PDF - Palmer Wahl Instrumentation Group

Transcription

Product Guide
America's First Manufacturer of Precision Industrial
Temperature and Pressure Instrumentation
www.palmerwahl.com
January 2015
ISO 9001:2008
CERTIFIED QUALITY
MANAGEMENT SYSTEM
Wahl’s Newest Heat Spy® Thermal Imagers
A. NEW! z150, a150 and z170, a170 Cameras
Ultra-High Sensitivity, Touch Screen, SpyLite, Picture-in-Picture and 2 Meter Drop Test
Frame Rate: "z" model: 60 Hz; "a" model: 9 Hz
Detector Resolution: Models z150/a150: 160 x 120; Models z170/a170: 384 x 288
Field of View: 25° x 19°
Spatial Resolution: Models z150/a150: 2.73 mrad; Models z170/a170: 1.37 mrad
Thermal Sensitivity @ 30°C: Models z150/a150: ≤ 0.05°C; Models z170/a170: ≤ 0.04°C
IR Digital Zoom: X 2 or X 4
Spectral Range: 8 to 14 μm
Visible Light Camera: 3.2 Megapixel CMOS Sensor, Dual LED Headlights
Thermal/Visible Light Image: Switch between Thermal, Visible Light, Picture-in-Picture 1, & SpyLite 2
LCD Display / Palettes: High Resolution 3.6" Color LCD Touch Screen, 640 x 480 / 11 Color Palettes
Measurement Range: User Switchable Low/High Temperature
-4° to 662°F (-20° to 350°C) Temperature Extension to 1202°F (650°C)
Measurement Accuracy: Greater of ± 2% of reading or ± 2°C, Instrument is not calibrated below 10°C
Measurement Correction: Auto / Manual
Measurement Mode: Spots, Areas, Lines, Isotherms, Delta T, Alarms (Multiple Audible, Visible)
Emissivity Correction: Adjustable from 0.01 to 1.00, Built-in Emissivity Table
Alarm: High and Low Temperature Audible and Visible Alarm; Isotherm Visible Alarm
Factory UPGRADE Optics: Wide Angle Lens: 0.5X for a 50° x 38° FOV
Telephoto Lens: 2X for 12.5° x 9.5° FOV
4X for 6.25° x 4.75° FOV
1
Picture-in-Picture - All temperatures shown thermally over visible image.
2
SpyLiteTM - Only temperatures over or under preset point shown thermally over visible image.
A
CAMERAS AT A GLANCE
WARRANTY
Series
170
150
70
50
30*
Frame Rate - z models**
60 Hz
60 Hz
30 Hz
30 Hz
30 Hz
Frame Rate - a models
9 Hz
9 Hz
9 Hz
9 Hz
9 Hz
Detector Resolution
384 x 288
160 x 120
384 x 288
160 x 120
160 x 120
Number of Pixels
110,592
19,200
110,592
19,200
19,200
Field of View
25° x 19°
25° x 19°
25° x 19°
17.5° x 13°
17.5° x 13°
1.9 mrad
Spatial Resolution***
1.37 mrad
2.73 mrad
1.37 mrad
1.9 mrad
Thermal Sensitivity @ 30°C
≤ 0.04
≤ 0.05
≤ 0.06
≤ 0.1
≤ 0.1
Visible Camera Megapixels
3.2
3.2
1.3
1.3
with Upgrade
LCD Display
Touch Screen
3.6" Color,
Touch
3.6" Color,
Touch
3.5" Color
No
3.5" Color
No
3.5" Color
No
Palettes
11
11
11
11
4
Lens Options
Wide Angle,
Telephoto
Wide Angle,
Telephoto
NA
Wide Angle,
Telephoto
Wide Angle,
Telephoto
High Temperature
User Switchable
User Switchable
User Switchable
User Upgrade
User Upgrade
6 Foot Drop Test
Yes
Yes
No
No
No
Spy-Care
Yes
Yes
Yes
Yes
with Upgrade
* Upgradeable to a 50 Series Full Feature model - Anytime, in the Field.
** Export Licensing fee may be required for your country, subject to US Government approval. No Export License required on 9Hz models.
*** 384 x 288 not directly convertible to 640 x 480 imager display. Image displayed as 320 x 240 image. Full 384 x 288 resolution image,
(1.09 mrad), downloads to computer.
FREE Lifetime Recalibration and Firmware Updates
FREE Competitor Camera Loaner Program
FREE ANNUAL Lifetime Standard Calibration of your Heat Spy Thermal Imager is included
with your purchase – a savings of up to $250 for each calibration. Contact us to obtain an
RMA number to return your unit to Wahl. We will calibrate it and install any new firmware
updates at no charge. Customer pays shipping both ways. *Free Recalibration of wide angle
or telephoto lenses is not included in this offer as there is an additional charge to ensure your
unit is properly calibrated to your specific lenses. Call for details regarding calibration of these
lenses.
Do you own a competitor's thermal imager that is in for repair? Repairs can be slow, leaving
you without an important tool for an extended period of time. Take advantage of Wahl’s FREE
Competitive Camera Loaner Program. Submit proof of your instrument’s return for repair (e.g.,
RMA paperwork) and Wahl will loan you a Heat Spy 50 Series Inspector for use for up to 30
days, FREE. USA ONLY. Customer pays shipping both ways. Quantities are limited, and based
on availability; subject to credit approval. Loaner Heat Spy must be secured by a company
credit card and purchase order.
FREE Thermography Training
FREE Emergency Replacement Service
Wahl offers free thermography training on a monthly basis at our Asheville, NC, USA facility.
This eight hour intensive course will train you to interpret thermal images. Training is available
to anyone, whether you own a Heat Spy or not. Presented by our T/IRT Level II Certified Trainers, this training is invaluable to anyone. Space is limited and available on a first come, first
serve basis. Customer pays own expenses. Visit our website for training dates.
Heat Spy Imager owners can rest assured that they will always have a thermal imaging camera
on hand. If your Heat Spy is in for repair – and you need it – we will send you a replacement
camera to use in the meantime – FREE. You never have to worry about being without your
most useful tool.*USA and Canada ONLY. Customer pays shipping both ways.
Specifications subject to change without notice
2
Call Toll Free 1-800-421-2853
B, C, & D
C. z50 and a50 Inspector
Designed for higher detail and report analysis, but at half the cost
Frame Rate: "z" model: 30 Hz; "a" model: 9 Hz Detector Resolution: 160 X 120
FREE Unlimited
Field of View: 17.5° x 13°
Spatial Resolution: 1.9 mrad
Phone Support
Thermal Sensitivity: 0.1°C @ 30°C
IR Digital Zoom: X 2
with all cameras!
Visible Light Camera: 1.3 Megapixel CMOS Sensor
Factory UPGRADE Optics: Wide Angle: (35° x 26° FOV); Telephoto: (8.75° x 6.5° FOV)
Thermal/Visible Light Image: Toggle between Thermal and Visible Light
LCD Display / Palettes: High Resolution 3.5" Color LCD Screen, 640 x 480
Measurement Range: -4° to 356°F (-20° to 180°C), User Upgrade to High Temperature: 212° to 1112°F (100° to 600°C)
Measurement Accuracy: Greater of ± 2% of reading or ± 2°C, Instrument is not calibrated below 10°C
Measurement Correction: Auto Correction of Microbolometer with Adjustable Time Interval or Push Button Manual
T Reflect: Manual Adjustment T Correct: Manual Adjustment
Emissivity Correction: Adjustable from 0.01 to 1.00, Built-in Emissivity Table
Lease the Wahl Heat Spy
Alarm: High Temperature Audible and Visible Alarm, Isotherm Visible Alarm
Zero down, Zero interest, over 2
D. z30 and a30 Detector - the only UPGRADEABLE CAMERA IN THE WORLD!
WARRANTY
years!
Investigate at
www.wahlheatspy.com
and see what you’ve been missing!
Introducing SPY-CARE
WAHL’S
NO-FAULT
WARRANTY
GUARANTEE
intentional or avoidable damage, such as disassembly. Intentional damage will void any warranty coverage.
Heat Spy® is a registered trademark of Wahl Instruments, Inc.
www.palmerwahl.com
Recorders Pressure Gauges Calibration
Designed for on the spot routine maintenance inspections USER UPGRADEABLE to a 50 Series Model
Frame Rate: "z" model: 30 Hz; "a" model: 9 Hz
Detector Resolution: 160 X 120
Field of View: 17.5° x 13°
IR Digital Zoom: X 2
Visible Light Camera: Available with Upgrade
Factory UPGRADE Optics: Wide Angle: (35° x 26° FOV);
TM
Telephoto: (8.75° x 6.5° FOV)
Thermal/Visible Light Image: Available with Upgrade
THE FIRST NO-FAULT THERMAL IMAGER
LCD Display: High Resolution 3.5" Color LCD Screen, 640 x 480
WARRANTY IN THE INDUSTRY
Display Color Palettes: 4 Color Palettes (11 with Upgrade)
Repaired or replaced free for two years,
Measurement Range: -4° to 356°F (-20° to 180°C),
for any reason!
User Upgrade to High Temperature: 212° to 1112°F (100° to 600°C)
Measurement Accuracy: Greater of ± 2% of reading or ± 2°C, Instrument
The Industry’s FIRST No-Fault Warranty now comes with each Heat Spy Thermal
not calibrated below 10°C
Imager sold*. SPY-CARETM is 2 year, NO-FAULT warranty protection. If any uninMeasurement Correction: Auto Correction with Adjustable Time Interval or
tentional and unavoidable damage occurs - Wahl will fix or replace your camera for
Push Button Manual
FREE. This protection is for the duration of the warranty period of two years from the
Measurement Mode: Spots, Delta T, High Temperature Alarm (Additional
original purchase date. Get unlimited repairs and one replacement camera (if camera
Functions with Upgrade
cannot be repaired) during the two year warranty period.
T Reflect: Manual Adjustment T Correct: Available with Upgrade
* Spy-CareTM covers units sold worldwide, and does not include shipping and handling charges. Customer
Emissivity Correction: Adjustable from 0.01 to 1.00, (Built-in Emissivity
pays shipping both ways. Customers outside the USA are required to pay export licensing fee, if applicable.
Table with Upgrade)
No export license required with 9 hertz models. Spy-CareTM covers only the camera, and does not cover any
Alarm: High Temperature Audible and Visible Alarm, (Isotherm Visible Alarm
included or additional accessories, including but not limited to batteries, lenses or SD cards. Spy-CareTM does
not cover the 30 Series camera which is covered by the standard warranty. Spy-CareTM does not cover any
with Upgrade)
Digi-Stem Hand Held Meters Sensors Temp-Plates Thermometers Thermowells
Designed for the highest detail, save and export thermal and digital images with easy report writing
Frame Rate: "z" model: 30 Hz; "a" model: 9 Hz Detector Resolution: 384 x 288
Field of View: 25° x 19°
IR Digital Zoom: X 2 or X 4
Visible Light Camera: 1.3 Megapixel CMOS Sensor
Thermal/Visible Light Image: Toggle between Thermal and Visible Light
LCD Display / Palettes: High Resolution 3.5" Color LCD Screen, 640 x 480 / 11 Color Palettes
Measurement Range: User Switchable Low/High Temperature
-4° to 356°F (-20° to 180°C) or 212° to 1112°F (100° to 600°C)
Measurement Accuracy: Greater of ± 2% of reading or ± 2°C, Instrument not calibrated below 10°C
Measurement Correction: Auto Correction with Adjustable Time Interval or Push Button Manual
T Reflect: Manual Adjustment T Correct: Manual Adjustment
Emissivity Correction: Adjustable from 0.01 to 1.00, Built-in Emissivity Table Alarm: High and Low Temperature Audible and Visible Alarm; Isotherm Visible Alarm
Infrared
B. NEW! z70 and a70 CHIEF Inspector
3
Heat-Spy® Infrared
Thermometers
C
Portable non-contact infrared thermometers
from the company that first introduced them!
A
G
B
F
A. DHS85XL
Type: Close Range
Accuracy: ± 2% of reading
Repeatability: ± 2°F (±1°C)
Display: LCD with Backlight
Display Resolution: 0.1°F (0.1°C)
Range: -4° to 619°F; (-20° to 326°C)
Distance to Spot: 8:1
Emissivity: Fixed at 0.95
Sighting: Laser Switchable
WARRANTY
B. DHS115XL or DHS115XEL
Type: Mid Temperature, Short Range
Accuracy: ± 5°F (± 3°C) from -25° to -4°F
± 3°F (± 2°C) from -4° to 212°F
Repeatability: ± 2°F (± 1°C)
Range: -25° to 999°F; (-32° to 535°C)
Emissivity: DHS115XL: Fixed
DHS115XEL: Adjustable 0.10 to 1.00
E. DHS235XEL (not pictured)
Type: Extra High Temp, Extra Long Range, Plus Range: -58° to 2732°F; (-50° to 1500°C)
± 3°F (± 2°C) from -4° to 212°F Spectral Range: 8 to 14 μm
± 2% above 212°F
Emissivity: Adjustable 0.10 to 1.00
Display: Dual Display LCD with Backlight
Range: -58° to 1832°F; (-50° to 1000°C)
F. DHS520B
C. DHS135XEL
Type: High Temperature, Long Range, Plus
± 3°F (± 2°C) from -4° to 212°F
± 2% above 212°F
Display: Dual Display LCD with Backlight D. DHS215XEL, USB & Type K Probe (not pictured)
Type: High Temperature, Extra Long Range
± 3°F (± 2°C) from -4° to 212°F ± 2% above 212°F
Display: Dual Display LCD with Backlight 4
Range: -58° to 1832°F; (-50° to 1000°C)
Type: High Precision, High Temperature
Range: 1022° to 5432°F (550° to 3000°C)
Accuracy: < 0.25% (K) of reading
Distance to Spot: 20:1, 4:1 with closeup lens
Repeatability: < 0.1% (K) of reading
Spectral Range: 1 μm with advance spectral filtering
Display: LCD
Emissivity Adj: 0.10 to 1.00 in 0.01 step graduations
Optical System: 9° Field of View
Sighting: Optical, Thru the Lens
Output: Bluetooth CommunicationsApprovals: CE Mark, IP54, NEMA 3
Options: Dark Glass Eye Protection Filter
G. DHS125XEL, Type K Probe
Type: Hybrid Infrared
Accuracy: ± 5°F (± 3°C) From -25° to -4°F
Range: -25° to 1400°F (-32° to 760°C)
K
WARRANTY
H
L
H. DHSA24 or DHSA24X
L. DHS35XT
Type: High Performance
Range: 0° to 1000°F, (-20° to 550°C)
Accuracy: ± 0.3% of Full Scale
Emissivity: Adjustable 0.2 - 1.0
Repeatability: ±1°F
Sighting: Enclosed Optical
Display: LED, “X” models LCD Display Resolution: 1°F or °C
Options: Laser Sighting, NIST Traceability
Range: 800° to 3200°F, (426° to 1760°C)
Spectral Range: 3.5 to 4.1 μm
Repeatability: ± 3°F
Sighting: Telescope
Display: LCD Display Resolution: 1°F or °C
Options: NIST Traceability
