3m quick splice connectors insulated terminal assortment electrical

SHOP
NYLON CABLE TIES
HELMETS
With ultraviolet protection.
Sold 100 per bundle.
Order No.
704-K0040
705-K0050
701-K0060
709-K0070
702-K0001
706-K0051
Length
inches
4”
6”
7”
8”
11”
14”
APPAREL
Width
inches
.100”
.140”
.187”
.300”
.187”
.300”
Retail
$.07 ea.
.09 ea.
.10 ea.
.12 ea.
.17 ea.
.25 ea.
EYE
PROTECTION
TERMINAL REMOVAL TOOL
Designed for use on wire harness electrical connectors for removal of
wires from the plastic housing. Individual handles for access in tight
places. Terminal removal kit contains 12 pieces for use on round and
flat terminals.
No. 12-5771-K5992
LATEX GLOVES
PROTECTIVE
GEAR
12 piece kit
Tube of 50
Tube of 50
EXHAUST
$49.95
CHAINS &
SPROCKETS
Superior punture, tear and chemical resistance with excellent dexterity. Powder free
minimizes the risk of developing latex protein
residue related allergies. 14 mil (fingers and
palm) for maximum chemical resistance. 12”
cuff length protects wrists and forearms.
No. 12-7092 L-E5271
No. 12-7092 XL-E5271
TIRES/
WHEELS
DRIVE
BRAKES
$25.95
25.95
ELECTRICAL TAPE
ENGINE
Quality PVC electrical tape with UL listed. Package 3/4”
wide x 60 ft. rolls. Sold each.
No. 11-2277-E0210
$1.95
AIR/FUEL
CHEMICALS
ELECTRICAL
3M QUICK SPLICE CONNECTORS
For use with 14, 16, and 18 gauge wire. Order 100/bag.
No. L132-E5200
BATTERIES
SPARK PLUG
INDEXING WASHERS
$.40 ea.
Indexed spark plugs align the open end of the electrode toward the
intake port. The hottest flame meets the new fuel charge for a performance gain, and increased mileage and plug life. Measurements:
gold .75mm, silver 1.00mm, purple 1.25mm and red 1.60mm.
No. 11-4488-K5220
No. 11-4489-K0520
Twin cylinders, 8pc.
Triple cylinders, 12pc.
$3.75
4.15
CONTROLS
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
RATCHET SPARK PLUG WRENCH
Contains the most popular types of insulated terminals. Approximately
175 pieces. Packaged in a clear plastic box.
This 13/16” ratchet spark plug wrench is made specifically for
watercooled 2-stroke motorcycles, ATV’s and watercraft. The ratchet
mechanism makes installation and removal of the spark plug very
easy. Use one side for installation and flip it over for removal.
No. LTA18P-K5941
No. 11-5142-E0401
INSULATED TERMINAL ASSORTMENT
www.marshalldistributing.com
$22.95
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$16.20
741
SHOP
TRAILER
MERCHANDISING
SHOP
PLUG JAKS
HELMETS
3-WAY PLUG WRENCH
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
DRIVE
No. 11-5706-E0740
HEAVY DUTY SPARK
PLUG WRENCH
EXHAUST
CHAINS &
SPROCKETS
Cast, plated combination wrench fits 14mm or 18mm spark plugs.
Wrench size: 20mm and 26mm.
No. 11-0172-E0240
$6.95
BRAKES
CHEMICALS
Two Spark Plug Holder
Mounts any place under the
hood.
T-HANDLE PLUG WRENCH
12mm plug wrench. Fits NGK “D” series and ND “X” series.
120mm long.
No. M4110-E0130
$5.25
Yellow plastic universal plug holder
protects a single plug from damage.
Helps maintain plug gap. Sold each.
SPARK PLUG GAP TOOL
No. 11-8480-E0420
.025, .030, .034, .035,
.040 and .045.
CONTROLS
UTV
ACCESS.
$3.95
SPARE PLUG and BULB CADDIES
ELECTRICAL
BATTERIES
$7.95
No. 2016-E0420
ENGINE
AIR/FUEL
Three Spark Plug Holder
Rivet mounted caddy keeps 3 spare
plugs handy for quick and easy
changes. Includes 4 rivets.
Cast, plated combination wrench fits 10-12-14mm spark plugs.
Wrench size: 18mm and 20mm.
No. M240-E5920
$4.95
No. 8150-E0120
$3.95
$3.50
Holds 2, 14mm spark plugs and is
small enough to fit in your pocket.
LUGGAGE
RACKS &
ACCESS.
No. 11-0170-E0210
$1.95
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
IGNITION SYSTEM TESTER
• Test the integrity and strength of your ignition system.
• Spark gap is adjustable from 0 to 10mm.
• The larger the gap your ignition will jump, the stronger your system
is.
• Will test the ignition on most motorcycles, watercraft, ATVs &
snowmobiles.
No. 3116-E0460
$9.95
742
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
Stores 2 spark plugs (14 or 18mm), 2
taillight bulbs and headlight bulb. Also
has space for spare inner throttle or
brake control wires.
No. L300-E8900
$4.95
2012
SHOP
CHAIN BREAKERS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
Works on all chain sizes from 420 to 630. A tough shop tool
featuring forged chromemoly frame and heat treated tool steel
tip and spindle. Tool pushes pin completely through chain link.
