FATRAFOL-H

FATRAFOL-H
Waterproofing system for underground structures
Waterproofing membranes for underground structures FATRAFOL-H
Thickness (mm)
Width (mm)
m2 / roll
Colour
Fatrafol 803
•against earth humidity
•against defluent humidity
•against pressure water (from
thickness of 1.5mm)
•anti-radon insulation
0.6
0.8
1.0
1.5
2.0
1300
1300
1300
1300
1200
65
42
39
26
18
brown, ecru
Fatrafol 803/V
insulation of ground and underground buildings to pressure and
percolating water, anti-radon
insulation
1.0
1.5
2000
2000
60
40
brown, ecru
Stafol 914
against humidity and radon
0.8
1200
42
special black
Stafol 914/V
against humidity and radon
0.8
2000
70
special black
Ekoplast 806
against oil substances incl. petrol
and radon
1
1.5
1300
1300
39
26
black
Name
Application
FATRAFOL-H
Waterproofing system for underground structures
Fatrafol 803 | Fatrafol 813 | Ekoplast 806 | Stafol 914
WWW.FATRAFOL.CZ
WWW.FATRAFOL.CZ
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: [email protected], www.fatrafol.cz | www.fatra.cz
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: [email protected], www.fatrafol.cz | www.fatra.cz
FATRAFOL-H
FATRAFOL-H
Waterproofing system for underground structures
Waterproofing system for underground structures
The FATRAFOL-H waterproofing system is designed for use as a waterproofing coating to protect buildings against ground moisture,
underground pressure
water,
oil, somemembrane
other liquids
and radon.
AQUAPLAST
805 is a non
reinforced
on base
of plasticized polyvinylchloride (PVCP). Membrane is stabilized to UV radiation. It has very good chemical resistance to all waters occurring in nature without difference of volume of minerals and natural substanUse dissolved
FATRAFOL-H
ces
in to
it. create waterproofing coatings in all types of foundations of residential, public, administrative, industrial, agricultural, sports
and other buildings.
AQUAPLAST 805 is first of all identified for inlaying of garden ponds due to growing water plants. It hinders to the water leakage. Then
FATRAFOL-H
all environments
various levels
biological
and chemical
and applied
with constant
the
membraneis issuitable
suitableforfornearly
waterproofing
of ponds,with
fire reservoirs,
smallofwater
reservoirs,
irrigation aggressiveness
reservoirs, etc. The
memtemperatures from 20°C to +40°C. Fatra has, over the years, developed, refined and certified a comprehensive waterproofing sysbrane
is harmless for fish and water plants.
tem, ranging from the protection of membranes and various joining methods to supplementary products. The membrane also allows
for the creation of sufficiently tight penetrations through the waterproofing layer and other detailing to ensure it is consistently impermeable
by radon.
FEATURES AND ADVANTAGES
•
•
•
•
•
•
•
•
•
•
Great strength and elongation of membranes
Permanent resistance to pressure
Excellent weldability
Resistance to the effects of aggressive underground water
Elasticity and flexibility in cold weather conditions
Excellent resistance to perforation
Resistance to penetration by plant roots
Resistance to mechanical stress during the settlement of structures
Health and environmental friendliness
Reliable performance and long service life
EKOPLAST 806
EKOPLAST 806 is non reinforced membrane on base of plasticized polyvinylchloride (PVC-P).
EKOPLAST 806 is first of all identified for the waterproofing of objects determined for handling and temporary storage of selected petroleum
substances. It hinders leakage of petroleum substances into surface moisture and groundwater in the waterproofing system and simultaneously it fulfils a function of insulation being resistant to water and effects as an efficiency anti-radon barrier. It is suitable e.g. for sealing of handling
areas, emergency and leakage sumps against to leakage of gasoline, petroleum, diesel fuel and heating oil, furnace and transformer oils.
There is possible to use it for the waterproofing systems of buildings like an inbuilt membrane, only. It is not determined as an upper coating
layer and that is why it cannot be used for reservoir laying out due to store the petroleum substances for a longer time.
STAFOL 914
STAFOL 914 (914/V) is an unreinforced membrane on a base of plasticized polyvinylchloride (PVC-P). STAFOL 914 is produced by calendering
and lamination, STAFOL 914/V by a multi-extrusion processing. All the production variants are described by this Technical Data Sheet - further
like FATRAFOL 914, only.
STAFOL 914 is identified for waterproofing of buildings to ground humidity. It is suitable first of all for the waterproofing of flooring areas
of industrial trade and storage halls. Further the membrane can be used as a waterproofing of peripheral masonry to moisture capillarity like
there are new objects, then at waterproofing providing of old objects; for insulation in a high aggressive surrounding - like (occurrence of inorganic acids, alkalis and their salts), as a protective or separation layer in the flooring construction, etc.
The entire waterproofing coat made of mutual welded sheet bands fulfils simultaneously also a function of the efficient anti-radon barrier.
The membrane is not identified for the applications, where it will be directly exposed to the atmospheric influences (mainly UV-radiation)
for a long time; it cannot be used like a waterproofing to power water.
FATRAFOL 813
FATRAFOL 803
FATRAFOL 803 (803/V) is an unreinforced membrane on a base of plasticized polyvinylchloride (PVC-P). FATRAFOL 803 is produced
by calendering and lamination, FATRAFOL 803/V by a multi-extrusion processing.
FATRAFOL 803 is identified first of all for the waterproofing of ground and underground buildings to aggressive pressure and sucking water
and as a waterproofing layer of waterproofing systems to leakage of liquids and leaches into the ground waters.
The membrane is suitable for insulation of tunnels, ground tanks, reservoirs, agricultural buildings, water constructions and dispose
of industrial products, which chemical influence respond to the membrane resistance warranted by the producer. The applied membrane fulfils
also a function of anti-radon barrier within its waterproofed function.
The membrane is not identified for the direct contact with drinking water and for the applications due to long-life exposition to the atmospheric
influences, mostly UV-radiation.
Fatrafol 813 is a PVC-P based non-reinforced ground waterproofing membrane made by the process of multiple extrusion. FATRAFOL 813/V
and FATRAFOL 813/VS are available in black and high-visibility yellow-black respectively.
FATRAFOL 813 is primarily designed to waterproof ground and underground structures against pressure and intruding water. The membrane
may further be installed in wall structures to prevent the ingress of water in liquid state from one side of the wall to the other.
Its excellent chemical resistance makes FATRAFOL 813 suitable also for waterproofing load-bearing perimeter structures of storage tanks
for oil substances such as mineral oils and diesel.
WWW.FATRAFOL.CZ
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: [email protected], www.fatrafol.cz | www.fatra.cz
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: [email protected], www.fatrafol.cz | www.fatra.cz