Product Catalog

EF
SERIES
BULLETIN NO. EF0212
ELECTRIC
CHAIN
HO I S T
125kg
250kg
500kg
1000kg 2000kg
Three phase and Single phase
Single and dual speeds
Direct and low voltage control
Highly economical
Emergency stop
as option
Note: All measurements used in this catalogue
are based on metric figures(Sl unit system).
KITO EF Series
Electric Chain Hoist
Capacities
Single phase hoist:250 to 1000kgs, three phase hoist: 125 to 2000kgs.
5
Dual Speeds
Dual speed is available for each model on 3 phase hoists.
Interchangeable Mechanical Parts
1
Mechanical parts are almost interchangeable between those of
3 phase and single phase hoists for easy maintenance.
Standard Voltages and Frequencies
2
3 phase: 220/380V-50Hz, 415V-50Hz,346V-50Hz and 220/440V-60Hz.
1 phase: 220V, 240V-50Hz, 110V, 115V, 220-60HZ and 230V-50/60Hz.
Approved
C.S.A (Canada) D.B.G (Germany)
Marine Dept. (New Zealand)
1
Pull-Rotor Type Motor Brake
2
Pull-Rotor Type Motor
3
Wear-Resistant Friction Clutch
4
Special Load Chain
5
Aluminum Hoist Body
D.I.R (Australia)
6
Exclusive Pull-rotor type motor braking system provides high braking
capability for the most sure way to stop the load at the desired positions.
Totally enclosed exclusive pull rotor type motor permits ideal operation of
hoists. (Insulation Class B)
KITO's friction clutch,which prevents from over-winding,allows the motor
to run free at the highest and lowest hook positions. The Friction Clutch is
factory preset and needs no adjustment under normal operations.
Exclusively developed case hardened alloy steel chain with high and
uniform strength complies with JIS specifications. ND chain is available for
use in such applications where rain, sea water,steam, chemical or other
harmful atmosphere might affect regular chains.
Aluminum die-casting hoist body provides lighter weight, compactness, high
mobility and rapid heat dissipation. Totally enclosed weather-resistance
construction allows ideal use in humid atmosphere.
(Equivalent to IP 54 Grade as specified by I.E.C. Push button swich IP 65)
6
Quick Change of Voltage
7
Highly Insulated Push Button Station
4
7
To change from the voltage to the other, it is only necessary to change the
position of lead wires on three phase hoists.
Push button station enclosed in a high insulation plastic houseing."UP" and "DN"
buttons are mechanically interlocked for safe swich operations. Low Voltage: 48V
push button station and direct voltage model are available on request on both 3
phase and single phase hoists.
Emergency Stop Device is available as option upon request.
8
3
Swivel Bottom Hook
Drop-forged heat treated hook does not fracture but opens slowly when excessively
overloaded. Built-in bearing assures easy swiveling of bottom hook.
Overload warning device: Load Bell is available as option for warning overloading.
Features of Trolleys
Developed motorized trolleys with exclusive motor combined directly with trolley brake for
simple mechanism and accurate positioning of loads.
Also, plain and geared type trolleys are developed with protective lugs as standard.
All trolleys are adjustable for various beam widths including wider width are option.
8
EF, EFL, EFS, EFSL
Dual Speed Type
Single Speed Type
Capacity
(kg)
125
250
250
500
500
1000
1000
2000
125
250
250
500
500
1000
1000
2000
EF: 3 phase, hook suspension type, direct voltage control. EFS: 1 phase, hook suspension type, direct voltage control. "L" in code shows low voltage control system.
Code
3phase
D.V.C.
EF001S
EF003L
EF003S
EF005L
EF005S
EF010L
EF010S
EF020L
EF001SD
EF003LD
EF003SD
EF005LD
EF005SD
EF010LD
EF010SD
EF020LD
L.V.C.
EFL001S
EFL003L
EFL003S
EFL005L
EFL005S
EFL010L
EFL010S
EFL020L
EFL001SD
EFL003LD
EFL003SD
EFL005LD
EFL005SD
EFL010LD
EFL010SD
EFL020LD
Std.