Handle folds to fit a small tool compartment for rider use. May
be used with impact wrench for shop use.
No. 11-1670-E5961
No. 11-1671-E0520
REPLACEMENT PIN
$25.95
www.marshalldistributing.com
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
T-6 CHAIN TOOL
$95.95
Three in one tool. Chain cutter, press and rivet tool works on
chain sizes 35-630. Comes complete with carrying case.
REPLACEMENT PIN
No. 12-5963-E5830
2mm
No. 12-5964-E5830
3mm
No. 12-5965-E5830
4mm
CHAINS &
SPROCKETS
DRIVE
• Innovative design will press, break and rivet 520, 525 and 530 chains with
one convenient tool.
• Versatile design will remove chain pins, press master-link plates and rivet
hollow nose and soft nose (quad stake) master link pins on O-ring and non
O-ring type chains.
• Easy to use design allows you to change tool functions by simply moving
the position of the anvil block.
• Indexing letters on movable anvil and body insures correct tool configuration. Simply line up the letter on the anvil to the letter on the body to get
the configuration you need!
• All components conveniently store on tool when not in use.
• All steel construction with heat treated components for strength and durability.
• May be supported in a vise or held with included handle.
• Great for the professional technician or DIY mechanic.
• Compact and light enough to carry in a tool bag for trail side repairs.
• Patent pending.
No. 12-4092-E0616
EXHAUST
$4.10
PBR (PRESS, BREAK, RIVET) CHAIN BREAKER
No. 5131-E5116
TIRES/
WHEELS
$94.95
$5.95
5.95
5.95
CONTROLS
• For breaking 520 to 530 chain.
• For pressing on and off 520 and some 525 clip type master
UTV
link side plates.
• Light weight, 6 oz. including press plates and handle (8 oz. ACCESS.
with pouch).
• Will push link pin completely through link/side plate.
LUGGAGE
• Handle detaches for easy storage. To reduce the weight even
more, an MP Tool (08-0161) 8mm combination wrench or
RACKS &
8mm socket with extension can be used as the handle.
• Custom pouch holds tool securely and includes pocket for ACCESS.
extra chain or master links and a large accessory pocket.
PLOWS &
• Body forged from high-strength 4130 chrome-moly.
IMPLEMENTS
• Body bolt and extractor bolt manufactured from billet highstrength 7075 T-6 Aluminum.
• Replaceable pin is heat treated for strength and wear resis- FRAME &
BODY
tance.
• Press plates manufactured from light weight 6061 T-6 aluminium.
SHOP
• Perfect addition for tool packs.
• For use on clip type master links with press fit plates only.
TRAILER
• This tool does not rivet master link pins.
• Does not rivet chain pins.
No. 12-8251-E5394
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$75.95
743
MERCHANDISING
SHOP
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
MINI CHAIN PRESS TOOL
This compact tool is designed to rivet D.I.D. ZJ rivet style links
and to cut and press side plates onto rivet or clip style connecting links. Designed to be used for D.I.D. 520, 525, 530 and
532 size chains. A handy denim pouch is included for storage.
No. 2115-E0547
$119.95
•Fits most standard and O-ring chains.
•Small, compact design.
•Hex key wrench is included.
•Made in the U.S.A.
No. 12-4862-E5901
$16.95
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
Works on chain sizes up to 530, including o-ring. Skin packed
for point-of-sale display.
No. M56400-E5811
CONTROLS
No. M56402-E0520
REPLACEMENT PIN
$19.75
$4.25
CHAIN ALIGNMENT TOOL
No. 12-7037-E5121
$18.95
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
• SKH9 tool steel grade cutting pin for strength and long life.
• Durable heavy duty sure-grip black composite handle.
• Black plastic carry box with all parts to press-fit and cut.
• Lifetime warranty on tool body and handle only.
• Presses all 40, 50 and 60 series sealed chain and cuts all 40
and 50 series chains.
No. 12-4734-E5998
744
All numbers in BLUE are new for this year.
MASTER LINK PLIERS
•Designed to simplify installation and removal of clip-type
master links.
•One tip is shorter and notched to be placed on the pin which
allows the longer end to push the clip.
$134.95
Ultra Dealers Buy For Less - Ask Us About It
No. 12-7061-E5921
$19.95
2012
SHOP
OIL FILTER REMOVAL TOOLS
HELMETS
Made in USA.
APPAREL
EYE
PROTECTION
Compact, close clearance designs developed to service hard-to-reach filters
faster and easier. Once in place, these close fitting tools have the high torque
capabilities needed to break loose the most stubborn seizures, more than
85 ft. lbs.
• Saves time removing stubborn filters in tight places!
• For use with 3/8” drive.
• Sold on card with application information.
Order No.
11-2393-E0690
Application
BMW
Fits filter no. 11421460845, on
all K75/100/1100, R1100
HARLEY-DAVIDSON
11-2393-E0690
Fits filter nos. 63805-80/T,
63806-83, on all FL/FX/XL
11-2395-E5501
Fits filter no. 15410-MJ0-003 on CB700/SC,
all V4’s thru ’90, most V twins
Fits filter no. 15410-MM9-003/13 on
VTR250, CB400F, CBR600, VT600C,
VLX600, NT650, CB750, VFR750,
PC800, CBR1000, ST1100,
VT1100, GL1500
11-2396-E0690
11-2395-E5501
11-2395-E5501
11-2398-E0690
HONDA
KAWASAKI
Fits filter no. 16097-1054 on all
EN450, EX500, VN700/750
SUZUKI
Retail
$15.95
$15.95
$17.50
PROTECTIVE
GEAR
Order No.