I. DHSA26 or DHSA26X (not pictured)
J. DHS28X (not pictured)
Display: LCD
Range: 32° to 2500°F, (0° to 1380°C)
Display Resolution: 1°F or °C
K. DHS29X or DHS29XT
Display: LCD
Range: 900° to 3200°F, (482° to 1760°C)
Spectral Range: 2.1 to 2.5 μm
Sighting: Enclosed Optical, “XT” models Telescopic
Display Resolution: 1°F or °C
www.palmerwahl.com
You know those cool
gun-style thermometers?
We invented
them...
In the 1960’s Wahl developed the
first portable non-contact infrared
thermometer. Featured in Popular
Science magazine in 1967, the
Wahl Heat Spy Infrareds have
been an industry standard, and
we’ve been improving on them
ever since. Today we offer a full
line of innovative and economical
infrareds to suit any application.
Range: 0° to 2000°F, (-20° to 1000°C)
Accuracy: ± 0.3% of Full Scale Spectral Range: 8 to 14 μm
Display: LED, “X” models LCD Display Resolution: 1°F or °C
Options: Laser Sighting, NIST Traceability
DHS24, DHS26, DHS28 , DHS29 & DHS35 Heat Spy Infrared
Thermometers are the most durable, advanced, easy to use
infrareds in the world! Featuring precision ground mirrors and
rare-earth germanium filters, the patented detector gives an
accuracy of better than ± 0.3% of full scale, with 1°F or °C
resolution.
Infrared
High Performance Infrareds
5
Heat-Spy® Infrared
Thermometers
High Temperature Infrareds
A. DHS1900
The most affordable High Temperature and Long
Distance hand held infrareds on the market
Type: Extra High Temperature for the Steel Industry
Range: 662° to 3452°F (350° to 1900°C)
Spectral Range: 1.6 μm
Repeatability: ± 5% of Reading
Resolution: 1°F or °C
Output: 4-20 mA; RS485; Mini USB port below the LCD
Calculation: MAX/MIN/AVG/Delta T calculations
Alarm: Includes Hi, Low Alarms
B
B. DHS3000 (same housing as DHS1900)
Type: Super High Temperature for the Aluminum Industry
Range: 1112° to 5432°F (600° to 3000°C)
Spectral Range: 1 μm
Output: 4-20 mA; RS485; Mini USB port below the LCD
Calculation: MAX/MIN/AVG/Delta T calculations
Alarm: Includes Hi, Low Alarms
Long Distance Infrared
C. HSA300
C
Type: Long Distance for Power Generation and Transmission Industry
Range: 0° to 572°F (-18° to 300°C)
Distance to Spot: 300:1; 2-inch measurement spot at 50 feet, its
telescopic sight allows precise positioning of the measurement spot
Measurement: Accurate at distances from 20 to 50 ft
Display: Peak temperature is displayed on the large main display easing
the ability to capture the hot spot; Current temperature is displayed on the
smaller secondary display
WARRANTY
THE LONGEST DISTANCE PORTABLE INFRARED IN THE
WORLD
Our new HSA300 is the world’s only 300:1 portable long distance thermometer,
enabling users to safely and accurately measure temperature beyond the range
of typical models. Developed to search out and measure small targets at a safe
distance for maintenance and repair before failure, the HSA300 is a perfect
trouble-shooter for high voltage connections, transformers, smoke stacks and
reactors. Precise target definition and instant response makes this an ideal
instrument with all the features preferred by maintenance engineers to easily
search out hot spots at a safe and convenient distance.
6
Heat Spy® Monitor
Fixed Infrared Pyrometers Specifically designed for easy maintenance and high
performance in harsh industrial environments, these sensors offer quick and easy integration
into process measurement and control systems for non-contact temperature measurement of
non-metallic surfaces or painted, coated or anodized metals.
A
A. M45 Series Fiber Optic Infrared Sensors
Ranges: 300° to 3200°C (572° to 5792°F)
Sighting: Laser or LED Sighting
Spectral Range: 1.6 μm, 1 μm, and Two Color 0.7 to 1.15 μm
Accuracy: Models offer ± 0.3% Rdg +1°C and ± 0.5% Rdg +1°C
Response Time: 2 mS and 20 mS
Distance to Spot: 40:1, 80:1,100:1, 180:1
B. M35 Series Heavy Duty Industrial Infrared Sensors
Ranges: 260° to 3200°C (500° to 5792°F)
Sighting: Optional Laser or Thru the Lens Sighting
Spectral Range: 1.6 μm, 1 μm, and Two Color 0.7 to 1.15 μm
Accuracy: Models offer ± 0.3% Rdg +1°C and ± 0.5% Rdg +1°C
Response Time: 2 mS and 20 mS
Distance to Spot: 50:1,100:1 or 200:1
C. M35 Series Heavy Duty Industrial Infrareds, Optional Optics
Range: 0° to 1000°C (32° to 1832°F)
Sighting: Laser Sighting
Accuracy: ± 1.5% of Reading or 3.6°F (2°C)
Response Time: 60 mS
D
D. M30 Series Compact Low Temperature Infrared Sensors
Ranges: 0° to 400°C (32° to 752°F)
Sighting: No Sighting
Accuracy: ± 2% Rdg or 1°C
Response Time: 300 mS
E. M20 Series Optical Head Infrared Sensors with Display
Ranges: 0° to 2500°C (32°F to 4532°F)
Sighting: LED or Optional Laser
Spectral Range: 1.6 μm, 1 μm, Two Color 0.7 to 1.15 μm, 8 to 14 μm
Accuracy: ± 0.3% Rdg +1°C, ± 0.5% Rdg +1°C, ± 1.5% Rdg or +2°C
Response Time: 10 mS, 20 mS, 60 mS
Distance to Spot: 2:1, 15:1, 20:1, 40:1, 80:1
F. M15 Series Infrared Sensors with Coaxial
Laser Sighting (not pictured)
WARRANTY
www.palmerwahl.com
Ranges: 0° to 1200°C (32°F to 2192°F)
Sighting: Coaxial Laser Sighting
Spectral Range: 1.6 μm, 8 to 14 μm
Accuracy: ± 1% of Full Span
Response Time: 500 mS, 200 mS
Distance to Spot: 30:1, 80:1
E
C
Infrared
B
7
Digi-Stem® Thermometers
DST600 Series Industrial RTD Meters and
Probes, designed for temperature critical
applications. Proudly made in the USA.
A. Digi-Stem Thermometer Systems with
Two Independent Class A 4-wire RTD’s
Model: DST610: Direct Access RTD Output
Range: -50° to 500°F (-45.5° to 260°C), User Selectable °F or °C
Meter Accuracy: ± 0.1°F/C, over 1 year period (@Tamb = 23°C ± 5°C), Self-Checking
Sensing Element: Class A, 4-wire RTD with Isolated Secondary 4 Wire RTD
Case Material: NEMA 4X 300 Series Stainless Housing
Probes: Probe ID to verify probe, Welded & Spring Loaded
Probe Connection: Dual Port Case with secondary RTD, wired to an internal terminal
block, access to the isolated second RTD via a 1/2" NPT fitting
Power: Battery Powered Local LCD Display with 1" Digits
Display Resolution: 0.1°F or °C
Accessories: DSTCAL Calibration Software, Battery Types, NIST Certifications,
and Mounting Equipment
Model: DST611: Direct Access RTD Output
Sensing Element: Class A, 4 wire RTD with Isolated Secondary 4 Wire RTD
Probe Connection: Dual port case with secondary RTD wired to
an internal terminal block. Turck 4 pin connector on second port for
watertight access
Power: Battery Powered Local LCD Display with 1" Digits
Model: DST620: 4-20 mA Transmitter Output
Sensing Element: Class A, 4 wire RTD with Isolated Secondary 4 Wire RTD
Probe Connection: Dual Port Case with Secondary RTD wired to internal
programmable 4-20 mA transmitter, accessed via a 1/2" NPT fitting
Power: Battery Powered LCD Display with 1" Digits
The Wahl DST600
offers the highest
precision temperature
measurement
technology with many
unique features making it the best
choice for your
processing needs.
A
Exclusive Quick Disconnect
option allows for removal of
probe and meter for calibration
without removing the
permanently installed cable.
Model: DST621: 4-20 mA Transmitter Output
Sensing Element: RTD with Isolated Secondary 4 Wire RTD
Probe Connection: Dual ports with a secondary RTD wired to internal programmable
4-20 mA transmitter. Turck 4 pin connector on second port for watertight access
8
B
NOTE ABOUT PURCHASING: Digi-Stem Probes are custom
built to your specifications and must be ordered separately
from the meter to compose a complete system.
Unique Features of the DST600
Always Accurate Self-checking Technology
The Wahl DST600 meets and exceeds the FDA rules with patent-pending, selfchecking technology which continuously verifies the accuracy of the electronics
and indicates any out-of-tolerance conditions. This assures that its accuracy
and ability to function properly during processing are not compromised.
Eliminates Electric Power Connections
• Sample/Display Rate - Factory default at 2/second. Adjustable
from .25 seconds to 10 seconds in .25 second intervals. Slower update rates
extend battery life up to 10 years.
Unique Probe ID - Prevents the use of unauthorized and uncalibrated probes,
and verifies that only the authorized probe is connected to the meter. If an
unauthorized probe is connected, the meter will indicate the need to perform the
probe authorization and probe calibration functions. Probe ID is available on
Adjustable Angle, Rigid, and Remote probes up to 25-meter cable lengths.
No other thermometer has these safety features!
DSTCAL Calibration Software - This exclusive software allows setting of
configuration parameters and allows the following calibrations:
• Meter Calibration - uses fixed resistances to calibrate the
resistance measurement electronics.
• System Calibration - used to calibrate a sensor to a meter using
a standard ice bath.
Easy Installation and Recalibration with Exclusive Quick Disconnect
Connector Option on Remote Cables (pictured at left)
Optional Quick Disconnect for both probe and meter connections offers
convenient calibration for the user. This industry leading, time saving capability,
allows the probe and the meter to be removed and taken to the calibration lab
and calibrated as a system - without removing the installed cable.
NOTE ABOUT PURCHASING: Digi-Stem
Probes are custom built to your specifications and must be ordered separately from
the meter to compose a complete system.
WARRANTY
www.palmerwahl.com
In 2006 when the FDA proposed a rule change to allow for the use
of digital thermometers in place of traditional mercury-in-glass thermometers during the canning process, Wahl began development of a
reliable digital reference thermometer.
A near-by food processor, who has been canning their world-famous
beans in locations across the USA for over 100 years, served as the
beta-test site for this thermometer. With their focus on producing a
large quantity of high quality product, they required a reliable thermometer compliant with both FDA and USDA rules. By opening their
facilities to us, they were a valuable participant that enabled Wahl to
develop a highly reliable digital 4-wire RTD thermometer.
The Wahl DST600 Digi-Stem Thermometer not only meets, but exceeds FDA and USDA rules. It incorporates self-checking technology to continuously verify accuracy and indicate any out-of-tolerance
conditions. It also has a unique security feature which verifies that
only an authorized probe is connected to the meter, and that the probe
and meter are calibrated together to work as a system. These features
guarantee an unrivaled accurate, reliable and secure system. This extra
level of assurance provides peace of mind during processing so that
our customer continues to produce a high quality – and tasty! – can
of beans.
Digi-Stem® is a registered trademark of Wahl Instruments, Inc.
Unique Probe R0 - Matches sensor to meter with Programmable “R0” for
precise temperature readings. This exclusive compensation feature utilizes a
programmable R0 calibration coefficient for increased accuracy. In conjunction
with the Probe ID feature, it assures an accurate and secure system.
DIGI-STEM THERMOMETERS HELP MAKE
A TASTY CAN OF BEANS!
Model: DST600 for Retorts
Meter Accuracy: Greater of ± 0.3°F/0.2°C or ± 0.1% of reading, over 1
year period (@ Tamb = 23°C ± 5°C), Self-Checking
Sensing Element: Class A 4 wire RTD
Probes: 1-1⁄4"-18 Swivel Nut Fitting with 1/4" Diameter Stem, 1-1⁄4"-18
Swivel Nut Fitting & Tapered Bulb, Sanitary, Welded and Spring Loaded
Probe Connection: Rigid, Remote, Adjustable Angle
Power/Update Rate: Battery Powered / 2 second standard, adjustable
in .25 second intervals from .25 to 10 seconds
Display Resolution: 0.1°F or °C with 1" Digits
Approvals: Meets FDA Specifications, USDA Approved Equipment, CE
Mark, 3A Mark
Accessories: DSTCAL Calibration Software, Battery Type, NIST
Certifications, and Remote Bracket Mounting
Infrared
B. Digi-Stem RTD Thermometer Systems for
Food Processing - with Self-Checking Technology
9
Digi-Stem® Thermometers
Optional FM, Max-Min, Transmitter, and multiple
Thermocouples Systems
Digi-Stem® Features
• Selectable Stems, Rigid, All Angle and Remote
• Large 1" LCD Continuous Display
• Easy to Read from Over 20 Ft.
• Battery Operated
• Meter Accuracies from ± 0.3°F (± 0.2°C)
• Factory Calibration Lot Traceable to NIST (Optional)
• Direct Replacement for Bimetal, Mercury-in-Glass,
Bulb & Capillary Thermometers
• Temperature Ranges from -328° to 1472°F (-200° to 800°C)
• Easy to Install
• NEMA-4X Stainless Housing
• Hose-Down Proof, Vibration Tolerant
• Optional RTD or Thermocouple Output
• 4-20 mA Transmitter with Local Display, Loop Power
A1
A. Digi-Stem RTD Thermometers with optional FM or Min-Max
A1 Model: DST500 Meter A2 Model: DST500-FM Meter with Factory Mutual Approval
A3 Model: DST550 Min-Max Recording Meter (not pictured)
Range: -328° to 1472°F (-200° to 800°C)