Lift
(m)
1phase
D.V.C.
—
—
EFS003S
EFS005L
EFS005S
EFS010L
—
—
—
—
—
—
—
—
—
—
3.0
3.0
Push
Button
Cord:L
(m)
2.8
2.8
2.9
2.9
3.0
3.0
3.0
3.1
2.8
2.8
2.9
2.9
3.0
3.0
3.0
3.1
Motor
Lifting Speed M.P.M.
kW
Duty Rating
0.3
0.3
0.45(0.25)
0.45(0.25)
0.8(0.4)
0.8(0.4)
1.5
1.5
0.3/0.1
0.3/0.1
0.45/0.15
0.45/0.15
0.8/0.27
0.8/0.27
1.5/0.5
1.5/0.5
50
50
50(30)
50(30)
50(30)
50(30)
50
50
40/40
40/40
40/40
40/40
40/40
40/40
40/40
40/40
50Hz
10.0
5.0
8.0(3.8)
4.0(1.9)
7.0(3.5)
3.5(1.8)
6.5
3.3
10.0/3.3
5.0/1.7
8.0/2.7
4.0/1.3
7.0/2.3
3.5/1.2
6.5/2.2
3.3/1.1
60Hz
12.0
6.0
9.6(4.6)
4.8(2.3)
8.4(4.2)
4.2(2.1)
7.8
3.9
9.3/3.1
4.6/1.5
9.6/3.2
4.8/1.6
8.4/2.8
4.2/1.4
7.8/2.6
3.9/1.3
Load
Chain
Falls
(Lines)
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Min.
Headroom Test Load
:C
(kg)
(mm)
156
490
313
525
313
510
625
550
625
560
1250
635
1250
630
2500
800
156
490
313
525
313
510
625
550
625
560
1250
635
1250
630
2500
800
Mass (Net Weight) (kgs)
1phase
3phase
D.V.C.
D.V.C.
L.V.C.
—
28
26
—
31
29
32
31
28
36
35
32
45
44
41
50
49
46
—
59
56
—
65
62
—
28
26
—
31
29
—
31
28
—
35
32
—
44
41
—
49
46
—
61
57
—
67
63
•Figures in parentheses are data for single phase hoists. Other data for single phase hoists are same as the figures for 3 phase hoists.
•Data for EFSL are same as the data for EFS. Codes for EFSL are specified as EFSL 003S and EFSL 005L.
•D.V.C.=Direct voltage control L.V.C.=Low voltage control.
•Data in column "Duty Rating" are shown by % ED for 50Hz and TIME RATING(minutes) for 60Hz.
EFSP(EFSG), EFLSP(EFLSG), EFSSP(EFLSG), EFSLSP(EFSLSG)
Dual Speed Type
Single Speed Type
Capacity
(kg)
125
250
250
500
500
1000
1000
2000
125
250
250
500
500
1000
1000
2000
Code
3phase
D.V.C.
EFSP(EFSG)001S
EFSP(EFSG)003L
EFSP(EFSG)003S
EFSP(EFSG)005L
EFSP(EFSG)005S
EFSP(EFSG)010L
EFSP(EFSG)010S
EFSP(EFSG)020L
EFSP(EFSG)001SD
EFSP(EFSG)003LD
EFSP(EFSG)003SD
EFSP(EFSG)005LD
EFSP(EFSG)005SD
EFSP(EFSG)010LD
EFSP(EFSG)010SD
EFSP(EFSG)020LD
L.V.C.
EFLSP(EFLSG)001S
EFLSP(EFLSG)003L
EFLSP(EFLSG)003S
EFLSP(EFLSG)005L
EFLSP(EFLSG)005S
EFLSP(EFLSG)010L
EFLSP(EFLSG)010S
EFLSP(EFLSG)020L
EFLSP(EFLSG)001SD
EFLSP(EFLSG)003LD
EFLSP(EFLSG)003SD
EFLSP(EFLSG)005LD
EFLSP(EFLSG)005SD
EFLSP(EFLSG)010LD
EFLSP(EFLSG)010SD
EFLSP(EFLSG)020LD
Std.
1phase
Lift
(m)
D.V.C.
