Baxi-SenerTec UK

TECHNICAL
S P E C I F I C AT I O N
Baxi-SenerTec UK
80,000
HOURS
DACHS MINI-CHP
CONTINUOUS
RUN TIME
PROVEN
RELIABLE
TECHNOLOGY
EASY
TO INSTALL
SenerTec have installed over
32,000 Dachs units throughout
Europe and have over 20
years’ experience in CHP
technologies. Baxi-SenerTec
UK are considered the leading
authority for mini-CHP in
the UK market.
Feature
Benefit
Installed close to where the electricity and heat
are to be used
Electricity isn’t lost during transportation
Easy to install
Very little down time means it is more convenient
for the end user
Design life of 80,000 hours of continuous running
Cost effective and reliable for its lifetime
Internal combustion engine driving a maintenance free
3-phase asynchronous electrical generator
Proven, long-lasting, reliable technology
750 litre buffer vessel for connecting 1-3 Dachs units
For improved running and increased efficiency
DachsPortal for remote monitoring of the system
So you can plan maintenance and ensure optimum
performance at all times
75O LITRE
BUFFER
VESSEL
Dachs Mini-CHP
Technical Data
Condenser – Key Data
Electrical output (3-phase)
5.5 kW
Additional heat output:
Thermal output without condenser
12.5 kW
– at 60ºC return temp.
0.8 kW
Thermal output with condenser (maximum)
15.5.kW
– at 50ºC return temp.
0.9 kW
Efficiency without condenser – gross (nett)
79% (88%)
– at 35ºC return temp.
2.3 kW
92% (102%)
– at 20ºC return temp.
3.0 kW
Max. efficiency with condenser – gross (nett)
Height (to top of casing)
1000 mm
Width (excl. MSR2 controller)
Depth
Height
1750 mm
720 mm
Width
400 mm
1060 mm
Depth
300 mm
Delivered weight
530 kg
Top clearance required
Standard safety valve
2.5 bar
Weight
Max. working pressure (4.5 bar SV reqd.)
5.0 bar
Max. hydraulic W.P.
Gas supply pressure
20 mbar
Natural gas input (22.8 kW)
2.13 m /h
3
Plant room air inlet
Noise emission (at 1 metre from casing)
150cm
Exhaust gas outlet (plastic)
Condensate drain
25 kg
5.0 bar
½”
DN80
25 mm
52-56 dBA
High limit safety ‘stat (STL)
110ºC
3,500 hrs
Heating inlet temp. (return)
10ºC – 70ºC
Service intervals
Designed service life
2
Heating F&R connections
1000 mm
80,000 hrs
Heating F&R connections (flexibles supplied)
1”
Gas connection (flexible supplied)
½”
Non-condensing exhaust (steel pipe not supplied)
1”
Condenser exhaust (plastic flue available)
DN80
Heating flow temperature
80ºC
Max. heating return temperature
(to allow CHP to operate)
70ºC
Electrical connections:
– 3-phase supply onto 20A type ‘C’ circuit breakers
2.5 mm
– equipotential bonding to main earth
10 mm
BMS control connections:
– Volt free enable
– 230 volt remote fault indication
– 230 volt remote service due indication
Modem connection – optional analogue, GSM or ethernet
SE Buffer Vessel – Key Data
Capacity
750 litres
Height (with insulation)
1920 mm
Diameter (excluding insulation)
750 mm
Diameter (with insulation)
950 mm
Insulation
100 mm
Weight (excluding insulation)
140 kg
Max. hydraulic W.P.
3.0 bar
Heating F&R connections to DACHS
1”
F&R connections to heating system
1½”
Heating flow temperature
80ºC
Max. heating return temp.
70ºC
DACHS MINI-CHP | T E C H N I C A L S P E C I F I C A T I O N
Space Requirements
3020
720
600
950
≥150
1060
600
2010
1050
≥150
350
600
Typical Hydraulic Arrangement
80oC
Multi-module Dachs c/w condensers
(base heat load)
SE buffer
750 litres
Boilers
(peak load)
<70oC
Heating
circuits
DACHS MINI-CHP | T E C H N I C A L S P E C I F I C A T I O N
Dachs Mini-CHP
Buffer Vessel - SE 750
0845 0701055
baxi-senertec.co.uk