sports lighting

Transcription

sports lighting

SPORTS
Solutions in
SPORTS LIGHTING
Sydney Cricket Ground, Sydney, New South Wales
2
SPORTS LIGHTING | www.sla.net.au | enquiries: [email protected]
Sports Under Light For When &
Where You Need It Most
Far away from the maddening cheers of thousands
of spectators, a club match in the outer 'burbs runs
over time. Progression towards the finals hinges
on strong goal defence but in the dying twilight
of a late summer's afternoon, the ball is quickly
becoming elusive to even the youngest eyes...
Achieving excellence in any field of sports requires
determination, dedication and a desire to succeed.
Constant investment must be made in researching
the latest techniques in achieving perfection and
discovering the best methodology to achieve
peak performance under whatever conditions
may prevail or the challenges placed before the
participant.
Sylvania Lighting Australasia has adopted this same
paradigm in its devotion toward its crafting of
quality sports lighting solutions.
Our work is on display in some of Australia’s
most iconic sporting venues where the need for
broadcast quality lighting is paramount to the
success of not only the participants and spectators
but also to uphold the commercial agreements that
underwrite so much professional sport.
But our dedication toward providing quality
solutions does not begin and end purely at large
scale, professional sporting arenas.
Local councils and sporting associations can benefit
from SLA’s expertise in helping design, engineer
and supply lighting solutions for whatever the size of
facility, club or sporting type whether it be the local
footy field, community park or tennis court.
By combining design expertise with our knowledge
of the right product mix and control systems which
deliver total command over system operation,
SLA can help customers achieve the right level of
illumination for their sporting facilities, surrounding
areas and amenities. In addition, the use of leading
lighting technologies helps customers deliver in
areas of environmental sustainability, achieve
lower cost of operation and reduce maintenance
requirements for the lighting solution employed.
...the Goal Defender reaches to block the shot.
Behind her, the court's lighting tower ignites
illuminating the elusive ball as it arcs gently toward
the net. She springs to action, local glory at her
finger tips...
www.sla.net.au | enquiries: [email protected] | SPORTS LIGHTING
3
Monster Skate Park, Homebush, New South Wales
4
SPORTS
Briteline Elite T10
4
Briteline Elite T8
6
Briteline Elite 1500
8
R2 Maxi
10
R3 Maxi
12
S2 Maxi
16
Nightstar Court Master
18
A3 Maxi
20
62&&(5
)LHOG6L]HP[P
[P&ROXPQV
0) [%/6:7
[%/3:7
0
(KDYH OX[
PLQDYH PLQPD[ Typical Sports Layouts
24
0
0
Remote Control Gear
0
30
5
BRITELINE™ ELITE T10 / SPORTSLINE T10 SERIES
HIGH PERFORMANCE FLOODLIGHT
FEATURES
Timed ignitor as standard
Compact and light weight construction allowing for minimisation
of pole/mounting costs
Over/under slung mounting capability
Remote Gear tray or Cast box options -Elite: 240V or 415V,
Sportsline: 415V only
KEY APPLICATIONS
Exterior Sports
Mines
Area
Facade
Heavy Industrial
Security
The Briteline™ T10 series are reliable and trusted high
"
$ % Australia to suit Australasian conditions. The Briteline™
Elite features Constant Wattage control gear allowing
for precise lamp control, minimised cabling and offering
premium protection against supply voltage variations.
The Briteline™ Sportsline offers Ignitor Reactor control gear
allowing for an economical solution for small to medium
"
LUMINAIRE CONSTRUCTION
High pressure die-cast DA401 aluminium body
Toughened 5mm glass
!
"
in either Specular (Narrow ) or Peened (Wide) beam
Stainless steel fasteners
OPTIONS AVAILABLE
Glare shield option
Upward waste light visor option
Wire guard option
Environ system options
Dimmable
SLA Control and Monitoring System compatible
Stainless steel trunion
#
Publication: V.1.0 07/2013
6
SPORTS
'Shark Park', Home ground of the Cronulla Sharks NRL Rubgy League Club, Cronulla, New South Wales
Description
Type
Lamp
Base
Weight (kg)
BLS65 Elite 2000W T10 CWA 240V
Metal Halide
M2000/T10/DE
K125-36
13.0*
Metal Halide
M2000/T10/DE
K125-36
13.0*
BLP65 Elite 2000W T10 CWA 240V
Metal Halide
M2000/T10/DE
K125-36
13.0*
Metal Halide
M2000/T10/DE
K125-36
13.0*
BLS65 S/Line 2000W T10 IR 415V
Metal Halide
M2000/T10/DE
K125-36
13.0*
BLP65 S/Line 2000W T10 IR 415V
Metal Halide
M2000/T10/DE
K125-36
13.0*
Note:
Remote Control Gear.