11-2393
11-2394
11-2395
11-2396
11-2397
11-2398
Size/Description
76mm, 14 flutes
74/76mm double step, 15 flutes
80mm, 15 flutes
65mm, 14 flutes
65/67mm double step, 14 flutes
68mm, 14 flutes
Order No.
Application
EMGO FILTERS
Fits our nos. M77, M78, M824,
M82410 for Harley
Fits our nos. M82220, M82230 for
Honda, Kawasaki and Yamaha
Fits our nos. M55660, M55670
for Suzuki
FRAM FILTERS
11-2394-E0690
11-2396-E0690
11-2398-E0690
11-2394-E0690
15.95
$17.50
Fits filter no. 16510-05A00 on all
GV700, VS700, GSXR750 ’86-87,
GV1200, GV1400
$17.50
Fits filter no. 16510-06B00 on all GSX600/750,
GSXR750 ’88-99, VS750, GV1400
15.95
Fits our nos. PH6010, PH6016, PH6022 for
Harley, Honda, Kawasaki & Suzuki
Fits our no. PH6017 manufactured in Korea
for Honda and Kawasaki
Fits our no. PH6017 & PH6018 manufactured
in Phillipines for Honda and Kawasaki
11-2396-E0690
11-2397-E0690
VESRAH FILTERS
11-2395-E5501
Fits our nos. VSF1004, VSF3008,
for Honda and Suzuki
Fits our nos. VSF1007, VSF4005,
for Honda and Kawasaki
Fits our no. VSF3009 for Suzuki
11-2396-E0690
11-2398-E0690
TIRES/
WHEELS
EXHAUST
Retail
$15.95
15.95
CHAINS &
SPROCKETS
DRIVE
BRAKES
15.95
ENGINE
$15.95
15.95
15.95
$17.50
15.95
15.95
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
OIL FILTER WRENCH
Gold Anodized
UTV
ACCESS.
Emgo nos. M82220 and M82230, Fram no. PH6017 and Vesrah no.
VSF1007. Fits many other Honda, Kawasaki and Yamaha models. Honda no.
07HAA-PJ70100, 15410-MM9-003/13
LUGGAGE
No. M27580-E5980
RACKS &
ACCESS.
$14.95
OIL FILTER MAGNET
SPIN-ON
OIL FILTER WRENCH
• Especially designed for use on Honda V-type engines.
• Will fit many Japanese brand motorcycles with 80mm diameter oil filters.
• Can torque filter to factory specifications.
• Use with a 3/8” drive ratchet or extension.
No. 12-7035-E0950
www.marshalldistributing.com
$8.95
PLOWS &
IMPLEMENTS
• Easy to install, just attach to base of standard oil filter.
• Standard oil filters only trap particles down to 20 microns, leaving the most
harmful 5 to 20 micron particles to circulate through your engine.
• Powerful six point magnet traps harmful, abrasive hard metal particles
down to 1 micron that a regular oil filter doesn’t.
• Available in two sizes to fit most spin on and cartridge oil filters.
• Reusable for up to 5 oil filter changes.
• Makes any oil filter better than a high performance oil filter.
No. 2605-E5670
No. 2604-E5670
3/4” & 13/16” hole filters
1” hole filters
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$11.95
11.95
745
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
SHOP
COOLANT
RECOVERY SYSTEM
HELMETS
A universal recovery system for
most water-cooled motorcycles
and ATVs. Designed for hot weather and/or high altitude riding condiEYE
tions. Prevents loss of coolant due
PROTECTION
to overheating. The bottle mounts
to your frame or behind your numPROTECTIVE
ber plate with the supplied strap.
GEAR
As the liquid boils, it is collected in the bottle. When the engine
cools, the water is recovered by the radiator. Includes bottle,
TIRES/
hoses, clamps, mounting strap and instructions.
WHEELS
APPAREL
No. 11-6291-E0502
THE GRUNGE BRUSH
The Grunge Brush™ is an adjustable brush designed for cleaning drive chains. The Grunge Brush™ is rugged, oil resistant
and can be used on O-ring and non O-ring chains. The brush
blocks are easily adjusted to fit any size chain. Replacement
brush blocks are available and sold separately.
No. 11-5309-E5280
Replacement brush blocks, set of 4
No. 11-5310-P5230
$12.95
$4.95
$31.95
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
BRAKE and CLUTCH
BLEEDER
• 10 ml of fluid per injection stroke.
• Includes adapters to fit most brake
systems and brake fluid cans.
• Compatible with all brake fluids.
No. 12-7800-E0817
ENGINE
BRAKE BLEEDER
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
RTS GRIPMASTER ICE STUDS
$106.95
Aids in the bleeding and servicing of hydraulic brakes. Makes
bleeding brakes a one person job. The unique check valve
allows fluid and air to escape while preventing air from re-entering the system. Instructions and hose included. Made in USA.
No. 11-5141-E0521
$19.50
for Snowmobiles and ATV/UTV tires
These studs, proven under the toughest conditions, are now available for
snowmobile tracks. Sharpened carbide tip provides excellent traction in icy
conditions. The solid 70° carbide head provides longer wear and superior
penetration. The specially designed thread is self-tapping and won’t pull out.