Meter Accuracy: ± 0.1°F or °C, over 1 year period (@Tamb = 23°C ± 5°C)
System Accuracy: DST500-FM: from ± 0.3°F
A2
Sensing Element: Class A, 4 Wire RTD
Probes: IP68 Remote Cable Connection System; 1/4", 3/8", or 1/2" Diameter,
Tapered Bulb, Sanitary, Spring Loaded, Welded
Probe Connection: Rigid, Adjustable Angle, or Remote
Power: Battery Powered Display; DST500-FM: when used with the Wahl DSA3060 (Tadiran model
TL-2200) battery, carries hazardous location approval for US and Canada
Display Resolution: 0.1°F or °C. 1°F above 999.9°F
Accessories: DSTCAL Calibration Software, Battery Types, NIST Certifications, and Remote Mounting Bracket
Approvals: CE Approval on DST500 only
DST500-FM: Intrinsically Safe IS/CL I, II, III / DIV 1 / GP ABCDEFG / T4A Ta = 70°C; Type 4X
CL I, II, III / DIV 2 / GP ABCDEFG / T4A Ta = 70°C; Type 4X
C
US
B. Digi-Stem RTD Thermometer & Transmitter System
Model: DSX500 Meter with 4-20 mA Transmitter
Range: -328° to 1472°F (-200° to 800°C)
Meter Accuracy: ± 0.1°F or °C, over 1 year period (@Tamb = 23°C ± 5°C)
Sensing Element: Class A, 4 Wire RTD
Probes: IP68 Remote Cable Connection System; 1/4", 3/8", or 1/2" Diameter, Tapered Bulb, Sanitary, Spring Loaded, Welded
Power: 24 VDC Loop Powered Local Display and 4-20 mA Transmitter
Display Resolution: 0.1°F or °C. 1°F above 999.9°F
Accessories: DSTCAL Calibration Software, Battery Types, NIST Certifications, and Remote Mounting Bracket
B
10
Infrared
DST400 Thermocouple Systems
for maximum flexibility, speed of response, extreme high and
low temperature and ability to switch thermocouple type
C. Digi-Stem Thermometer Systems with Five Thermocouple Inputs
Model: DST400K
Range: -40° to 2500°F (-40° to 1371°C)
Model: DST400J
Range: -40° to 2192°F (-40° to 1200°C)
Model: DST400T
Range: -40° to 752°F (-40° to 400°C)
Model: DST400E
Range: -40° to 1832°F (-40° to 1000°C)
Model: DST400S
Range: -32° to 3200°F (0° to 1760°C)
Meter Accuracy: K, J, E Probes: < 1000 = ± 0.5°F, ± 0.3°C; > 1000 = ± 2 °F, ± 1°C;
T Probe: ± 0.5°F, ± 0.3°C; S Probe: Full Range = ± 2°F, ± 2°C
Sensing Element: 5 user specified thermocouple input types K, J, T, E, or S
Probes: 304 or 316 Stainless Steel; 1/4", 3/8", and 1/2" Diameter, Tapered Bulb,
Sanitary, Spring Loaded, Welded
Display Resolution: < 1000 = 0.1° ; > 1000 = 1°C
C
Select any or the 5 factory programmed Thermocouple inputs at time of purchase,
and change to any of the other 4 inputs after purchase with our easy to use
optional DSTCAL software.
D. Digi-Stem Thermocouple Thermometer & Transmitter System
D
NOTE ABOUT PURCHASING: Digi-Stem Probes are custom built to your specifications
and must be ordered separately from the meter to compose a complete system.
Our variety of rigid, all angle
stems and remote interface
connections accommodate most
installations.
WARRANTY
Digi-Stem® is a registered trademark of Wahl Instruments, Inc.
www.palmerwahl.com
Model: DSXA300 Meter with 4-20 mA Transmitters
Range: 0.0° to 300°F (-18° to 150°C)
Meter Accuracy: ± 1.1°F: 0° to 150°F; ± 2°F: 150° to 300°F; ± 0.7°C: -18° to 150°C
Sensing Element: Type K Thermocouple
Probes: Immersion, Sanitary, Spring Loaded, Brazed, Welded
Probe Connection: Remote
Power: Loop Powered Local Display and 4-20 mA Transmitters
Display Resolution: 0.1°F: 0° to 150°F; 1°: 150° to 300°F; 0.1°C
Accessories: 24 VDC Loop Power: 12/42 V DC min/max; Loop Output: 4-20 mA; Fixed
zero and span NIST, Range Expansion Options, Secondary Element Options, Cables,
Batteries, Certifications, and Remote Mounting Brackets also available
11
Heat Prober® Hand Held
RTD, TC & Thermistor Meters
High performance portable temperature
measurement systems
B
Wahl invented the portable
Platinum RTD Thermometer
It provides exceptional accuracy and long term stability in a versatile meter system with interchangeable probes. Simply plug in and
play! Verify the calibration of the meter before each use, or check
multiple meters without the need to return each meter for NIST with
the CAL392HP (Figure F). The simplest and easiest to use hand
held meter and probe system on the market.
A
A. 392A High Performance Platinum RTD System
WARRANTY
Model: 392AHPF
Model: 392AHPC
Model: 392AHPD Dual Scale Switchable
Range: -290° to 1450°F Range: -180° to 788°C
Range: -290° to 1450°F (-180° to 788°C)
Sensing Element: RTD
Probe: Interchangeable probes
Probe Connection: Interchangeable, 4 wire plug in connection HP Series Probes
Display: Bright 0.33" high visibility LED display, “X” Models - LCD
Display Resolution: 0.1° below 375°F (190°C); Auto Ranges to 1° above 375°F (190°C)
Meter Accuracy: ± 0.1°F/C ± 1 digit at 32°F (0°C) at 77°F
Battery: 6.25 V rechargeable NiCad Battery
B. 392A Series Platinum RTD Thermometer Systems
C
Model: 392AMF
Model: 392AMC
Model: 392AMD Dual Scale Switchable
Range: -60° to 752°F
Range: -51.1° to 400°C Range: -60° to 752°F (51.1° to 400°C)
Probe: Interchangeable platinum probes
Probe Connection: 3 wire plug in connection Probes
Display: 392AM: Bright 0.33" high visibility LED display, 392AMX, 392AVX: 0.4" Red LCD display
Display Resolution: 0.1° below 375°F (190°C); Auto Ranges to 1° above 375°F (190°C)
Meter Accuracy: ± 0.1°F/C ± 1 digit at 32°F (0°C) at 77°F
Battery: 6.25 V rechargeable Ni Cad Battery, 392AVX: 9V Alkaline Battery
C. Thermocouple Meters
Model: 2500
Model: 1370
Model: TCMR-K °F/°C Switchable
Range: -100° to 2500°F Range: -70° to 1370°C
Range: -100° to 2500°F (-70° to 1370°C)
Sensing Element: Type K Thermocouple, Type S available
Display: LED, “X” Models - LCD
Probe: All Type K probes
Probe Connection: ANSI Mini-Connector
D
Display Resolution: 1°
Meter Accuracy: ± 0.2%, ± 1 digit
Battery: 6.25 V rechargeable Ni Cad
Battery. MV Models: 9V battery
ALSO AVAILABLE
Immersion Probes
General Purpose, HVAC Test
Material: Stainless Steel Sheath, Delrin guard on HVAC Air-Gas Test Probe
Penetration Probes
Heavy Duty Piercing Probe, Needle Tip, Fine Tip, Sharp Tip, Hypodermic
Surface Probes
Straight or 45° Spring Articulated
Plug-Type Probes
Threaded Plug-Type
Material: 7/19" Hex Nut threaded to 3/8" - 24 NF with 4 ft. over braided cable
D. Thermistor Meters
Model: 700MC or 700MF
Range: -1.00° to 60.99°C or 30.20° to 141.78°F
Sensing Element: Thermistor
Probe: Interchangeable Thermistor Probes
Probe Connection: 1/4" Stereo Jack
Display: LED
Display Resolution: .01°C / °F
Meter Accuracy: ± 0.03°C (.06°F)
System Accuracy: ± 0.15°C (0.27°F) when meter and probe are calibrated separately or
± 0.04°C (0.7°F) when meter and probe are calibrated together
Ordering Note: A Heat-Prober “system” consists of a meter and a sensing probe.
The Heat-Prober meter serves to accurately interpret the temperature sensed by
the probe, provide digital display, and allow measurement options. The meter also
contains the power (battery) to allow complete system portability.
12
E. TM Pocket Thermometers
WARRANTY
F. 5-Point NIST Traceable RTD Calibrators
Assure laboratory accuracy in the field when used
with 392A meters
NIST Certificate Included
High Temperature
Model: CAL392HP-HT (for High Temperature Calibrator for 392AHP only)
Model: CAL392-HT (for High Temperature Calibrator 392A)
Calibration Points: -58°F, 32°F, 212°F, 284°F, 752°F (-50°C, 0°C, 100°C, 140°C, 400°C)
Low Temperature
Model: CAL392HP-LT (for Low Temperature Calibrator for 392AHP only, Ice Point to Boil)
Model: CAL392-LT (for Low Temperature Calibrator 392A)
Calibration Points: 32°F, 68°F, 104°F, 140°F, 212°F (0°C, 20°C, 40°C, 60°C, 100°C)
G, H
G. Type S Dipstick Thermometer Systems, Ferrous Metal
to 3200°F / 1770°C
Use in molten iron and steel alloys with or without slag for measuring melts in ladles
and melt-pots. Stable readings are obtained in 6-8 seconds. Dipstick comes with one
expendable tip. Spare tips are sold separately.
TC840-1F or C - 48" length dipstick with 45° angle bend
TC840-2F or C - 60" length dipstick with 45° angle bend
TC840-3F or C - 60" straight dipstick meter with RTC832 expendable tip
Expendable Type S Tips
RTC832 - Expendable Type S 1-3/4" quartz
covered (exposed) tip for shallow dips.
RTC832S - Expendable Type S 1-3/4" quartz
covered (exposed) tip with 12" cardboard
sleeve for deeper dips.
H. Type K Dipstick Thermometer Systems, Nonferrous Metal
to 2500°F / 1370°C
I. TM410 Thermocouple Food Service Thermometer
Range: -40° to 1999°F (-40° to 1092°C) Switchable
Meter Accuracy: ± 1.0°F (± 0.5°C) in an operating range of 32° to 200°F (0° to 93°C)
• Meets and exceeds FDA Requirements (Food Code requires ± 2°F)
• Optional probes plug into the top of TM410 for easy single-handed use (see pg 17 #Q
for probe information)
• Optional TCL329K Extension Handle for extended reach (pictured at left)
• Built in pocket/belt clip on back of unit
• Reduced dirt-harboring crevices for easy cleaning
• 3 - AAA Batteries
Heat Prober® is a registered trademark of Wahl Instruments, Inc.
www.palmerwahl.com
I
Rugged reusable chrome-tip with Type K thermocouple measures nonferrous metals such
as brass, bronze and aluminum, and enclosures such as furnaces, stacks, and ovens. It
can be used for hundreds of dips, depending on composition of process materials.
TC850-1F or C - 55" length dipstick with right angle
TC850-2F or C - 72" length dipstick with right angle
F
Infrared
Model: TM602
Model: TM612 (pictured) Model: TM630
Sensing Element: Thermocouple
Sensing Element: TC and RTD
Probe Connection: 14 Thermocouples and 12 RTD types
Probe Connection: 4 pin round connector or 4 banana plugs, TM602 - mini T/C uncompensated connector
Probes: Thermocouple Types: K, T, J, E, R, S, B, U, L, C, N. RTD: Resistive Probes;
Pt 50, Pt 100, Pt 200, Pt 500, Pt 1000, Ni 100, Ni 120, Ni 1000, Cu 50
Display: Graphical LCD with adjustable contrast and backlight. Display in °C, °F, mV, and Ohm
Display Resolution: Programmable by user; Up to 1mΩ or 1μV
E
Meter Accuracy: 0.02% of Reading
Accessories: Rechargeable Batteries and Battery Charger, NIST Calibration Certificate, and Carrying Case
13
Heat Prober® Platinum
RTD Probes
392A Series Platinum RTD Probes
Platinum RTD Probes are recognized worldwide by metrology laboratories as the most reliable standard in
temperature measurement. Our platinum sensors are housed in thin wall stainless steel shanks with low
mass tips that don’t compete with the measured object. Wahl probes have fast response, and provide longterm stability, repeatability, and an accuracy of ±0.2°F at ice point, ±0.5% of reading thereafter.
The most reliable standard for measuring and
comparing temperature information.
Every probe is engineered to do a specific job in measuring surfaces, liquids, semi-solids or gasses. Each
probe has a high quality, heat resistant Delrin® handle, a coiled 5-foot cord and a snap-in connector that
mates it solidly to our thermometer. Every probe is calibrated at two or three temperature points on NIST
traceable secondary standards and tagged “Wahl Test Certified” with calibration data. You can order a NIST
certificate with test data for meters and probes.
Wahl patented the First thermocouple surface probe in 1982 Our expertise enables us to design
and build an interchangeable meter/probe system allowing for any number of probes for specific applications.
A. 112 Fine-Tip Penetration Probe for foods and other soft substances
B. 114 Heavy-Duty Piercing Probe for plastic melts, rubber, asphalt,
A
B
C
frozen foods, or other semi-solids
D
C. 121 Spring Articulated Straight Surface Probe for molds, dies,
platens, electronics, machine housings and all other surfaces
D. 123U Right Angle Fast Surface Probe for reaching into die and
mold cavities, electronic chassis, or other restricted areas
E. RTD Sanitary Probe Single 4 wire or Dual 3 wire RTD Sensors,
Available with 1.5", 2", 2.5", or 3" sanitary flange
F. 124 Rigid Shank Fast Surface Probe for rugged applications
G. 145 45° Spring Articulated Surface Probe for molds, dies, platens,
electronics, and all other surfaces
H. 155 Bolt-on Surface Probe for permanent installation, used to monitor
engine or reactor surface temperatures
I. 172 Self-Adhesive Surface Probe for monitoring environmental tests,
curing cycles, and oven processing
J. 201 General Purpose Immersion Probe (not pictured) for liquids,
E
foods, candy, granular materials, and semi-solids
K. 202 Sensitive Immersion Probe for use in all liquids and semi-solids
L. 392AHP Probe Connector 4 pin connector for 3-wire RTD and balancing
resistor circuit
F
14
G
H
I
Note: Platinum RTD Probes may be used with the TM612 and TM630 Meters
shown on pg 13. Add “TM” to end of model number when ordering.
K
L
M3
M3
M4
M2
Wahl Platinum RTD probes are
interchangeable without Recalibration!
Only Wahl offers an interchangeable probe system that assures
consistent accuracy and 0.2°F repeatability without meter
recalibration.
M. Specialty Probes
Wahl offers a variety of probes for immersion in liquids and semi-fluids, insertion,
