PRE-QUALIFICATION NOTICE - Pakistan Ordnance Factories

Transcription

PRE-QUALIFICATION NOTICE - Pakistan Ordnance Factories
For uploading on PPRA and POF website
PRE-QUALIFICATION NOTICE
1. Applications are invited for pre-qualification of contractors for the following work so as to
reach the office of the undersigned on 23-04-2015.
Name of Work
PROVISION OF HT/LT POWER SUPPLY AND INTERNAL ELECTRIFICATION OF
HYDRAULIC EXTRUSION PRESSES PLANT TO BE INSTALLED AT EXPLOSIVES
POF FACTORY, WAH CANTT.
2. Detail of BOQ is attached.
3. For pre-qualification, parties having experience, capability and resources may apply along with
the following information and documents: i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
xii.
Name of the firm along with Postal Address, Phone & Fax #.
Status of firm (Partnership deed, Article of association or Registration of firm’s
certificate etc)
Copy of incorporation certificate & organizational structure.
P.E.C Registration in C-6 (Minimum) with specialization code EE-04, EE-05 and
validity.
Similar nature of works up to Rs. 10.00 million completed during last five years.
Similar nature of works in hand alongwith names and addresses of clients.
Pre-qualification for similar nature of works with Govt, Semi Govt, Public Sector..
List of Key Personnel & Details of Technical staff.
NTN No. and Certificate of Professional Tax.
Bankers Certificate showing credit worthiness & Auditor’s Report of last three years.
Affidavit for Not Blacklisted or involved in arbitration / litigation with any client
during the last five years.
Proof of enlistment with other Organizations.
4. Those who fail to provide above mentioned Information / documents shall be disqualified.
5. After the completion of Pre-qualification, Tender documents will be issued to the selected prequalified firms upto 30-04-2015. Tenders will be received by the Director Services POFs Wah
Cantt upto 1100 hrs on 07-05-2015 and opened at 1200 hrs on the same date.
6. Firms / contractors already working with POFs may also provide the information / documents
of the ongoing projects.
7. GM-Electrical may be contacted at phone No. 051-9055-21099 & email [email protected]
for further information.
Tashhir ud Din
(Director Services)
C-O4 POFs Wah Cantt.
Tele No. 051-905521090
Fax No. 051-9314100
BILL OF MATERIAL
PROVISION OF HT / LT POWER SUPPLY AND INTERNAL
ELECTRIFICATION OF HYDRAULIC EXTRUSION PRESSES PLANT TO BE
INSTALLED AT EXPLOSIVE FACTORY, WAH CANTT.
Sr.#
A/U
Qty
1.
H.T end termination Kits make Raychem Germany (complete in
all respect) for HT XLPE Power Cable 185mm²/3C . Supply &
fixing. (Specifications are attached)
supplied jointing kit will be tested at 33 KV
Nos.
05
2.
PVC striaght joint, HT, 11 KV for XLPE cable, consissting of
mould resin, HT tape, semi conducting tape, ferrules & earth
wire etc suitable for HT cables 3 core, 185mm2 Supply & fixing.
(Specifications are attached)
Make: Raychem Germany
Nos.
03
Mtrs.
2000
Mtrs.
2000
5.
PVC Cable 6mm2/4 Core, PVC insulated sheathed, 600/1000V
with annealed stranded copper conductor as per BSS No. 6346,
1987 / IEC standards. Supply & fixing.
Brands: Newage, AGE, Pakistan Cables.
Mtrs.
2000
6.
Indoor Termination Kit 240mm2/4 Core (Heat Shrinkable),
complete with accessories, 1100 V, supplied jointing kit will be
tested at 3300 V. Supply & fixing.
Make: Raychem Germany.
Nos.
12
7.
Indoor Termination Kit 185mm2/4 Core (Heat Shrinkable),
complete with accessories, 1100 V, supplied jointing kit will be
tested at 3300 V. Supply & fixing.
Make: Raychem Germany.
Nos.
10
8.
Indoor Termination Kit 300mm2/4 Core (Heat Shrinkable),
complete with accessories, 1100 V, supplied jointing kit will be
tested at 3300 V. Supply & fixing.
Make: Raychem Germany.
Nos.
15
3.
4.
Nomenclature
1.5mm2/4 Core, 600/1000 V Electrical power cable PVC/PVC with
stranded annealed copper conductor as per BSS / IEC standards.
Supply & fixing.
Brands: Newage, AGE, Pakistan Cables.
4mm2, 2 core, 600/1000 V Electrical power cable PVC/PVC with
stranded annealed copper conductor as per BSS / IEC
standards. Supply & fixing.
Brands: Newage, AGE, Pakistan Cables.
9.
10.
Bus bar chamber weather proof wall mounting, current rating
3000 Amps,
600 / 1000 V, 50 Hz. Completet with 3 phase and half neutral
bus bars. Supply & fixing.
Chamber shall be pre fitted complete in all respects with
i) Incoming MCCB 6 Nos, 600 A rating, 25KA, TP for 300mm2 / 4
C cable size at chamber top front.
ii) Outgoing MCCB 02 Nos, 600 A rating, 25KA, TP for 185mm2 /
4 C cable size at chamber bottom for supply to fire pump (110
KW, 1400A start current).
iii) Outgoing MCCB 05 Nos, 600 A rating, 25KA, TP for 240mm2 /
4 C cable size at chamber bottom for supply to Chiller (360 KW,
700 A start current).
iv) Outgoing MCCB 01 No, 600 A rating, 25KA, TP to connect
300mm2 / 4 C cable size for supply to 100 Ton Refrigeration
plant.
v) Outgoing MCCB 02 Nos, 300 A rating, 25KA, TP for 185mm2 /
4 cable size at chamber bottom for supply to Hyd drives (2x55
KW).
vi) MISC MCCB 06 Nos, 50 A rating with adjustable O/L current
setting at chamber bottom.
Construction of Earth Pit for Kiosks, for areas having water table
4.5 meter depth as per detail given at Para 25.4 & Sr.No 25-469
of MES Schedule-2009.
Set
01
Nos.
02
11.
Construction of concrete foundations for Kiosks
(8x7x1.5) Mtr.
Nos.
02
12.
Excavation and back filling of H.T cable trench 1500m x 0.91m x
0.46m complete.
Cu.
Mtrs.
628
13.
Excavation and back filling of L.T. Cable trench 100m x 0.76m x
0.61m complete.
Cu.
Mtrs.
46
14.
Perforted bottom with solid snap on lid cover cable tray of
appropriate size approx. 6 x 24 inches (H x W) complete with
support brackets and cable clamps. Supply & fixing.
Mtrs.
200
15.
Cable glands (Brass made) and cable end boxes. Supply & fixing.
Nos.
50
16.
Sand. Supply & laying in trench.
CuFt
5200
17.
Burnt Bricks. Supply & laying in trench.
Nos.
14000
Note:
1.
Supplier will be responsible for supply, installation & commissioning
of above stated electrical items and any other accessories required
for subject power supply.
2.
The above mention items should be inclusive of all applicable taxes.