coldform endwall erection manual
Transcription
coldform endwall erection manual
877-2-MUELLER www.MuellerInc.com 18x21 BACK YARD KIT BLDG (BYK) COLDFORM ENDWALL ERECTION MANUAL Mueller BYK buildings do not meet any specific code or engineering criteria. These buildings are intended to be erected in geographical locations which do not require engineered loads for buildings under 400 sq. ft. Mueller, Inc. 1913 Hutchins Ave. Ballinger, TX 76821 BLDG SIZE: 18'-0" x 21'-0" 8'-0" www.muellerinc.com 877-2-MUELLER ========================================================================================== FRAME Qty. Length Mark/Punch Material ========================================================================================== .......................................................................................... 2 , 21'- 0" , Purlin 4X2C14I .......................................................................................... 7 , 18'- 0" , BOT PURLIN 4X2C14I .......................................................................................... 2 , 18'- 0" , TOP PURLIN 4X2C14I .......................................................................................... 2 , 18'- 0" , FLR PURLIN 4X2C14I (Only with purchase of floor kit) .......................................................................................... 2 , 21'- 0" , BOT CHAN 4CH16 .......................................................................................... 2 , 21'- 0" , TOP CHAN 4CH16 .......................................................................................... 4 , 7'- 6" , Column 4X2C14I .......................................................................................... 1 , 18'- 0" , CNTR RFTR 4X2C14I .......................................................................................... 2 , 6'- 1" , CAP CHAN 82CH14 .......................................................................................... 2 , 21'- 0" , Purlin2 82CH14 .......................................................................................... 225 , 1" , A307 Bolts F.5X1.00 F.5X1.00 .......................................................................................... 38 , 7 1/2" MKB1 MiniKit- Plt -----------------------------------------------------------------------------------------=========================================================================================== ROOF & WALL SHEETING Item Qty. Description Material Length =========================================================================================== 29435, 14, Roof Sheet, UPN 26GA #1 3.22' RUN, 8'- 10" 29435, 2, L_EW Sheet, UPN 26GA #1 3.22' RUN, 8'- 1 1/2" 29435, 2, L_EW Sheet, UPN 26GA #1 3.22' RUN, 8'- 4 1/2" 29435, 2, L_EW Sheet, UPN 26GA #1 3.22' RUN, 1'- 11" 29435, 2, R_EW Sheet, UPN 26GA #1 3.22' RUN, 8'- 1 1/2" 29435, 2, R_EW Sheet, UPN 26GA #1 3.22' RUN, 8'- 4 1/2" 29435, 2, R_EW Sheet, UPN 26GA #1 3.22' RUN, 8'- 7 1/2" 29435, 7, F_SW Sheet, UPN 26GA #1 3.22' RUN, 8'- 1 1/2" 29435, 7, B_SW Sheet, UPN 26GA #1 3.22' RUN, 8'- 1 1/2" ------------------------------------------------------------------------------------------- Mueller, Inc. 1913 Hutchins Ave. Ballinger, TX 76821 BLDG SIZE: 18'-0" x 21'-0" 8'-0" www.muellerinc.com 877-2-MUELLER =========================================================================================== TRIM Item Qty. Part Description Length =========================================================================================== 44094, 4, #0150, O.S. CNR UPN #0150 MFG, 8'- 1", ........................................................................................... 