penetration, air and gas calibration, surface measurements, and other applications
M1. 292RTD Sealed Immersion Probe for installation in thermowells
M2. TC881 Spring-Loaded Thermowell Probe
M3. TC882 Spring-Loaded Type K TC Bayonet Probe
M4. TC886 Magnetic Surface TC Probe
N. 203 Teflon®-Coated Immersion Probe (not pictured) for use where
corrosive solutions and possible metallic contamination are a concern
O. 204 12" Long-Reach Immersion Probe (not pictured) for baths, vats,
kettles and other deep vessels
P. 204CT Paddle Probe for crystallization and fluid temperatures while agitating
liquids
Q. 205 Heavy-Duty Immersion Probe for solder baths, liquids, granular
materials, and gas
T
R. 205SH Heavy-Duty Shielded Immersion Probe shield protects the
S
tip from the shock of hitting vat or container walls, and from mixer blades
S. 212 Fully Immersible Probe with no handle for plating baths, dipping
solutions, brewing vats, storage vats, tanks, rivers and streams
T. 302 Air/Gas Probe with perforated sensor shield to protect open element
sensor from particulates and direct surface contact, used in industrial application such
as ovens, stacks and ducts
tube for fast response HVAC applications
R
Q
P
Heat Prober® is a registered trademark of
Wahl Instruments, Inc.
www.palmerwahl.com
U. 305 Miniature Air/Gas Probe (not pictured) perforated steel
M1
If you have a unique requirement for temperature probes, Wahl
will custom-engineer and build them for you. We have produced
more than 2000 custom designs. It’s simple: send us a sketch
or digital drawing of dimensional requirements, environmental
conditions, temperature limits, accuracy, output (TC or RTD)
and quantity. We will promptly return an engineered design and
price quotation. In addition to the thermocouple and platinumRTD probes shown throughout, Wahl offers off-the-shelf
probes for immersion in liquids and semi-fluids, insertion,
penetration, air and gas calibration, surface measurements,
and other applications.
Infrared
Special Request & Build to Order Probes
with Wahl’s Custom Engineering Service
15
Heat Prober® Thermocouple
Probes
Type K Thermocouple Probes
Wahl thermocouple probes are designed for the fastest response possible depending upon use.
Each starts with the thermocouple junction, precision welded for virtually instant response. Then a
stainless steel sheath is created with a thin wall for fast measurements or a thicker wall for heavy
duty applications. Surface probe tips are Wahl-engineered to provide optimum contact with the
least thermal load.
Thermocouple and Thermistor Sensors
A
B
C
A. TC801 Immersion Probe for fluids, corrosive mixtures, solder baths and viscous materials
B. TC803 Electronics Tip Probe for electronic and biological applications
C. TC805 Air/Gas Probe for fast response and good accuracy in high temperature radiation
backgrounds
D. TC809H Heavy-Duty Surface Probe System for surface temperature measurement of
ingots, furnaces, kilns, molds and platens, use replaceable tips E, F, and G.
E. TC821H Heavy Duty Surface Probe Tip 45° tip
F. TC821R Heavy Duty Surface Probe Tip 90° tip
G. TC821S Heavy Duty Surface Probe Tip straight tip
H. TC812K Magnetic Surface Probe with 3 lb. pull magnet attaches easily to ferrous surfaces
I. TC813 Bolt-On Surface Probe for continuous monitoring, withstands hazardous environments
J. TC814 Hypodermic Probe for minimal disruption when inserted into semi-solids
K. TC817 Heavy-Duty Piercing Probe for plastic melts, rubber, asphalt, frozen foods, or other
semi-solids
L. TC861 Pencil-Type Electronic Tip Probe for electronic component testing
Thermocouple portable temperature sensors have the
advantage over other types due to their fast response, wide
temperature range, and ruggedness. The sensors are small in
size, versatile and convenient to use. An added advantage of
thermocouple use is derived from their wide-spread availability
and meter/probe compatibility.
M. TC867 Soldering Iron Tester Probe (not pictured) instant checking of iron for critical
Thermistor sensors offer excellent accuracy and
long-term stability, but over a relatively narrow
temperature range. Thermistors are generally used
to measure moderate temperatures in applications
demanding greater accuracy than thermocouples,
but less demanding than Platinum RTD Thermometer
Systems.
P. TC873 Right Angle Surface Probe flexible bands for rolls, curved surfaces, platens, and,
operations
N. TC869 45° Spring Articulated Surface Probe provides certain surface contact for
platens, hot plates, molds
O. TC871 Threaded Plug-Type Probe for shell cavities and machinery walls
molds
Look for the “Wahl Tested
Certified” calibration tag on
every probe
H
E
F
I
J
K
L
N
O
D
G
16
P
Q. Economy Type K Thermocouple Direct Connect to Meter Probes
Infrared
TP-100 Needle-Tip Penetration Probe 4" shank, direct connect to meter
TP-101 Fine-Tip Penetration Probe 4" shank, direct connect to meter
TP-102 Sharp-Tip Penetration Probe 6" shank, direct connect to meter
TP-200 General-Purpose Immersion Probe 8" shank, direct connect to meter
TP-300 Alligator Clip-on Oven/Air Probe 4 ft length, high temperature insulated connector cable
For routine maintenance and testing applications. TCL329 Extension Handle allows use of
interchangeable, “direct to meter” probes with one handle and cord set. This economical and
compact Type K probe system is usable with any Wahl Thermocouple Meter. 4" Handle accepts
all ANSI mini-connector type J or K probes. 5 ft coiled lead connects to meter.
Probes listed below are not pictured.
TCL301J/K* General Purpose Probe with Delrin handle, 8" shank with .125" diameter
TCL309J/K* Handle and Probe Set. TCL329 Handle with TCL383 Immersion probe
TCL329J/K* Handy Extension Handle for use with direct connect probes.
TCL363J/K* Unmounted 3 ft Bare Thermocouple, exposed junction
TCL383J/K* Immersion Probe 8" shank with .125" diameter, direct connect to meter
* Specify J or K type thermocouple at end of model number
Q
S. TC829 Type K Thermocouple Probe Extension Handle System
TC829 extension handles are designed for rugged, long-reach applications. The TC829 Handle/Probe
System is compatible with any Wahl Thermocouple Heat-Prober Meter. Screw on any of the replaceable
RTC Series probes and go to work with confidence. Available in 12", 24", 36", or 48" lengths.
T. Type K Thermocouple Probe Systems
T1. RTC827A Heavy Duty Ingot Probe
T2. RTC825 Heavy-Duty Curved Surface Band Probe
T3. RTC823 Spring-Loaded Z-Tip Surface Probe
T4. RTC822L Heavy-duty Z-Tip Fast Response Surface Probe
T5. RTC822 Z-Tip Fast Response Surface Probe
T6. RTC824 Roll Surface Probe
T7. RTC826 Penetration Probe
T8. RTC827 Ingot Probe
T9. RTC828 (not pictured) Immersion Probe
T10. RTC877 (not pictured) Moving Surface Probe
R
T1
T3
T4
T5
T6
T7
U. PTK T-Handle Piercing Probe
304 Stainless Steel, 8" Shank length equipped with mini-T/C female
connector and Single or Dual Sensor Type K Thermocouple Probe
for a wide range of applications such as canning and meat
processing.
T2
T8
T5
S
U
Heat Prober® is a registered trademark of Wahl Instruments, Inc.
www.palmerwahl.com
S
R. TCL329 Economy Type K and J Thermocouple Probe Extension Handle
17
TC & RTD Sensor
Assemblies
TC & RTD Sensors are
engineered for quality
and reliability
A
Precise temperature measuring sensors
Wahl Thermocouples and RTD's are precise
temperature measuring sensors engineered to
provide the highest quality and reliability. You
can configure these RTD and Thermocouple
systems and components to fit most industrial
applications.
B
WARRANTY
C
D
A. Standard Welded Probe - 304SS
B. Standard Welded Probe - 316SS
C. Compression Fitting Probe - 304SS
RTD Series: WR1 Series
Sensing Element: RTD, Pt 100 IEC 751 (385 DIN)
Probe Material: 304SS
Probe Connection: Standard Nipple, Lagging Extension
Range: -50° to 400°F, (-45° to 204°C)
Stem Diameter: 1/4" or 3/8"; 2, 3, or 4 wire configurations
Stem Length: 1 to 72 inches in 1/4" increments
Options: Thin Film or Wire Wound RTD Types
Range: -50° to 400°F, (-45° to 204°C)
Sensing Element: RTD, Pt100 IEC 751 (385 DIN)
Range: -50° to 400°F, (-45° to 204°C)
T/C Series: WT1 Series
Sensing Element: Thermocouple, Types K, J or T
Range: Type K: -40° to 1000°C, or -40° to 1832°F
Stem Diameter: 1/8", 1/4", or 3/8"
Options: Grounded or Ungrounded
D. Spring Loaded Probe - 316SS
E. Sanitary Probe - 316SS
Probe Connection: Standard Nipple Only
Range: -50° to 400°F, (-45°C° to 204°C)
Stem Diameter: 1/4"; 2, 3, or 4 wire configurations
Probe Connection: 1.5", 2.0", 2.5", and 3" flange
Range: -50° to 400°F, (-45° to 204°C)
T/C Series: WT4
Probe Connection: Standard Nipple Only
Stem Diameter: 1/4"
Probe Connection: 1.5", 2.0", 2.5", and 3"
Range: Type K: -40° to 204°C, (-40° to 400°F)
Stem Diameter: 1/4"
E
18
H
Infrared
G
L
I
J
F. General Purpose Aluminum Flip-Top Heads
Case Material: Aluminum, Baked enamel silver paint and corrosive resistant hardware
Process Connection: 1/2" NPT
Conduit Connection: 1/2" NPT or 3/4" NPT
Ratings: IP68
K
G. General Purpose Aluminum Screw-Top Heads
Case Material: Aluminum, Epoxy painted for NEMA protection
Ratings: NEMA 4X and IP68
Options: Unpainted finish available
H. General Purpose Stainless Steel Screw-Top Heads
I. General Purpose Cast Iron Screw-Top Heads
Case Material: Hi-Temp Black Painted Cast Iron
Ratings: NEMA 4X
J. General Purpose Polypropylene Screw-Top Heads
Case Material: White Polypropylene
Conduit Connection: 3/4" NPT
Ratings: FDA approved polypropylene
www.palmerwahl.com
Case Material: 316SS or cast aluminum, stainless steel chain and screws
Ratings: NEMA 4X
Options: Explosion proof: Class 1, Div. 1, Groups A, B, C, and D;
Dust-ignition proof for Class II, III, Division 1, Groups E, F, and G; Hazardous Classified
Locations; Indoor / Outdoor
L. Stainless Steel Sanitary Flip-Top Heads
Case Material: 316SS
Ratings: NEMA 4X, 3A
Wahl offers In-Head
transmitters including
universal, programmable, and
fully HART compatible models.
See Sensors catalog for
more information.
Case Material: 316 Stainless Steel
Conduit Connection: 3/4" NPT
Ratings: NEMA 4X
K. Explosion Proof 316SS & Cast Aluminum Screw-Top Heads
F
19
Temp-Plate® Temperature
Sensitive Labels
The World’s Smallest Temperature Recorder
NIST Traceable with a wide variety of applications
Temp-Plates®are self adhesive temperature recording labels that
can be read at a glance. Rated temperatures are printed at the sensor window.
Each Temp-Plate contains one to several sealed heat-sensitive elements which
change chemical structure when exposed to heat exceeding their calibrated
temperatures. Where exacting temperature is critical, a Temp-Plate’s miniaturized
size permits installation on parts and in areas where other recording instruments
prove impractical.
Irreversible Temperature Labels
Irreversible Color Change from pearl gray to black at 1% of indicated value
of rated temperatures.
Description: Mylar (clear) for ranges: 90° to 350°F (32° to 176°C)
Kapton (amber) for ranges: 350° to 500°F (176° to 260°C)
Pressure sensitive adhesive backing rated to 500°F on smooth, clean, dry
surfaces. Wahl Temp-Plates are the only NIST traceable labels on the market.
A. STANDARD Four-Position - 240
Number of Positions: 4
Size: .75" x 1.75"
Base Part Number: 240
Description: Available in Mylar or Kapton
Wahl developed and patented the First miniature temperature
recording labels in 1960
B. MINI Four-Position - 101-4
Size: .38" x .82"
Base Part Number: 101-4
A
C. MINI Four-Position ROUND - 444
Size: .56" Diameter
Description: Available in Mylar only
D. MICRO Four-Position - 441
Size: .13" x .44"
D
B
E. MICRO Four-Position, Round - 442
Size: .25" Diameter
E
F. Unmarked MICRO Four-Position, Round - 440
Size: .25" Diameter
C
F
G. MINI Eight-Position- 101-8
Size: .38" x 1.5"
G
H. MINI Six-Position - 101-6
Size: .38" x 1.16"
I. MICRO Three-Position - 430
Size: .13" x .30"
H
Description: Available in Mylar Only
J. MINI Single-Position Round - 414
Size: .56" Diameter
Description: Available in Mylar or Kapton, printed °F and °C
I
K. MINI Single-Position Square - 210
Size: 1" x .75"
J
Description: Available in Mylar or Kapton, printed °F or °C
WARRANTY
Calibrated to ±1% NIST traceable
accuracy from 90°F to 500°F
(32°C to 260°C)
K
Temp-Plates are shown actual size
20
L. MINI Four-Position Round - 443
L
Fahrenheit
Celsius
Fahrenheit
Celsius
90
32
280
138
95
35
290
143
100
38
300
149
105
41
310
154
110
43
320
160
115
46
330
166
120
49
340
171
130
54
350
177
140
60
360
182
150
66
370
188
160
71
380
193
170
77
390
199
180
82
400
204
190
88
410
210
200
93
420
216
210
99
435
224
220
104
450
232
230
110
465
241
240
116
480
249
250
121
490
254
260
127
500
260
270
132
Cover material: Mylar (clear) 100° to 350°F, 38° to 176°C
Kapton: (amber) 350° to 500°F, 176° to 260°C


