Veröffentlichungen Extrusion und Kautschuktechnologie 2013

Veröffentlichungen - 2013
Extrusion und Kautschuktechnologie
Hopmann, Ch.; Begemann, M.; Martens, J.
Formeigenschaften mit Additiven beeinflussen
Kunststoffe 102 (2013) 2, S. 30-32
Hopmann, Ch.; Begemann, M.; Martens, J.
Influencing forming properties with additives
Kunststoffe 102 (2013) 2, S. 14-16
Hopmann, Ch.; Behmenburg, C.; Recht, U.
Functionalising of elastomer parts using special injection moulding
processes
Rubber meets Science 2013 - Proceedings of the 1th Technical
Conference & Exhibition, Aachen, October 14-15, Institut für
Kunststoffverarbeitung (IKV), S. 1-13
Hopmann, Ch.; Behmenburg, C.; Recht, U.
Manufacturing of elastomeric hollow bodies using the projectile
injection technique
13th International Polymer Colloquium, Wisconsin, Madison, 26. April
2013, S. 1-29
Hopmann, Ch.; Behmenburg, C.; Recht, U.
Manufacturing of fibre-reinforced cavities made of LSR by using the
projectile injection technique
Conference Proceedings: Silicone Elastomers 2013, 10.-12. Juni 2013,
München, S. 1-8
Hopmann, Ch.; Behmenburg, C.; Recht, U.
Neue Verfahren für bessere Siliconformteile
K-Berater 58 (2013) 1, S. 20-21
Hopmann, Ch.; Behmenburg, C.; Recht, U.
Spritzgießen elastomerer Formschläuche mittels
Projektilinjektinstechnik
Tagungsband: Kunststoffe automotive Powertrain, 20.-21. November
2013, Stuttgart
Hopmann, Ch.; Behmenburg, C.; Recht, U.; Zeuner K.
Injection Molding of Superhydrophobic Liquid Silicone Rubber
Surfaces
Silicon 6 (2014) 1, S. 35-43, ISSN 1876-990X
Seite 1 von 5
Hopmann, Ch.; Dering, J. P. ; Sitz, S.; Fallasch, M.
Improvement of the mixing effect of a pin barrel extruder by pin
geometry variation
Tagungsband "Science meets tires - Perspectives for Tire Technology",
11.-12. September 2013, Aachen, S. 80-83
Hopmann, Ch.; Dering, J. P.
Presentation of current research projects and equipment at IKV
Rubber meets Science 2013 - Proceedings of the 1th Technical
Conference & Exhibition, Aachen, October 14-15, Institut für
Kunststoffverarbeitung (IKV), S. 1-8
Hopmann, Ch.; Eilbracht, S.
Analyse der Strömungsvorgänge in mehrstufigen Blasköpfen mittels
Netzwerktheorie und Ansätze zur automatischen
Fließkanaloptimierung
Blasformen und Extrusionswerkzeuge 9 (2013) 5, S. 6-11
Hopmann, Ch.; Eilbracht, S.
Blow head design and optimization
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, Poster, S. 2342
Hopmann, Ch.; Eilbracht, S.
Interdependency of machine settings and temperature profiles
13th International polymer Cplloquium, Madision, April 26th 2013, S. 1-19
Hopmann, Ch.; Eilbracht, S.
Vorsprung durch Simulation
Plastverarbeiter 64 (2013) 4, S. 22-23
Hopmann, Ch.; Eilbracht, S., Morgenroth, R.
Interdependency of machine settings and temperature profiles - an
experimental study on extrusion embossing for the replication of
microstructures
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, S. 10711078
Hopmann, Ch.; Funk, A.
Blasformen von Siliconkautschuken
Tagungsband zur VDI-Tagung Blasformen, 05.-06. Juni 2013, BadenBaden, S.157-166
Hopmann, Ch.; Funk, A.
Blow moulding of silicone elastomers – New approach for
innovative rubber processing
Rubber meets Science 2013 - Proceedings of the 1th Technical
Conference & Exhibition, Aachen, October 14-15, Institut für
Kunststoffverarbeitung (IKV), S. 1-14
Hopmann, Ch.; Funk, A.
Radialwendelverteiler für den Einsatz im Blasformen
Blasformen und Extrusionswerkzeuge 9 (2013) 5, S. 12-18
Seite 2 von 5
Hopmann, Ch.; Funk, A.
Radialwendelverteiler für den Einsatz im Blasformen
Blasformen und Extrusionswerkzeuge 9 (2013) 5, S. 12-18
Hopmann, Ch.; Funk, A.
Testing of a Pancake die in coextrusion blow molding
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, Poster, S. 2487
Hopmann, Ch.; Funk, A.
