Round Spectra-Lyte
Transcription
Round Spectra-Lyte
Round Spectra-Lyte The Complete Performance Package for Parking Garages COMPLETE PERFORMANCE PACKAGE The Round Spectra-Lyte is specifically designed for parking garage applications where low ceilings, wide fixture spacing and shallow viewing angles create unique lighting demands. Neither cutoff nor refractor type luminaires are completely suited to the challenges of parking garage lighting. With peak candlepower at high angles, sharp cutoff and a useful uplight component, the Round Spectra-Lyte responds to all of these demands. HEAVY DUTY DIE-CAST HOUSING Die-casting is the most precise, consistent method of molding aluminum. Finished in polyester powder paint, the Round Spectra-Lyte delivers the ultimate in durability for parking structures. IMPACT RESISTANT LENS The UV stabilized, high impact injection molded acrylic lens is enclosed and gasketed, keeping the optical system clean and at peak performance for years. A polycarbonate lens is available (150W and below) for vandal prone areas. A Dust-Tite (IP65) option is also available to provide added performance longevity in dirty environments. CONTROLLED UPLIGHT The Spectra-Lyte reflector system has an upper aperture that provides an evenly distributed uplight component. This eliminates eye strain and “cave effect” by enhancing uniformity between ceiling surfaces and the room cavity. DUAL REFLECTOR SYSTEM The main segmented anodized reflector controls light and shields the lamp to restrict glare. A secondary top reflector captures light from the top of the lamp and redirects it back into the primary reflector, creating the industry’s farthest throw and best spacing. UP TO 200W PULSE START With improved color rendition, higher lumens per watt and longer life, Pulse Start technology is ideally suited for parking structure lighting. The Round Spectra-Lyte accommodates a variety of Pulse Start lamps and wattages – and it’s UL Listed for up to 200 watts! Distribution Guide & Ballast Data(1) Source Type(2) Catalog Number RSPM-175 RSPM-150 MH RSPM-100 RSPM-70 RSPP-200 PS RSPP-175 RSPS-150 HPS RSPS-100 RSPS-70 Lamp Distribution(3) Envelope S A S A S A S A S A S A S A S A S A B/ED-17 B/ED-17 B/ED-17 B/ED-17 B/ED-17 B/ED-17 B/ED-17 B/ED-17 B/ED-17 % Uplight SP/MH .ies File Name 12.3% 14.6% 12.3% 15.0% 12.3% 14.6% 12.3% 14.6% 12.3% 14.6% 12.3% 14.6% 21.9% 15.0% 21.9% 15.0% 21.9% 15.0% 5 5.6 5 5.6 5 5.6 5 5.6 5 5.6 5 5.6 6 6.5 6 6.5 6 6.5 rspm17s.ies rspm17a.ies rspm15s.ies rspm15a.ies rspm10s.ies rspm10a.ies rspm70s.ies rspm70a.ies rspp20s.ies rspp20a.ies rspp17s.ies rspp17a.ies rsps15s.ies rsps15a.ies rsps10s.ies rsps10a.ies rsps70s.ies rsps70a.ies Notes: (1) The Round Spectra-Lyte Series can accommodate a variety of other wattage, lamp and ballast combinations. Please consult factory with specific requirements. (2) MH = Metal Halide, PS = Pulse Start Metal Halide, HPS = High Pressure Sodium. (3) Distribution: