REPLACEMENT SPARES FOR GAS TURBINES / POWER PLANTS

Transcription

REPLACEMENT SPARES FOR GAS TURBINES / POWER PLANTS
REPLACEMENT SPARES FOR GAS TURBINES / POWER PLANTS

Lock Plates & Stop seals

Locking Plates for Fuel Nozzles

Floating Ring of SSS Clutch Bearing of Turbine

Diverter Damper Seals of Gas Turbine for Diverting exhaust in Gas Turbine

Inner & Outer transition piece Seal assembly

Repairing of Voith make Torque converter

Shroud Blocks of frame IV gas turbines

HP Stem Governing Valve of Turbine

LP Stem Valve of Turbine

Cross fire tube

Stator Ring for Gas Turbine

Bolts, 12 Point Bolts, Bolts Hex Head, Bolts Shoulder

Studs for Power Plant

In-situ Machining of 235 dia. Spigots of 25MW Steam Turbine of Siemens make

In-situ Repairing of Rotor shaft of steam turbine by metal built up on Labyrinth Seal area

In-situ Repairing of Journal Bearing area of Rotor shaft of steam turbine

Various types of Nozzles for Thermal Power Plant

HP Steam line Metallic Gasket for ESV

Ash Discharge Pipe for CPP

Cooling Water Pump Shaft for Power Plant

CEP Throttle bush for Power Plant

Spares for Air Recirculation Valves of Thermal Power Plant

Dome Valve for Ash Conveying of Thermal Power Plant

Chromium Carbide coating on Fixing Sleeve for SWRO Booster Pump

Repairing of Silicon Carbide Slide Bearing for SWRO Booster Pump

Repairing of Bearing for Boiler Feed Pump

Repairing of Diffuser casing of Gas Turbine
Radhika Technologies Pvt. Ltd. (RTPL) is in no way endorsed by any original equipment manufacturer (OEM) identified in this website/EMail/Promotional material. All OEM names are trademarks or registered trademarks of each respective owners. All manufacturer’s name, part
numbers, symbols & description used in RTPL website/E-Mails/Promotional material are for cross reference & compatibility purpose only & it is not
implied that any part listed is the product of these original equipment manufacturer’s. GE/MJB/FLS/Thomassen/Burckhardt/Ingersoll Rand/Dresser
Rand or any other original equipment manufacturer is a registered trademark. It is not the intent of RTPL Website/E-Mail/promotional material to
mislead or confuse anyone to believe that is officially affiliated with any original equipment manufacture & Infringes upon the intellectual property
rights of any original equipment manufacturer.
REPLACEMENT SPARES FOR GAS TURBINES / POWER PLANTS
LOCK PLATE
LOCK PLATE
FUEL NOZZLE LOCK PLATE
FLOATING RING
DIVERTER DAMPER SEAL
DIVERTER DAMPER SEAL
INNER & OUTER
TRANSMISSION PIECE
SEAL
HYDRAULIC TORQUE
CONVERTER
SHROUD BLOCK
HP VALVE STEM
LP STEM VALVE
CROSS FIRE TUBE
STATOR RING
BI HEX BOLT INCONNEL
718
HARDWARE
STUD A-286
BI HEX NUT
MACHINING ON SPIGOT
GROOVES ON TURBINE
SHAFT
ROTOR SHAFT
METALLIC GASKET
ANGULAR FUEL NOZZLE
SEAL POT NOZZLE
COMBUSTION NOZZLE
SPRAY NOZZLE
ASH DISCHARGE PIPE
COOLING WATER PUMP
SHAFT
CEP THROTTLE BUSH
AIR RECIRCULATION
VALVE
DOME VALVE
SLIDE BEARING
FIXING SLEEVE
BFP BEARING
REPAIRING OF DIFFUSER
CASING
REPAIRING OF DIFFUSER
CASING
Radhika Technologies Pvt. Ltd. (RTPL) is in no way endorsed by any original equipment manufacturer (OEM) identified in this website/EMail/Promotional material. All OEM names are trademarks or registered trademarks of each respective owners. All manufacturer’s name, part
numbers, symbols & description used in RTPL website/E-Mails/Promotional material are for cross reference & compatibility purpose only & it is not
implied that any part listed is the product of these original equipment manufacturer’s. GE/MJB/FLS/Thomassen/Burckhardt/Ingersoll Rand/Dresser
Rand or any other original equipment manufacturer is a registered trademark. It is not the intent of RTPL Website/E-Mail/promotional material to
mislead or confuse anyone to believe that is officially affiliated with any original equipment manufacture & Infringes upon the intellectual property
rights of any original equipment manufacturer.