—
—
EFSSP(EFSSG)003S
EFSSP(EFSSG)005L
3.0
EFSSP(EFSSG)005S
EFSSP(EFSSG)010L
—
—
—
—
—
—
3.0
—
—
—
—
SP: complete with TS2 model plain trolley. SG: complete with TS2 model geared trolley.
Push Std.Hand Min.
Min.
Flange Width Adjustibility (mm)
Button Chain Headroom
Radius
Option
Cord:L Length
:C
For Curve
Standard
W20*
W30*
(m) : N (m)
(mm)
(mm)
2.8
480(495)
2.8
520(535)
50 to 102 103 to 203
1100(1300)
2.9
500(525)
(58 to 127) (128 to 203) 204 to 305
2.9
540(555)
(204 to 305)
2.7
3.0
550(565)
3.0
630
128 to 203
1300
58 to 127
3.0
625
(128 to 203)
154 to 305(154 to 305)
1500
3.1
775
—
82 to 153
2.8
480(495)
2.8
520(535)
50 to 102 103 to 203
1100(1300)
2.9
500(525)
(58 to 127) (128 to 203) 204 to 305
2.9
540(555)
(204
to
305)
2.7
3.0
550(565)
3.0
630
128 to 203
1300
58 to 127
3.0
635
(128 to 203)
154 to 305(154 to 305)
1500
3.1
775
—
82 to 153
Mass (Net Weight) (kgs)
1phase
3phase
D.V.C. L.V.C. D.V.C.
31(39) 33(41) —
34(42) 36(44) —
33(41) 36(44) 37(45)
37(45) 40(48) 41(49)
46(54) 49(57) 50(58)
54(59) 57(62) 57(63)
64(69) 67(72) —
74(78) 77(81) —
31(39) 33(41) —
34(42) 36(44) —
33(41) 36(44) —
37(45) 40(48) —
46(54) 49(57) —
54(59) 57(62) —
66(71) 69(74) —
76(80) 79(83) —
•Data for motor, lifting speed, load chain falls and test load are same as the data for EF, EEFL, EEFS, EEFSL.
•W20*, W30* mean 203 and 305mm beam width adjustability respectively as option.
•In case of only straight 1-beam, 0.5ton plain trolley can be used on 58mm and less width beam and 1ton plain trolley and geared trolley can be used on 74mm and less width beam.
•Economical trolleys available upon request.
•Figures in parentheses are data for geared trolley type hoists.
EFM, EFLM
Dual Speed Type
Single Speed Type
Capacity
(kg)
125
250
250
500
500
1000
1000
2000
125
250
250
500
500
1000
1000
2000
M:complete with motorized trolley
Code
3phase
D.V.C.
EFM001S
EFM003L
EFM003S
EFM005L
EFM005S
EFM010L
EFM010S
EFM020L
EFM001SD
EFM003LD
EFM003SD
EFM005LD
EFM005SD
EFM010LD
EFM010SD
EFM020LD
L.V.C.
EFLM001S
EFLM003L
EFLM003S
EFLM005L
EFLM005S
EFLM010L
EFLM010S
EFLM020L
EFLM001SD
EFLM003LD
EFLM003SD
EFLM005LD
EFLM005SD
EFLM010LD
EFLM010SD
EFLM020LD
Push
Std. Button
Lift Cord:L
(m)
(m)
3.0
3.2
kW
0.3
0.4
3.0
3.2
Min.
Min. Mass(Net Weight )(kgs)
Flange Width Adjustibility (mm)
Traveling Speed
Headroom
Radius
M.P.M.
Option
3phase
:C
For
Curve
Standard
60Hz
Duty Rating 50Hz
W20*
W30*
D.V.C. L.V.C.
(mm)
(mm)
56
54
530
59
57
565
59
56
550
58 to 127
128 to 203 204 to 305
63
60
590
1500
20
24
40
72
69
600
83
80
685
—
154 to 305
58 to 127(128 to 153)
93
90
675
2000
115
112
860 100 to 153(154 to 178)
—
179 to 305
56
54
530
59
57
565
59
56
550
128 to 203 204 to 305
58 to 127
63
60
590
1500
40
20
24
72
69
600
83
80
685
—
154 to 305
58 to 127(128 to 153)
95
91
675
117
2000
113
860 100 to 153(154 to 178)
—
179 to 305
Motor 3 phase
(For Traveling)
0.3
0.4
•Data for hoist motor, lifting speed, load chain falls and test load are same as the data for EF, EEFL.