HOT
M
N
O
Size: .38" x .82"
Description: Kapton only for IC Batch and Vacuum Chamber
N. MICRO Four-Position - 450
Size: .20" x .65"
O. Wahl Breaker - WB130
Base Part Number: WB130
Size: .47" x .47"
Description: Printed 130°F and 54°C
P. HOT HANDS Reversible Temperature Labels - 11895-1
Industrial Safety Labels - prevent skin burns
HOT
P
In addition to the wide selection of off-the shelf Temp-Plates, Wahl’s
engineering, graphics design and manufacturing experience invites
OEM and end-users to solve their unique temperature recording requirements. We have successfully created custom and made-to-order
Temp-Plates in partnership with a wide variety of manufacturing, design, maintenance and research industry leaders, including commercial and aviation, aerospace, energy, medical, pharmaceutical, and the
computer industry.
www.wahltempplates.com
Temp-Plate® is a registered trademark of Wahl Instruments, Inc.
Number of Positions: 1 - 122°F
Size: 1.5" Diameter
Description: hand turns bright red which says “HOT” when 122°F is
reached
Custom Temp-Plates®
www.palmerwahl.com
M. MINI Four-Position - 101-4
Size: .56"
Possible Temperatures
Infrared
Instant Overheat Detector!
21
Bimetal Thermometers
C
Palmer design, quality, & craftsmanship make
Palmer Bimetal Thermometers an industry
standard for rugged reliability & accuracy
B
NEW! 316SS Bimetal
Palmer All-Star Bimetals are now
available in 316SS for use in corrosive environments. IP67 Rated
A
D
A. Universal Mount - All Angle
Model: 3AU - 3" Case, 5AU - 5" Case
Case/Form: All Angle
Ranges: -100° to 1000°F or -50° to 500°C
Stem Length: Standard lengths to 24", optional up to 60"
B. All Star - Back Connected
Model: 3BC - 3" Case, 5BC - 5" Case
Case/Form: 304SS/316SS Back Connected
Accuracy: 1% of Full Range
Range: -100° to 1000°F or -50° to 500°C and Dual Range Scales
Recalibration: External Reset Nut. Dial rotation gear positions the Dial in
relation to the Pointer
C. All Star - All Angle
Model: 3A - 3" Case, 5A - 5" Case
Case/Form: 304SS/316SS All Angle
D. All Star - Back Connected Adjustable Union
Model: 3BCJ - 3" Case, 5BCJ - 5" Case
Case/Form: 304SS/316SS Back Connected, Adjustable Union
G
E. All Star - All Angle Adjustable Union (not pictured)
Model: 3AJ - 3" Case, 5AJ - 5" Case
Case/Form: 304SS/316SS All Angle, Adjustable Union
F. All Pro - Back Connected (not pictured)
Model: 3BCP - 3" Case, 5BCP - 5" Case
Case/Form: 304SS Back Connected
Range: -100° to 1000°F or -100° to 1000°F and -70° to 540°C
Dual Range Scales
Recalibration: External Recalibration mechanism
Stem Length: 2.5", 4", 6", 9", 12", 15", 18", 24"
G. All Pro - All Angle
Model: 3AP - 3" Case, 5AP - 5" Case
Case/Form: 304SS All Angle
Range: -100° to 1000°F or -100° to 1000°F and -70° to 540°C
Dual Range Scales
Recalibration: External Recalibration mechanism
Stem Length: 2.5", 4", 6", 9", 12", 15", 18", 24"
H. Replaceable Element - Back Connected
Model: 3BE - 3" Case, 5BE - 5" Case
Range: -100° to 1000°F or -50° to 500°C
Recalibration: Micro-adjustable Pointer
22
Infrared
Custom Dial Faces Available
Need a special dial face or scale for your project?
The First Replaceable Element
Thermometer was developed by
Palmer in 1973
Replacement operations are more efficient
and cost effective. Leave the case in place
and remove and refit the factory-calibrated
internal parts only. As easy as replacing
batteries in a flashlight! No replacement of
case, and no process shut down.
H, I
K, M
O
The Slip-Fit Bimetal Thermometer
was introduced by Palmer in 1992,
allowing interchangeability in
same thermowell as MIG’s
I. Replaceable Element - All Angle
L
Model: 3AE - 3" Case, 5AE - 5" Case
Range: -100° to 1000°F or -50° to 500°C
J. Slip-Fit - Back Connected - Replaceable Element (not pictured)
The First Sanitary
Bimetal Thermometer
was introduced by
Palmer in 1992 - no
thermowell required
M. Slip-Fit - External Reset Gear - All Angle
Model: 3AI - 3" Case, 5AI - 5" Case
Range: -100° to 1000°F or -50° to 500°C
Recalibration: External Reset Nut
Stem Length: 3.5", 6", 8", 9", 12", 15", 18", 24", 30", 36"
K. Slip-Fit - All Angle - Replaceable Element
N. Sanitary Bimetal - Back Connected (not pictured)
Model: 3AIE - 3" Case, 5AIE - 5" Case
Range: -100° to 1000°F or -50° to 500°C
Stem Length: 3.5", 6", 8", 9", 12", 15", 18", 24", 30", 36"
L. Slip-Fit - External Reset Gear - Back Connected
Model: 3BI - 3" Case, 5BI - 5" Case
Range: -100° to 1000°F or -50° to 500°C
Stem Length: 3.5", 6", 8", 9", 12", 15", 18", 24", 30", 36"
www.palmerwahl.com
Model: 3BES - 3" Case, 5BES - 5" Case
Range: -40° to 400°F or -50° to 200°C
Stem Length: 2.5", 4.5"
Connection: 1-1/2", 2", or 3" Tri-Clamp Sanitary
O. Sanitary Bimetal - All Angle
Model: 3AES - 3" Case, 5AES - 5" Case
Range: -40° to 400°F or -50° to 200°C
Stem Length: 2.5", 4.5"
Connection: 1-1/2", 2", or 3" Tri-Clamp Sanitary
WARRANTY
Model: 3BIE - 3" Case, 5BIE - 5" Case
Range: -100° to 1000°F or -50° to 500°C
Stem Length: 3.5", 6", 8", 9", 12", 15", 18", 24", 30", 36"
Palmer Wahl can custom design a dial face with virtually any
design you can think of. Contact us at [email protected]
to find out more.
23
Rigid & Remote Filled
System Dial Thermometers
Versatile and dependable Palmer Direct-Drive
Double Wound Temperature coil for accuracy and
toughness in vibration applications
A. Rigid Dial Thermometers with 1-1/4"-18
Swivel Nut Fitting & Tapered Bulb
Model: 35A, 35AL - 3.5" Case, 50A, 50AL - 5" Case
Ranges: -100° to 1200°F or -60° to 500°C
Connection: 1-1/4" UNEF - 18 Swivel Nut, Optional 7/8"-22 Swivel Nut
Accuracy: ± 1 Scale Division
Calibration: External Reset Calibration Screw on back of case
Fill: Liquid or Mercury Actuated; Mercury over 500°F
Stem Length: 3.5" to 72"
Option: RTD or Thermocouple electronic sensors. 2, 3, 4-wire, 385
DIN/IEC751 Pt 100 RTD, or Type J or K Thermocouple.
B. Storage Tank Thermometers (not pictured)
Model: 35H - 3.5" Case, 50H - 5” Case
Ranges: -100° to 1200°F or -60° to 500°C
Connection: 1-1/4" UNEF-18 Swivel Nut. Optional 3/4" or 1" NPT Brass
Union
Fill: Mercury Actuated (Capillary lengths up to 250 ft); Liquid Actuated
(limited to Capillary lengths up to 15 ft and Temperature range of 500°F)
Capillary: 5 ft. of 3/16" diameter bendable stainless steel armor and
bulb. Lengths longer than 5 ft. are optional
A
A
C
C. Rigid Dial Thermometers with 1/2" NPT
& 1/4" Diameter Stem
Model: 1035 - 3.5" Case, 1050 - 5" Case
Ranges: -100° to 1200°F or -60° to 500°C
Connection: 1/2" NPT, Optional 7/8"-22 Swivel Nut or 316SS
Stem Length: 4" to 72"
D
D. Remote Reading Dial Thermometers Wall Mount
Model: 35B - 3.5" Case, 50B - 5" Case
Ranges: -100° to 1200°F or -60° to 500°C
Capillary: 5 ft of 1/2" Stainless Steel Capillary protected by a
1/4" diameter Flexible Armor; Optional Capillary materials available
E. Remote Reading Dial Thermometers Flush Mount
Model: 35C - 3.5" Case, 50C - 5" Case
Ranges: -100° to 1200°F or -60° to 500°C
Calibration: External Reset Calibration Screw on back of case,
Capillary: 5 ft of 1/2" Stainless Steel Capillary protected by a
1/4" diameter Flexible Armor; Optional Capillary materials available
E
24
F. R
emote Reading Dial Thermometers Wall or Flush Mount
F
Model: 60B, 60C - 6" Case
Ranges: -100° to 1200°F or -60° to 500°C
Capillary: Stainless Steel Capillary protected by a 1/4" diameter Flexible Stainless
Steel Armor
G. Rigid Dial Adjustable Union with 1/2" NPT
SS Adjustable Union & 3/8” Diameter Stem
WARRANTY
Model: 935 - 3.5" Case, 5" 950 Case
Ranges: -100° to 1200°F or -60° to 500°C
Connection: 1/2" NPT SS Adjustable Union, Optional 7/8"-22 Swivel Nut or 316SS
Stem Length: Standard Lengths from 6" to 72"
G
PALMER DIAL THERMOMETERS ARE USED ON THE F-16
Since the F-16 Fighting Falcon was approved for production in 1976, over 4,500 aircraft
have been built. In addition to active duty U.S. Air Force, Air Force Reserve Command, and
Air National Guard units, the aircraft is also used by the USAF aerial demonstration team,
the U.S. Air Force Thunderbirds, and as an adversary/aggressor aircraft by the United States
Navy. Although no longer being purchased by the U.S. Air Force, improved versions are still
in production for service in the air forces of 25 other nations.
In 2005 Palmer Instruments began working with Parker-Hannifin and the US Air Force, the
USAF to develop and produce an extended operating range thermometer, designed to serve
in the higher temperatures experienced by the F-16 in the Middle East. Palmer Instruments is the preferred provider of this instrument, which is being used to retrofit the tough
old war bird all over the globe.
www.palmerwahl.com
In 1972, the USAF awarded a contract to General Dynamics to produce a multi-use fighter
jet that became known as the F-16 Fighting Falcon. As this new fighter was put into production, Parker-Hannifin Control Systems Division was enlisted to provide hydraulic system
assemblies. In order to monitor the temperature of the hydraulic fluids in the system and to
better assist with the maintenance of the aircraft, Parker turned to Palmer Instruments
to help design and manufacture a tough and reliable thermometer for use in the hydraulic
system assemblies for the aircraft.
Since the 1950’s our unique bourdon coil, connected directly to the pointer
shaft, has provided uncompromising accuracy in dial thermometers. Our filled
system expertise has been incorporated into an extremely dependable thermal
system, used in many different applications, including power plants and
piping, chemical processing plants, breweries, canneries, heating and cooling
equipment. All of Palmer’s products have been engineered to provide the long
service life and ease of adjustment you’ve come to expect. Palmer’s Rigid and
Remote Direct-Drive Dial Thermometers are proudly made in our Asheville,
North Carolina plant.
Infrared
Palmer developed the First direct
drive double wound coil for dial
thermometers in the U.S.
25
Industrial Thermometers
Palmer Industrial Thermometers
Palmer Industrial Thermometers set industry
standards for accuracy, quality,
rugged operation and long term use.
With looks to match their performance, our thermometers are
designed and constructed for long-term industrial process
service. For applications requiring fast response, choose a
union model instead of a thermowell, specify one piece stem
and bulb. Our Flex Angle Adjustment feature (see below)
allows one thermometer to be “infinitely” adjusted to virtually any installation and viewing angle, greatly simplifying
engineering and purchasing operations. Their versatility also
aids in keeping both the inventory of “back-up” replacement
thermometers and process down time at a minimum.
A. Economy Industrial Thermometers
Model: 9FL, 9FLSB - 9" Plastic Case with Flex Angle
Adjustment, Aluminum Scale
Range: -40° to 550°F or -40° to 550°F & C
Connection: 1-1/4"-18 UNEF Swivel Nut
Fill: Red Reading Mercury or Sky Blue Filled
Stem Length: 3.5", 6", 8", 9", 12"
Accuracy: ± 1 scale division
B. Economy Industrial Thermometers
Model: 9AL, 9ALSB - 9" Aluminum Case with Flex Angle
Adjustment, Aluminum Scale
Range: -40° to 550°F or -40° to 550°F & C
Connection: 1-1/4"-18 UNEF Swivel Nut
Fill: Red Reading Mercury or Sky Blue Filled
Stem Length: 3.5", 6", 8", 9", 12"
Accuracy: ± 1 scale division
C. Classic Industrial Thermometers
E
Model: 200 Series - 12" Case; 300 Series - 9" Case
Range: 0° to 400°F or -18° to 205°C
Case/Scale: Extruded V Shaped Brass / Chrome Finish, with
Flex Angle Adjustment, Painted Metal Scale
Connection: 1-1/4"-18 UNEF Brass Swivel Nut, SS optional
Fill: Red Reading Mercury or Red Spirit Filled
Stem Length: 3.5", 6", 8", 12"
Accuracy: ± 1/2 scale division, Red Spirit: ± 1 scale division
D. Prover Tank Thermometers (not pictured)
Model: 210 - 12" Brass Case/Chrome Finish, with Fixed Angle
selections. Nickel Plated Scale to resist gasoline vapors
Range: 10° to 120°F
Connection: 1-1/4"-18 UNEF Brass Swivel Nut
Fill: Red Reading Mercury Filled
Stem Length: 3.5", 6", 8", 12"
Accuracy: ± 1/2 scale division
E. 2-1/2" - Wide Case Industrial Thermometers
Model: 2AA - 12", 3AA - 9" Wide Aluminum Case with Flex
Angle Adjustment, Instrument Glass, Aluminum Scale
Range: -40° to 400°F or -40° to 400°F & C
Connection: 1-1/4"-18 UNEF Brass Swivel Nut, SS optional
Fill: Red Reading Mercury or Red Spirit Filled
Stem Length: 3.5", 6", 8", 12"
Accuracy: Within 1/2 scale division
F. 1-11/32" - Narrow Case Industrials
Model: 7AA - 6.5" Narrow Blue Painted Aluminum Case with
Flex Angle Adjustment, Plastic Crystal, Aluminum Scale and
Thermowell
Range: 0° to 240°F or 0° to 240°F & C
Connection: 1/2"-14 NPT Fixed
Fill: Sky Blue Filled
Stem Length: 2-1/4"
Accuracy: 1% of Full Scale
A
C
B
Flex Angle Adjustment
With Flex Angle Adjustment just
two screws permit cases to be
rotated 180° and stems to be
positioned in 10° increments.
Users can “infinitely” adjust
Economy Line Industrial
F
Thermometers to virtually any
viewing angle required.
26
You know those thermometers with the red column?
Infrared
We invented that...
Richard Palmer’s guiding ideal has been faithfully and consistently
adhered to, as today our Classic Industrials are made the same way
they were back then.
Pictured at right: William Daley, an expert glass blower, with Palmer
Thermometers in Cincinnati, Ohio for over 50 years.
Pictured far right: Palmer thermometer circa 1930.
G. PSP500 Solar Powered Digital Thermometer
G
H
H. PSP550 Solar Powered with 4-20 mA Transmitter
Same features as above, plus single unit with dual sensors allows for local reading and remote
transmitting for convenient and reliable independent operation in a variety of applications
Transmitter Range: -58° to 302°F (-50° to 150°C)
Transmitter Output: 4-20 mA
Transmitter Ambient Temperature: -15° to 185°F (-25° to 85°C)
Transmitter Ambient Temp Error: 0.01% Span (°C)
Transmitter Supply: 8 to 35 VDC
Transmitter Max Load Resistance: 775W with 24 VDC Supply
WARRANTY
Transmitter Accuracy: 0.1% of Span
Transmitter Thermometer Sensor: Thermistor based - NTC
Transmitter Sensor: Platinum 100WRTD
www.palmerwahl.com
Environmentally friendly mercury-free thermometers
Case: Hi-Impact ABS Case, with Flex Angle Adjustment and built-in Solar cell
Range: -50° to 300°F (-45° to 150°C) F/C Switchable
Display: 1/2" LCD digits, wide ambient formula
Accuracy: 1% of reading or 1°, whichever is greater
Resolution: 1/10° between -19.9° to 199.9°F (-28° to 93°C)
Recalibration: Through case potentiometer adjustment
Lux Rating: 10 Lux (one foot candle)
Update: 10 seconds
Ambient Temperature: -30° to 140°F (-35° to 60°C)