It’s easy to install, easy to remove and leaves only a tiny hole that doesn’t
load up with dirt or ice. No special tools required. No warranty on pull-out or
track damage. Installation times may vary. Recommend .5” length for ATV/
UTV tires.
Package contains 96 studs
Order No.
7338-P59211
7339-P59211
7400-P59211
Track Lug Height
less than 1.00
less than 1.25
1.25 or more
Length
.5”
.75”
1”
Retail
$159.95
159.95
159.95
Note:Check tire lug heights before installing. Not responsible for punctures of inner
tubes or air leaks.
CONTROLS
KOLD KUTTER® ATV ICE STUDS
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
Specifically designed for district 14 with head diameter of .25” and .170”
high.
CABLE LUBER
Used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once
lube runs out the far end, the cable is lubricated.
No. 12-7058-E0260
$9.50
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
Length
.375”
.500”
.625”
.75”
1.000”
Retail
$20.30
21.15
24.30
25.65
28.30
CABLE LUBRICATION TOOL
The easy way to lubricate the cables on your machine. Just
attach cable lube tool to either end of the cable, insert the
nozzle tube from your cable lube (sold separately) and spray.
Cables need not be removed from machine.
No. 11-2409-E0540
MERCHANDISING
Package contains 250 studs
Order No.
KK2054-P5121
KK2055-P5621
KK2056-P5541
KK2061-P5351
KK2057-P5961
$7.50
NOTE: Use PJ1 cable lube(PJ112) for best cleaning/lubrication ability.
746
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
HILL CLIMB/ICE SCREWS
ISR Legal, this screw features a large hex head
with a ball milled center for an aggressive bite in all
conditions.
Package contains 250 studs with lock-nuts
Order No.
7050-P5531
Stud Boy No.
HILL-P4
Thread
1”
2012
Retail
$18.95
SHOP
SHOP TOOLS
HELMETS
APPAREL
EYE
PROTECTION
INNER FORK DAMPER HOLDING TOOL
FLYWHEEL PULLER
KAWASAKI KDX/KX/KZ/ZX series front fork dampers. Plus many universal applications.
No. 11-0718-E5961
3/8” drive tapered square
PROTECTIVE
GEAR
Puller kit for pulling magneto flywheel or starter gear on Kawasaki Jet Ski
300/440/500. Will also fit Yamaha WR400F flywheel. Includes three 6 x 25
and three 8 x 40 bolts.
$28.50
No. 12-7054-E5781
$28.95
EXHAUST
CHAINS &
SPROCKETS
FLYWHEEL PULLER
CLUTCH HUB REMOVER TOOL
DRIVE
Includes all
necessary hardware.
HARLEY This tool is used for removing the clutch hub from the transmission mainshaft. For FL models ’30-70.
No. 11-2660-E8941
TIRES/
WHEELS
$32.50
BRAKES
ENGINE
Universal flywheel puller for all watercraft, snowmobile, motorcycle and other
small engines. Complete with hardware kit and adapters for male or female
removal.
CLUTCH BUTTON RETAINER CLIPS
No. L855-E5932
Import
$39.95
A must when taking your clutches apart. Holds buttons in place both during assembly and disassembly.
No. 11-5953-K0551
Pkg of 3
AIR/FUEL
CHEMICALS
$22.95
ELECTRICAL
BATTERIES
CLUTCH PULLER
for Polaris ATVs
CONTROLS
2 pc. Puller
Polaris ’75-00 with old style clutch. See other applications for newer style
pullers. Replaces no. 2870506. Specifications: 3/4” - 16 thread x 2”. Made
in USA.
No. 11-7164-E5971
UTV
ACCESS.
UNIVERSAL FLYWHEEL PULLER
Special 12 hole universal flywheel puller disc with 6mm and 8mm bolts.
Fits most Polaris models.
$29.95
No. 8771-E5994
Universal
LUGGAGE
$83.50
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
CLUTCH PULLER
for removal of 4-Stroke
Honda ATV clutchs
Removes clutch from most TRX400 Foreman, TRX450 Foreman, TRX500
Foreman and TRX500 Rubicon. (MP67)
No. 4245-E0514
35mm x 1.0 right hand thread - female $69.30
Removes clutch from most TRX500 Rubicon series. (MP22)
No. 4582-E5292
40mm x 1.5 right hand thread - male
www.marshalldistributing.com
FRAME &
BODY
FLYWHEEL PULLER
SHOP
Fits YAMAHA : WR250F ‘03-06
• Replaces OEM tool YM04141.
• M30 x 1.0 R.H Internal.
$48.95 No. 12-8261-E0541
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
TRAILER
$22.50
747
MERCHANDISING
SHOP
Skin packaged for display.
HELMETS
FLYWHEEL PULLERS
by Dennis Stubblefield
All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection.
Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8” fine thread bolts used
in all pullers. Made in USA.
