Waterproofing

Transcription

Waterproofing

PARCHEM
CONSTRUCTION
SUPPLIES
WATERPROOFING PRODUCTS
T HE L E A D I N G CHO I CE F O R T HE WATERPROOFIN G
IN D U S T R Y I N A USTR AL I A
WATERPROOFING
PRODUCT SPECIALISTS
Reliable waterproofing is essential to ensure the longevity of any structure by
preventing water ingress from causing damage and creating expensive repairs.
Waterproofing proves to be a cost effective investment when compared to the cost
of repairing water damage.
®
Parchem’s waterproofing product range has been specifically chosen from leading
brands all designed to meet the harsh demands of Australian conditions. The
broad range of technologies allows customers a choice of the right product for
the situation - products that are suitable for permanent water immersion, traffic,
all weather conditions, accommodate crack movements and application to a wide
variety of substrates.
Applications from the smallest bathroom to the roof deck including balconies,
basement tanking, tunnels, roof gardens, car parks, landscape areas, planter
boxes, retaining walls, swimming pools, bunds, culverts, water tanks and water
treatment plants.
TILE ADHESIVE
architectural Protective
waterproof coating
Emer-Proof Tilebond Flex
Emer-Clad Waterproofing
A premium grade rubber modified, flexible off-white cement based ceramic tile
adhesive that complies with AS 2358:1990.
A water borne single component elastomeric acrylic membrane which is easily
applied by brush or roller and is water clean-up. Suitable for internal or external
applications. With over 30 years proven performance Emer-Clad is a generic
in the industry.
Tilebond Flex forms a wet area system with Emer-Proof Under Tile, Emer-Proof
EcoSeal and Emer-Proof 750.
2 I Parchem Construction Supplies Pty Ltd
(ABN 80 069 961 968)
LIQUID MEMBRANES
Liquid waterproofing
Membranes are ideal for the
following:
Planter boxes
Balconies, terraces and decks
Bathrooms and wet areas
Retaining walls
Water tanks
Emer-Proof under tile
Emer-Proof ecoflex
Fibre enhanced single component water based SBR hybrid polyurethane
membrane
High performance water based rubberised bitumen waterproofing membrane
Emer-Proof ecoseal
Emer-Proof ecoflex anti-root
Polymer modified bitumen liquid coating with plant root inhibitors
Next generation solvent free polyurethane membrane
Emer-Proof QUICK DRY 2 PART
Water based, fast drying, flexible two component, polymer modified
cementitious waterproofing membrane
Emer-Proof elastic JOINT BAND system
Superior sealing system for critical joint areas over traditional bond-breaking
sealants and tapes
Emer-Proof 750
Emer-Proof multi purpose primer & wp
additive
High performance, tough, flexible, polyurethane waterproofing membrane, for
internal and external under tile areas
SBR latex primer & waterproofing additive
Emer-Proof top coat
Water based acrylic hybrid membrane top coat for UV exposed applications
Emer-Proof extended wear clear coat
Solvent free aliphatic polyurethane clear sealer
Emer-Proof non-porous primer
Water-based solvent free primer for non-porous substrates
Emer-Proof Aqua-Barrier
Water borne epoxy membrane / barrier for porous surfaces.
Waterproofing Products I 3
Self adhesive
Sheet MEMBRANES
Self adhesive membranes allows installation without the use
of heating torches and their associated problems. The uniform
thickness eliminates any likelihood of thin application commonly
found with liquid applied membranes.
Self Adhesive sheet membranes are ideal for the following:
Tunnels
Foundations
Basements
Retaining walls
Bridge decks
Ramps
Car parks & road pavements where the membrane will
be overlaid with hot asphalt
Emer-Proof HDPE
Emer-Proof HD
Contains a cross laminated HDPE film that ensures excellent dimensional
stability while allowing adequate flexibility during installation and service.
Has a polypropylene mesh for extra strength, puncture resistance, and
dimensional stability. Designed to be over laid with hot asphalt.
Index Mineral Design
Index Testudo
(ABN 80 069 961 968)
Torch-on Sheet
MEMBRANES
Torch on sheet membranes are ideal for the following:
Roof and podium decks
Water Retaining Structures
Balconies
INDEX Argo
A 3 mm thick, plastomeric, torch-applied membrane, reinforced with polyester
and stabilised with fibre glass mat, for single or multi layer systems.
INDEX AUTOTENE ASFALTICO (bridge deck
membrane)
Retaining Walls
Planter boxes
Landscape areas and green roofs
Lift pits
Car parks and bridges (under asphalt)
A self-adhesive, heat activated bridge deck membrane in elastoplastomeric
polymer bitumen. Used for cold-state waterproofing of bridges and car park
surfaces to be paved with hot bitumen or ashphalt.
INDEX Autotene base p (heat activated)
INDEX Proteaduo/P - SBS/APP
Thermally self adhesive 3 mm thick waterproofing base sheet membrane.
High performance 4 mm thick torch applied waterproofing membrane with
multilayer composite polymer bitumen and reinforcement.
INDEX Defend H (Anti-Root)
A torch-on anti-root membrane specially designed to be plant root resistant.
The special additive in the polymer formulation is not harmful to plants but
stops plant and tree root damage to the membrane in planters and roof-top
gardens.
INDEX Fidia plain & FIDIA MINERAL
An elastomeric, torch applied membrane, reinforced with rot-proof non-woven
polyester and stabilised with glass mat.
INDEX mineral design - checker board
A waterproofing membrane self-protected with ceramic mineral granules
in red and grey, created in a checker board pattern, for the decoration and
development of “Design” roofs. Reinforced with a“non-woven” polyester fabric
stabilized with fibreglass mat which guarantees stability in hot conditions, while
in cold conditions it behaves like a sheet reinforced with pure polyester.
INDEX Modo
3.5 mm thick, elastoplastomeric, torch-applied, reinforced with polyester and
stabilised with fibre glass matt membrane, for single or multi layer systems.
INDEX Rollbase (vent sheet)
Polyester fabric backed base sheet, for heat sensitive substrates, in multi-layer
torch-on membrane systems.
INDEX Testudo 30 (bridge deck membrane)
Torch applied 5 mm thick high performance reinforced elastoplastomeric
polymer – bitumen bridge deck waterproofing membrane.
INDEX Testudo plain & MINERAL
A maximum performance, 4 mm thickness, torch-on polymer modified bitumen
waterproofing sheet membrane with polyester reinforcing to give dimensional
stability. Testudo is also available in mineral chip finish for improved UV
resistance and visual appeal.
INDEX Vapordiffuser (vent sheet)
Elastoplastomeric membrane with deep bitumen underside rivets, to allow
water vapour to diffuse and provide waterproofing in the base layer in multilayer systems.
Pre-applied
MEMBRANES
Proofex Engage is a unique patented waterproofing membrane
for a range of waterproofing applications including basements
and substructures.
Proofex Engage
Pre-applied waterproofing membrane which mechanically bonds to poured
concrete. It provides water vapour and gas protection to water excluding
structures and protects concrete from aggressive ground salts and chemicals.
drainage and protection
Torch on accessories
Without proper protection, the waterproofing in a building can fail, leading to costly
and unnecessary repairs. All below ground waterproofing should be protected prior
to back-filling to stop the membrane being punctured or damaged. Using a suitable
protection/drainage system will not only protect the membrane but also assist the
surrounding soil to drain correctly and minimise any water pressure build-up.

