2018 Killtest 70-735 Real Exam Q&As

Transcription

2018 Killtest 70-735 Real Exam Q&As
Vendor: Microsoft
Exam Code: 70-735
Exam Name: OEM Manufacturing and Deployment for
Windows 10
Version: Demo
Killtest 70-735 Full Version: https://www.killtest.com/MCP/70735.asp
QUESTION NO: 9
Note: This question is part of a series of questions that present the same scenario.
Each question in the series contains a unique solution that might meet the stated goals.
Some question sets might have more than one correct solution, while others might not
have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a
result, these questions will not appear in the review screen.
You are configuring a reference computer for a new UEFI-based deployment image
of the 64-bit version of Windows 10. The reference computer has two physical hard
disk drives.
You need to configure a partition on Disk 0 to support a recovery partition.
Solution: You create an EFI system partition of 150 MB that uses the NTFS file
system.
Does this meet the goal?
A. Yes
B. No
Answer: B
QUESTION NO: 10
You plan to create an image of Windows 10 that contains a push-button reset solution.
The solution will have custom settings for each edition of Windows 10.
You need to prepare the push-button reset solution.
What should you include in the solution?
A. an unattended file and a bare metal recovery configuration
B. an unattended file and extensibility scripts
C. extensibility scripts and system restore points
D. a bare metal recovery configuration and Scanstate packages
Answer: B
QUESTION NO: 11 HOTSPOT
You have a reference computer that runs Windows 10. The computer contains a
provisioning package named Package1.ppkg. Package1.ppkg is located in
C:\Packages\.
You plan to create an image of the reference computer.
You run sysprep.exe on the computer, and then you start the computer by using
Windows Preinstallation Environment (Windows PE).
You need to ensure that the image uses the least amount of disk space possible.
How should you complete the command? To answer, select the appropriate options in
the answer area.
NOTE: Each correct selection is worth one point.
Answer: <map><m x1="227" x2="439" y1="123" y2="150" ss="0" a="0" /><m
x1="518" x2="653" y1="98" y2="118" ss="0" a="0" /><m x1="58" x2="244"
y1="286" y2="308" ss="0" a="0" /></map>
Explanation:
QUESTION NO: 12 HOTSPOT
For each of the following statements, select Yes if the statement is true. Otherwise,
select No.
NOTE: Each correct selection is worth one point.
Answer: <map><m x1="697" x2="730" y1="85" y2="118" ss="0" a="0" /><m
x1="695" x2="730" y1="134" y2="164" ss="0" a="0" /><m x1="765" x2="798"
y1="179" y2="206" ss="0" a="0" /></map>
Explanation:
QUESTION NO: 13
You deploy Windows 10 and Microsoft Office 2016 to a test computer.
You plan to capture an image of the test computer, and then to deploy the image to
computers that will be sold to your customers.
You need to ensure that when a customer first starts an Office application, the
customer is prompted to try, buy, or activate Office.
What should you run on the test computer before the capture?
A. officedeploymenttool.exe
B. setup.exe/admin
C. oemsetup.cmd Mode=OEM
D. setup.exe/configure
Answer: C
QUESTION NO: 14 HOTSPOT
You extract an image of Windows 10 in audit mode to a computer named Computer1.
You install an application named App1 on Computer1.
You need to create a siloed provisioning package of App1.
How should you create the package? To answer, select the appropriate options in the
answer area.
NOTE: Each correct selection is worth one point.
Answer: <map><m x1="489" x2="974" y1="115" y2="138" ss="0" a="0" /><m
x1="486" x2="590" y1="282" y2="308" ss="0" a="0" /></map>
Explanation:
QUESTION NO: 15
You have a computer named Computer1.
You deploy an image of Windows 10 to Computer1. You start Computer1 in audit
mode, and then you install several device drivers.
You need to capture an image of Computer1.
Which tool should you use?
A. Windows System Image Manager (Windows SIM)
B. dism.exe
C. Express Deployment Tool (EDT) for Windows 10
D. scanstate.exe
Answer: B
QUESTION NO: 16 DRAG DROP
You are creating an image of Windows 10 for a new model of computers that will
have Microsoft Office 2016 installed.
You install the Office Deployment Tool.
You need to install Office 2016. The solution must install Microsoft Word and Excel
without installing any other Office applications.
Which three actions should you perform in sequence? To answer, move the
appropriate actions from the list of actions to the answer area and arrange them in the
correct order.
Answer: <map><m x1="5" x2="281" y1="30" y2="48" ss="0" a="0" /><m x1="8"
x2="281" y1="60" y2="78" ss="0" a="0" /><m x1="8" x2="280" y1="93" y2="108"
ss="0" a="0" /><m x1="6" x2="283" y1="124" y2="139" ss="0" a="0" /><m x1="6"
x2="288" y1="153" y2="171" ss="0" a="0" /><m x1="323" x2="583" y1="27"
y2="46" ss="1" a="0" /><m x1="326" x2="583" y1="64" y2="87" ss="1" a="0"
/><m x1="325" x2="586" y1="103" y2="125" ss="1" a="0" /><c start="1" stop="0"
/><c start="3" stop="1" /><c start="2" stop="2" /></map>
Explanation:
QUESTION NO: 17
You have an image of Windows 10.
You discover that files in the Windows Component Store are corrupt.
You need to repair the files in the component store.
What should you do?
A. Run dism.exe and specify the /Cleanup-Image and the /RestoreHealth parameters.
B. Run dism.exe and specify the /Cleanup-Image and the /StartComponentCleanup
parameters.
C. Run sfc.exe and specify the /scanfile and /offwindir parameters.
D. Run sfc.exe and specify the /scannow parameter.
Answer: A
QUESTION NO: 18
You have a computer that runs Windows 10. The computer starts in UEFI mode and
has a 64-bit processor.
You insert a USB key in the computer. The USB key has a drive letter of F.
You need to ensure that you can start the computer by using Windows Preinstallation
Environment (Windows PE) from the USB key.
Which two commands should you run? Each correct answer presents part of the
solution.
NOTE: Each correct selection is worth one point.
A. makewinpemedia.cmd /UFD C:\WinPe F:
B. makewinpemedia.cmd /ISO C:\WinPe F:
C. copype.cmd amd64 C:\WinPe
D. dism.exe /Export-Image
/SourceImageFile:C:\WinPE\boot.wim/SourceIndex:1/DestinationImageFile:F:\boot.
wim
E. copype.cmd x86 C:\WinPe
Answer: A,E
QUESTION NO: 19 HOTSPOT
You have an image of Windows 10 Anniversary Update.
You plan to deploy the image to several new computers.
You must add Microsoft Office 2016 to the image.
You have a Configuration.xml file that will be used to deploy Office 2016. The
contents of the file are shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement
based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer: <map><m x1="723" x2="839" y1="74" y2="97" ss="0" a="0" /><m
x1="722" x2="864" y1="200" y2="225" ss="0" a="0" /></map>
Explanation:
Killtest Exam Features
Real Exam Q&As
100% Passing Guarantee
PDF + Software
One Year Free Update
Once Failed, Full Refund
Subscribe Killtest Youtube To Get More Exam Info
Contact Us
Mail: [email protected]
Tel: +1 (315) 557-0907
FB Messenger: [email protected]
Live Online Support
Killtest would be the best choice for preparing your IT certification exams. Just come to Killtest
to choose your wish exam. We ensure your success.