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
2363 (MP16)
2364 (MP20)
4246 (MP31)
8204 (MP1)
8206 (MP6)
8207 (MP7)
8208 (MP9)
8209 (MP10)
8210 (MP13)
8211 (MP19)
8324 (MP11)
8466 (MP17)
8467 (MP18)
8771 (MP37)
8868 (MP21)
8869 (MP8)
11-0713 (MP30)
11-0721 (MP14)
11-1927 (MP5)
11-1935 (UP29)
11-2659 (MP39)
11-3343 (MP42)
11-3344 (MP43)
11-3346 (MP46)
11-9647 (MP63)
12-4138 (MP64)
12-4857 (B201)
12-4858 (MP65)
12-7470 (MP73)
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
NOTE: Dennis Stubblefield part numbers are in parenthesis.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
Order No.
2363-E5331
2364-E0241
4246-E5345
8204-E5711
8206-E5950
8207-E5950
8208-E5370
8209-E0570
8210-E5581
8211-E5260
8324-E5770
8466-E5380
8467-E5970
8771-E5994
Size/Description
26mmx1.0mm R.H. thread
28mmx1.0mm R.H. thread
50mmx1.5mm R.H. thread
27mmx1.0mm L.H. thread
18mmx1.5mm R.H. thread
w/hollow center bore
20mmx1.5mm R.H. thread
w/hollow center bore
20mmx1.5mm R.H. thread
16mmx1.5mm R.H. thread
3 hole disc 65mm dia. w/5mm bolts
14mmx1.5mmx45mm R.H. thread
22mmx1.5mm R.H. thread
18mmx1.5mm R.H. thread
w/hollow center bore
18mmx1.5mm R.H. thread
Universal 12 hole disc w/6mm
and 8mm bolts
Retail
$21.95
23.95
90.75
19.75
9.95
9.95
12.50
12.50
30.95
10.50
12.95
13.95
13.50
Order No.
8868-E5380
8869-E5243
11-0713-E5651
11-0721-E0932
11-1927-E0762
11-1935-E0514
11-2659-E0514
11-3343-E0944
11-3344-E5101
11-3346-E0641
11-9647-E5932
12-4138-E0514
12-4857-E0514
12-4858-E0533
12-7470-E5973
Size/Description
20mmx1.5mm R.H. thread
w/hollow center bore
30mmx1.5mm external thread
24mmx1.0mm R.H. internal thread
30mmx1.5mm R.H. external thread
35mmx1.5mm external thread
35mmx1.5 R.H. external thread
42mmx1.5mm R.H. external thread
38mmx1.5mm external thread
24mmx1.0mm R.H. external thread
26mmx1.0mm R.H. internal thread
24mmx1.5mm internal thread with
crankshaft and oil line cap included
33mmx1.5mm internal thread
16mmx1.5mm thread
30mmx1.0mm thread
28mmx1.0mm R.H. internal thread
Retail
$13.95
56.95
25.95
39.95
44.50
68.95
69.50
74.95
16.95
24.50
39.95
68.95
68.95
55.95
63.50
83.50
MERCHANDISING
748
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
2012
SHOP
FLYWHEEL
PULLERS
by Dennis Stubblefield
Application
ARCTIC CAT
Order No.
12-4138
ATV: Predator 500
HONDA
11-3344
8204
ATV: LT50, LTF250 ’03-09
ATV: ALT/LT50, ALT/LT125, LT160, ALT/LT185, LT250R ’85-92,
LT500R ’87-90
Cycle: JR50, RM50, TS50, RM60, RM80, RV/TC/TS90, DR100, TC/
TS100, DR125, DS125, GN125, RM125 ’90-93, SP125, TC/TS125,
DR200, RM/RMX250 ’90-94
Cycle: GS550, GS650, GS750, GS1000, GS1100 ’80
Cycle: RM80, RM125/250/370/400/465/500 ’75-89, PE175/250/400,
TS185, DR200, DR250 ’82-85, RL250, TS250 ’69-75, DR370, DR400,
TS400, DR500
ATV: LT160, LT230GE, LT230S, LT250E, LT250S
Cycle: Fits most 650-CS Rotax engine single cylinder models
11-3343
ATV: DS650 ’00-07
8869
Cycle: SX175/250 ’75-78 Densi ign.
8204
ATV: ATC/TRX70, ATC110 w/CDI, TRX125, ATC185/S, TRX200/SX,
ATC250R, FL250, TRX250R
BMW
BOMBARDIER/CAN-AM
Cycle: CRF50F ’04-09, MB5, NB50, SE50P, Z50R, ZB50, C70,
CT70, SL70, XL75, CH80, CR80R, CRF80F XL80/S, XR80/R,
CA100/102/105/110, XL100/S, XR100/R, CT110, CR125R, CR250R,
CR450R, CR480R, CR500R (all CR’s ’78-94)
Cycle: MR50 ’74-75, QA50 ’71-75, CH80 ’85-95
Cycle: CR250M Elsinore ’75-76
Cycle: MR250 ’76, MT250 ’74-76
Cycle: XR200R, XR250R, XR400R ’00-03, XR600R, XL650R, XR650R
’00-07, VF500F, CB750 all ’69-E78
ATV: ATC90, ATC110 ’79-81 w/points
Cycle: CT90 ’77-79, CR125M ’73-78, CB175, SL175, CM185T/200T,
CRF230F, CM250, CMX250, CR250M ’73-74, CB350/360, CB350-4,
SL350, CB400, CMX450, CB500K/T, CB550SC, CBR600R (late model),
CB650SC, CB700SC
8324
11-9647
8466
8467
8868
11-1935
12-4138
12-7470
ATV: ATC125M, TRX125, ATC200, ATC200E/ES Big Red, ATC200X,
TRX200
Cycle: CB125/S, XL125/S, XL/XR185/S, XL200R, XR200/R
Cycle: XL250/350/500/600/650/R, XR250/350/500/ 600/R, GB/
FT500, VF500, VT500C/FT/600, NT/NX650, VF700, VFR/VF750C/F/S,
VT800/1100, VF1100C, V45, V65
Cycle: CRF450R ’02 (includes crankshaft and oil line cap)
Cycle: CB650, CB750 ’L78-83, CB900C, CB1000C (all 4 valve/4 cyl.
