Motoriserade gardinskenor, 8001

LINDHS SYSTEM
8001, Eldrag
Elektriskt system som kan kombineras med flera motorstyrkor
alternativt manuellt system med kulkedjedrift.
Eldrag 8001 kräver auktoriserad elinstallatör.
För bästa funktion rekommenderar vi ridåband 9886 och ridåkrok 9881 till sömnad och montage av gardin.
Takfäste
Väggfäste
FAKTA
Mått skena:
Material: Färg: Bockas: Montering: bxh 32x26 mm
Aluminium
Vit (RAL 9016)
Ja, radie 350 mm
Takfäste, vägg
Motor placeras i änden av skenan vid
singel- och tandemsystem.
CG LINDH AB
Krangatan 2-4, 441 38 Alingsås
Tel: 0322-66 83 30 Fax: 0322-66 83 39
lindhs.com
Januari 2014. Reservation för eventuella ändringar. Produktion svenssonmolin.se
SYSTEM 8001
ELDRAG 8001 SKENA
ELDRAG 8001 SKENA
Översikts system 8001
Typ:
Rakt system
kg
100
90
80
70
30 WT
50
45 WT
FUNKTIONELLA STÄNGER
60
65 WT
40
30
20
10
Hand
0
1
2
3
4
5
6
30 W
7
8
45 W
9
10
65 W
11
12
13
30 WT
14
15
16
17
45 WT
18
19
20
21
m
kg
1 bockning 90° eller 2 bockningar 45°
100
90
80
70
60
50
30 WT
40
45 WT
65 WT
30
20
Hand
10
0
1
2
3
4
30 W 45 W
5
6
7
8
65 W
9
10
11
30 WT
12
13
14
45 WT
15
16
17
18
19
20
21
15
16
17
18
19
20
21
m
kg
2 bockningar 90°
100
90
80
70
60
50
40
30 WT 45 WT
30
65 WT
20
10
0
30 W
1
2
3
4
45 W
5
6
65 W 30 WT
7
8
9
10
11
45 WT
12
13
14
m
Begränsingar:
Max höjd på gardin 5 m
Vikt av textil max 500 g/m2
Mängden textil får ej överstiga dubbel längd skena
Max belastning per glid 500 g
Standard 10 glid/meter
W
WT
Watt
Watt tandem
Bockad skena: Bredden av gardinen = Skenas längd i utsträckt läge.
Minsta bockningsradie 350 mm
CG LINDH AB
Krangatan 2-4, 441 38 Alingsås
Tel: 0322-66 83 30 Fax: 0322-66 83 39
lindhs.com
63
TECHNICAL GUIDELINES ELECTRO MOTORS
ELDRAG 8001 SKENA
Connection motors
1) Individual blind with single motor
5060, 5080, 5066 Single
connector box
connector box
2) 2 blinds with single motor
5060, 5080, 5066 Single
3) Individual blind with tandem motor
5060, 5080
4) Individual blind tandem
5066, 5070, 5090
5) Individual blind doubletandem
5066, 5070
switch motor
switch
2)
supply line
motor
connector box
connector box
Attention:
installation diagrams
for VDE approved
motors only!
switch motor motor
switch
3)
supply line
4x1,5
7x0,75
motor
motor
connector box
3x1,5
connector box
Technische Änderungen vorbehalten
5x0,75
motor with switch motor without motor without
end switch
end switch end switch
switch
motor with
end switch
4)
supply line
connector box
connector box
Connexion instructions for sundrape® electric motors
Connexions and supply lines have to be passed on site
by authorized electricians according to VDE (German
with switch motor without motor without
switch
Electrical Engineering Association) and local EVU (elec- motor
end switch
end switch end switch
Netz230V
230V50Hz
50Hz
Netz
tric supply company) instructions.
5)
3x1,5
For controls of two and more motors a group control is
connector box
required. Cable laying plans and wiring diagrams for
group and central controls as well as remote controls can
4x0,75
7x0,75
4x0,75
4x0,75
be submitted on request. Switch off unused lines and
systems before you connect the motor. Place push-butM
M
M
tons above a height of 1,5 m near the system. Allowed motor without switch off motor with switch off switch motor without switch off
running periods and torques have to correspond with the
motor’s technical data.
motor with
end switch
Abzweigdose
Motor ohne
Abschaltung
Motor mit
Abschaltung
Schalter
Motor ohne
Abschaltung
4x0,75
M
Motor ohne
motor
without switch off
Abschaltung
230V 50Hz
N
In order to avoid backing ups of condensers of running
motors, parallel connexion of two or more motors at one
exit is prohibited. For decoupling purposes a separate
contact for each direction of rotation is required.
Use only mechanically or electrically locked switches and
push-buttons. Switches and controls may not permit concurrent up and down operation! The time to change the
running direction from up/down to down/up has to be at a
minimum of 0,5 seconds. This applies also for programmable control devices.
N
L1
R
PE
L
PE
Motor ohne
Motor mit
motor without
switch off motor with
switch off
Abschaltung
Abschaltung
Schiene Schiene
1 rail 11
CG LINDH AB
Krangatan 2-4, 441 38 Alingsås
Tel: 0322-66 83 30 Fax: 0322-66 83 39
lindhs.com
Connection
Anschluss fuer for
VDEVDE
Motore motors
ohne
motor Motor
without
switch off
Abschaltung
Motor ohne
motor
without switch off
Abschaltung
Schiene 2
Schiene
2 rail 2
Januari 2014. Reservation för eventuella ändringar. Produktion svenssonmolin.se
Stand: 02.2008 • 591 820
1)
supply line