Ambient Temp Error: Zero
Humidity: 100%
Thermometer Sensor: Glass passivated Thermistor - NTC
Stem Material: Standard Cast Aluminum Stem and Seat
Fitting: 1-1/4"-18 UNEF Machined Brass Swivel Nut
Stem Assemblies: Direct Replacement for Industrial, Bimetallic, Air Duct
Stem Length: 2.5", 3.5", 4", 6", 9", 12",
The first Palmer Thermometer was designed by Richard Penny Palmer
in the late 1800’s. He aspired to make the very finest and most accurate
thermometers possible. His son, Charles Palmer invented the redreading-mercury thermometer in 1929, revolutionizing the industry.
This radical improvement in the legibility in temperature reading was
the most outstanding achievement in modern thermometers at the time.
27
Palmer Thermowells
Palmer has manufactured thermowells since the 1940’s, and has gained an
expertise unsurpassed in the industry. Our machined wells are built in our factory
for complete control of the production process. Our attention to detail allows us to
produce precision wells, allowing us to build to meet your needs and specifications. Palmer offers wells in a large variety of connections, bore sizes, stem lengths
and materials, including exotic materials for all applications. We take great pride in
producing the finest thermowells in our Asheville, NC plant. We are an ISO certified company, assuring our processes result in a top quality product.
Proudly Made In The USA for over 70 years,
Palmer’s wide variety of thermowells protect both
your temperature sensor and production process
A
C
WARRANTY
B
F
E
D
I
G
H
L
K
J
N
M
P
O
Q
A. 1120 Series Threaded Regular
I. 1137 Series Flanged
Bore: .260" Diameter Bore; 1/2"-14 NPS Internal Thread
B. 1121 Series Threaded Regular - Lagging
J. 1138 Series Threaded Regular
C. 1124 Series Built-Up Threaded Regular
C. 1125 Series Built-Up Threaded Regular - Lagging
Bore: .260" Diameter Bore; 1/2"-14 NPS Internal Thread (not pictured)
D. 1126 Series Weld-In
E. 1127 Series Flanged
F. 1130 Series Threaded Regular
G. 1131 Series Threaded Regular - Lagging
H. 1136 Series Weld-In
Bore: .385" Diameter Bore; 1/4" -18 NPT Internal Thread
K. 1139 Series Threaded Regular - Lagging
Bore: .385" Diameter Bore; 1/4" -18 NPT Internal Thread
L. 1140 Series Threaded Regular with Tapered Bore
Bore: .437" Diameter Tapered Bore, .180" Taper per foot; 1-1/4"-18 NEF Internal Thread
M. 1141 Series Threaded Regular with Tapered Bore - Lagging
N. 1144 Series Built-Up Threaded Regular with Tapered Bore
O. 1145 Series Built-Up Threaded Regular with Tapered Bore - Lagging
P. 1146 Series Weld-In with Tapered Bore
Q. 1147 Series Flanged with Tapered Bore
28
B
A
Infrared
D
F
E
H
G
I
L
K
J
U
A. 1150 Series Threaded Regular
Bore: .501" Diameter Bore; 7/8"-22 NS Internal Thread
B. 1151 Series Threaded Regular - Lagging
C. 1154 Series Built-Up Threaded Regular
Palmer Thermowells feature custom
design, gun drilling, and solid bar
stock manufacturing.
D. 1155 Series Built-Up Threaded Regular - Lagging
E. 1156 Series Weld-In
N. 1179 Series Protection Tubes (not pictured)
Bore: 1" Diameter Bore, Schedule 80 Wall Thickness
O. 1180 Series Vanstone (not pictured)
F. 1157 Series Flanged
P. 1181 Series Vanstone (not pictured)
H. 1161 Series Threaded Regular - Lagging
I. 1170 Series Threaded Regular - Test Wells
J. 1171 Series Threaded Regular - Lagging - Test Wells
K. 1172 Series Heavy Wall Threaded Regular - Test Wells
L. 1173 Series Heavy Wall Threaded Regular - Lagging - Test Wells
M. 1178 Series Protection Tubes (not pictured)
Q. 1182 Series Vanstone (not pictured)
R. 1183 Series Heavy Wall Weld-In (not pictured)
S. 1186 Series Weld-In (not pictured)
T. 1187 Series Flanged (not pictured)
U. 1128 Series Sanitary Wells
Bore: .260" Diameter Bore; 1/2"-14 NPT Internal Thread
V. 26P Series Projectile Wells (not pictured)
Bore: .437" Diameter Tapered Bore; .180" Taper per foot; 1-1/4"-18 NEF2
Internal Thread
Bore: 1" Diameter Bore, Schedule 40 Wall Thickness
Choose Palmer - the RIGHT Thermowell for the job!
www.palmerwahl.com
G. 1160 Series Threaded Regular
C
29
Pressure & Temperature
Recorders
Designed for long service life in indoor or outdoor installations, even in harsh conditions.
Wall
Mount
Palmer Temperature & Pressure Recorders
Designed for indoor or outdoor use, our recorders provide long service life, even in harsh conditions.
Palmer Recorders are available in 8" or 12" models, and come complete with either electric, spring
wound, or PC-11 (battery operated) chart drive, and up to three (3) felt tip pens. Case mountings are
wall, flush, pedestal, pipestand or portable. The combinations of case mounts and internals allow
selections which meet your specific requirements without limiting performance or demanding a
custom price.
Recorder Mounting
Wall Mount: Furnished with flexible armored capillary or pressure connection at the bottom of case
unless otherwise specified.
Flush Mount: Furnished with armored capillary or pressure connection at the back of the case.
Front door latch standard.
Pipestand Mount: Furnished with armored capillary or pressure connection at the bottom of case
unless otherwise specified.
Portable: Supplied with flexible armor or pressure connection at the back of the case unless
otherwise specified.
Pedestal Mount: Flexible armored capillary or pressure connection may be furnished at the back,
top or bottom of case if specified.
A. Pressure Recorders
Case Mounting: Wall, Flush, Pipestand, Portable, or Pedestal
Chart Size: 8" & 12"
Pens: 1, 2, or 3
Range: 0 to 30,000 PSI
Accuracy: ± 1/2 chart graduation
Chart Drive: PC-11 Battery, Electric or Spring Wound
Pedestal
Mount
WARRANTY
B. Temperature Recorders
Pens: 1, 2, or 3
Range: -40° to 1000°F
Accuracy: ± 1 chart graduation
C. Pressure & Temperature Recorders
Pens: 1, 2, or 3
Range: 0 to 30,000 PSI / -40° to 1000°F
Accuracy: Pressure: ± 1/2 chart graduation; Temperature: ±1 chart graduation
Portable
Pipestand
Mount
Flush
Mount
30
D. PC-11 Quartz Multi-Speed Chart Drive
Infrared
Designed for outdoor use, Palmer’s hermetically sealed PC-11 operates reliably even
in wet and dirty environments. Freezer tested to -40°F, it will withstand extreme temperatures. The highly adaptable design will fit any chart recorder, and makes exchange
in the field a snap. The eleven speed dial on the front of the case allows field selectable
recording intervals from 60 minutes to 32 days. The dial also turns the unit off to
conserve battery power. A pulsating LED indicator behind the dial shows that the battery
is charged and that the unit is operating. Our PC-11 is rated intrinsically safe, which
makes it ideal for use by gas utility companies and in other situations where hazardous
or combustible materials are present.
• Universal Mounting Bracket: fits all chart recorders for easy replacement
D
• .25" Drive Shaft: With flat, accepts different drive hubs
• Maintenance-Free: Closed construction case protects all moving parts
E. Pressure Elements
E1. High Pressure Material: 316 SS helical coil with SS Fittings and tubing for
E1
ranges 30 to 30,000 PSI.
E2. Low Pressure Material: Beryllium copper diaphragm silver brazed to copper
tubing and brass fittings, for ranges below 30 PSI
Accuracy: ± 1/2 chart graduation
F. Temperature Elements
E2
Case Mounting: All mercury filled systems are pressurized for
overrange capabilities and rapid response. The system is completely
welded to prevent deterioration, reinforced with added flexible armor.
Accuracy: ± 1 chart graduation
Length: Capillary Length up to 25 ft.
F
The NEW! FD5 Digital Datalogger is the new generation of data acquisition systems. All the necessary software is embedded in the unit,
allowing you to program and read data from any computer! FD5
acquires up to 400 data samples per second from one channel.
Acquisition speed is the same no matter the number of active
channels. Select between 5, 10 or 15 channels, depending
on model, and additional channels can be added modularly.
The internal memory of 1,000,000 data samples can be expanded
using an SD card or USB drive, offering several months of storage. The 5 TTL inputs/
outputs can be used to trigger acquisitions or events. Two analog outputs, (0-10V), are
also included.
• Accept 5 to 15 synchronous differential and universal analog inputs
• Multiple communication modes available including: Ethernet, USB, RS232 and RS485
• Data processing, statistics, conditioning, Boolean calculations
WARRANTY
www.palmerwahl.com
G
G. FD5 Data Logger
• 11 Speeds: switch selectable, choose from 60 min., 96 min., 12 hr., 1 day, 2 day , 7
day, 8 day, 14 day, 16 day, 31 day or 32 day recording intervals
31
Pressure Gauges
Great gauges stocked for you so you can ship
from our warehouse as needed!
Palmer Fearless Gauges rugged construction
and design is enhanced by Palmer’s vibration
and pulsation resistant Dampened Movement.
The results are a Pressure Gauge suitable for
demanding applications in all industries.
A. Fearless All Stainless Steel Gauges
Model: 25SF, 40SF
Dial Size: 2.5", 4"
Tube/ Socket: AISI 316 SS
Connection: 1/4" NPT, 1/2" NPT
Range: 0-15,000 PSI, -30" Hg/160#, Bar, kg/cm2, kPa
Rating: IP54
A
B. Gas Test Gauges
Model: 40KB
Dial Size: 4"
Tube: Phosphor Bronze Diaphragm Internals
Socket/Connection: Lower Connected Brass Valve Body
with Schrader Valve, and 3/4" NPT Process Connection
Range: 6 PSI / 12" Hg or 15 PSI / 30" Hg
Rating: IP41
C. All Stainless Steel Gauges
Model: 25CS, 25SS, 40SS, 60SS
Dial Size: 2.5", 4", 6"
Tube/ Socket: AISI 316 Stainless Steel
Connection: 25CS/25SS: 1/4"; 40SS/60SS: 1/2" NPT
Rating: Filled Gauge: IP64; Dry Gauge: IP54
C
B
D. Current Loop Transmitter Gauge
Model: 40ES with 4 - 20 mA Output
Dial Size: 4"
Tube/ Socket: AISI 316L SS
Connection: 1/2" NPT, 1/4" optional
Range: 0-20,000 PSI, 0-1600bar
Rating: Filled Gauge - IP67 Dry Gauge - IP55
E. Low Pressure Gauge
Model: 25PP, 40PP, 60PP, 25SC, 40SC, 60SC
Dial Size: 2.5", 4", 6"
Tube/Socket: PP Models: Brass,
SC Models: AISI 316 SS
Connection: PP Models: 1/4" NPT,
SC Models: 1/2" NPT
Range: 0-10 PSI, -30/200" H2O, Vac
Rating: IP41
D
F. Brass Case Gauge
Model: 25BB
Dial Size: 2.5"
Tube/ Socket: Phosphor Bronze
Connection: 1/4" NPT
Range: 0-10,000 PSI, -30" Hg
Rating: IP54
G. Solid Front Gauges with Blow Out Back (not pictured)
Model: 40FS, 4" Stainless Steel Case
Model: 45TS, 4.5" Phenolic, Fiberglass Reinforced Case
Tube/ Socket: AISI 316 SS Tube & Socket, 45TS optional K Monel
Connection: 1/2" NPT, optional BSP
Single or Dual Ranges available
Rating: 40FS - Filled Gauge: IP67; Dry Gauge: IP55
32
E
WARRANTY
WARRANTY
Dry
Gauges
Wet
Gauges
F
N. Solar Digital Gauges
Model: 15PB, 20PB, 25PB, 40PB
Dial Size: 1.5", 2", 2.5", 4"
Tube/ Socket: Brass or Phosphor Bronze
Connection: 1/8" NPT on 1.5", 1/4"
NPT on 2", 2.5", 4"
Range: 0-600 PSI, -30" Hg
Rating: IP40
Model: PSP100
Display: LCD with (4) 5/8" high digits
Blow-out Back: Solid Front, IP65
Connection: 1/4" NPT or 1/2" NPT
Range: Vacuum to 1,000 PSI
Rating: IP65
I. Sanitary Gauges
L. Differential Gauges
Model: 40SS
Dial Size: 4"
Tube/Socket: AISI 316 SS
Connection: 1-1/2" Tri-Clamp, 2" Tri-Clamp
Range: 0-1,000 PSI, -30" Hg/30#
Rating: IP55
Model: 40MS
Dial Size: 4"
Tube/Socket: AISI 316 SS
Range: 0-800 PSI
Rating: IP45
J. Electrical Contact Gauges
M. Contractor Gauges
Model: 40HB, 40HS
Dial Size: 4"
Tube: 40HB: Copper Alloy, AISI 316L SS
over 870 PSI 40HS: AISI 316L SS
Socket: 40HB: Copper Alloy, 40HS: AISI 316L SS
Range: 15-20,000 PSI, Bar, kPa, MPa
Rating: Filled Gauge: IP65; Dry Gauge: IP55
Electric Contacts: Single or Double
Model: 45SB
Dial Size: 4.5"
Tube/Socket: Brass
Range: 0-500 PSI, -30" Hg
Rating: IP40
O. Solar Transmitter Gauges
Model: PSP150 with 4-20 MA output
(requires loop power 9-35 VDC) (not pictured)
Display: LCD with (4) 5/8" high digits
Blow-out Back: Solid Front, IP65
Connection: 1/4" NPT or 1/2" NPT
Range: Vacuum to 1,000 PSI
Rating: IP65
L
H
J
I
K
N
www.palmerwahl.com
M
K. Steel Case Gauges
Model: 15CB, 20CB, 25CB, 40CB
Dial Size: 1.5", 2", 2.5", 4"
Tube: Brass or Phosphor Bronze
Socket: Brass
Connection: 1/8" NPT (15CB only), 1/4" NPT
Range: 0-4,000 PSI, -30" Hg/300#
Rating: IP54
Infrared
H. Stainless Steel Case Gauges
33
Pressure Gauges,
Pressure Transducers,
and MPT Pressure Tester
A. Aero Type Low Pressure Differential Gauges
Series: J-2000 Series
Case: 4" (100mm).; Corrosion resistant, die cast aluminum case and bezel; Standard Flush
Mount, optional Surface Mount
Pointers: Patented Safe-Slide Pointers slide around the lens, allowing the user to set Safe,
Warning, and Danger Points; all easily visible at a distance
Range Availability: inH2O, PSI, cmH2O, mmH2O, Pa, kPa
Process Connection: High and Low Pressure: 1/8" drill tube thread on back and side
Accuracy: ± 2% of Full Scale
Rating: IP54
A
B. Digital Pressure Gauges
Series: EDG with User Selectable Resolution, Engineering Units, Modes, and single point calibration
Case: Protective Rubber Boot provides impact dampening
Range Availability: Units for clean gas as low as vacuum and as high as 300 PSI. Corrosive gas units from 0 to 200 PSI.
Pressure reset/zero button
Process Connection: 1/4" NPT, bottom connected
Internals: Upgraded internals for corrosive models to 316 SS, with 304 SS connection
Accuracy: ± 1% Full Scale. ± 1 digit
Rating: IP54 with Boot; IP40 without Boot
Battery: Standard 9V battery; conservation mode with auto off timer, user adjustable from 5 to 180 seconds in 5 second intervals; good for 8000
cycles (180 sec. per cycle with 300 sec. intervals) or approximately 1500 hours - reducing cycle time will extend battery life
B
WARRANTY
C. Diffuse Silicone Sensor Level Transmitters
Series: PPT400
Measurement Range: 0 to 200 mmH2O
Output: 4-20 mA, 0-5V
Accuracy: 0.25% Full Scale (includes linearity, repeatability and
hysteresis)
Overpressure Limit: 2.5 times Full Scale
Long Term Stability: ± 0.2% of Full Scale per year
Response Time: 10 ms
Power Supply: 24 VDC
Electrical Connection: Non-polar, 2 wire current output
Rating: IP67
D. Differential Pressure Transducers/Transmitters
Series: PPT500
Measurement Range: 1 to 290 PSI (0.01 to 2 MPa) Gas,
0 to 1450 PSI (0.03 to 10 MPa) Liquid
Output: 4-20 mA, 0-5 V
Accuracy: 0.25% Full Scale (includes linearity, repeatability and
hysteresis)
Long Term Stability: ± 0.15% of Full Scale per year
Electrical Connection: DIN
Rating: IP65
D
C
E. Economy Ceramic Piezoresistive Pressure
Transducers
Series: PPT1200R
Measurement Range: 29 to 8700 PSI (0.2 to 60 MPa)
Output: 4-20 mA
Accuracy: 0.5% Full Scale
Electrical Connection: DIN
Rating: IP65
34
E
WARRANTY
Three NPT End Ports