S-Series is specular finish (Narrow Beam). P-Series is peened finish (Wide Beam).
* Fixture mass shown only.
545
5H
1500
4H
1
1125
435
540
3H
2
5
2H
750
10
20
50
H
375
273
0
-90
-60
-30
0
H
30
BLS 65 2000W T10
cd/kLm
Horizontal
Vertical
60
90
3H 2H
H
0
BLS 65 2000W T10
MH = 18m Aim = 70deg
H
2H
H
18.0
20.0
25.0
3H
Multiplier
1.00
0.81
0.52
Sail Area: 0.24m2
Sail Area Calculated
in this Direction
For more information,
scan the QR code:
7
BRITELINE ELITE T8/SPORTSLINE T8 SERIES
FEATURES
Timed ignitor as standard
Remote Gear tray or Cast box options – Elite : 240V or 415V,
Sportsline : 415V only
KEY APPLICATIONS
Exterior Sports
Mines
Area
Facade
Heavy Industrial
Security
The Briteline™ T8 series are reliable and trusted high
"
$ in Australia to suit Australasian conditions. The Briteline™
Elite features Constant Wattage control gear allowing for
precise lamp control, minimised cabling and premium
protection against supply voltage variations.
The Briteline™22 Sportsline offers Ignitor Reactor control
gear allowing for an economical solution for small to
"
High pressure die- cast DA401 aluminium body
Toughened 5mm glass
!
"
in either Specular (Narrow) or Peened (Wide) beam
OPTIONS AVAILABLE
Glare shield options
Wire guard option
#
8
SPORTS
Kyabram Oval, Kyabram, Victoria
Description
Type
Lamp
Base
Weight (kg)
Metal Halide
M2000/T8/DE
Special
13.0*
Metal Halide
M2000/T8/DE
Special
13.0*
Metal Halide
M2000/T8/DE
Special
13.0*
Metal Halide
M2000/T8/DE
Special
13.0*
BLS65 S/Line 2000W T8 IR 415V
Metal Halide
M2000/T8/DE
Special
13.0*
BLP65 S/Line 2000W T8 IR 415V
Metal Halide
M2000/T8/DE
Special
13.0*
Note:
545
5H
1800
4H
1350
3H
435
540
2H
900
1 2
5
1020
50
H
450
0
-90 -60 -30
0
30
273
BLS 65 2000W T8
cd/kLm
Horizontal
60
90
H
3H
2H
H
0
BLS 65 2000W T8
Vertical
H
2H
H
18.0
20.0
25.0
3H
Multiplier
1.00
0.81
0.52
Sail Area: 0.24m2
in this Direction
scan the QR code:
9
BRITELINE™ 1500 SERIES
FEATURES
Compact and light weight construction allowing for minimisation
of pole/mounting costs
Remote Gear tray or Cast box options in 240V or 415V
Lamp support system for single ended lamp versions
KEY APPLICATIONS
Exterior Sports
Mines
Area
Facade
Heavy Industrial
Security
The Briteline™ 1500 series are reliable and trusted high
"
$ % Australia to suit Australasian conditions.
The range features High Pressure Sodium and Metal Halide
lamp options between 1000W & 1500W ideally suited for
medium to high mounting height applications.
High pressure die-cast DA401 aluminium body
Toughened 5mm glass
!
"
in either Specular (Narrow) or Peened (Wide) beam
OPTIONS AVAILABLE
Glare shield option
Wire guard option
#
10
SPORTS
Description
Type
Lamp
Base
Weight (kg)
BLP65 Elite 1000W HPS CWA 240V
High Pressure Sodium
LU1000
E39
12.0*
BLP65 Elite 1000W HPS CWA 415V
LU1000
E39
12.0*
BLP65 1000W HPS IR 240V
SHPT1000
E39
12.0*
BLP65 1000W MH IR 240V
Metal Halide
HSIT1000
E39
12.0*
BLP65 Elite 1000W MH CWA 240V
Metal Halide
M1000U/BT37
E39
12.0*
BLP65 Elite 1000W MH CWA 415V
Metal Halide
M1000U/BT37
E39
12.0*
Metal Halide
M1500T7/PE
Rx7s
12.5*
Metal Halide
M1500T7/7
Rx7s
12.5*
Metal Halide
M1500T7/7
Rx7s
12.5*
Metal Halide
M1500T7/7
Rx7s
12.5*
Note:
273
545
1200
5H
1000
4H
800
3H
600
2H
400
H
200
0
1
435
540
0
-90
Sail Area: 0.24m2
in this Direction
-60
-30
0
30
BLP 1500W T7
cd/kLm
Horizontal
Vertical
60
90
H
3H
2
5
10
20
2H
50
H
0
BLP 1500W T7
H
2H
H
4.0
4.5
5.0
3H
Multiplier
1.27
1.00
0.81
scan the QR code:
11
R2 MAXI
HIGH PERFORMANCE PROJECTOR
FEATURES
5 beam distribution options
+;<=><
?