S = symmetric, A = asymmetric. www.wide-lite.com Ballast Type(4) CWA Line Current(5) Line ANSI Code 120/208/240/277/480 Watts M57/M107 HX-HPF M102/M142 HX-HPF M90/M140 HX-HPF M98 SCWA M136 SCWA M137/M152 HX-HPF S55 HX-HPF S54 HX-HPF S62 1.8/1.1/0.9/ 0.8/0.51 3.7/2.1/1.8/ 1.6/1.0 1.8/1.04/0.09/ .078/0.47 1.8/1.04/0.09/ .078/0.48 2.0/1.2/1.0/ 0.9/0.5 1.8/1.1/0.9/ 0.78/0.5 3.0/1.65/1.45/ 1.25/0.72 1.14/0.66/0.57/ 0.49/0.28 0.9/0.5/0.44/ 0.36/0.20 210 185 129 90 232 220 188 128 94 (4) CWA = Constant Wattage Autotransformer, HX-HPF = High Reactance, SCWA = Super Constant Wattage Autotransformer (Pulse Start). Consult factory for other ballast types. (5) 208V, 240V, 480V, QV and 5T units are available. Consult factory or ballast catalog for line current information. Wide-Lite • P.O. Box 606 • San Marcos, Texas 78667-0606 • (512) 392-5821 • Fax (512) 753-1122 Round Spectra-Lyte PRECISE CONTROL The Round Spectra-Lyte produces a Type V Round pattern with peak output at high angles yielding high horizontal and vertical footcandles. This stateof-the-art optical design creates superb uniformity, wide spacing ratios and, ultimately, the most efficient garage lighting distribution on the market today. SUPERIOR SHIELDING Spectra-Lyte’s dropped lens reflector assembly encompasses the lamp with its primary reflector. This allows the lamp output to be utilized most efficiently while providing shielding at the shallow angles necessary to meet IES Cutoff criteria. Therefore, even at very low mounting heights, low glare and high levels of visual comfort are achieved. Uplight fills ceiling surfaces Cutoff zone Cutoff above 70° LER & Cost of Light Catalog Number RSPM-175 RSPM-150 RSPM-100 RSPM-70 RSPP-200 RSPP-175 RSPS-150 RSPS-100 RSPS-70 Distribution LER(1) Cost of Light(2) S A S A S A S A S A S A S A S A S A 53 48 50 45 48 44 41 37 48 60 63 57 62 55 54 48 49 44 $4.55 $5.00 $4.83 $5.29 $4.99 $5.43 $5.91 $6.45 $5.03 $4.01 $3.86 $4.21 $3.86 $4.34 $4.43 $4.97 $4.91 $5.51 Lamp Lumen Output 15000 12500 8500 5000 BI-LEVEL® The Round Spectra-Lyte’s Bi-Level® option will significantly reduce energy costs without sacrificing safety or performance. Bi-Level® can be manually controlled or switched automatically with occupancy detectors, photocells, time clocks, loop sensors or building management systems. 21000 17500 16000 9500 6300 (1) LER = Luminaire Efficacy Rating. Calculated in accordance with NEMA Standard LE-5B. (2) Yearly cost of 1000 lumens, 3000 hours at $0.08. www.wide-lite.com Wide-Lite • P.O. Box 606 • San Marcos, Texas 78667-0606 • (512) 392-5821 • Fax (512) 753-1122 AUXILIARY RESTRIKE SYSTEMS Lighting is universally considered to be the most important safety and security feature in a parking facility–deterring crime and producing a safe and secure atmosphere. Even in the best designed systems however, regular start-up, momentary power interruptions, line voltage dips, low ambient temperatures and lamp outages