CoolPower - Micro20/35 The lighting solution for commercial environments HID Indoor

Transcription

CoolPower - Micro20/35 The lighting solution for commercial environments HID Indoor
HID Indoor
CoolPower - Micro20/35
Designed and manufactured in the UK
• Rapid Start
• Remote Mounting
• Operates CMH, CDM, CDM-Tm, HCI & Britespot
• Max lamp-ballast distance 15m
• Ignition voltage <2.5kV
• Microprocessor controlled
• Class II insulation
• ENEC approved (pending)
• Thermal protection
• 88% efficient
• Screw-less cable clamp assembly
• Fits through 58mm diameter cut out
• Compact and lightweight - only 155gms*
*20W and 35W models
Lamp compatability
Technical Specification
CMH / T / TC / Supermini / MR16, CDM / T / TC / Tm / R,
HCI / T / TC / Tf, Britespot
Part Number
Lamp Type
Micro20-240-C
Micro35-240-C
CMH/T/TC/MR16
Supermini CDM/T/TC/Tm
HCI/T/TC/Tf
CMH/T/TC/MR16
CDM/T/TC/Tm/R
HCIT/TC/BriteSpot
Lamp Power Rating
20W
Power consumption
24W
39W
43W
AC voltage range limit
200V - 265V AC
Mains frequency range
47 - 63Hz
152.4
>0.95
Power factor
<2.5kV PK
Ignition voltage
160Hz
Nominal lamp operating frequency
Lamp current waveform
Square Wave
Max. distance from lamp
(max. cable capacitance)
15m** 2nF
142.4
80C°
Max. case temperature Tc
85°C
-20°C to + 50°C
Ambient temperature Ta
Weight
155gms
160gms
Max no. of ballasts
100/45
50/22
per type C 16A/6A circuit breaker
31.50
HID Indoor
INDOOR
The lighting solution for
commercial environments
EN61347-2-12:2005, EN61000-3-2:2000, EN61000-33:2001, EN61547:2000, EN55015:2006
Safety standard Compliance
47.60
**Harvard HID ballasts employ a unique lamp striking method which allows the lamps to be mounted further away from the ballast than with conventional gear or any other type of electronic ballast. If you ensure the cable capacitance is within the limit specified, you will be able to achieve reliable starting at
extended distances. The cable must be 2 core and earthing to the lamp head/luminaire should be routed separately to the lamp wires. Consult factory for approved cable specification
www.HarvardEng.com
Harvard Engineering plc Tyler Close
Tel: +44 (0)113 383 1000
Data Sheet No.HIDI3 V1 RB
Normanton
Wakefield
Fax: +44 (0)113 383 1010
WF6 1RL
UK