%
+
J>>XZ
Compact double ended lamp source
Instant hot re-strike options
Rear compartment has simple tool free action for opening and
offers automatic lamp isolation for re-lamping
Uplighting version available complete with specially toughened lens
KEY APPLICATIONS
Exterior Sports
Facade
HDTV Sports Lighting
363
621
412
Ø491
120
471
Ø21
Sail Area: 0.20m2
in this Direction
Ø13
160
Ø13
\;]#
$
$
^
"
J%
to wide.
All components are precision designed and tooled to
maximise performance with the luminaire suitable for
1000W and 2000W short arc Metal Halide lamps, thus
making it ideal for Sports Stadiums, facade lighting and
large area lighting applications.
Die-cast aluminium housing and lens frame
_
;`j>{}_~
^"
Chemically toughened glass visor resistant to
"
Supportive wire mesh front cover

All position breathing connector
Vibration dampening galvanised steel trunnion
OPTIONS AVAILABLE
Stainless steel hail guard option
Glare shield options
Reinforced cable sleeving between ignitor box and body
Dimmable
12
SPORTS
Description
Type
Lamp
Base
Weight (kg)
Order Code
With Built-On Ignitor, Without Ballast (please order separately)
R2 Maxi 1KW Type 1 Narrow
Metal Halide
HSI-TD 1000W
Cable
10.0
5NA 726 0-1VS11
Metal Halide
HSI-TD 2000W
Cable
10.0
5NA 726 0-1WS11
Metal Halide
HSI-TD 1000W
Cable
10.0
5NA 726 0-1VS21
Metal Halide
HSI-TD 2000W
Cable
10.0
5NA 726 0-1WS21
Metal Halide
HSI-TD 1000W
Cable
10.0
5NA 726 0-1VS31
Metal Halide
HSI-TD 2000W
Cable
10.0
5NA 726 0-1WS31
R2 Maxi 1KW Type 4 Wide
Metal Halide
HSI-TD 1000W
Cable
10.0
5NA 726 0-1VS41
Metal Halide
HSI-TD 2000W
Cable
10.0
5NA 726 0-1WS41
Metal Halide
HSI-TD 1000W
Cable
10.0
5NA 726 0-1VS51
Metal Halide
HSI-TD 2000W
Cable
10.0
5NA 726 0-1WS51
With Built-On Ignitor For Instant Hot Re-Ignition, Without Ballast (please order separately)
R2 Maxi 1KW/2KW Type 1 Narrow
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA 726 7-1WS11
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA 726 7-1WS21
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA 726 7-1WS31
R2 Maxi 1KW/2KW Type 4 Wide
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA 726 7-1WS41
R2 Maxi 1KW/2KW Type 5 Wide
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA 726 7-1WS51
21000
5H
17500
4H
14000
3H
10500
2H
H
3500
0
-90
1
2
7000
1
50
5
10 20
0
-60
-30
0
30
R2 Maxi 2000W Type 1
cd/kLm
Horizontal
Vertical
60
90
H
3H
2H
H
0
H
2H
H
25.0
30.0
35.0
3H
Multiplier
1.00
0.69
0.51
scan the QR code:
13
R3 MAXI
HIGH PERFORMANCE PROJECTOR
FEATURES
7 beam distribution options
+;<=><
?
%
+
J>>XZ
Compact double ended lamp source
A robust and practical locking catch secures the rear, which can
be opened for maintenance without tools
Lightweight and compact housing achieving minimal windage areas
KEY APPLICATIONS
Exterior Sports
Facade
\ ;{ # ^
highest demands in terms of performance, visual comfort,
illumination of sports arenas and large public areas.
It’s innovative construction combines state-of-the-art
lighting and luminaire technology to achieve light output
ratios up to 87% and utilises 1000W and 2000W short arc
Metal Halide lamps.
