sized and easy to use
• Reliable bench hardness tester provides
Rockwell Hardness values on all types of
materials
• LCD display
• Ability to handle Rockwell Scales A through H
and K
• Measures Ra or Rz
• High quality casting and ergonomic design
• Battery powered or line cord
• Conforms to ASTM E-18 standard
• Adjustable cutoff values
• Includes a diamond indentor, a 1/16" (1 6mm)
ball indentor, three certified test blocks, four test
tables, spot anvil and a standard vee anvil
• Diamond tracer tip
• Includes case, charger, and
roughness standard
Cat No.
3800
14
EDP
67182
Description
Portable Surface Roughness Tester
• Economically priced
Sale
$1,452.88
Specifications subject to change
Cat No.
3814
Promo 10.3
EDP
67754
Description
Bench Hardness Tester
Sale
2,496.51
starrett.com
660 Magnetic Base Indicator Holder
661 Mini Magnetic Indicator Holder
• Triple jointed arm -- three adjustable pivots controlled by a
single knob for fast, easy indicator positioning -- full 360º
horizontal and over 180º vertical
• Simple, versatile, effective and economical tool for a variety
of indicator holding tasks It
• Small but powerful magnetic base with 70 lb (320N)
holding force
• No levers or switches – simply place the
holder on the measuring surface, attach
the indicator and position as required
• Positive On/Off switch and sensitive fine-adjustment
thumb screw
• 30 lb (133 N) of holding force
• Holds indicators with 3/8" stems or standard dovetail mounts
• Base Dimensions: 1-3/16" x -9/16" x 1-3/8" (30mm x 40mm x 35mm)
• Fits over spindles and posts with diameter
of ¼" (6 3mm)
• Will hold any indicator with
a 3/8" (9 5mm) stem or
standard dovetail mount
• Includes an 8mm adapter for indicators
with (8mm) metric stems
• Base Diameter: 1.180" (30mm), Base Height: 1" (25 4mm), Overall Height 4.173" (106mm)
Cat No.
660
EDP
68621
Description
Magnetic Base
Sale
$101.92
Cat No.
661
Precision
EDP
68620
Description
Mini Magnetic Indicator Holder
Sale
$48.62
Solutions
Measurements matter.
Be sure. Choose Starrett.
Specifications subject to change
Special Application.
Custom Solution.
Promo 10.3
15
Hacksaw Blades & Frames
See Page C4
Master Pro Hardwood Levels
See Page C2
3753 Depth Gages
See Page 9
818 Center Punch
See Page 10
Promotion 10.3
Prices in Canadian Dollars
Sale Valid September 1 - December 31, 2010
Specifications subject to change
Promotion 10.3Can 10M/S
09/10
© The L.S. Starrett Company