Basic map of China - ellenjmchenry.com

Transcription

Basic map of China - ellenjmchenry.com
Basic map of China
Target age group: grades 2-8
Time allowance: At least 30 minutes, more if you want the map colored carefully and thoughtfully.
Materials you will need:
Photocopies of the map printed onto card stock or calligraphy paper (regular paper will do)
one copy per student
Photocopies of the labeled page printed onto clear transparencies, one per student
Colored pencils (crayons as a substitute)
Scotch tape or clear packing tape
One or more permanent markers in yellow, orange or red (for one student, one marker is
enough)
Directions:
1) Have students label the map. See the key for what to label.
2) Have student color the map, using tan for desert areas, blue for water, green for warm
climates with good farming areas.
3) Use the permanent markers to trace over the dotted lines on the transparecies. This will
make the country lines show up much, much better when overlayed on the map.
4) Put the transparency on top of the map and tape with clear tape over the top edge so
that the transparecy can be flipped up if you want to view the map without the modern country
lines. Make sure the students understand that the country lines are imaginary and that they are
modern country lines, not those of ancient China.
EXTRA FEATURE: I have provided an extra pattern page that can be photocopied onto the back
of the basic map. The outlines of Pennsylvania and Texas are intentionally backwards. If you photocopy them onto the back of the map, then you will be able to hold the map (looking at the front)
up to the light and see through the page so that the outlines of the states are superimposed onto
the map of China. This gives you a size comparison for how large China is compared to the US.
CHINA FACT: The Chinese do not call their country China. They call it “The Middle Kingdom,”
which in Chinese is “Zhong Guo.”
ellenjmchenry.com
WHAT TO COLOR AND LABEL
(Of course, you are welcome to add more!)
With the overlay, the map should look something like this:

Similar documents

illmod 600 12.02.02 2002 18542 since 1999 fire retardant resin

illmod 600 12.02.02 2002 18542 since 1999 fire retardant resin Short Description illmod 600 is an impregnated, precompressed foam tape. Since 1965, this tape has proven itself in driving rain resistant joint sealing in aboveground buildings. Since January 11, 1999, illmod 600 complies with all parameters required by DIN 18542 according to BG1 by the terms of the ift Test Report of January 11, 1999. Consistent high quality is ensured by permanent in-house and independent monitoring. Material Open-cell flexible polyurethane foam impregnated with a flame-retardant artificial resin. Colours ● Anthracite ● Grey Product Advantages ● Independently monitored during driving rain resistance up to 600 Pa (by MPA Bau (Construction), Hannover) ● Open to water vapour diffusion ● Self-adhesive on one side to facilitate installation ● Can be coated with commercially available vinyl emulsion paints ● Meets the RAL-Assembly Requirements Availability On pre-compressed rolls, self-adhesive on one side.

More information