Die-cast aluminium housing and cover ring
_

j>]
"
high-purity surface coating
Safety glass optical enclosure
All-round weather resistant seal
Integrated pressure equalisation system
Integral terminal and ignitor box
Zinc plated steel mounting bracket
OPTIONS AVAILABLE
Stainless steel hail guard option
Dimmable
Glare shields
SLA outdoor lighting
14
SPORTS
Description
Type
Lamp
Base
Weight (kg)
Order Code
R3 Maxi 1000MH Type 1 Narrow
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP11
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1WP11
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP21
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1VP21
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP31
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1WP31
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP41
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1WP41
R3 Maxi 1000MH Type 5 Wide
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP51
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1WP51
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP61
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1WP61
Metal Halide
HSI-TD 1000W
Cable
10.00
5NA7560-1VP71
Metal Halide
HSI-TD 2000W
Cable
10.00
5NA7560-1WP71
With Built in Igniter for Instant Hot Re-Ignition
R3 Maxi 1000/2000MH Type 1 Narrow
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP11
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP21
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP31
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP41
R3 Maxi 1000/2000MH Type 5 Wide
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP51
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP61
Metal Halide
HSI-TD 1000/2000W
Cable
14.5
5NA7567-1WP71
scan the QR code:
15
R3 MAXI
21000
5H
17500
4H
14000
3H
10500
2H
7000
H
3500
0
0
-90
-60
-30
0
30
cd/kLm
Horizontal
Vertical
60
90
H
3H
1
2
510 50
20
2H
H
0
H
2H
H
25.0
30.0
35.0
3H
Multiplier
1.00
0.69
0.51
16
SPORTS
17
S2 MAXI
FEATURES

%"
Adjusting scale on both sides of housing with ratchet mechanism
and twist protection
Lamping without tools via housing cover opened from rear
Automatic lamp isolation switch when opening rear housing
(Double ended only)
KEY APPLICATIONS
Exterior Sports
Interior Sports
Area
HDTV Compatible
\]#
"

#"
The S2 Maxi offers a unique bi-symmetric distribution with
??%^
"
and uniform illuminance at low or high mounting levels.
Die-cast aluminium housing
Sandblasted aluminium surface
`
"
Toughened glass enclosure
All-round weather resistant seal
Integrated pressure equalisation system
Zinc plated steel mounting bracket
OPTIONS AVAILABLE
Multiple lamp type options
Reinforced cable sleeving between ignitor box and body
Dimmable
18
SPORTS
Description
Lamp
Socket
Weight
(kg)
Narrow Distribution
Order Code
Diffuse
Order Code
Without Control Gear, With Attached Ignitor
S2 Maxi HIT/HST 1000W
1x HIT/HST 1000W
E40
21.8
----
5NA 753 0-1VS-1
S2 Maxi HIT/HST 250/400W
2x HIT/HST 250/400W
E40
21.0
----
5NA 753 0-2TS01
Without Control Gear, With Attached Ignitor
S2 Maxi HIT-DE 1000W
HSI-TD 1000W
Screw-Type Terminal
20.5
5NA 753 0-1VB02
5NA753 0-1WS02
S2 Maxi HIT-DE 2000W
HSI-TD 2000W
Screw-Type Terminal
22.5
5NA 753 0-1WB02
5NA753 0-1WS02
24.5
5NA 753 7-1WB02
5NA 753 7-1WS02
Without Control Gear, With Attached Ignitor, (With Hot Re-Ignition)
S2 Maxi HIT-DE 1000/2000W
HSI-TD 1000/2000W
Screw-Type Terminal
900
5H
750
4H
600
3H
450
2H
300
H
150
0
0
-90
-60
-30
0
30
S2 Maxi 2000W Wide
cd/kLm
Horizontal
Vertical
60
90
H
3H
1
2
5
10
20
50
2H
H
0
S2 Maxi 2000W Wide
H
3H
2H
H
25.0
30.0
35.0
Multiplier
1.00
0.69
0.51
scan the QR code:
19
NIGHTSTAR COURT MASTER
ENVIRONMENTAL LUMINAIRE ASYMMETRIC DISTRIBUTION
FEATURES
Integral control gear
\
?%
Horizontal spigot mounting option available with 0° upcast
KEY APPLICATIONS
Exterior Sports
Tennis
Outdoor Car Park
Area
The Nightstar Court Master luminaire offers excellent spill
light control while providing ideal light distribution for
sporting applications.
The streamlined body offers an aesthetically pleasing
luminaire and is ideal for low mounting situations such as
tennis courts.
One piece corrosion resistant die-formed Marine
grade aluminium uni-body construction completely
water tight
`
"
chemically brightened providing a forward throw
asymmetric distribution
5 mm tempered glass lens fully contained in
extruded aluminium frame. The silicone sealed and
gasketed lens assembly is mounted to the housing
with concealed hinges and secured with stainless
steel screws
An electro-statically applied powder coat which is
?