External bituminous corner

Internal bituminous corner

One Way Vents

Parapete drain outlet - boy type
Emer-Proof Drain V

Pressure Seal Flashing

Pipe sealing - detailing collar

Roof drain (dropper)

Torch on bituminous fillet

Torch on domed grate 60 - 120mm

Torch on guns

Helasto-ring
Dimpled protection and drainage membrane in high-density extruded polyethylene
with continuous filament yarn.
EMER-PROOF IMPRABOARD
Emer-Proof Impraboard is a polypropylene, impact resistant membrane protection
board. Emer-Proof Impraboard provides protection for all of the Parchem range of
waterproofing membranes.
EMER-PROOF geotex
Non-woven fabric in needle-punched polyester for the drainage of construction
works.
(ABN 80 069 961 968)
Cementitious
MEMBRANES
Cementitious waterproofing membranes are ideal
for the following:
New and existing
buildings
Below ground slabs and walls
Lift pits
Swimming pools
Water tanks
Infrastructure
Drinking water structures
Water filtration plants
Sewerage treatment plants and
sewers
Vandex Concrete Grey
Vandex Uni Mortar 1-Z
Concrete capillary penetrating, crystal growth sealing, cement based,
waterproofing system for positive and negative water pressure applications.
Cement based reprofiling and waterproofing repair mortar - 6 mm to 12 mm
thickness.
Vandex BB75-Z
Vandex Plug
Surface applied, cement based render, waterproofing barrier for positive and
negative water pressure applications.
Fast setting, cement based permanent mortar to plug running water leaks.
Vandex BB75E-Z
Vandex Construction Joint Tape
Waterproofing tape for construction joints and cracks.
High performance, crack accommodating, surface applied, cement based
render, waterproofing barrier for positive and negative water pressure
applications.
Vandex Cemelast
Flexible, surface applied, cement based render, waterproofing barrier for
positive and negative water pressure applications.
We’ve got
the gear
you need
0315
Customer Service 1300 737 787
National Head Office: 7 Lucca Road, Wyong NSW 2259 02 4350 5000
The range of products will vary by location so please contact your nearest store for the range of products in stock.
P: 1300 737 787 www.parchem.com.au