Waste Oil Heaters MULTIPLE COST SAVINGS ENGINEERED FOR RELIABILITY (350 & 500 MBH)

®
Waste Oil Heaters
(350 & 500 MBH)
MULTIPLE COST SAVINGS
FACILITY HEATING COSTS
WASTE OIL DISPOSAL COSTS
ENGINEERED FOR RELIABILITY
HEAVY DUTY, LONG-LIFE DESIGN
AUTOMATIC, SELF-ADJUSTING FUEL DELIVERY
Why Reznor
“When the team at Cummins Automotive decided to heat their
premiere Mercedes-Benz service center with the waste oils they
generated, owner Brian Sinclair called the premiere name in
alternative heating ... REZNOR. Mike Reale of Atlanta Waste Oil
Heaters assisted Cummins in selecting the proper equipment,
providing expert installation and the annual cleaning of the
units. According to Brian, “The units now heat the entire facility,
consisting of the main garage, two smaller shops, and over
1,200 square feet of office space, with no problems.” Brian
confirms that “the heaters paid for themselves within a couple of
years” and that they “... continue to save Cummins Automotive
thousands of dollars every year in heating costs”.
Performance
Cummins Automotive Group, Alpharetta, GA.
In addition to enjoying the savings, Brian is also pleased that Cummins Automotive is conserving energy
and helping to protect the environment by recycling their own used waste oils instead of shipping them
off-site. So, how does Brian really feel about Reznor Waste Oil Heaters? In his own words,
“Quality, Performance, and Efficiency, what more could you ask for?” We couldn’t have said it better!
Innovation Recycling Waste Oil
into Free Heat
Since 1888, Reznor has set the standard in the design, engineering, manufacturing and marketing of
commercial and industrial gas and oil unit heating systems. It’s only natural that tens of thousands of
waste oil producers have turned to Reznor as their source for waste oil heaters as well. Burning waste
oils on-site for free heat is an excellent method of recycling fully endorsed by the US Federal EPA. The
benefits of using Reznor Waste Oil Heaters is not limited to free heat as the environmental concerns of
disposing of used oil are also eliminated.
Challenges
Waste oils vary by viscosity. Some heaters require daily monitoring and adjustment of manual controls
of oil and air pressure to compensate for the inevitable changes in fuel viscosity as different types of
waste oil are added to the fuel storage tank. A truly automatic, dependable and consistent oil supply to
the heater should not require constant attention.
Solutions
The engineering staff of Reznor developed a flow control pump that automatically delivers the correct
amount of oil and assures complete combustion without adjustments for viscosities ranging from #2 fuel
oil through SAE 50 wt. waste oil. This system completely eliminates manual user adjustments. There are
no manual controls to adjust the fuel flow rate. Other manufacturers have copied our system, but Reznor
was the first to perfect this system and include it as standard equipment on all production models.
The Reznor Waste Oil Heater sets new standards for reliable, trouble-free service.
Industry’s Best
Warranty
The Problem with Other Brands
The Reznor® System
Different flow rates cause a heater to over-fire or under-fire.
Flow rate held constant.
The Reznor Waste Oil Heater Combustion Chamber and Heat Exchanger carries the industry’s strongest
10-Year Warranty. Other manufacturers may provide fewer years coverage at 100% replacement value and
drastically reduce the coverage of the remaining pro-rated years of warranty. Warranties may appear similar
... read the fine print!
®
Features
Designed Right!
• Large, accessible service panels provide quick and easy access and
maintenance
• Flexible installation options allow ceiling support or units or use with
convenient Workbench Fuel Tank and Heater Stand.
• Designed specifically for burning waste oils
Built Right!
• Quality assurance in materials, fabrication and final product.
• Heavy-duty, long-life performance
• CSA Certified to UL Standards for operation and efficiency
Backed Right!
• Reznor Waste Oil Heaters are backed by the nation’s largest distribution
network, providing the best in local after-sales service support.
