CAB 920 – The measuring system for peak balancing performance

rz_brosch_cab920_en_0706.qxd
02.08.2006
14:03 Uhr
Seite 2
Use:
Basic system:
Function:
Display:
Input:
Measuring methods:
Unbalance measuring range:
Speed range:
Data storage:
Interfaces:
Options:
Universal for horizontal or vertical balancing machines, hard- or soft bearing
Modular and service friendly design with measurement, analysis and display units. Data processing
and calculation via integrated industrial PC with Schenck Computer Aided Balancing software
– Vector and numeric display
– Measure dynamic unbalance in 2 planes, the static unbalance and the couple unbalance
– Automatic tolerance comparison
– Display of polar or in equally / non-equally distributed components
– Averaging of the measured values over time, rotor type related
– Tolerance calculation according to ISO 1940
– Balancing protocol in PDF format
– Conversion to other setup data
– Single compensation, key compensation, index balancing
– Drive control for automatic measuring cycle
– Definition and storing of type-related balancing procedures for simplification
of complex work sequences
– Context-sensitive help function, automatic self-test
– Monitoring measuring signals
Active 15“ TFT colour display with high luminosity
Context dependent assignment of function keys, touchscreen
Efficient, fully digital measured data processing for highest measurement accuracy
1 : 2,000,000
100 to 5,000 rpm , optional up to 100,000 rpm
Dependent on the size of the storage medium, practically unlimited
– USB for peripherals
– Frontside USB for data export to storage media, etc.
– Network interface for data backup, ethernet
– Protocol printer
– Marking measured values, averaging over runs
– Angle indexing indicator
– Extensive balancing software e.g. for drilling, milling, setting weights
– Overlapping cycle
– Rotor specific calibration
– Alternating operation of 2 balancing machines with one measuring unit
– Measured value recording and storage during startup
– Vibration velocity measuring mode with single and double (2f) reference frequency
– Bode- and Nyquist-diagram
– Additional measurement channels for runout measurement, etc.
– Statistical software
– Industry-specific solutions for
– the roller industry: Laser scanning, special report, 3-plane display, etc.
– Propshaft industry: up to 4 planes in parallel, permanent or rotor-specific calibration, compensation of reactive forces
– Aviation industry: Averaging over runs, weight distribution, nesting
CAB 920 – The perfect combination of simplicity and performance
The new CAB 920 is the latest development of the legendary Computer Aided Balancing (CAB) measuring systems
from Schenck. By combining the most powerful instrumentation features available with an unsurpassed level of
simplicity, the CAB 920 creates a new balancing standard for any application. You’ll find it easy to significantly improve your balancing results whether performing simple balancing tasks or the most complex balancing procedures.
Simple to use – the key to more security
Balancing and
Diagnostic Systems
SCHENCK RoTec GmbH
Landwehrstraße 55
D-64293 Darmstadt
www.schenck-rotec.com
eMail: [email protected]
Phone: +49 (0) 6151 - 32 23 11
Fax: +49 (0) 6151 - 32 23 15
RC 1034 -1e · 10.0806 · BESP · D.O.G. All information without obligation. Subjects to change without notice
Technical specifications
CAB 920 – The measuring system for peak balancing performance
RC 1034 -1 e
rz_brosch_cab920_en_0706.qxd
02.08.2006
14:03 Uhr
Seite 2
Use:
Basic system:
Function:
Display:
Input:
Measuring methods:
Unbalance measuring range:
Speed range:
Data storage:
Interfaces:
Options:
Universal for horizontal or vertical balancing machines, hard- or soft bearing
Modular and service friendly design with measurement, analysis and display units. Data processing
and calculation via integrated industrial PC with Schenck Computer Aided Balancing software
– Vector and numeric display
– Measure dynamic unbalance in 2 planes, the static unbalance and the couple unbalance
– Automatic tolerance comparison
– Display of polar or in equally / non-equally distributed components
– Averaging of the measured values over time, rotor type related
– Tolerance calculation according to ISO 1940
– Balancing protocol in PDF format
– Conversion to other setup data
– Single compensation, key compensation, index balancing
– Drive control for automatic measuring cycle
– Definition and storing of type-related balancing procedures for simplification
of complex work sequences
– Context-sensitive help function, automatic self-test
– Monitoring measuring signals
Active 15“ TFT colour display with high luminosity
Context dependent assignment of function keys, touchscreen
Efficient, fully digital measured data processing for highest measurement accuracy
1 : 2,000,000
100 to 5,000 rpm , optional up to 100,000 rpm
Dependent on the size of the storage medium, practically unlimited
– USB for peripherals
– Frontside USB for data export to storage media, etc.