can cause a temporary reduction in illumination and conditions in which safety and security could be compromised. For added assurance, the Round Spectra-Lyte eliminates these concerns with the addition of Wide-Lite’s optional “LiteMatic” restrike system. Unlike standard current sensing systems, WideLite incorporates solid state circuitry that goes one step further. Rather than react strictly to line current, Litematic operation monitors the HID lamp’s current draw to determine when the auxiliary lamp is needed. If the main arc is interrupted for any reason, the auxiliary lamp energizes until the main lamp restrikes and reaches 40% light output. This means as long as supply voltage is present, LiteMatic will always assure usable light from either the main or auxiliary lamp. EASE OF INSTALLATION Since the lamp is factory installed, the need to open the fixture during wiring and installation is eliminated. In addition, the Round SpectraLyte is shipped standard with an Easy Hanger Plate. This feature not only provides unequalled mounting flexibility (shown below), but also assists the installer by fully supporting the luminaire during wiring. Recessed Box (Box by others) Surface Mounted Box (Box by others) litematic operation Pendant Mounted Box (Box by others, rigid pendant length must be 12” or Less) LF LQ Normal start: When Main Lamp Reaches Main and auxiliary 40% of Rated Output: lamps both energized. Auxiliary lamp automatically extinguishes (combined main and auxiliary lamp current never exceeds operating current of main lamp at 100% output). When Arc Extinguished: Auxiliary lamp automatically energized when power is restored. When Main Lamp Reaches 40% of Rated Output: Auxiliary lamp automatically extinguishes. AUXILIARY LAMP OPTIONS LQ/LF Provides LiteMatic quartz/fluorescent operation for fixtures with 120 volt or multi-tap ballasts. LQ1/LF1 Separately wired, externally controlled quartz/fluorescent emergency lighting from a separate power source. CSR Quartz restrike using a current sensing relay. Extinguishes the auxiliary lamp when the main arc strikes. www.wide-lite.com Offset Junction Box (Optional accessory – PNDOJB. For free swinging or rigid pendant lengths longer than 12”). OPTIONAL CONDUIT MOUNTING The Round Spectra-Lyte can be direct surface or pendant mounted with optional 3/4” threaded hubs. Feed-through wiring (TW2) can be accommodated and the direct rigid conduit option (PND-RC) can be used on stems 12” or less. (For longer lengths use PND-OJB Offset Junction Box above). Direct Pendant Mount (PND-RC) Direct Surface Mount with Feed-through (TW2) Regardless of mounting configuration, with or without the Easy Hanger Plate, the Round Spectra-Lyte is U.L. Listed for use in wet locations. Wide-Lite • P.O. Box 606 • San Marcos, Texas 78667-0606 • (512) 392-5821 • Fax (512) 753-1122 Design Guide WIDTH Single Row of Fixtures Mounting Height 8’ 9’ 7’ 60’ Bay Width CENTERS SPACING 9’ 55’ Bay Width 28’ Fixture Spacing CENTERS 8’ 7’ 8’ 9’ 60’ Bay Width 30’ Fixture Spacing Double Row of Fixtures WIDTH Fixture Centers 7’ 55’ Bay Width Typical Bay 7’ 8’ 9’ METAL HALIDE & PULSE START HIGH PRESSURE SODIUM Data based on 175W MH*. Use multipliers below for other wattages. Data based on 150W HPS*. Use multipliers below for other wattages. Avg. FC Max. Min. Max./Min. Avg./Min. Avg. FC Max./Min. Avg./Min. 