53810, 4, #0801, EAVE WHT #0801 MFG, 10'- 9", ........................................................................................... 53844, 2, #1700, MNB OS RAKE #1700 MFG, 18'- 7 3/4", ........................................................................................... 44122, 2, #0320, MNB UPN JAMB #0360 MFG, 6'- 9", ........................................................................................... 44122, 1, #0320, MNB UPN HEAD #0320 MFG, 6'- 0", ........................................................................................... 54092, 1, #1702, MNB RUD FLASHING #1702 MFG, 5'- 9 3/4" ------------------------------------------------------------------------------------------=========================================================================================== FASTENERS Item Qty. Part Description Length =========================================================================================== 54211, 2, SKYLITE , SKYLITE 24" x 12'-6 6 OZ., 12'- 6" ........................................................................................... 20243, 1, NUTSTER, 5/16" NUTSETTER, 0'- 2" ........................................................................................... 20445, 2, SEALTAPE, 50' 1/2 X 3/32 TAPE GULF STATE, 50'- 0" ........................................................................................... 21485, 38, CLOS_R_I, INSIDE CLOSURE STRIP U PANEL, 3'- 0" ........................................................................................... 21486, 26, CLOS_R_O, OUTSIDE CLOSURE STRIP U PANEL, 3'- 0" ........................................................................................... 54187, 1, CLOS_R_O, 5' FOAM CLOSURE 1" x 1", 5'- 0" ........................................................................................... 9304, 500, TEK, TEK #12 3/4" , 0'- 3/4" ........................................................................................... 9425, 250, LAPTEK, LAP TEK , 0'- 3/4" ........................................................................................... 9431, 250, LAPTEK, LAP TEK , 0'- 3/4" ........................................................................................... 54086, 1, RUD, 5'- 9 1/2" x 6-5" RUD, 7'- 0" ........................................................................................... 38480, 12, PLYWOOD, PLYWOOD 3/4" 4' X 8' CDX (WOOD FOR FLOOR KIT), 8'- 0" ........................................................................................... 36218, 1, BIT, #2 PHILLIPS POWER BIT 1/4" HEX 2 3/4" OVERALL, 0'- 2 3/4" ........................................................................................... 28274, 250, SDSCREWS, SELF DRILL # 10 1 5/8" PHILLIPS, 0'- 1 7/16" ........................................................................................... ------------------------------------------------------------------------------------------- TRIM PAGE 36" 10" LAP SCREW BUTYLTAPE UPN-PANEL 12" 2" TEK SCREW BACK SIDE VIEW X Foam Closure Y X & Y Dimensions are located further in the instructions Foam Closure CORNER TRIM To avoid leaking place sealer tape between roof sheets only. 12" VE EA IM TR HE AD ER JT RI M COLUMN J-TRIM DOOR DOOR SHOULD BE LOWER THAN