stk 2800 / fakra
Transcription
stk 2800 / fakra
wire processing ! W E N STK 2800 / FAKRA STK 2800 - FAKRA Automatic Machine for Processing Coax Cable for Automotive Applications Designed for flexible product processing with variable performance, this modularly designed machine is capable of processing various types of coaxial cables and various types of FAKRA automation standard coax connectors in 90° and/or 180° versions. The typical process steps are: • • • • • • Cable feeding from a pre-feeder and cutting to length or Manual cable loading by operator (pre-coiled or not) Outer insulation stripping Support sleeve crimping, if needed Shield folding back, if needed Support sleeve crimping, if needed • • • • • • • Inner insulation stripping Inner connector crimping Outer connector feeding, placing and crimping Plastic housing feeding, coding verification and assembly Product testing and verification Product labeling Buffering, coiling and packaging Fully configured, this type of machine can produce up to 1’100 fully tested and ready to ship cables per hour. The modular machine concept allows machine configurations to either assemble only one connector gender or to produce combination such as male/female or even straight or angled connectors on the same line. A typical machine configuration: Technical Data / Technische Daten: Cable types / Kabeltypen: Cable length / Kabellänge: Stripping length outer insulation / Abmantellänge Aussenisolation: Stripping length dielectric insulation / Abmantellänge Isolation Innenleiter: Connector type / Kontakttyp: Inner conductor crimping / Innenleiter Anschlagen: Outer connector crimping / Aussenkontakt Anschlagen: Production rate – Fertigungsleistung: Machine control / Maschinensteuerung: Machine availability / Maschinenverfügbarkeit: Electrical supply – Elektrischer Anschluss: Air supply - Druckluft: RG 174; RG 58; 75 Ω; RTK031 other types upon request / andere Typen auf Anfrage 150 mm - 10’000 mm ≥ 5m requires conveyor on floor; ≥5m benötigt Förderband am Boden 3 - 20mm; adjustable / einstellbar 2 - 10mm; adjustable / einstellbar FAKRA compatible; designed for automated processing FAKRA-kompatibel; Entwickelt für automatische Verarbeitung electro mechanical press / elektrische Anschlagpresse with crimp force monitoring / mit Crimpkraftüberwachung electro mechanical press / elektrische Anschlagpresse with hexagon crimp / mit hexagonaler Crimpform ca. 550 cables/h @ cable length ≤ 2m; auto or handloading ca. 550 Kabel/h bei einer Kabellänge ≤ 2m; Auto or Handladen ca. 1’100 cables/h @ Kabellänge < 2m, double station ca. 1’100 cables/h @ Kabellänge < 2m, Doppelstationen Siemens S7 PLC with MMI-terminal Siemens S7 SPS mit MMI-Terminal 90 - 95%, depending on cable and contact configuration 90 - 95%, abhängig von der Kabel- und Kontaktkonfiguration 400 VAC, ± 10% (3P+N+E), 50Hz ≥ 6 bar Innovation by Curti Costruzioni Meccaniche S.p.A. Via Emilia Ponente 750, 48014 Castel Bolognese (RA), Italy Tel: +39 0546 656 065 - Fax: +39 0546 505 51 - Email: [email protected] - Web: www.curti.com Questi dati potranno essere variati senza preavviso. This data can be changed without notice.