DM-T Pen Vaporizer

DM-T Pen
Vaporizer
Welcome to our user instruction guide for the DM-T Vaporizer Pen Kit. Here you will find useful
information on the components of the DM-T Vaporizer works, followed by the general DM-T Vaporizer
instructions. We have had a large number of questions about specifics regarding this device, and we
hope that this guide will answer most of those questions.
What is the DM-T Vaporizer?
The DM-T Vaporizer is a personal vaporizer pen that runs on a powerful, rechargeable battery, making
the device very portable. Although the DM-T
Vaporizer is primarily a dry herb vaporizer, it also has other uses. In addition to using herbs, you have the
ability to use wax in the heating chamber as well. The heating chamber is one of three main components
to the vaporizer. The other two components being the mouthpiece and the battery. Of course, there are
more parts to the vaporizer and here is a diagram to show you:
Mouthpiece: I doubt anyone needs an explanation here but just in case… you put your mouth here.
Ceramic Filter: The second filter that makes sure no loose particles get to the mouthpiece. It also
absorbs some heat.
Steel Filter: The first filter that makes sure no loose particles get to the mouthpiece.
Spring: Keeps your herbs packed in nice and tight.
Chamber Connector: Connects your mouthpiece to the heating chamber.
Ceramic Heating Chamber: This is where your herbs or wax goes. Inside are coils that heat up red-hot.
This part gets pretty hot after some use so be careful!
Battery: The part that powers the entire device. The battery is rechargeable and has a LCD screen that
has a battery power indicator.
Now that you are familiar with the vaporizer’s components, lets move on to the instructions.
How To Turn On the DM-T Vaporizer
This may be where you start to ask yourself why this topic needs its own section or why it’s even being
brought up at all. Well, let me tell you all about the least intuitive thing about this device. The power
button does not turn on or turn off the vaporizer when you press it…. at least not when you press it
once. You will keep pressing the power button only to be plagued by the LCD screen constantly torturing
you with its “Off” message. At least twice a day, I get an email with “Hey man! This vape won’t turn on”
or “The vape keeps telling me it’s off even though I press the power button”. Here is the answer to the
single most asked question about the DM-T Vaporizer:
To turn on or off the vape, you must press the power button several times (about 5 or 6)
consecutively without interruption. If done correctly, you will be rewarded with a bright
glowing light on the LCD screen with the word “On”.
I know what you are thinking here… “what kind of a dumb
system is that?”. Truthfully, I had the same thought at first, but
then I realized that it is actually a brilliant design. Had the
manufacturer allowed you to turn on/off the device by
holding the power button (as is common with most
electronics), you would not have the ability to heat up the
vaporizer as much as you wanted.
How to use the DM-T Vaporizer
Fortunately for everyone, using the vaporizer is actually easier than turning it on! For the
sake of keeping this simple, we will use dry herbs in our example to describe how this
vaporizer works. What you want to do first is connect the battery to the heating chamber
simply by screwing it on. Next, press and hold the power button. You should see the coils in
the heating chamber glow bright red like so:
DO NOT Burn Your Herbs!
Let’s get something straight. You bought a vaporizer for a
reason. You want to vaporize your herbs and not smoke them
(read: burn them). If you pack your herbs directly into the
heating chamber, they will obviously burn… I mean… look at
that picture! Those coils are incredibly hot! Every bad review
you have read about this vaporizer burning the herbs and not
vaporizing them is because that person placed the herbs
directly onto the hot coils. What did they expect?
How to pack your herbs into vaporizer, use the packing tool included in the kit to push the
mesh screen into the heating chamber as pictured below:
You want to find that sweet
spot that is far enough from
the coils so that the herbs
don’t burn, but is close
enough so that they get
some heat and vaporize. I
find that the sweet spot is
about 2/3 of the way down
the heating chamber. When
done correctly, it will look
like this:
Ok, now you are finally ready
to pack the herbs. First, finely
grind your herbs. The finer the
herbs are, the better vaping
experience you will have. It is
very important to make sure
you do not over-pack! Once
you have packed your herbs,
simply attach
the mouthpiece by screwing it
on with the spring pushing
down on the herbs. That’s it!
You are good to go!