PRINTING ARTWORK PREPARATION Bleeding Safe Zone
Transcription
PRINTING ARTWORK PREPARATION Bleeding Safe Zone
Artwork Specification Business Card Box Artwork Specification Content Page Nos. Printing Artwork Preparation 1 Preparing Artwork Files for Business Card Box 2 PRINTING ARTWORK PREPARATION Top Cover / Top Panel artwork needs to Bleed out onto the Left Dust Flap (instead of the Left Dust Flap bleeding out towards the Top Panel). Bleeding - Add 2.0mm for bleeding on all sides. - Except for back panel, Bleed out 3.0mm onto the lock flap. Safe Zone - 5.0mm on all sides from the edges. Image - All images are in CMYK colour mode only. - Resolution of all images MUST be set to 300dpi or above. Font - Font size CANNOT be LESS than 4.0 points. Line - Line thickness CANNOT be LESS than 0.25 points. Artwork - Required file format: Adobe Acrobat Document 4 - Version 1.3 (.pdf). EXAMPLE Full Bleed Trim Size Safe Zone Perforation Line 2mm Full Bleed - Extend your background design to this edge, and bleeding all round. 2mm Perforation Line 2mm Left Dust Flap Safe Zone Trim Size - Product size. - Anything left beyond this line will be cut off. - All your important contents (text, images, logos, etc.) within this area. 2mm Right Dust Flap Top Cover 2mm 3mm Lock Flap Creasing Line 2mm Back Side A Front Side B 2mm 1 R www.excard.com.my Artwork Specification Business Card Box Artwork Specification PREPARING ARTWORK FILES FOR BUSINESS CARD BOX Step 1: Prepare 3 pdf files for your artwork: Page 1 - Full artwork with die-line (with Die-Line Indicator) Page 2 - File for artwork to be printed only. Page 3 - Die-line only (with Die-Line Indicator) Step 2: Step 3: Zip all PDF files together (In zip format) or Combine and save into 1 PDF file (3 pages) Upload your artwork to place order. 2 R www.excard.com.my