Anhydrous Ammonia Unloading Station and Storage/Vaporizer

Transcription

Anhydrous Ammonia Unloading Station and Storage/Vaporizer
ANAM-100.0
www.IFSolutions.com
Anhydrous Ammonia
Unloading Station &
Storage/Vaporizer System
Integrated Flow Solutions Anhydrous Ammonia
Unloading Stations & Storage/Forwarding Systems
are designed to unload Anhydrous Ammonia from
transports into a modular Storage/Vaporizer System
which includes a storage tank, vaporizer,
instrumentation and controls. The complete system is
designed to minimize field assembly. The vaporizing
system is designed to transfer the Anhydrous Ammonia
to the Ammonia Flow Control Unit (AFCU).
Industries
POWER
Standard Features
GENERAL
EMISSIONS
Benefits
Single Source Accountability
Pre-Packaged Modular Design Costs Less
Than Component Based Site-Built Systems
Reducing Overall Project Cost
Minimizes Field Erection Time Shorter Overall Project Delivery Schedule
Complete System Function Testing
Prior To Shipment
24/7 Customer Service
Industry Standards
Vessels Code Stamped ASME Section VIII &
National Board Registered
Piping Designed to ANSI B31.1/ANSI B31.3
Pipe Fabrication to ASME Section IX
Structural Steel Assembly Designed to AWS D1.1
Complete System Designed to API RP 550 & K61.1
INTEGRASAFETM Unloading Station
Local Indication of:
Tank Level
Tank Pressure
Flow Indication
Local Manual/Automated Valve Operation
Storage/Forwarding System
Vessel Storage Up to 30,000 Gallons
Single & Double Wall Carbon Steel Vessels
INTEGRAHEATTM Electrical Vaporizer ASME
Code Stamped (Locally Mounted)
Full Thyrister (SCR) Control Panel with
Redundant Safety Shutdown System (Locally
Mounted) per NEC & NFPA
Complete Factory Function Test
Optional Features
UL or CSA Listed Heater and Control Panel
Assembly per NEC & NFPA
Class 1, Div. 2 Hazardous Locations
Compliance with Plant/Engineering Specifications
Additional Services
“Aspen Plus” Process Simulation Software Used
To Guarantee Process Conditions
Installation/Training/Start-Up Supervision
Extended Warranty
Nationwide Service Network
INTEGRATED FLOW SOLUTIONS 9807 Whithorn Drive Houston, TX 77095
281-855-8125 / Toll-Free USA 800-795-4068
www.IFSolutions.com
Anhydrous Ammonia Unloading
Station & Storage Vaporizer System
SKID LIMITS
I
ATMOS.
ATMOS.
2"
1" 1"x1/2"
ATMOS.
1"
ATMOS.
2"x1"
ANHYDROUS AMMONIA TANK
ELECTRIC HEATER
VAPORIZER ASSY.
24" MANWAY
ATMOS.
1"
DRAIN
2"x1"
ELECTRIC HEATER
VAPORIZER ASSY.
ATMOS.
2"
1 1/2"
OUTLET TO PROCESS
ANHYDROUS AMMONIA INLET
S
SCR PANEL
AT
AMMONIA
TRANS.
I
NOTE:
ALL NOZZLES SHALL BE ORIENTED
PERPENDICULAR TO WORLD COORDINATES.
2"
2"x1 1/2"
2"
2"x1 1/2"
2"
FC
2"x3"
VENT LOADING SKID
ATMOS.
2"
2"x1"
NC
2"
2"
ATMOS.
SKID LIMITS
1/2" INSTRUMENT AIR
BY CUSTOMER
"X" OVERALL SKID LENGTH
"Y" OVERALL SKID WIDTH
VAPORIZER-02
VAPORIZER-01
VIEW
C
L VESSEL
0
50 60
80 90 100
10 20 30
40
70
0
50 60
80 90 100
10 20 30
40
70
1
00
05 0 4
02 01 0
09 08 0
7
06
03
"Z" APPROX. OVERALL HEIGHT
PLAN
"X" OVERALL SKID LENGTH
ELEVATION
VIEW
VAPORIZER-01 (NEAR SIDE)
VAPORIZER-02 (FAR SIDE)
WORKING VOLUME GALLONS
LENGTH - X
WIDTH - Y
HEIGHT - Z
WEIGHT - LBS.
6,000
20’
11’
14’
15,000
10,000
34’
11’
14’
25,000
14,000
50’
11’
14’
35,000
18,000
60’
11’
14’
45,000
22,000
75’
12’
16’
55,000
INTEGRATED FLOW SOLUTIONS 9807 Whithorn Drive Houston, TX 77095
2004 IFS
281-855-8125 / Toll-Free USA 800-795-4068
These materials contain proprietary information and may not be reproduced without prior written permission from Integrated Flow Solutions.
www.IFSolutions.com
LIT ANAM-100.0 1002