– Network interface for data backup, ethernet
– Protocol printer
– Marking measured values, averaging over runs
– Angle indexing indicator
– Extensive balancing software e.g. for drilling, milling, setting weights
– Overlapping cycle
– Rotor specific calibration
– Alternating operation of 2 balancing machines with one measuring unit
– Measured value recording and storage during startup
– Vibration velocity measuring mode with single and double (2f) reference frequency
– Bode- and Nyquist-diagram
– Additional measurement channels for runout measurement, etc.
– Statistical software
– Industry-specific solutions for
– the roller industry: Laser scanning, special report, 3-plane display, etc.
– Propshaft industry: up to 4 planes in parallel, permanent or rotor-specific calibration, compensation of reactive forces
– Aviation industry: Averaging over runs, weight distribution, nesting
CAB 920 – The perfect combination of simplicity and performance
The new CAB 920 is the latest development of the legendary Computer Aided Balancing (CAB) measuring systems
from Schenck. By combining the most powerful instrumentation features available with an unsurpassed level of
simplicity, the CAB 920 creates a new balancing standard for any application. You’ll find it easy to significantly improve your balancing results whether performing simple balancing tasks or the most complex balancing procedures.
Simple to use – the key to more security
Balancing and
Diagnostic Systems
SCHENCK RoTec GmbH
Landwehrstraße 55
D-64293 Darmstadt
www.schenck-rotec.com
eMail: [email protected]
Phone: +49 (0) 6151 - 32 23 11
Fax: +49 (0) 6151 - 32 23 15
RC 1034 -1e · 10.0806 · BESP · D.O.G. All information without obligation. Subjects to change without notice
Technical specifications
CAB 920 – The measuring system for peak balancing performance
RC 1034 -1 e
rz_brosch_cab920_en_0706.qxd
02.08.2006
14:03 Uhr
Seite 5
The display menu in your own language also makes it easier for
operators to quickly and easily perform tasks.
Log book function
All measurement sequences for a rotor are saved in a
central database so that if “problem cases” occur you
have access to a history of preceding steps, which often
points out the solution.
Upgrade old to new
The CAB 920 is ideally suited for modernising older
horizontal and vertical balancing machines – even
those of external makes. So that you upgrade
your existing balancing machine with state-of-the-art
measuring technology.
All information is clearly displayed: e.g. Plane 1
in components, plane 2 polar and veering in display.
Convenient touchscreen control
All communications between you and the measuring
system take place via the touch screen monitor. You
control all functions with your index finger and in this
way communicate with the balancing machine. Values
and texts are entered in dialog fields with the help of interactive direct input windows and no keyboard or
mouse is required.
Clear, easily understood dialogs
We place special value in clear dialogs in order to avoid
misinterpretations or incorrect input. Even when setting
up a rotor for the first time you will see how easy it is to
work with the CAB 920. This is made possible by clear
menu structures based on the work sequence and a
hierarchical layout of the functions.
Fast unbalance detection
After the measuring run it is your aim to quickly and reliably assess the rotor. The unbalance visualisation with
vector displays has proven ideal for this. Together with
the numerical displays, you can detect the precise location and size of the unbalance at a glance.
eMode – The key to easy balancing
eMode simplifies the controls of the balancing machine
to two sides of dialog: Input of the rotor data and the
results module with balancing instruction. Additional
functions like automatic determination of the balance
speed or calculation of the balance tolerances to
ISO 1940 makes balancing easy with the CAB 920. All
standard balancing methods, e.g. drilling, milling
or attaching weights are supported.
Networking ensures information flow
CAB 920 can be easily integrated in your company network. You can exchange the balancing results electronically with colleagues in the quality assurance department and can then further process these with standard
office programs. It also enables online remote diagnosis
with extensive service functions.
Individual assignment of the function keys
Some of the function keys can be individually assigned.
You can therefore directly call up frequently used functions and achieve a perfectly balanced rotor even faster.
Balancing protocol with integration of graphic elements
With the balancing protocol you can document the
balancing of each rotor in detail and have an overview
of the stored type and calibration data. You can individually change it to your own requirements and integrate
graphic elements, such as your company logo or even
photos of the balanced rotor.
By marking the measured value
and averaging over several runs, it
is possible to correct the unbalance
behaviour of unstable rotors.
The operator can even display
the angle and amount of
unbalance when balancing
elastic rotors in three planes.
A clear user dialog makes entering a new
rotor type child's play in the eMode.
The unbalance effect of an
elastic rotor can be measured during the startup
and displayed versus
speed in a Bode diagram.
Clear vectorial and numerical display of
the unbalance with coloured
marking when the tolerance is reached.
Calculating the unbalance tolerances to the current DIN ISO 1940
Different tolerance specifications for static and dynamic
unbalance can be displayed on one screen.
