How to configure your universal RCU for your TV or...

How to configure your universal RCU for your TV or DVD
1. Use the code for device from receiver manual
2. If you don´t have the device code, you can use Auto code search :
- Turn on device which you can controll /TV,DVD/
- Press at the same time device button on RCU (TV or DVD) and OK for 2 seconds
LED diode will blink 2 times
- Press arrow up button several times in a row until the device (TV,DVD) will turn off
We recommend do this part slowly
- After turn off the TV or DVD press OK button on RCU.
LED diode will blink 2 times
www.skytec-hd.eu