BOTTOM OF TRIM DETAIL K JT RI M J TRIM J TRIM DOOR JAMB DOOR J-TRIM NOTE FOR DOOR SIDE SHEETING ONLY: START SHEET FLUSH WITH J-TRIM ON BOTH SIDES OF DOOR 36" 10" To avoid leaking place sealer tape between roof sheets only. LAP SCREW 12" 12" 2" BUTYLTAPE TEK SCREW UPN-PANEL SKY LIGHT Foam Closure V EA E IM TR FOAM CLOSURE ROOF PANEL TEK SCREW SIDE VIEW Z CUT IN MIDDLE "Z" Dimensions can be found Later in the instructions Door Trim For Double-Walk Doors Only Door Trim 2" Place the door trim 2" from the outside edge of the hinge. Door Trim Door Trim 1" 3 4" START SHEET 3/4" PAST THE END OF THE FRAME AND 1" FROM THE BOTTOM OF BASE A DETAIL A T BO AN CH T BO N HA TC O B BO Step 1 T BO C DETAIL B TP UR L AN CH BO T BO T PU RL IN PU RL IN IN N HA TC O B N HA BO TP UR L IN Step 2 T BO BO TP AN CH UR LIN Note: Leading and trailing edges of channel and purlin are over bent for a tight fit. Spread apart as needed to nest the purlin into the channel. MAKE SURE THE ASSEMBLY IS SQUARE. ASSEMBLY IS SQUARE WHEN THE CORNER TO CORNER MEASUREMENTS ARE EQUAL. USE TEMPORARY BRACING TO HOLD ASSEMBLY SQUARE IF REQUIRED, TEMPORARY BRACING IS NOT INCLUDED. COLUMN COLUMN COLUMN COLUMN DETAIL C DETAIL D COLUMN COLUMN Place one bolt to the inside as shown DETAIL E E TO PP TO PP TO PP UR LIN UR LIN UR LIN MAKE SURE THE ASSEMBLY IS SQUARE. ASSEMBLY IS SQUARE WHEN THE CORNER TO CORNER MEASUREMENTS ARE EQUAL. USE TEMPORARY BRACING TO HOLD ASSEMBLY SQUARE IF REQUIRED, TEMPORARY BRACING IS NOT INCLUDED. F PC TO TO PP N HA UR LIN DETAIL F N HA PC O T TO PP UR LIN TO PP UR LIN AN CH P TO DETAIL H DETAIL G H G H MAKE SURE THE ASSEMBLY IS SQUARE. ASSEMBLY IS SQUARE WHEN THE CORNER TO CORNER MEASUREMENTS ARE EQUAL. USE TEMPORARY BRACING TO HOLD ASSEMBLY SQUARE IF REQUIRED, TEMPORARY BRACING IS NOT INCLUDED. Detail J J DETAIL K K PU RL IN TO PP TO PP PU RL IN UR LIN UR LIN K BO TP BO TP UR LIN UR LIN DETAIL L IN RL PU TO PP 1 TO PP UR LIN UR LIN IN RL PU 1 L IN RL PU 1 DETAIL K R PU LIN 1O R2 TO TO PP UR PP UR LIN LIN R PU LIN 1 PU K RL 2 IN R PU K LIN 2 K R PU K LIN 1 N CA PC HA NN EL DETAIL N N CA PC HA NN EL CA P CH AN N EL DETAIL O O NOTE: IF A FLOOR KIT WAS PURCHASED PLEASE ADD THE KIT PRIOR TO SHEETING. THE INSTRUCTIONS FOR THE FLOOR KIT CAN BE FOUND ON P.23 & P.24 DETAIL Q Q HE AD ER HE AD ER Note: Attach The MKB1 Clip To The Header Header Then Attach The Header To The Column DETAIL S BACK SIDE VIEW S JT DETAIL T RIM R J TRIM T J TRIM 3 4" 1" HE AD ER JT RI M J TRIM JT RI M J TRIM START SHEET 3/4" PAST THE END OF THE FRAME AND 1" FROM THE BOTTOM OF BASE COLUMN DETAIL R BACK SIDE VIEW DETAIL T T 3 4" 1" START SHEET 3/4" PAST THE END OF THE FRAME AND 1" FROM THE BOTTOM OF BASE CORNER TRIM CORNER TRIM CORNER TRIM CORNER TRIM DETAIL U U 36" 10" VE EA T M RI To avoid leaking place sealer tape between roof sheets only. LAP SCREW 12" 12" 2" BUTYLTAPE TEK SCREW UPN-PANEL DETAIL V V SIDE VIEW 2 12" NOTE: ROOF SHEET IS DESIGNED TO HAVE A 2 12" OVERHANG VE EA IM TR W CUT LINE CUT LINE DETAIL W SKY LIGHT FOAM CLOSURE ROOF PANEL TEK SCREW DETAIL X X FOR KITS SOLD WITH A FLOOR KIT ONLY FOR KITS SOLD WITH A FLOOR KIT ONLY Y DETAIL Y 2 'X 8' 4'X 8' 2'X 8' 4'X 8' 4'X 2'X 8' 4'X 8' 8' 4'X 8' 4'X 8' 4'X 8' 4'X 8' NO TC 4'X 8' HF OR DO OR 1'X 4' 4 'X 8' 1'X 4' FRAMED OPENING IS 5'-10"x6'-5" WHEN INSTALLED PROPERLY THE OPEN HEIGHT OF THE DOOR IS 6'-1" 8'-2" 8'-11" 6'-5" KIT COMES WITH A MUELLER 5'-9 21"x 6'-5" M250 ROLL UP DOOR 5'-10"