’78 and later)
Cycle: CB650SC
ATV: ATC250ES Big Red, ATC250SX, TRX250/X, TRX300/EX, ATC350X,
TRX350
Cycle: XR250R, XR600R, CB400T/450T, CM400/450, CX500/650,
GL500/650, VT600/750/800/1100, PC800
Fits some ATVs 35mmx1.5 R.H. external thread
Scooter: CN250 Helix
ATV: TRX450R ’04-10, TRX350 Rancher ’03-06
Cycle: CR250R ’78-80, CRF450R ’09-11, CRF450X ’09
HUSABERG
11-3346
Cycle: FE250/650
8204
11-3346
Cycle: 125/250cc 2 stroke ’97-00
ATV: 450/525 XC-ATV ’08
Cycle: 400 and 620cc models ’88 to current.
Cycle: Fits most electric start single cylinder 620, 625, 640, 660, 690
LC4E models
12-4138
KTM
KAWASAKI
8204
Cycle: KV75, KD80, KX80 all, KDX80, KE100, KH100, KM100, KS125,
KDX200/250 ’89-92, KX125/250/500 ’L89-92
8208
Cycle: KL250/600/650 KLR series, KLX250/300 (most) (See 8324 for
larger size.)
8209
ATV: KLT110, KLF185, KLT200, KLF220, KLT250, KSF250, KLF300
Cycle: KX125A ’78-81, EX250, KX250A ’78-80, KH400A, KX420A,
EN450, EX500, KX500 ’83-E89, KZ/ZX550GPz, ZX600, KZ750 GPz,
VN750, ZX750, Z1 900, KZ1000 all ’77-80, KZ/ZX1100GPz, KZ1300
8324
8467
11-1927
APPAREL
HARLEY-DAVIDSON
11-3343
8211
Application
KAWASAKI - cont’d.
ATV: KLF300C 4x4
ATV: KSF 250cc Mojave
ATV: KSF250/400
ATV: KFX450R ’08-10
Cycle: KLX450R ’08-09
ATV: Fits most 375, 400, 450, 500, 700cc 4-cycle models
UTV: 650 Prowler 4-cycle models
8209
Order No.
HELMETS
11-0721
11-1935
11-3343
12-7470
4246
11-3344
8206
8207
8208
NOTE: Because of year to year and mid-year changes by the O.E.M.s,
some models may take different pullers for the same year. Always
check sizes if possible!
Cycle: KL250/600/650 KLR series (See 8208 for smaller size.)
ATV: KLF185, KLF220, KLT250A ’82-83, KSF250, KLF300
Cycle: KZ200, EX250, KL250 ’78-83, KZ250, KZ440, EX500, KZ550,
ZX600, KZ650, KZ750, VN750, ZX750, KZ1000 ’79-up, KZ1100,
KZ1300
ATV: KLT160, KLF185, KLF220, KLF300C 4x4
Cycle: Fits 1 cyl., 4 stroke Enduros w/large flywheel
www.marshalldistributing.com
8209
8210
8869
EYE
PROTECTION
POLARIS
PROTECTIVE
GEAR
SUZUKI
Cycle: TM, TM250 TS250 ’76-81, TM400, Early DR 4-stroke models
11-0721
11-1935
12-7470
Cycle: GS1100E ’81-85, GS1150E chain
ATV: LT-F250, LT4WD, LT-F4WDX, LT300
Cycle: DR250/S, DR350/S, SP400, GSF400, GS1000G/GL, GS1100G/
GK shaft
Cycle: GN/GP/GS/GSX models (check thread size)
Cycle: GS/GSXR600/750/1000 ’84-94
ATV: LTF250 Ozark ’06-09
Cycle: GSXR600 ’01-02, GSXR750 ’00-02, GSXR1000/1300
Cycle: RM-Z450 ’07-08
11-3343
Cycle: 675 Daytona ’06-08
11-3343
11-2659
12-4138
8204
TRIUMPH
ATV: YT60, YFM80, YFM100, YFA125, YT125, YT175, YFM200, YFS200
Blaster, YTM200, YFM225, YTM225, YFZ350 Banshee
ATV: YFM350ER/FW/FX/X, YFZ350 Banshee YFM350X Warrior (NOTE:
Most Banshees may use no. 8204 with 30mm threads)
Cycle: YZ125 ’81-92 L.C. w/small rotor
Cycle: MX125, YZ125 ’74-80, MX250, RD250, YZ250 ’75-E88, R5 350,
MX360, YZ360 ’75
Cycle: TT225, RD250, 305, RS350, RD350, FZR400, RD400, XJ550,
8209
FJ600, FZ600, FZR600, XJ650, XJ700, FZR750, XJ750, XJ900,
FZR1000, FJ1100, FJ1200
11-0713 Cycle: XS650 twin cyl. ’70-83
ATV: YFM200DX, YFM225, YFM250 ’89, YFM600/660
8771
Cycle:BW200, BW350, XV535, TT600, XT600, XV700/750/920/1100
Virago, XVZ1300 Venture
12-4858 Cycle: WR250F ’03-09, ’11
12-4138 Cycle: WR450F ’04-09, ’11
2364
11-3346
8204
11-1927
11-1935
11-3344
12-4857
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
8206
8207
2363
EXHAUST
YAMAHA
Cycle: DT50, PW50, Riva ’83-91, YSR50, JT1 60, BW80, HT1,90/100,
AT1 125, CT1 175, IT200, DT1/250, IT250, WR250, YZ250/
WR ’L88-92, YZ 250F ’03-05 RZ350, TT350, RT1 360, DT400,
IT400/425/465/490, MX400, YZ400F/465/490, YZ426/450F ’03-05,
TT500, XT500
11-1935
TIRES/
WHEELS
MISCELLANEOUS
Scooter: Fits most 125-150cc ’60s-70s Vintage Vespa models and
many Bajaj Chetak models.