Flow Control Fuel
Pump
• The remote Flow Control Pump is standard equipment on every Reznor
Waste Oil Boiler, providing trouble free, reliable operation.
– Eliminates the continual flame adjustments required on other boilers.
– Automatically delivers precisely the correct amount of fuel,
regardless of viscosity, up to SAE 50 wt.
– Eliminates manual fuel and air adjustments
On-Board Air
Compressor
• The On-Board Air Compressor, supplied with all Reznor Waste Oil
Boilers, provides a self-sufficient, reliable source of clean air for
optimum operation.
– Eliminates need for your employees spending valuable time and
money adjusting the air pressure for the heater (trouble-free).
– Eliminates the use of expensive shop air compressors and issues
related to condensation in shop air lines.
Oil Pre-Heating
System
• The Reznor patented Oil Preheating System prepares the oil for proper
combustion.
– The Pre-Heater is located outside the burner for easy access.
– The heavy-duty aluminum cylinder isolates the heating element from
the oil.
– Precise, thermostat-controlled preheating of the oil helps eliminate
overheating and potential clogging of the oil.
– Reliable, cleaner and more dependable operation.
Thermally Balanced
Nozzle
• The Reznor Thermally-Balanced Nozzle design eliminates the problem
of nozzle after-drip.
– You get faster starts and clean cutoff for long life and smoother
operation.
Operating Hour
Meter
• The convenient Operating Hour Meter provides current and dependable
indication as to the total hours the burner has operated since initial
startup.
– Assists in assuring the unit is serviced at proper intervals, based on
actual hours of operation.
Flexible Installation
Options
• Any Reznor Waste Oil Heater can be suspended from the ceiling.
Most models can also be mounted on the optional C-UL Listed Work
Bench Fuel Tank, utilizing the optional Heater Stand (see next page).
– Reznor Waste Oil Heaters are fully assembled at the factory, test fired,
and shipped complete.
It’s only waste oil if you decide not to use it!
®
Features
The multi-purpose 250 gallon oil tank is for use where work
and storage spaces are at a premium. It serves a dual purpose:
Work Table and Oil Storage Tank. Furnished with an attractive
enamel finish, this C-UL Listed Tank has toe space to provide
comfortable operator working conditions. It is engineered
and constructed of 12 gauge carbon steel with a durable top
working surface. It has a preformed bracket for mounting
the remote Flow Control Fuel Pump and a Wide Throat Fill
Opening. When combined with the optional Heater Stand and a
Reznor Waste Oil Heater, you have the perfect Reznor Waste Oil
Recycling Center. This is pure convenience!
Optional
Workbench Fuel
Tank
BTU’s Per Hour Input
Technical Data
Model RA
Used Oil Fired
Space Heater
Model RAD
Used Oil Fired
Ductable Heater
350,000
41 3/8
72 3/4
45 1/4
685
5,000
115V
22
41 3/8
72 3/4
57 1/4
810
3,500
115V
29
8
2.5
Height (inches)
Width (inches)
Depth (inches)
Weight (lbs)
CFM
Electric (VAC)
Circuit Amps
Height (inches)
Width (inches)
Depth (inches)
Weight (lbs)
CFM
Electric (VAC)
Circuit Amps
Flue Size (inches)
Fuel Flow Rate (Gallons per Hour)
Model OT
Model
OT
Oil
Storage
Oil Storage Tank
Tank
Capacity
250 Gallons
500,000
34 3/8
75 5/8
61
925
6,200
230V
17
34 3/8
75 5/8
74
1,025
4,500
230V
20
10
3.57
Height
Width
Depth
Weight
35 inches
64 inches
30 inches
290 lbs
For More Information, Call
1-800-695-1901, Press 2
or visit
www.reznorheaters.com
®
© 2008 Thomas & Betts Corporation, All Rights Reserved.
0208 6M OG Form RZ-B-WOH (Version D)