%;`>>J<
as standard
OPTIONS AVAILABLE
Colour options
Dimmable
Arduous location point protection
20
SPORTS
George Adler Tennis Centre, Leichardt, Ipswich, Queensland
Description
Type
Lamp
Base
Weight (kg)
Order Code
C/Master 1000W MH PS 240V
Metal Halide
M1000/U/PS/BT37
E39
25.5
S51301
C/Master 1000W MH PS 415V
Metal Halide
M1000/U/PS/BT37
E39
25.5
S51302
C/Master 1000W MH 240V
Metal Halide
M1000/U/BT37
E39
33.0
S51308
C/Master 1000W MH 415V
Metal Halide
M1000/U/BT37
E39
33.0
S51309
120°
180°
4H
90°
90°
60°
60°
3H
2
2H
50
H
10
20
5
0
500
H
30°
0°
30°
Court Master 1000MH PS
cd/kLm
Horizontal
2H
3H
2H
H
0
H
Court Master 1000MH PS
H = 8m Upcast = 5deg
Vertical
2H
H
8.0
9.0
10.0
3H
Multiplier
1.00
1.79
0.64
scan the QR code:
21
A3 MAXI
FLOODLIGHT
FEATURES
Single hand self locking rear access lamp chamber
Breather to protect against condensation
Asymmetric light distribution up to 66°
Narrow beam and wide beam optics
Maximum upcast range up to 85° with adjustment in 5° steps
Automatic lamp isolation switch when opening rear housing
(Double lamps ended only)
Reinforced stainless steel cable sleeving between ignitor box
and body
KEY APPLICATIONS
Exterior Sports
Outdoor Car Park
Factories
Precinct
Security
Heavy Industrial
HDTV Compatible
\ `{ # "
? ^? facilities, industrial facilities, airport apron lighting, logistics terminals, port facilities, athletics facilities and ski jumps.
Two-piece die-cast aluminium housing
Zinc plated galvanised steel mounting bracket
High transmission factor toughened glass visor
All round EPDM seal providing excellent ingress protection
$"
"
OPTIONS AVAILABLE
Glare shields
Dimmable
Arduous location corrosion protection
Upward waste light hood
22
SPORTS
Description
Lamp
Base
Watts
Weight
(kg)
Order Code
Wide
Order Code
Narrow
A3 Maxi HIT/HST 1000W
MH/HPS
E40
1000W
21.9
5NA76901VS01
-
A3 Maxi HIT 600/1000W
HIT-CE
G22
1000W/600W
21.1
5NA76901VS04
5NA76901VB04
A3 Maxi 2x HIT 400/600/1000W
HIT-CE x 2
G22
400W/600W/1000W 22.6
5NA76902VS04
5NA76902VB04
A3 Maxi HIT-DE Longarc 2000W
T10
K12S-36
2000W
22.1
5NA76901WS03
5NA76901WB03
A3 Maxi HIT-DE 1000W
HSI-TD
K12S-36
1000W
22.1
5NA76901VS02
5NA76901VB02
A3 Maxi HIT-DE 2000W
HSI-TD
K12S-36
2000W
22.1
5NA76901WS02
5NA76901WB02
A3 Maxi HST 600W
HPS
E40
600W
21.9
5NA76901US01
5NA76901UB01
A3 Maxi HIT-DE 1000W/2000W (Hot Re-strike)
HSI-TD
K12S-36
1000W/2000W
25.4
5NA76971WS02
5NA76971WB02
ACCESSORIES
Article
Order Code
A3 Maxi Glare Shield Options
A3 Maxi UWL Hood
XNA0005
scan the QR code:
23
A3 MAXI
INSTALLATION DETAILS
Sail area calculated
in this direction.