Scooter: Fits most Vespa models
Scooter: Removes clutch from most small frame Vespa models
Cycle: Bridgestone, Hodaka, KTM 4-cycle, Steens, Rickman, Tohatsu
Scooter: Fits many import models 125-150cc GY6 4-stroke series
engines
Cycle: Rotax 600cc
Fits 4 stroke Cycle models
Scooter: Fits many Asian and European models
Fits 2-cycle Mercury models ’70 & latest
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
749
SHOP
SHOP TOOLS
HELMETS
OIL DRAIN PLUG NUT/CLUTCH
NUT SPANNER TOOL
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
Heat treated 3/8” drive socket.
PINCER TOOL
Honda ATV: ATC90/110 all, ATC125M ’84-85.
Cycle: CL/CT/S/SL/ST90, CM91, CB/CL/SL100, XL100, CB/SL/TL125,
XL125, CA/CB/CL160, CA/CB/CD/CL/SL175, XL175, CA/CB/CL/CT200,
TL250, XL250, CB350/G, CL/SL350, XL350, CB/CL450, CB500T. Removes
special engine mount nut from CBR600RR ‘03-06.
No. 11-0722-E0701
4 stroke singles 90cc to 350cc
4 stroke twins 160cc to 500cc
Use to crimp vinyl or Tygon fuel line to fittings. O-clip pincer tool is available
to install and remove the O-clips.
No. 11-9398-E5621
$19.50
VALVE & ROCKER CLEARANCE
ADJUSTMENT TOOLS
$17.95
Universal 6 piece Valve Adjuster Kit
CHAINS &
SPROCKETS
CLUTCH SERVICE TOOL
DRIVE
BRAKES
Fits all driven clutches. Comes with splined or keyed hold down posts. Will
work on many drive clutches. Baked-on powder coat finish.
ENGINE
No. 15-0541-E5945
$79.95
AIR/FUEL
Honda All 4 cycle street and dirt including ATC models, using 9mm or
10mm adjustment nuts. Square and straight screw slotted adjusters.
Kawasaki 600/750/900 and 1000 Ninja Street Bikes.
Suzuki All 4 cycle ATV’s and motorcycles with 9mm or 10mm, screw
type and 3mm square tip valve/tappet adjusters.
Yamaha most 4-Cycle Motorcycles. Includes 8mm, 9mm, and 10mm
wrenches with square tip and straight slot adjusters.
Yamaha Most late model 4 cycle SR185/250, TT250, XT250, XS400.
All makes using 9mm or 10mm rocker adjuster nuts.
No. 8772-E5274
$78.95
BELT REMOVAL TOOL
CHEMICALS
SKI DOO
SPANNER FOR HONDA
ELECTRICAL
Used to open the secondary clutch to remove the drive belt. Made with alloy
steel and should be carried by all Ski Doo riders in case they need to replace
a drive belt. Replaces Ski Doo no. 529035501.
BATTERIES
No. 12-5831-E5940
$7.95
Replaces 20mm OEM #07716-0020100.
• Used to remove Honda OEM nut 90231-KY4-900.
• 4-Pin spanner made of heat-treated steel.
• Fits counter balancer nut on:
CRF450R ‘02-06, CRF450X ‘05.
CONTROLS
No. 12-8253-E0950
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
CLUTCH HOLDING TOOL
Made from medium carbon steel with hardened jaws. Hold clutch hubs,
flywheels, gears, sprockets, etc. Features 8mm spanner pins. Jaws open up
to 5” wide.
No. 12-7034-E0261
$24.95
FRAME &
BODY
SHOP
TANK and FENDER PROTECTOR
Protect your Motorcycle’s finish while performing maintenance or repairs.
Available in two sizes.
CLUTCH BUTTON TOOL
No. 10-1574-E5921
No. 10-1575-E5241
Used to service Polaris.
TRAILER
MERCHANDISING
$9.25
20mm 4-Pin
No. 11-9447-E5921
750
All numbers in BLUE are new for this year.