•W20*, W30* mean 203 and 305mm beam width adjustability as option.
•Data in column "Duty Raing" are shpwn by % ED for 50Hz and TIME RATING(minute) for 60Hz.
•Figures in ( )show one inch (25mm) wider than standard as option by using standard range suspension shaft and adding extra spacers.
EF,EFS
EFSP,EFSSP EFSG,EFSSG
e
e1
123
EF
EFL
EFS
EFSL
EFM
a
d
Contactor
box
b
e2
L
C
g
Hook suspension type,
Hook suspension type,
single fall chain Cap.
double fall chain Cap.
125,250,500,1000kgs 3 Phase(EF), 250,500,1000,2000kgs 3 Phase
250,500kgs 1 Phase(EFS)
500,1000kgs 1 Phase
Plain trolley type
Geared trolley type
p
B
u
EFSP
EFLSP
EFSSP
EFSLSP
Motorized trolley type
o
t
123
Dimensions (mm)
a
b
d
e
e1
e2
f
g
h
i
j
k
o
p
q
s
u
SP
SG
SP
SG
MF
SP
SG
MF
SP
SG
MF
s
Contactor
box
Capacity (kg)
500-L
500-S
e3
L
C
125-S
250-L
250-S
1-L
1-S
2-L
143(218)
143(218)
147(241)
147(241)
147(224)
147(224)
169(253)
169(253)
140
140
148
148
167
167
183
183
159
159
174
174
218
218
233
250.5
260[270]
260[270]
269[282]
269[282]
311[390]
311[390]
348.5[417.5]
366[435]
182[195]
182[195]
202[281]
202[281]
232[301]
293[362]
180.5[190.5] 180.5[190.5]
SP
SG
MF
SP
SG
e3
f
q
g
EFSG
EFLSG
EFSSG
EFSLSG
590[680]
590[680]
610[700]
610[700]
750[830]
765[845]
870[910]
970[1010]
580[670]
580[670]
600[690]
600[690]
740[820]
755[835]
860[900]
940[980]
595[685]
595[685]
615[705]
615[705]
755[835]
755[835]
860[900]
940[980]
630[720]
630[720]
650[740]
650[740]
790[870]
810[890]
915[955]
1030[1070]
182
182
182
182
182
236
236
280
236
236
236
236
236
236
236
280
24
24
24
24
24
31
31
37
276
276
276
276
276
306
306
342
201
201
201
201
201
203
203
236
510
510
510
510
510
510
510
510
152
152
152
152
152
152
152
154
46
46
46
46
46
56
56
69
204
204
204
204
204
249
249
300
345
345
345
345
345
345
345
385
76
76
76
76
76
95
95
112
106
106
106
106
106
106
106
109
100
100
100
100
100
102
102
115
19
19
19
19
19
28
28
34
28
28
28
28
28
28
28
34
25
25
25
25
25
24
24
32
B-45
B-45
B-45
B-45
B-45
B-48
B-48
B-57
B-48
B-48
B-48
B-48
B-48
B-48
B-48
B-57
B-45
B-45
B-45
B-45
B-45
B-45
B-45
B-56
s
f
t
123
Contactor
box
L
N
e3
C
g
EFM
EFLM
i
j
C
h
u
q
t
s
e3
L
C
g
The contactor box for emergency stop device is attached
outside hoist body when the hoist is 125kg or 250(L)kg for
L.V.C. and dual speed type.
•Dimension are approximate. •Dimension for dual speed hoists are the same as for single speed hoists.
•Figures in brackets are data for large size chain containers. •Figures in parentheses are data for L.V.C.
•Any lift of chains is available on request. KITO chains are case hardened.
No addition to the chain to increase the length is possible. The chain
must be replaced with a new one of desired length. Specify the length of
the chain when ordering.