Sail area = 0.13m2
24
SPORTS
25
SAMPLE SPORTS LIGHTING LAYOUTS
26
SPORTS
SQUARE FIELD SPORTS LIGHTING LAYOUTS BRITELINE T10 SERIES
SOCCER
40. 5M
Field Size 100m x 70m
4 x 25m Columns
MF = 0.80
8 x BL65S 2000W T10
4 x BL65P 2000W T10
40. 5M
70M
Eh(ave) = 110 lux
min/ave = 0.80
min/max = 0.61
100M
61M
61M
HOCKEY
32.5M
Pitch Size 91m x 55m
8 x 18m Columns
MF = 0.80
20 x BL65S 2000W T10
12 x BL65P 2000W T10
32.5M
55M
Eh(ave) = 500 lux
min/ave = 0.90
min/max = 0.75
91M
35M
16M
16M
35M
27
FOOTBALL CODE SPORTS LIGHTING LAYOUTS
-
AUSTRALIAN RULES
MF = 0.80
4 x 25m Columns
57M
16 x BL65S 2000W T10
8 x BL65P 2000W T10
57M
135M
Eh(ave) = 104 lux
min/ave = 0.70
min/max = 0.45
165M
62M
62M
RUGBY
44M
4 x 18m Columns
MF = 0.80
4 x BL65S 2000W T10
8 x BL65P 2000W T10
44M
68M
Eh(ave) = 115 lux
min/ave = 0.63
min/max = 0.36
116M
32M
32M
28
TWIN TENNIS
10 x Court Master 1000MA
7 x 7m Columns
MF = 0.8
Eh PPA* = 390 lux U1 = 0.77
Eh TPA =375 lux U1 = 0.44
36M
24M
17M
11M
17M
11M
14M
*T.P.A = Total Playing Area
P.P.A = Practical Playing Area
29
SPORTS
TYPICAL TENNIS COURT LIGHTING LAYOUTS COURT MASTER
TYPICAL TENNIS COURT LIGHTING LAYOUTS COURT MASTER
SINGLE TENNIS
4 x NightStar Court Master M1000/PS/U/BT37
4 x 8m columns
MF = 0.8
Eh PPA* = 364 lux U1 = 0.70
Eh TPA = 300 lux U1 = 0.34
36M
24M
11M
17M
14M
*T.P.A = Total Playing Area
P.P.A = Practical Playing Area
30
SPORTS
Jamestown Pool, Jamestown, South Australia
31
REMOTE CONTROL EQUIPMENT
?
?
%
$
do not have integral gear capability.
WEATHERPROOF CAST BOX
A cast aluminium alloy body provides a solid weatherproof housing catering for lamp ratings from 150 watts through
2000 watts. These housings include ballasts, capacitors, termination facilities and the provision of fuses and long distance
ignitor. Where required, blocking inductors may be included.
GEAR TRAY
A galvanised steel gear tray for in-pole or cabinet mounting for lamp ratings from 35W through to 2000W. The gear tray
includes ballasts, capacitors, termination facilities with the option of fuses, long distance ignitors and blocking inductors.

+ ~ \ Z %
? ` ? `
website for more details.
32
SPORTS
REMOTE CONTROL GEAR
15
25Ø
185
391
426
335
96
235
188
40
80
25.5Ø
HOLES
28
40
115
15
Dimensions in MM
Lamp
Gear Tray
Item No.
Gear Type
Supply
Voltage
Line
Start
Line
Run
L
W
H
Mounting
Centres
Weight
(kg)
SHP-T-1000
F45116UNI
Ignitor Reactor
240V
5.05A
4.93A
400mm
152mm
155mm
371mm
14.7
SHP-T-1000
F45216UNI
Ignitor Reactor
415V
3.20A
2.90A
400mm
152mm*
155mm
371mm
21.0
LU1000
F45204U
CWA
415V
3.74A
3.08A
400mm
152mm
155mm
371mm
14.0
SHP-TS-600
F46100U
Ignitor Reactor
240V
4.15A
3.11A
400mm
152mm
155mm
371mm
10.0
HCI-TM 400W
F22115NI
Ignitor Reactor
240V
3.06A
2.08A
287mm
134mm
100mm
265mm
3.9
HQI-TM 600W
TBA
Ignitor Reactor
240V
TBA
TBA
TBA
TBA
TBA
TBA
TBA
HQI-TM 1000W
F23130U
Ignitor Reactor
240V
5.82A
4.89A
400mm
152mm
155mm
371mm
11.6
HQI-TM 1000W
F23230U
Ignitor Reactor
415V
3.54A
2.87A
400mm
152mm*
155mm
371mm
11.6
HSI-T-1000W
F23117U
Ignitor Reactor
240V
5.72A
4.71A
400mm
152mm
155mm
371mm
7.6
HSI-TD-1000W
F23130U
Ignitor Reactor
240V
5.82A
4.89A
400mm
152mm
155mm
371mm
11.6
HSI-TD-1000W
F23230U
Ignitor Reactor
415V
3.54A
2.87A
400mm
152mm*
155mm
371mm
11.6
HSI-TD-2000W
F29204U
Ignitor Reactor
415V
5.69A
5.60A
400mm
152mm
155mm
371mm
17.0
M2000T10/DE
F29204U
Ignitor Reactor
415V
5.69A
5.60A
400mm
152mm
155mm
371mm
17.0
HSI-TD-2000W
F29400
CWA
415V
4.50A
6.00A
455mm
185mm
142mm
435mm
21.0
M2000T10/DE
F29400
CWA
415V
4.50A
6.00A
455mm
185mm
142mm
435mm
21.0
M2000T10/DE
F39104U
CWA
240V
7.80A
10.40A
455mm
185mm
142mm
435mm
19.0
Note:
* Tray 152mm wide but ballast overhangs each side 11.5mm.