The potential of the extrusion blow molding process to produce
complex hollow parts of solid silicone rubber
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, S. 318-323
Hopmann, Ch.; Grammel, S.
Plastifizierzone virtuell auslegen
Kunststoffe 103 (2013) 10, S. 220-224
Hopmann, Ch.; Grammel, S.
Virtual Melting and Feed Section Design
Kunststoffe international 103 (2013) 10, S. 145-149
Hopmann, Ch.; Hendriks, S.; Hildebrand, T.; Kabasci, S.; Radusch, H.-J.;
van Lück, F.; Zepnik, S.
Morphology, mechanicalproperties and thermoforming behaviour of
extrusion foamed cellulose ester
15th Annual Conference ""Blowing Agents & Foaming Processes 2013"",
Mainz, 14.-15. Mai 2013, S. 1-8
Hopmann, Ch.; Martens, J.
Thermoformen von Mikrostrukturen mit einer dynamischen
Werkzeugtemperierung
Kolloquium Mikroproduktion, 8. Oktober 2013, Braunschweig
Hopmann, Ch.; Puch, F.
Fasern und Nanofüllstoffe in Kombination
Kunststoffe 103 (2013) 3, S. 99-102
Hopmann, Ch.; Rasche, S.
Integrative Simulationsmethoden beim Streckblasformen von PETFlaschen
Fachtagung "Kunststoffe + SIMULATION 2013", 10.-11. April 2013,
München, S. 1-16
Hopmann, Ch.; Recht, U.
Rubber technology at IKV - Linking academic power with industrial
experience
Rubber meets Science 2013 - Proceedings of the 1th Technical
Conference & Exhibition, Aachen, October 14-15, Institut für
Kunststoffverarbeitung (IKV), S. 1-3
Hopmann, Ch.; Schippers, S.
PLA recycling with degassing
bioplastics magazine 8 (2013) 3, S. 46-47
Seite 3 von 5
Hopmann, Ch.; Schippers, S.
Recycling of PLA
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, Poster
Hopmann, Ch.; Schippers, S.
Recycling of polylactide for packaging applications
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, S.1-5
Hopmann, Ch.; Sitz, S.
Continuous extrusion of physically foamed silicone rubber profile
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, S. 2580 - 2584
Hopmann, Ch.; Sitz, S.
Optimisation of the cellular structure or chemically foamed rubber
profiles
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, Poster, S. 2459
Hopmann, Ch.; Sitz, S.
Physical Foaming of Silicone Rubber Profiles
ANTEC 2013 - Conference & Tradeshow, Ohio, Cincinnati, April 21-24.
Society of Plastics Engineers, Poster, S. 2463
Hopmann, Ch.; Sitz, S.; Merke, M.; Göbel, E.
Foaming of silicone rubber with physical blowing agents in an
extrusion process
Blowing Agents and Foaming Processes, 15th Annual Conference, 14.15. Mai 2013, Mainz, Deutschland, Paper 6 - Sitz, S. 1-10
Hopmann, Ch.; Sitz, S.; Recht, U.; Lemke, F.
Physical foaming of silicone elastomers
Rubber meets Science 2013 - Proceedings of the 1th Technical
Conference & Exhibition, Aachen, October 14-15, Institut für
Kunststoffverarbeitung (IKV), S. 1-10
Hopmann, Ch.; Windeck, Ch.; Eilbracht, S.; Yesildag, N.
Numerical Analysis of Flow Phenomena in the Extrusion Process –
A Review on Simulation Research at the IKV
Proceedings der ANSYS Conference & des 31. CADFEM Users´
Meetings 2013 (2013) S. 1-26
Hopmann, Ch.; Windeck, Ch.; Hennigs, M.
Extrusion foaming of thermoplastic cellulose acetate from
renewable resources using a two-component physical blowing
agent system
Proceedings of the Polymer Processing Society 29th Annual Meeting PPS 29 - July 15-19, 2013, Nuremberg, Germany, Poster
Seite 4 von 5
Hopmann, Ch.; Windeck, Ch.; Hennigs, M.
Increased output of blown film extrusion lines by using a cooling
sleeve
Proceedings of the Polymer Processing Society 29th Annual Meeting PPS 29 - July 15-19, 2013, Nuremberg, Germany, Poster
Hopmann, Ch.; Windeck, Ch.; Siegbert, R.; Kurth, K.; Elgeti, S.
Improving the automated optimization of profile extrusion dies by
applying appropriate optimization areas and strategies
Proceedings of the Polymer Processing Society 29th Annual Meeting PPS 29 - July 15-19, 2013, Nuremberg, Germany
Seite 5 von 5