Data Sheet - Marq Packaging Systems

Transcription

Data Sheet - Marq Packaging Systems
Case Erectors
Case Sealers
Product Settlers
Tray/Bliss Formers
HPE-215
Case Erector Bottom Sealer
Our “215” Case Erector Bottom Sealer is a perfect entry-level machine. Its small footprint and big case
range make it ideal for use in space-restricted areas. This model can produce up to 15 cases per minute
and is designed for 24/7/365 operation.
This machine features a continuous-feed stack hopper which is ergonomically friendly and adjustable
to accommodate several case sizes. It also features a dual vacuum cup opening system that provides
a powerful, consistent grip for setting up the case. A dual flight lug conveying system provides square
cases with even sealing and stable internal case dimensions, and the bottom of each case is sealed
with pressure-sensitive tape.
Talk to a MARQ representative to see why this machine would work best for your application.
Case Erectors
Case Sealers
Top & Bottom Vacuum Cups
Product Settlers
Tray/Bliss Formers
Continuous Feed Hopper
• Secure and open the knockdown
case
EZ Touch Screen
• Ergonomically Friendly
• Can be reloaded while operating
Machi n e S p e c i f i c a t i o n s
Operating Conditions
Use in dry, relatively clean environment at 40°F to
120°F (5°C to 49°C) with clean, dry boxes.
Power Requirements
Electrical:
115V Single Phase 12 amp
Pneumatics: 1.5 / Cycle
Operating Rate
Up to 15 cases per minute depending on the case
length.
Case Specification
175 to 275 P.S.I. bursting test, single wall A, B, C
flute
* (Case ranges as stated are valid as long as the “G” dimension is above 8”.)
• Help speed up changeovers and
PLC adjustments
Machine Features
Heavy Duty Construction
•Frame is 3/16” steel construction
•KEYKOTE 36 (Plated Parts)
•Designed for 24/7 Operation
Flexible/Fully Automatic/ Versatile
•Erects and bottom-seals a wide range of case
sizes
•Right-Hand or Left-Hand controls are available
•Easily adjustable
•Handcrank or motorized adjustments
Outboard Tape Head
•Easy tape roll replacement
Components Available Locally
•Allen Bradley, Square-D, Numatics, Festo, Ross,
Direct Logic & Banner
Case R a n g e
Formed Case
Length
06.00” min
Width
05.25” min
Height
03.50” min
Knockdown Size
Length
12.00” min
Width
10.50” min
27.00” max
17.00” max
18.00” max
MAIN AIR
ARCH (MOTORIZED)
17" DOOR SWING
43.00” max
33.00” max
TOP RAIL
HAND ADJUST
90 7/8" OVERALL
11"
BOTTOM LEFT RAIL HAND CRANK ADJUSTMENT
OFFSET GUARDING
FRAME GUARDING
SHAFT
GUARD
MAIN ELECTRICAL
(DIRECT LOGIC PLC)
35 9/16"
35 9/16"
TAPE HEAD
100 5/16"
OVERALL
CONSTANT EDGE
14"
28 1/8"
NIP ROLL MOTOR
18"
* Machine should not be washed down or subjected to conditions causing moisture
condensation on the components.
* Optional stainless steel construction with NEMA 4 for washdown environments is
42 3/4"
STACK LIFT MOTOR
STACK LOAD
70 1/8"
LIGHT STACK BEACON
(OPTIONAL)
TOP SECTION
TAPE HEAD
CASE TURNER
FUNNEL DROP
(OPTIONAL)
24" STACK HOPPER
available.
37 1/2"
GUARDING
* Each machine is designed and based on the customer’s application and case
37 1/2"
DECK HEIGHT
size.
* Machines are also available if the case is above or below the stated minimum or
maximum. Please call factory for specfics.
24" CUSTOMER
CONVEYOR HEIGHT