ISLANDFLEXTEC MOULDINGS T.C.I.
Transcription
ISLANDFLEXTEC MOULDINGS T.C.I.
ISLANDFLEXTEC MOULDINGS T.C.I. Dennis Kam. ENVIROTECH Business Park Road.Providenciales, Turks & Caicos islands. British West Indies. tel:649-242-6182 Email: [email protected], [email protected] Island Flextec Mouldings T.C.I. is a leader in the design and manufacture of architectural detail and mouldings. Manufactured in standard or custom shapes the polystyrene profiles reinforced with a Fiber Mesh, and coated with Polymer-Modified Cement. The profiles are dimensionally stable and designed for interior and exterior applications. Island Flextec Mouldings T.C.I. is made up of a team of skilled and dedicated people committed to excellence in the design and manufacture of your architectural decorative details and mouldings. The wide variety of finishes, shapes and sizes, as well as our commitment to constant improvements in our products and service guarantees we will incorporate the best to meet the requirements of your project. Design and Flexibility Island Flextec Mouldings T.C.I. products are available in wide variety of shapes and sizes including trims, sills, cornices and columns or we can customize to meet your particular requirements. Ease of installation and Maintenance Island Flextec Mouldings T.C.I. products are lightweight and easy to instal, dimensionally stable and moisture resistant, they are durable, do not require any special maintenance and will stand the test of time. All at a competitive cost Island Flextec Mouldings T.C.I. products provide both strength and flexibility at a fraction of the cost pre-cast and framed applications. Island Flextec Mouldings T.C.I. comprehensive product offering will en change the architectural, decorative appeal of any project and our experienced design staff is available to add technical assistance to your custom application. How it is installed? Mouldings may be applied directly to concrete, stucco, wood and other similar surfaces. Adhesives are used to hold the moulding in place. When the moulding is too heavy, fasteners are used to temporarily hold the moulding in place until the adhesive has time to dry. See our Installation guidelines for more details or call for technical support. Dennis Kam. ENVIROTECH Business Park Road.Providenciales, Turks & Caicos islands. British West Indies. tel:649-242-6182 Email: [email protected], [email protected] ISLANDFLEXTEC MOULDINGS T.C.I. Dennis Kam. ENVIROTECH Business Park Road.Providenciales, Turks & Caicos islands. British West Indies. tel:649-242-6182 Email: [email protected], [email protected] FAQ’s What is EPS? Expanded Polystyrene (EPS) is a rigid, closed cell, plastic foam material. EPS can be molded into a variety of shapes and sizes. EPS is typically available in large blocks that can be cut into sheeting, architectural detail work for use on houses and buildings, signage, floatation ect. It’s lightweight properties make it very easy to work with. Architectural EPS is modified with a fire retardant and is usually encapsulated with a acrylic-based finish. EPS is totally recyclable. EPS does not contain ozone depleting CFC’s or HCFC’s. What is Styrofoam? A common mus-understanding about Expanded Polystyrene (EPS) is that it is referred to by many people as Styrofoam. Styrofoam is actually a trademark for a product that is manufactured by DOW Chemical Company. Styrofoam board and EPS board have two completely different manufacturing processes. The most notable difference is that EPS does not and has never used CFC’s or HCFC’s, which are harmful to our ozone layer, for the processing of making rigid insulation. In producing the product, Styrofoam is and extruded foam board, whereas EPS is a molded cellular board. What is its use? Architectural (EPS) details are used on building exteriors to add ARCHITECTURAL DESIGNS, CHARM AND LUXURY. • What are the advantages: • Affordable, less costly than traditional methods • Structurally stable • Maintenance Free • Durable • Will not crack, peel or fade • Easy, fast assembly • Wide variety of shapes and sizes including trims, sills, cornices, columns and panels How do Island Flextec Mouldings T.C.I. architectural details differ from traditional wood mouldings? Shrinkage & Swelling Wood Readily shrinks and swells with changes in humidity Flextec Mouldings Minimal Flame Spread Flame spread rating greater or Flame spread rating is 60 or eqial to 100 less Forming Rot & Insect damage Multiple pieces of wood and multiple mill-work are required to achieve desired profile Readily affected by water and subject to damage Readily Affected Strength and flexibility Relatively easy to crack Water damage State-of-the-art CAD driven technology generates profile in one piece Does not rot Not susceptible to rot or insect attack if installed as per our installation guidelines Excellent overall strength