For cast box version replace F prefix with V (for cast box weight add 3.5kg).
For fused trays and boxes add suffix F.
Control Gear is Power Factor Corrected to 0.9.
Information is based on data at time of publication and does not acknowledge typical component tolerances which should
be clarified before installation by user.
33
THE SYLVANIA SPORTS LIGHTING CONTROL
SYSTEM FOR ENERGY EFFICIENCY
Sylvania Lighting Australasia has partnered with le
leading
global systems control companies to develop a lighting
control unlike any other.
The Sylvania Outdoor Lighting Control System allows the
user total control of all aspects of remote lighting
monitoring, outage and fault reporting and mobile control
of lighting systems down to the individual luminaire.
A user friendly online interface ensures that users have full
visibility into their system regardless of their location with
app development having reached the level where the
user can control whole lighting grids inclusive of venue
lighting and vicinity lighting using their internet enabled
mobile device.
For councils and lighting maintenance professionals, the
Sylvania Outdoor Lighting Control System offers a complete solution to assist with day to day operations such
as setting dimming and lux levels dependant on venue
requirements thus helping achieve balance between
Additionally, maintenance schedule planning can be
-
ing to ensure that
unnecessary maintenance is not programmed or conversely, that if a fault is present, it may be addressed immediately.
The Sylvania Streetlighting Contorl System is also the only
evolutive system on the market and ensures that not only
can the user achieve control of their system from anywhere, but can achieve further cost savings in energy
reductions through the effective programming of lamp
run times, ballasts and the use of adaptive lighting such
%
$
conditions.
The Sylvania Environ system is Intelligent Control Gear for
High Performance Sylvania luminaires.
It combines the benefits of electronic lamp control with the
reliability of conventional electro-magnetic control gear
and is compatible with High Pressure Sodium and Metal
Halide lamps from 150W to 2,000 Watt.
Incorporating the Active Reactor controller, lamps will
operate at least 50% longer while consuming substantially
less energy whilst providing the user a reliable lighting
system.
Benefits of the Sylvania Environ System
Benefits:
Saves Energy
•
20% typically through the Environ maintaining constant lamp output.
Costs savings
•
Payback - by dimming the lamp less energy is used and lamp replacement
intervals are increased.
Extends Lamp Life
•
Life is extended by over 50% by dimming (under running) the lamp.
Reduces Maintenance
•
By dimming (under running) the lamp life is extended leading to longer lamp
replacement intervals.
Constant Uniformity
•
Constant Lux levels are achieved by the Environ control gear automatically
adjusting lamp output to compensate for lamp and luminaire dirt depreciation.
Reduction In Greenhouse
Gases
•
Through energy reduction and extended lamp life, the Environ assists in reducing
greenhouse gases.
34
Lighting Tower featuring R3 Maxi at Drummoyne Cricket & Football Oval, New South Wales
35
AWARD WINNING SUCCESSES
IES Award Winning Design & Installation: Cranbourne Racecourse, VIC
The installation of an energy efficient lighting design
and control system in one of Victoria’s most popular
race courses has gathered international interest and
seen SLA receive two IES Awards: Lighting Design
Excellence for Australia and New Zealand and the
Australian Lighting Energy Efficiency Design Award for
2013.
The Cranbourne Turf Club is a thoroughbred horse
racing Club situated 40km SE of Melbourne. As a
second Victorian night racing venue, Cranbourne
now complements the existing Moonee Valley night
program.
In 2010, under the auspices of Racing Victoria Limited,
Australian Sportsvision Consultants were engaged to
design the lighting and all associated electrical and
control systems for the project.
The lighting design and consequent installation allows
the venue to host as many as fifteen night race
meetings in the normal racing year thus ensuring that
track operators can control their lighting requirements
to meet the needs of race broadcasters as well as
patrons and to meet energy efficiency requirements.
The principle objective was the track needed to be lit
to the required standard for television broadcasting
with the flexibility for lights to be dimmed during nonbroadcast times.
Sylvania completed the final lighting design, supplied
the state-of-the-art lamps, lamp control, dimming
technology and Environ control gear, aimed all the
floodlights and verified the design lighting levels.
The lighting solution employed by Sylvania Lighting
Australasia included the installation of a total of 48
masts at heights ranging between 20mtrs to 25mtrs.
750 Siteco 2kW R2 Maxi metal halide projector
floodlights were installed and focussed to illuminate
the 2200 metre track with a total lighting load for the
36
system of 1.5MW.