The measured values for an elastic rotor can
be saved for both planes during the startup and
displayed as a Nyquist diagram.
rz_brosch_cab920_en_0706.qxd
02.08.2006
14:03 Uhr
Seite 5
The display menu in your own language also makes it easier for
operators to quickly and easily perform tasks.
Log book function
All measurement sequences for a rotor are saved in a
central database so that if “problem cases” occur you
have access to a history of preceding steps, which often
points out the solution.
Upgrade old to new
The CAB 920 is ideally suited for modernising older
horizontal and vertical balancing machines – even
those of external makes. So that you upgrade
your existing balancing machine with state-of-the-art
measuring technology.
All information is clearly displayed: e.g. Plane 1
in components, plane 2 polar and veering in display.
Convenient touchscreen control
All communications between you and the measuring
system take place via the touch screen monitor. You
control all functions with your index finger and in this
way communicate with the balancing machine. Values
and texts are entered in dialog fields with the help of interactive direct input windows and no keyboard or
mouse is required.
Clear, easily understood dialogs
We place special value in clear dialogs in order to avoid
misinterpretations or incorrect input. Even when setting
up a rotor for the first time you will see how easy it is to
work with the CAB 920. This is made possible by clear
menu structures based on the work sequence and a
hierarchical layout of the functions.
Fast unbalance detection
After the measuring run it is your aim to quickly and reliably assess the rotor. The unbalance visualisation with
vector displays has proven ideal for this. Together with
the numerical displays, you can detect the precise location and size of the unbalance at a glance.
eMode – The key to easy balancing
eMode simplifies the controls of the balancing machine
to two sides of dialog: Input of the rotor data and the
results module with balancing instruction. Additional
functions like automatic determination of the balance
speed or calculation of the balance tolerances to
ISO 1940 makes balancing easy with the CAB 920. All
standard balancing methods, e.g. drilling, milling
or attaching weights are supported.
Networking ensures information flow
CAB 920 can be easily integrated in your company network. You can exchange the balancing results electronically with colleagues in the quality assurance department and can then further process these with standard
office programs. It also enables online remote diagnosis
with extensive service functions.
Individual assignment of the function keys
Some of the function keys can be individually assigned.
You can therefore directly call up frequently used functions and achieve a perfectly balanced rotor even faster.
Balancing protocol with integration of graphic elements
With the balancing protocol you can document the
balancing of each rotor in detail and have an overview
of the stored type and calibration data. You can individually change it to your own requirements and integrate
graphic elements, such as your company logo or even
photos of the balanced rotor.
By marking the measured value
and averaging over several runs, it
is possible to correct the unbalance
behaviour of unstable rotors.
The operator can even display
the angle and amount of
unbalance when balancing
elastic rotors in three planes.
A clear user dialog makes entering a new
rotor type child's play in the eMode.
The unbalance effect of an
elastic rotor can be measured during the startup
and displayed versus
speed in a Bode diagram.
Clear vectorial and numerical display of
the unbalance with coloured
marking when the tolerance is reached.
Calculating the unbalance tolerances to the current DIN ISO 1940
Different tolerance specifications for static and dynamic
unbalance can be displayed on one screen.
The measured values for an elastic rotor can
be saved for both planes during the startup and
displayed as a Nyquist diagram.
rz_brosch_cab920_en_0706.qxd
02.08.2006
14:03 Uhr
Seite 5
The display menu in your own language also makes it easier for
operators to quickly and easily perform tasks.
Log book function
All measurement sequences for a rotor are saved in a
central database so that if “problem cases” occur you
have access to a history of preceding steps, which often
points out the solution.
Upgrade old to new
The CAB 920 is ideally suited for modernising older
horizontal and vertical balancing machines – even
those of external makes. So that you upgrade
your existing balancing machine with state-of-the-art
measuring technology.
All information is clearly displayed: e.g. Plane 1
in components, plane 2 polar and veering in display.
Convenient touchscreen control
All communications between you and the measuring
system take place via the touch screen monitor. You
control all functions with your index finger and in this
way communicate with the balancing machine. Values
and texts are entered in dialog fields with the help of interactive direct input windows and no keyboard or
mouse is required.
Clear, easily understood dialogs
We place special value in clear dialogs in order to avoid
misinterpretations or incorrect input. Even when setting
up a rotor for the first time you will see how easy it is to
work with the CAB 920. This is made possible by clear
menu structures based on the work sequence and a
hierarchical layout of the functions.
Fast unbalance detection
After the measuring run it is your aim to quickly and reliably assess the rotor. The unbalance visualisation with
vector displays has proven ideal for this. Together with
the numerical displays, you can detect the precise location and size of the unbalance at a glance.
eMode – The key to easy balancing
eMode simplifies the controls of the balancing machine
to two sides of dialog: Input of the rotor data and the
results module with balancing instruction. Additional
functions like automatic determination of the balance
speed or calculation of the balance tolerances to
ISO 1940 makes balancing easy with the CAB 920. All
standard balancing methods, e.g. drilling, milling
or attaching weights are supported.