Six Internal
NPT Threads
Palmer’s NEW Multi-Thread Pressure Tester
The patented MPT Tester eliminates special
testing apparatus and makeshift manifolds
for rough and finish inspections - making
them more economical, less labor intensive
and 100% easier.
 1/2"
 3/4"
Just screw it on and the MPT will fit multiple
thread sizes!
 1"
F. MPT PRO Tester
 1-1/4"
Model: MPTP
End Ports: Three 1/4" NPT Ports
Internal Threads: Six NPT Threads
1/2", 3/4", 1", 1-1/4" 1-1/2", 2" NPT
Pressure Limit: 5,000 PSI
Material: Aircraft Aluminum
 1-1/2"
 2"
F
G. MPT CRAFTSMAN Tester
Model: MPTC
End Ports: One 1/4", Two 3/4" NPT Ports
Internal Threads: Six NPT Threads
1/2", 3/4", 1", 1-1/4" 1-1/2", 2" NPT
G
H. MPT ACE Tester
Model: MPTA
Internal Threads: Four NPT Threads
3/8", 1/2", 3/4", 1" NPT
J
H
I. MPT MINI Tester
J. MPT INDUSTRIAL KIT
Model: MPTKI
INCLUDES: MPTP PRO Tester
MPTC CRAFTSMAN Tester
MPTA ACE Tester
60" H2O, 35oz Gauge
34 kPa, 5 lb Gauge
Mini Ball Valve
Hand Pump with Check Valve
Schrader Valve
¼" Male Quick Connect Fitting
Hose Bib Adaptor for Hydrostatic Testing
¼" x 1/8" Hose Connection
I
Also available: Contractor, Residential, Fire Sprinkler and Starter Kits
Industries that use Pressure Testers
Gas Lines
HVAC/Vents
Hydraulic Lines
Irrigation Systems
Medical Gas Lines
Natural Gas
Pipe Fitting
Plumbing
Sprinkler Systems
Utility Lines
Water/Waste Lines
and more!
www.palmermpt.com
Model: MPTM
Internal Threads: Three NPT Threads
1/8", 1/2", 3/4" NPT