$19.95
Ultra Dealers Buy For Less - Ask Us About It
No. 10-1576-E5711
No. 10-1577-E5921
Tank sizes
Small Cruiser
Large Cruiser/Touring
Fender sizes
$20.95
22.95
$18.95
20.95
Narrow
Wide
2012
SHOP
SUSPENSION TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
SHOCK ADJUSTING TOOL
Spanner wrench used to adjust spring compression on many motorcycle and
ATV rear shocks including Polaris. Also fits FL/FX 4 speed ’58-86, XL ’58-74.
Replaces Harley no. 94700-65. Zinc plated.
SHOCK SPRING COMPRESSOR
• Lever action shock service tool that makes spring compressing easy while
one hand is free to remove spring retainer.
• Works on all snowmobile, motorcycle and ATV shocks that require a spring
compressor.
• Durable powder coat finish.
No. 15-0542-E5992
No. M66300-E5190
$15.28
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
$42.95
BRAKES
ENGINE
SHOCK ADJUSTER WRENCH
AIR/FUEL
Universal. Also works on Ohlin shocks on Yamaha’s.
No. 11-8493-E5930
$6.60
CHEMICALS
ELECTRICAL
BATTERIES
SHOCK SPRING TOOL
Used for removing springs from the suspension shock. Quick, simple, and
safe. Use for adjusting spring tension or removal and installation of spring.
No. 7620-E0533
CONTROLS
$49.95
UTV
ACCESS.
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOCK SPANNER PUNCH TOOL
This tool belongs in every rider’s tool box. Allows simple adjustment of spring
preload (to adjust ride height) without damaging shock or spring collars.
Hinged action allows use on a wide variety of preload collar sizes.
• Ideal tool for turning hard to reach lock ring and preload ring on rear
shocks.
• Angled brass tip gives secure bite and protects ring from damage.
• Heavy duty construction.
• Long shaft to reach hard to get at shocks.
No. 11-3164-E5990
No. 5135-E5221
SHOCK SPRING ADJUSTER TOOL
www.marshalldistributing.com
$16.50
All numbers in BLUE are new for this year
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$18.95
751
SHOP
TRAILER
MERCHANDISING
SHOP
SUSPENSION TOOLS
HELMETS
APPAREL
NITROGEN NEEDLE KIT
• Nitrogen needle is used to fill shocks with self-sealing rubber
EYE
valve (some Yamaha, Fox and Ohlins).
PROTECTION
• 22 gauge, 1” needle.
• Instructions included.
PROTECTIVE
• Made in the U.S.A.
GEAR
TIRES/
WHEELS
No. 11-3176-E0631
No. 12-9012-E0110
Kit
Replacement Needle
$21.25
1.75
DELUXE SUSPENSION BEARING SERVICE TOOL
EXHAUST
RydeFX’s rebuildable gas fill tool can easily be disassembled and reassembled for needle replacement using standard wrench sizes. Gas fill tool
comes standard with pressure gauge and 5 pack replacement needles.
Compatible with FOX™ and Arctic Cat ACT™ shocks and many others with
self sealing rubber valves.
• Designed for quick and easy removal and precise installation of suspension linkage and swing arm pivot bearing.
• Designed for use on 20 and 22mm ID bearings.
• Fits most off-road motorcycles and ATV.
• Includes blind bearing collet for removal of 20mm blind bearings.
• Kit includes blind bearing puller adapter, which can also be used as an
accessory with the Motion Pro Blind Bearing Remover set.
• Anodized aluminum mandrels reduce the possibility of damaging surfaces.
• Laser etched markings for easy size identification.
• Eliminates the need for a shop press.
• Protective blow-molded case for easy storage.
• A must have time saving tool for professional technicians, serious racers
and home mechanics.
No. FX390300-E59251
No. 3121-E04101
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
GAS SHOCK FILL TOOL KIT
$234.95
$155.95
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
FOLDING SAG SCALE
6061 T-6 aluminum construction. Rigid folding design fits in most tool boxes.
Direct reading scale (no subtracting required). Adjustable zero set point with
extended range. Will work on mini and full size motorcycles. Inch and metric
scale combination. Installs in rear axle. Can be used to check front or rear
sag. Extended length 28-1/4”, Folded length 15-3/4”.
No. 12-7083-E5932
• Easy way to keep your fork seals clean and debris free.
• Extracts dirt and debris trapped between fork seal and tube.
• Will work on conventional and up-side down forks.
LUGGAGE
RACKS &
ACCESS.
No. 12-8265-P0983
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
SEAL MATE
$36.95
T-STEM NUT WRENCH
•Each wrench is model specific and allows for loosening of the T-Stem nut
on late model motocross bikes and some sport bike applications without
removing the handlebars.
•The opposite spanner end allows for adjustment of the T- Stem bearings
on late model motocross bikes without removing the triple clamps.
No.
No.
No.
No.
12-7064-E0582
12-7065-E0582
12-7066-E0582
12-7067-E0582
752
Honda (32mm)
Kawasaki (32mm)
Suzuki (32mm)
Yamaha (30mm)
All numbers in BLUE are new for this year.
$43.95
43.95
43.95
43.95
Ultra Dealers Buy For Less - Ask Us About It
12/pkg
$59.95/pkg
FORK OIL LEVEL GAUGE
•For checking and adjusting the oil level on all conventional and inverted
forks.
•Adjustable ring will measure oil levels from 0-300mm in 0.5cm increments.
•Syringe has capacity of 60 ml.
•Can be used on bicycles equipped with front suspension.
No. 12-7047-E5241
$21.95
2012