Networking ensures information flow
CAB 920 can be easily integrated in your company network. You can exchange the balancing results electronically with colleagues in the quality assurance department and can then further process these with standard
office programs. It also enables online remote diagnosis
with extensive service functions.
Individual assignment of the function keys
Some of the function keys can be individually assigned.
You can therefore directly call up frequently used functions and achieve a perfectly balanced rotor even faster.
Balancing protocol with integration of graphic elements
With the balancing protocol you can document the
balancing of each rotor in detail and have an overview
of the stored type and calibration data. You can individually change it to your own requirements and integrate
graphic elements, such as your company logo or even
photos of the balanced rotor.
By marking the measured value
and averaging over several runs, it
is possible to correct the unbalance
behaviour of unstable rotors.
The operator can even display
the angle and amount of
unbalance when balancing
elastic rotors in three planes.
A clear user dialog makes entering a new
rotor type child's play in the eMode.
The unbalance effect of an
elastic rotor can be measured during the startup
and displayed versus
speed in a Bode diagram.
Clear vectorial and numerical display of
the unbalance with coloured
marking when the tolerance is reached.
Calculating the unbalance tolerances to the current DIN ISO 1940
Different tolerance specifications for static and dynamic
unbalance can be displayed on one screen.
The measured values for an elastic rotor can
be saved for both planes during the startup and
displayed as a Nyquist diagram.
rz_brosch_cab920_en_0706.qxd
02.08.2006
14:03 Uhr
Seite 2
Use:
Basic system:
Function:
Display:
Input:
Measuring methods:
Unbalance measuring range:
Speed range:
Data storage:
Interfaces:
Options:
Universal for horizontal or vertical balancing machines, hard- or soft bearing
Modular and service friendly design with measurement, analysis and display units. Data processing
and calculation via integrated industrial PC with Schenck Computer Aided Balancing software
– Vector and numeric display
– Measure dynamic unbalance in 2 planes, the static unbalance and the couple unbalance
– Automatic tolerance comparison
– Display of polar or in equally / non-equally distributed components
– Averaging of the measured values over time, rotor type related
– Tolerance calculation according to ISO 1940
– Balancing protocol in PDF format
– Conversion to other setup data
– Single compensation, key compensation, index balancing
– Drive control for automatic measuring cycle
– Definition and storing of type-related balancing procedures for simplification
of complex work sequences
– Context-sensitive help function, automatic self-test
– Monitoring measuring signals
Active 15“ TFT colour display with high luminosity
Context dependent assignment of function keys, touchscreen
Efficient, fully digital measured data processing for highest measurement accuracy
1 : 2,000,000
100 to 5,000 rpm , optional up to 100,000 rpm
Dependent on the size of the storage medium, practically unlimited
– USB for peripherals
– Frontside USB for data export to storage media, etc.
– Network interface for data backup, ethernet
– Protocol printer
– Marking measured values, averaging over runs
– Angle indexing indicator
– Extensive balancing software e.g. for drilling, milling, setting weights
– Overlapping cycle
– Rotor specific calibration
– Alternating operation of 2 balancing machines with one measuring unit
– Measured value recording and storage during startup
– Vibration velocity measuring mode with single and double (2f) reference frequency
– Bode- and Nyquist-diagram
– Additional measurement channels for runout measurement, etc.
– Statistical software
– Industry-specific solutions for
– the roller industry: Laser scanning, special report, 3-plane display, etc.
– Propshaft industry: up to 4 planes in parallel, permanent or rotor-specific calibration, compensation of reactive forces
– Aviation industry: Averaging over runs, weight distribution, nesting
CAB 920 – The perfect combination of simplicity and performance
The new CAB 920 is the latest development of the legendary Computer Aided Balancing (CAB) measuring systems
from Schenck. By combining the most powerful instrumentation features available with an unsurpassed level of
simplicity, the CAB 920 creates a new balancing standard for any application. You’ll find it easy to significantly improve your balancing results whether performing simple balancing tasks or the most complex balancing procedures.
Simple to use – the key to more security
Balancing and
Diagnostic Systems
SCHENCK RoTec GmbH
Landwehrstraße 55
D-64293 Darmstadt
www.schenck-rotec.com
eMail: [email protected]
Phone: +49 (0) 6151 - 32 23 11
Fax: +49 (0) 6151 - 32 23 15
RC 1034 -1e · 10.0806 · BESP · D.O.G. All information without obligation. Subjects to change without notice
Technical specifications
CAB 920 – The measuring system for peak balancing performance
RC 1034 -1 e