Infrared

N
www.palmerwahl.com
35
Pressure Pumps and
Precision Test Gauges
NEW! Hydraulic Calibration Pressure Pump
The NEW! Palmer PV10K Hydraulic Calibration Pressure Pump is a high quality hand pump designed
to quickly and easily generate hydraulic pressures. Its construction makes it compatible with most fluid
media, and an optional seal kit can be supplied for aggressive applications. The built-in vernier provides
excellent control and is easy to adjust even at high pressures. The dual stage pump includes a selector
valve which increases the priming speed and greatly reduces the effort required to generate high pressures.
Optional pressure relief valve can be supplied to provide protection to connected instruments.
A. Hydraulic Calibration Pressure Pump
WARRANTY
Model: PV10K
Range: 0 to 10,000 PSI / 0 to 700 bar
Connection: 1/4" NPT or BSP Female Connections
Construction Materials: Series 300 stainless steel, brass, nickel plated brass, PyrexTM,
Nitrile, polyurethane and PTFE. Compatible with most hydraulic fluids, oils and water
Dimensions: 9" x 6.25" x 2.75" (228 mm x 159 mm x 70 mm)
Weight: Approximately 3.2 lbs (1.4 kg)
A
NEW! Combination Pneumatic Pressure and Vacuum Pump
The NEW! Palmer PV600 Combination Pneumatic Pressure and Vacuum Pump is a lightweight yet high quality combination
pressure and vacuum hand pump,designed to provide maximum pneumatic pressures efficiently and effortlessly.
B. Combination Pneumatic Pressure and Vacuum Pump
Model: PV600
Range: 28 inHg Vacuum to 600 PSI
Connection: 1/4" Female Gauge and Process Connections
Construction Materials: Bright nickel plated brass, anodized aluminum, phosphor bronze (springs),
Nitrile, nylon
Dimensions: 8.5" x 4" x 2.5" (216 mm x 101 mm x 63 mm)
Weight: 1 lb (0.45 kg)
B
NEW! Precision Test Gauge
Designed for field and laboratory applications for precision pressure measurement and field gauge
calibration. The PTG100 Series is an ideal substitution for precision pointer pressure gauges.
• Pressure ranges to 2500 bar
• Up to nine selectable pressure units
• Fully temperature-compensated accuracy from 32° to 122°F (0° to 50°C)
• Low power consumption, continuous working time up to 10,000 hours in non-sleep mode
• 2-Point filed calibration capability • Auto peak recording
C. Model PTG100
C
Accuracy: 0.025% of full scale; 0.05% of full scale; 0.1% of full scale; 0.5% of full scale
Display: 6 full digit LCD with LED Backlight
Pressure Units: User selectable Pa, kPa, MPa, PSI, bar, mbar, inH2O, mmH2O, inHg, mmHg depending on range
and resolution capabilities of the gauge
Compensated Temperature: 32° to 122°F (0° to 50°C).*0.025% Full Scale accuracy guaranteed only over the
ambient temperature range of 68° to 77°F (20° to 25°C)
Storage Temperature: -4° to 158°F (-20° to 70°C)
Humidity: < 95%
Media Compatible: 0 to 0.16 Bar: Non-corrosive Gas compatible, 0.35 to 2500 Bar: Liquid, Gas or Steam
Compatible with 316SS
Pressure Port: 1/4" NPT, optional 1/4" to 1/2" SS Adaptor
Battery: 3 AA Alkaline Batteries, User Replaceable
Battery Life: 1 year under normal working conditions. Battery life will vary depending on the frequency of readings
Case Material: Aluminum alloy
Wetted Parts: 316L SS, Differential Gauge has brass internals for clean gas applications only
Dimensions: 3.9" Diameter x 1.4"; Depth x 6.1"; Height (100 mm x 37 mm x 157 mm)
WARRANTY
36
NEW! Digital Pressure Gauge
Infrared
Designed for field and laboratory applications for precision pressure measurement and field
gauge calibration. The PTG200 Gauge features non-volatile memory which will retain recorded
data, even if battery power is lost.
• Pressure ranges to 2500 bar
• Fully temperature-compensated accuracy from 32° to 122°F (0° to 50°C)
• Up to nine selectable pressure units display
• Low power consumption, continuous working time up to three years under non-sleep mode
• 2-Point filed calibration capability
D. Model PTG200
Accuracy: 0.1% of full scale; 0.2% of full scale
Pressure Units: User selectable Pa, kPa, MPa, PSI, bar, mbar, inH2O, mmH2O, inHg, mmHg
depending on range and resolution capabilities of the gauge
Compensated Temperature: 32° to 122°F (0° to 50°C)
Storage Temperature: -4° to 158°F (-20° to 70°C)
Humidity: < 95%
Media Compatible: 0 to 0.16 Bar: Non-corrosive Gas compatible,
0.35 to 2500 Bar: Liquid, Gas or Steam Compatible with 316SS
Dimensions: 4.5" Width x 3.5" Depth x 6.1"; Height (115 mm x 90 mm x 157 mm)
D
WARRANTY
NEW! High Precision Digital Reference Pressure Recorder
Battery powered pressure recorder with an LCD display. Available on-screen data includes: statistics, recording status, display options,
and calibration information. Statistics can be cleared at any time during logging. With 262,143 readings, this gauge has one of the largest
memory capacities of similar data recorders on the market. The nonvolatile memory will retain recorded data, even if battery power is lost.
With supplied software, data is downloaded and ready for review and export to Excel. Serial connection is also available.
• Pressure Ranges to 2,500 bar
• Real-time operation, high speed download
• User selectable measurement units
• Advanced temperature compensation
• 2-Point filed calibration capability
E. Model PTG300
www.palmerwahl.com
E
WARRANTY
Accuracy: 0.05% of full scale; 0.1% of full scale; 0.5% of full scale
Pressure Units: User Selectable Pa, kPa, MPa, PSI, bar, mbar, inH2O, mmH2O, inHg, mmHg
depending on range and resolution capabilities of the gauge
Response Time: 0.1 mS
Start/Stop Time: Software programmable start time and date, up to six months in advance
Compensated Temperature: 32° to 122°F (0° to 50°C)
Storage Temperature/ Humidity: -4° to 158°F (-20° to 70°C), < 95%
Media Compatible: 0 to 0.16 Bar: Non-corrosive Gas compatible, 0.35 to 2500 Bar: Liquid, Gas or Steam
Compatible with 316SS
Over Pressure Warning: 120%
Reading Rate: Adjustable from 1 reading every 2 seconds to 1 every 24 hours
Dimensions/ Weight: 3.9" Diameter x 1.4" Depth x 6.1" Height (100 mm x 37 mm x 157 mm), 1 lb (0.45 kg)
Communication: RS232 (DB9/F, environmentally sealed)
Baud Rate: 115200
Software: included, Windows compatible
• Full Scale Accuracy: 0.1%,0.2%
37
Test & Calibration
Instruments
Simple and robust to meet the needs of today’s
higher accuracy transmitters and sensors
Handheld Calibrators for Maximum Portability
User friendly and robust, the Wahl TC Series Pocket Calibrators are designed to simplify
temperature transmitters and probes maintenance and commissioning. They feature 0.02% Accuracy
and measure and simulate Thermocouples or RTD’s. Resolution is programmable for better reading by
user with up to 1mΩ or 1uV.
Well adapted for different process job procedures due to their wide choice of ranges and specific functions
such as scaling and ramping.
A. TC Pocket Thermocouple Calibrator
• High accuracy of 0.02% of reading
Model: TC621
Sensing Element: Thermocouple
Probe Connection: Mini-Compensated Connector
Probes: Thermocouple Types: K, T, J, E, R, S, B, U, L, C, N,
Platinum, MO, NiMo/NiCo
Display Resolution: 3 user selectable resolutions (up
to 3 decimal places: High, Middle or Low resolution.
Statistics: Calculate Max, Avg, Min statistics; Simulate steps
Meter Accuracy: 0.02%
Language: 5 user selected languages; English, French,
Spanish, German and Italian
Power Supply: 4 AA batteries, optional rechargeable battery
pack with charger available
Rating: IP54
• Measurement and simulation of 14 thermocouples and 12 RTD types
WARRANTY
A
B. TC Pocket RTD Calibrator
Model: TC622
Probe Connection: 4 pin round connector or 4 banana plugs
Probes: RTD: Types: Pt 50, Pt 100, Pt 200, Pt 500, Pt 1000, Ni 100,
Ni 120, Ni 1000, and Cu 50
Display Resolution: 3 user selectable resolutions (up
to 3 decimal places: High, Middle or Low resolution.
Rating: IP54
B
Process Signal Calibrator
The Wahl P32 Process Signal Pocket Calibrator has been designed
with increased performance in order to meet the demands of today’s
higher accuracy transmitters and process sensors. Accuracy of
0.015% of reading allows the P32 to be used as a standard for on site
operations. The P32 features adjustable display resolution to simplify
measurements with maximum resolutions of 1 μA and 1mV.
C. Process Signal Pocket Calibrator
C
Model: P32 DC Voltage, DC Current, Measurement and Emission
Probe Connection: Quick Connect Terminals with 4 mm banana plugs
Measurement: up to 50V
Simulation: up to 15V
Measurement and Emission: up to 25mA
Measurement Functions: Compatible with HART Transmitters
Scaling: 2 Scaling modes available
Display Resolution: User Adjustable
Rating: IP54
38
Infrared
Portable Multifunction
Calibrators
D. C50 Portable Multifunction Calibrator
Top Accuracy: 200 ppm
Temperature Accuracy: 0.013% RDG for TcK; 0.012% RDG
DC Current & Loop Supply: Up to 50 mA; 0.0175% RDG
DC Voltage: up to 50 V In / 20 V Out; 0.013% RDG
Frequency: Up to 20 KHz In / Up to 10 KHz Out; 0.005% RDG
Resistance: Up to 4000 Ω; 0.012% RDG Ω
Pressure: Limited HART Protocol compatible functions
E. C75 Portable Multifunction Calibrator with Memory and Pressure (not pictured)
Top Accuracy: NA
Temperature Accuracy: NA
DC Current & Loop Supply: NA
DC Voltage: Up to 50 V; 0.013 RDG
Frequency: Up to 20 KHz In; Up to 10 KHz Out; 0.005% RDG
Resistance: Up to 4000 Ω; 0.012% RDG
Pressure: Relative pressure: up to 30 bar; Absolute pressure up to 1000 bar; 0.05% RDG,
Limited HART Protocol compatible functions
F. C100 Portable Multifunction Calibrator with Memory, Pressure
and Laboratory Accuracy (not pictured)
DC Current & Loop Supply: Up to 50 V; 0.0175% RDG
DC Voltage: Up to 50 V; 0.010% RDG
Frequency: Up to 20 KHz In / Up to 10 KHz Out; 0.005% RDG
Resistance: Up to 4000 Ω; 0.010% RDG
Pressure: Relative pressure: up to 30 bar; Absolute pressure up to 1000 bar; 0.05% RDG,
Limited HART Protocol compatible functions
G. C150 Portable Multifunction Calibrator with Memory, Pressure,
High Accuracy and Dual Input (not pictured)
H. T150 High Precision All-in-One Temperature Field Calibrator
for T/C, RTD, and Thermistors (not pictured)
Channels: 2 channels: IN / IN or IN / OUT configurable
Thermocouple Accuracy: 0.005% RDG
RTD Accuracy: 0.006% RDG
Thermistor Accuracy: 0.006% RDG
Compliance: 21 CFR Part 11 / NADCAP Heat Treatment Standards
Key Features: 50 KOhm range and Steinhard-HART equation for Thermistors
www.palmerwahl.com
D
• Simultaneous Measurement and Generation
• Rugged IP54 Construction for On-Site Use
• Quick Connect Terminals
• Measure and Generate Voltage, Current and Resistance Signals
• Temperature by Resistive Probes and Thermocouples
• Frequency for Frequency Signals and for Dry Contacts
• Compliant with 21 CFR Part 11
All models (except the C50) feature advanced data exploitation:
scaling, relative measurement, simulation of ramps and steps,
synthesizer, square root, statistical function, calibration of transmitters and utilize DATACAL calibration software. They also feature
transmitter function, switch test, and memory.
Why you need a
Wahl Calibrator for your business
• Increase customer satisfaction with
consistent products.
• Comply with quality standards.
• Improve product quality.
• Ensure traceability throughout
your entire manufacturing process.
• Integrate all the necessary functions
for adjustment and maintenance of
your process.
• Our products are easy to use and
Palmer Wahl is there to help, every
step of the way.
DC Current & Loop Supply: Up to 100 mA; 0.007% RDG
DC Voltage: Up to 50 V; 0.005% RDG
Frequency: Up to 100 KHz In; 0.01% RDG
Resistance: Up to 3600 KΩ; 0.006% RDG
Pressure: Relative pressure: up to 30 bar; Absolute pressure up to 1000 bar; 0.05% RDG
Compliance: 21 CFR Part 11 / NADCAP Heat Treatment Standards
HART Protocol Compatibility: HART: digital calibration and data transfer. Calibration of
thermistors.
Features of the C Series Calibrators
The Wahl C Series Portable Multifunction Calibrators
integrate all the necessary functions for calibration and maintenance of processes, making them the ideal instruments for
maintenance, quality control, and calibration. The ergonomic
design and embedded software makes them easy to use high
performance calibrators. All models are in the same housing
as shown right, and are powered by a rechargeable NIMh
battery.
39
Black Body Calibration
Sources
Calibrate infrared thermometers and
thermal imagers quickly and accurately
A
Surface Hot Plate Type
A. Model: CBB13EC
D
Easy Calibration
NEW! Wahl Black Body Temperature
Calibration Sources are controlled and
predictable, featuring targets with dull,
black surfaces for an emissivity as
close to 1 as possible.
Built-in or stand-alone digital temperature controllers with each unit provide
accurate, stable temperatures while
displaying the temperature readings of
the calibration source. The heated plate
or cavity provides a target of known temperature and emissivity, and
virtually any infrared thermometer with a spot size diameter less than
the cavity size can be calibrated. Models with communication ports
are capable of PC programming to control temperature set points for
automatic test applications.
With stable, repeatable results Wahl Black Body
Calibration Sources allow the user to ensure uniformity.
E
WARRANTY
Working Temperature: Ambient 5° to 40°C Adjustable
Environment Temperature: 0° to 40°C
Temperature Stability: ± 0.1 to 0.2°C per hour
Aperture Type/Diameter: Ambient Square, 2.75 x 2.75 inches (70 x 70 mm)
Temperature Resolution: 0.1°C
Measuring Accuracy: ± 0.2°C @ 40°C
B. Model: CBB14AC (not pictured)
Working Temperature: 300° to 600°C
Temperature Stability: ± 0.3 - 0.5°C per hour
Aperture Type/Diameter: Uncooled Round, 3.15 inches (80 mm)
Measuring Accuracy: ± 0.3% of full scale +1.0°C
C. Model: CBB14KC (not pictured)
Working Temperature: -20° to 60°C
Aperture Type/Diameter: Cooled Round, 3.15 inches (80 mm)
Measuring Accuracy: ± 0.3% of full scale + 1.0°C
D. Model: CBB15GC
Working Temperature: Ambient 5° to 300°C (not pictured)
Temperature Stability: ± 0.1 - 0.3°C per hour
Surface Hot Plate Type with External Temperature Controller
E. Model: CBB16KC, Working Temperature: -20° to 60°C
F
Model: CBB16LC, Working Temperature: -40° to 60°C
Environment Temperature: 0° to 40°C (≤ 20°C when working at -20°C)
Temperature Resolution: CBB16KC: 0.1°C, CBB16LC: 0.01°C
F. Model: CBB18GC
Working Temperature: Ambient 5° to 300°C
Environment Temperature: Blackbody: 40° to 60°C; Controller: -5° to 50°C
Aperture Type/Diameter: Uncooled Square, 11.81 x 11.81in (300 x 300 mm),
accuracy tolerances in center 8" x 8" area.
G
G. Model CBB18MC
Working Temperature: -45° to 70°C
Environment Temperature: Blackbody: -40° to 60°C; Controller: -5° to 50°C
Temperature Resolution: 0.01°C, when > -20°C
Measuring Accuracy: ± 0.5% of Reading when ± 1.0°C
40
Infrared
H
Model: HSICBB-P
System Accuracy: ± 0.3°F or ± 0.2°C over entire range
Radiator: 3" diameter concentric rings with integral 4-wire RTD sensor
Meter: 4-wire RTD thermometer
Ambient Operating Range: -40° to 158°F (-40° to 70°C)
Scale: °F or °C user selectable
Display: 4-digit 1" high LCD
Display Resolution: 0.1°
Display Update Rate: 10 seconds
WARRANTY
Repeatability: 0.1° F or C
Power: 2 AA Lithium Thionyl Chloride Batteries
Case Rating: IP67 Pelican case (1 meter submersion for 30 minutes with case closed)
I
K
J
L
K. Model: CBB22BC
Temperature Stability: ± 2.5°C per hour
Temperature Resolution: 1°C
Measuring Accuracy: ± 0.3% full scale + 1.0°C
J. Model: CBB21DC
L. Model: CBB22JC
Temperature Stability: ± 2.5°C per hour
Temperature Resolution: 1°C
Measuring Accuracy: ± 0.3% full scale + 1.0°C
www.palmerwahl.com
Cavity Type
I. Model: CBB21CC
H. Portable Calibration Black Body
41
Portable & Benchtop Style
Calibrators
Your choice for quality made calibrators with
the accuracy to meet your needs
A. Programmable Benchtop Micro-Ohmmeter
Model: OM21 For measurement of thermistors and heat-sensitive components
Calibration: Calibrated electronically, no internal adjustments needed
Sensing Element: 4 wire terminal
Interface: RS232 or IEEE 488-2 link
Display Resolution: High resolution 0.1 μΩ up to 20 kΩ
Memory: 1000 measurements
Range: Eight measurement ranges
Options: Battery and charger, IEEE 488-2, Software, Cables, Clamps,
Rack Mount and Carrying Case
A
B. Industrial Benchtop Micro-Ohmmeter
Model: OM22 Designed for Industrial test; preconfigured or user programmable
Calibration: Calibrated electronically, no internal adjustments needed
Sensing Element: 4 wire terminal
Interface: RS232 and IEEE 488-2 programmable
Display Resolution: High resolution 0.1 μΩ up to 20 kΩ
Meter Accuracy: 0.03%, 26,000 counts
Range: Eight measurement ranges
Options: Battery and charger, IEEE 488-2, Software, Cables, Clamps,
Rack Mount and Carrying Case
B
Portable Micro-Ohmmeter
C
OM16 Portable Micro-Ohmmeter is designed for outdoor or
indoor use. Easy to use, the OM16 performs measurements
on inductive and non-inductive resistances with a DC
current. Its large interactive display informs the operator in
real time about the type of measurement, range, calculation
conditions (resistance calculated according to a reference
temperature), thresholds status and values. Designed for
harsh environments, it is encased in a Pelican® carrying
case and features a washable plastic keyboard and keylocked measurement plugs.
C. Portable Micro-Ohmmeter
Model: OM16 Designed for harsh environments
Sensing Element: 4 wire configuration
Measurement Plugs: 2 Circular Locking Connectors, Protection
up to 250V Fuse Protection
Interface: RS232
Display Resolution: 0.1°C
Meter Accuracy: ± 0.5°C @ 23°C ± 5°C
Range: Measuring current adaptable to the measuring
range from 10A to 100mA
Approvals: IP53 according to EN60529; EN61010-1, Category II,
Pollution 2
WARRANTY
42
Infrared
MIL-SPEC Soldering Iron
Tester
• MIL-SPEC compliant millivolts AC only test with
pass/fail warning light for voltage
• Pass/fail warning light for resistance test, user
selectable 2 or 5 ohms
• Output to recorder: 1 mV, 100 mV/mV, 100 mV/ohm
• Transient voltage spike detector detects transients
over 100 mV and 1μs pulse width
• Built-in thermocouple connector for Type K probes,
wire probe included
E
• Function selection switch for fast tests without moving
the iron tip
D
• Auxiliary AC convenience outlet powers iron under test
and insures common ground with the tester
• Comprehensive Operators Handbook with calibration
instructions and troubleshooting guide
• ESD safe construction
• Wrist strap tester verifies strap integrity
The First universal soldering iron tester with
digital display was developed by Wahl in 1986
The portable high performance ST2200 Soldering Iron Tester measures
soldering iron performance in seconds under actual soldering iron
conditions - no need to disassemble the soldering iron prior to test.
The convenient simple-to-operate tester was designed to conform with
testing for Soldering Standard IPC/EIA J-STD-001C and MIL-SPEC
compliant to assist users in producing consistent, quality solder joints.
Prevent damage from electrostatic discharge, electrical leakage, or
induced voltage to safeguard critical semi-conductor and integrated
circuit components. Unit is NIST Traceable.
Precise Thermocouple Sensors
simulate actual solder joints to
verify soldering iron integrity
D. Soldering Iron Tester
Model: ST2200: 110V AC or 220V AC; °F or °C
Temperature Range: -50° to 1300°F or -10° to 700°C
Temperature Accuracy: ± 0.1% of reading ± 1 digit
Temperature Resolution: 0.1°F/°C or 1.0 °F/°C
Tip Ohms Range: 0-99.9 Ω
Tip Ohms to Ground Accuracy: 0-20 Ω ±0.1 Ω, 20-100 ±0.5% of reading
Tip Ohms to Ground Resolution: 0.01 or 0.1Ω
Tip mV to Ground Range: 0 - 30mV
Tip mV to Ground Accuracy: ± 0.1mV
Tip mV to Ground Resolution: 0.01mV or 0.1mV
North American, European, or British style plug and receptacle
E1
E. Sensors for Soldering Iron Testers
E1. WST-02 Sensor: High temperature Type K ribbon thermocouple, stainless
steel support strap, solder bead and glass filled Teflon body (housing). Measures tip
temperature of most small (< 1/8") conical, chisel and screwdriver type soldering tips,
(shown on tester above). Heavy duty sensor. Small to medium tips 0.2 gram mass.
E2
E2. WST-02B Bonnet Sensor: Same as above, but with a “bonnet” which acts
as a position stop to guide iron tips for repeatable measurements in the identical
position. It also stabilizes the tip to prevent movement during measurement which can
cause temperature fluctuations.
E3
www.palmerwahl.com
E3. WST-03 Elevated Wire Sensor: Welded thermocouple wire sensor, support
posts and glass filled Teflon body. May be used when the iron tip is not compatible
with the WST-02 sensors. Allows the operator to measure temperature at an exact
point on the iron tip. For all tip sizes.
WARRANTY
see video at www.palmerwahl.com/soldering_iron_tester.php
43
Wahl designs and manufactures to the most stringent quality standards. We provide certified,
traceable calibration data in support of companies who require meeting ISO 9001:2008, FAA,
and FDA quality standards. Calibrations to both IPTS-68 and ITS-90 are available.
Calibration Services
STANDARD CERTIFICATION: Unit is calibrated to factory specifications using NIST traceable equipment.
Certificate of Conformance - Statement that our product meets published specifications. Included on the packing list
with each shipment.
Long Form Certificate of Conformance - Available upon request, includes Certificate of Conformance with customer’s
PO number, items shipped, and any product serial numbers for products included in the shipment.
Calibration Sticker - (or tag) Advising you of the date your instrument(s) was/were calibrated, and the suggested date for
the next calibration. This is provided with most products at time of purchase, and when you return a product for calibration.
NIST TRACEABLE TEST REPORT: Unit is calibrated to factory specifications using NIST Traceable
equipment. Provides instrument test data with details of standard instruments used to perform the calibration. “As Received” and “As Left” Test Data is provided, as appropriate, with any out of tolerance
conditions noted, and a unique test number assigned.
NIST Traceable Calibration Sticker provides the date your instrument(s) was/were calibrated, technician performing
the calibration, suggested date for the next calibration, and references the unique test number shown in the test report.
Our Quality Management system is certified to conform to ISO9001:2008. We maintain a calibration system in conformance
with ANSI/NCSL Z-540 and MIL-STD-45662A.
REGISTER YOUR PRODUCT: Registration is fast and easy. Register your product for Warranty Protection and our
Calibration Reminder Service to keep your QC program in compliance. Go to: www.palmerwahl.com/register.
Repair and Other Services
Palmer Wahl offers repair and calibration services on most products we sell. The customer will receive a written estimate for
approval before proceeding with work. Repair pricing includes Standard Certification as listed above.
Detailed Repair Report - Available upon request, this report provides details of evaluation and repairs made.
Custom Points - Palmer Wahl will calibrate your instruments at your specified temperature or pressure points.
Special Requests - When calibrating your instrument, our experienced personnel will help you to achieve the level of
quality you require in your facility. Note: Before returning your product please call Customer Service at
1-800-421-2853 or go to www.palmerwahl.com and click on Service/Product Return Request.
Engineering Services - WE CAN DO IT!
Our 175 plus years of experience with temperature and pressure means we’re the go-to guys. Our USA based engineering
department can work with you to solve your specific problem – if one of our standard products doesn’t meet your needs,
we can work with you to build a custom solution. We regularly design specialty temperature probes, thermowells, and
temperature systems to meet the specific needs of our customers. Because we have our own machine shop, we don’t have
a minimum order requirement – if you need just one, we can do it. If your application requires specialty material or testing
– we can do it!
Palmer Wahl Warranty
Manufacturer warrants all products listed in this catalog to be free from defects in material or workmanship under normal
use and service. The Manufacturer agrees to repair or replace any product which upon examination is revealed to have been
defective due to faulty workmanship or material if returned to our factory, transportation charges prepaid, within the product
specific warranty period stated in the catalog by the manufacturer. This warranty is in lieu of all other warranties, expressed
or implied and of all obligations or liabilities on its part for damages including but not limited to consequential damages,
following the use or misuse of instruments sold by the Manufacturer. No agent is authorized to assume for manufacturer
any liability except as set forth above.
Palmer Wahl products are available from:
Palmer Wahl
234 Old Weaverville Road
Asheville, North Carolina 28804
Phone: (800) 421-2853 • (828) 658-3131
Fax: (828) 658-0728 • Email: [email protected]
www.palmerwahl.comwww.wahlheatspy.com
www.palmermpt.comwww.wahltempplates.com
ISO 9001:2008
CERTIFIED QUALITY
MANAGEMENT SYSTEM
PW7304
January 2015

PDF - Palmer Wahl Instrumentation Group

Transcription

Similar documents

dl-100 black box - Milwaukee Instruments

Document 6530851

DW-TS-N1P – Temperature probe

Document 6578387

Sample gas probe GAS 222.17

Video Borescope RIGEL UF 4.0mm Brochure

corneometer

Vibrating Sample Magnetometer (VSM) Specifications

Document 6536205

Bovine • Equine • Ovine • Caprine • Porcine - vaucluse