•Chain container
Max. lift (m)
Capacity
(kg)
Chain containers made of canvas shown
small large
12
6
125-S, 250-S
in the right table are available on request.
6
3
250-L, 500-L
When the lift of your hoist exceeds the
15
8
500-S, 1000-S
maximum lift values shown in the right
7.5
4
1000-L, 2000-L
table, a chain container made of steel is
available on request including the lift range of canvas made container.
•Side plates of KITO trolleys are specially mounted to shaft, which allows
the trolley to travel smoothly on the I-Beam. Thus, the load is equally
distributed over the four track wheels.
•The Beam on which the trolley travels must be at least 125mm (in case of
2 ton: 150mm) in height for the smooth and sure operation of the trolley.
p
B k
u
q
Standard dimension of hook
Standard dimension of load chain link
g
p
d
e
b
b a
a
c
d
(mm)
(mm)
g
Hoist
Capacity
(kg)
d
Trade
side
125 Top
28
250
28 17.5 23.5 17.5 35.5
24
500 Bottom
125
250
500-L
5
6.3
18
15
Hoist
Capacity
(kg)
a
b
c
d
e
a
b
Inside Outside
width
width
p
Pitch
1000 T&B 36.5 22.5 31 22.5 42.5 31
500-S
1000-L
6.3
7.9
22
19
2000 T&B 47.5 29
1000-S
2000-L
7.1
8.9
25
21
40
T: Top hook B: Bottom hook
29
50
37
Tokyo Opera City Tower 16th Floor,
3-20-2 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-1416, JAPAN
TEL: +81-3-5371-7315, FAX: +81-3-5371-7349
E-mail: [email protected]
URL: http://www.kito.co.jp
International Sales Subsidiaries
U.S.A.
HARRINGTON HOISTS, INC.
401 West End Avenue, Manheim, PA 17545, U.S.A.
TEL: +1 717-665-2000 FAX: +1 717-665-2861
URL: http://www.harringtonhoists.com
CANADA
KITO CANADA INC.
309-3815 1st. Avenue, Burnaby, BC, V5C 3V6, CANADA
TEL: +1 604-291-9955 FAX: +1 604-294-8855
E-mail: [email protected]
URL: http://www.kito.ca
GERMANY
KITO EUROPE GmbH
Heerdter Lohweg 93, D-40549 Düsseldorf, GERMANY
TEL: +49-(0)211-528009-00 FAX: +49-(0)211-528009-59
E-mail: [email protected]
URL: http://www.kito.net
CHINA
JIANGYIN KITO CRANE CO., LTD.
18 Cheng Jiang East Road, Jiang Yin, Jiang Su 214429, CHINA
TEL: +86-510-86199666 FAX: +86-510-86196633
URL: http://www.kaicheng.com
SHANGHAI KITO TRADING CO., LTD.
Room 11J, Zao-Fong Universe Building, No1800 ZhongShan West Road Shanghai 200235, CHINA
TEL: +86 21-54488935 FAX: +86 21-54488937
URL: http://www.kito.com.cn/
THAILAND
SIAM KITO CO., LTD.
700/243 M.1, Amatanakorn Industrial Estate Phase 2,
Bangna-Trad KM.57, T.Bankao, A.Panthong, Chonburi 20160, THAILAND
TEL: +66-3846-8205 FAX: +66-3846-8195
URL: http://www.siamkito.co.th/
KOREA
KITO KOREA CO., LTD.
1208. Gyeonggi Venture Anyang Technical College Center 572-5,
Anyang8-Dong, Manan-Gu, Anyang-si, Gyeonggi-Do, 430-731, KOREA
TEL: +82-31-455-8780 FAX: +82-31-455-8786
Features and performances of all the products described in this catalogue are designed for their own intended purposes.
KITO will not be held liable for any malfunction, lack of performance or accident if the product is being used in conjunction with any other equipment.
If the product is to be used for unintended purposes, please confirm with your dealer in advance.
All rights reserved.
All specifications herein are subject to change without notice.
Distributed by:
Printed in Japan 22.07(A.H)EF02-03