The project drew on the twin expertise of both
Australian Sportsvision Consultants and Sylvania’s
expertise in designing effective lighting solutions for
outdoor sporting and entertainment venues with
an emphasis on ensuring that the installation also
achieves optimal efficiencies in energy consumption.
ISylvania’s Environ System includes the Active
Reactor, a programmable energy management
device that is applicable to a wide range of
commercial lighting applications. For the Cranbourne
installation, the Active Reactor was used to run the
lamps at constant lumens and also to dim the lamps
as necessary. Using the Active Reactor system, by
operating the lamps at constant lumens an energy
saving of 17% is realised, however, by combining this
with dimming an energy saving of 33% is realised.
During the course of a night race meeting the lights
are dimmed before the first race starts, dimmed in
between the races and dimmed after the last race
finishes. Typically the lights are dimmed for 75% of
the time during a race meeting. This not only realises
a 33% energy saving overall but delivers a range of
broader benefits; it increases the life of the lamps and
reduces the obtrusive effects of spill light and glare
into the neighbourhood that borders the track.
The control system has been able to accommodate
the varied requirements throughout the length of a
meet. For constant lumen output, the Active Reactor
control gear was used to run all lamps at constant
lumens to produce a constant 1200 lux on track.
When not needed for broadcast, the lights are
dimmed to 900 lux on track. This is in contrast to the
Photofinish area where during races lighting levels are
pushed up to 3000 lux for the photofinish camera. A
Siemens custom developed PLC control system was
used to control all the switching, sequencing and
monitoring functions of the lighting installation.
Bringing Light to the Home of The Cats, Geelong FC, VIC
The challenge: specify a sports lighting installation
that delivers the level of illumination necessary
to meet broadcast standards for high definition
TV yet also offers enough control to deliver an
environmentally-sensitive solution that is accepted
by surrounding residents and operators of local
commercial properties.
Home to more than forty Australian Rules games per
year, and hosting many other high profile sports and
entertainment events, Simonds Stadium switched on
the lights during June to host the Geelong Football
Club’s first ever night match at the home of the
beloved Geelong Cats AFL team.
Working closely with Aurecon Consulting Engineers
and McKnights Electrical, Sylvania Lighting Australasia
designed, supplied and commissioned a lighting
solution to integrate with the new 70 metre-high
profile masts. These masts have been installed as part
of a multi-million dollar upgrade to Simonds Stadium
to provide lighting for AFL matches that will be
televised in high definition through partner TV stations.
environment.
The project was completed with 487 Sylvania/Siteco
2KW Metal Halide floodlights evenly spread over
the four towers (104 off) including 71 roof mounted
floodlights.
Essential to such demands is the need for high
colour rendering lamps. All lamps used deliver colour
rendering of Ra90+ and 5600K colour temperature
which are used for high quality picture definition and
site enhancement.
While the majority of the arena is illuminated from
the high mast towers, roof obstructions from the
Grandstand and stringent floodlight exclusion zones
meant roof mounted floodlights were required
to maintain camera verticals and boundary
illumination near the field perimeter. A combination
of asymmetric and symmetric beam floodlights
were needed to maintain this camera vertical and
horizontal illumination at the field boundaries.
The demands of high definition TV herald a change
in television broadcast sports lighting with sharper
images, greater contrast resulting in more detailed
viewing. The completed lighting was designed to
meet both the AFL and Free TV Australia Operation
Guidelines of digital and high definition televised live
production.
Close offset lighting, employing roof mounted
floodlights, required careful consideration in terms of
the location of the floodlights and the distribution to
help soften intensities. The roof-mounted symmetric
beam floodlights utilised internal glare filters to
reduce intensities and prevent illumination levels
exceeding high limits. This delivers acceptable and
compliant glare limits for spectators and on-field
participants including players.
All non-televised modes comply with the obtrusive
light standard, AS4282-1997 with floodlight elevation
reduced to minimise glare to motorists and brightness
to the surrounding area. This is compliant with strict
Luminous Intensity (level 1 control) and Threshold
Increment parameters. Spill light does not exceed
the maximum permissible values of 10 lux residential
and 25 lux commercial at relevant boundaries thus
maintaining sensitivity to the Stadium’s surrounding
In addition to the HDTV lighting mode, the lighting
installation facilitates two non-televised modes which
are controlled by a C-bus system and provide for
professional training (200 lux) and competition (500
lux) lighting levels making the lighting installation
extremely adaptable for the needs of a wide range of
purposes.
37
Sylvania Lighting Australasia Pty Ltd
Sylvania Way, Lisarow NSW 2250 | Locked Bag 9, Gosford NSW 2250
P: 1300 728 988 | F: 1300 728 844 | E: [email protected]
www.sla.net.au