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 8.6 6.9 4.4 8.3 6.7 4.2 8.0 6.5 4.1 8.0 6.5 4.1 7.8 6.3 4.0 7.6 6.1 3.9 19.6 15.6 11.2 15.6 13.7 9.2 13.6 11.7 8.0 19.3 15.6 11.1 15.6 13.8 9.2 13.4 11.7 8.0 1.8 1.5 0.8 2.8 2.2 1.2 3.8 3.2 1.7 0.8 0.7 0.4 1.3 1.1 0.6 1.9 1.6 0.9 10.9 10.4 14.0 5.6 6.2 7.7 3.6 3.7 4.7 24.1 22.3 27.7 12 12.5 15.3 7.0 7.3 8.9 4.8 4.6 5.4 3.0 3.0 3.5 2.1 2.0 2.4 10.0 9.2 10.2 6.3 5.7 6.7 4.0 3.8 4.4 10.1 7.9 4.9 9.6 7.7 4.8 9.1 7.4 4.6 9.1 7.4 4.5 8.9 7.1 4.5 8.5 6.9 4.3 18.8 15.1 9.8 16.3 13.5 8.6 14.4 12.0 7.9 18.7 16.0 10.0 16.2 14.1 9.0 14.6 12.4 8.1 2.8 2.3 1.2 3.8 3.2 1.8 4.8 4.0 2.4 1.4 1.1 0.6 2.1 1.7 1.0 2.8 2.4 1.4 6.7 6.5 8.2 4.3 4.2 4.8 3.0 3.0 3.3 13.4 14.5 17.2 7.7 8.3 9.0 5.2 5.2 5.8 3.6 3.4 4.1 2.5 2.4 2.7 1.9 1.8 1.9 6.5 6.7 7.6 4.2 4.2 4.5 3.0 2.9 3.1 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 16’ 20’ 32’ 15.7 12.6 7.8 15.0 12.2 7.6 14.5 11.7 7.4 14.6 11.6 7.5 14.1 11.4 7.1 13.5 11.0 7.0 20.8 17.0 12.0 18.5 15.8 10.5 17.6 15.0 10.1 20.3 16.0 11.2 17.4 15.1 9.9 16.3 14.2 9.4 9.8 8.2 4.7 8.5 7.7 4.5 8.4 6.9 4.9 9.2 6.8 4.5 8.5 7.6 4.1 7.8 6.6 4.0 2.1 2.1 2.5 2.2 2.0 2.3 2.1 2.2 2.0 2.2 2.3 2.5 2.0 2.0 2.4 2.1 2.1 2.0 1.6 1.5 1.7 1.8 1.6 1.7 1.7 1.7 1.5 1.6 1.7 1.6 1.7 1.5 1.7 1.7 1.7 1.7 18.3 14.7 8.8 18.0 14.0 8.4 17.4 14.1 8.6 17.2 13.6 8.3 16.4 12.9 7.9 16.3 13.1 8.0 21.8 17.8 11.4 21.2 17.4 10.7 20.7 17.1 10.6 21.0 17.8 11.4 20.2 16.6 10.4 19.8 16.3 10.3 11.5 10.0 5.6 10.9 8.0 5.3 10.8 9.1 6.1 10.0 8.5 5.1 8.7 7.7 4.2 8.7 7.5 4.8 1.9 1.8 2.0 1.9 2.0 2.0 1.9 1.9 1.7 2.1 2.1 2.2 2.3 2.2 2.5 2.3 2.2 2.1 1.6 1.5 1.6 1.6 1.6 1.6 1.6 1.5 1.4 1.7 1.6 1.6 1.9 1.7 1.9 1.9 1.7 1.7 Metal Halide / Pulse Start Multipliers: 175W MH 1.00* 200W PS 1.11 150W MH 0.95 175W PS 1.05 100W MH 0.90 150W PS 1.00 70W MH 0.85 100W PS 0.95 * LLF .72 MH .80 HPS Note: Foot-Candle Calculations taken at grade. Max. Min. High Pressure Sodium Multipliers: 150W HPS 1.00* 100W HPS 0.95 70W HPS 0.88 Photometrics Symmetric RSPS 150w 3000 120° Symmetric RSPM 175w 3000 120° TOTAL LUMENS = 15000 TOTAL LUMENS = 16000 1500 1500 90° 90° 1500 E 1500 E D D C C B B A 60° 3000 A 60° 3000 4500 30° 4500 30° 6000 0° 6000 0° Conversion Multipliers Mounting Height A B C D E 9 ft 8 ft 7 ft 1.00 1.30 1.70 .75 .95 1.20 .50 .63 .82 .25 .32 .42 .12 .16 .21 www.wide-lite.com Wide-Lite • P.O. Box 606 • San Marcos, Texas 78667-0606 • (512) 392-5821 • Fax (512) 753-1122 Round Spectra-Lyte Ordering Sequence Catalog No. ✔ ❒ RSPM-175 ❒ RSPM-150 ❒ RSPM-100 ❒ RSPM-70 ❒ RSPP-200 ❒ RSPP-175 ❒ RSPS-150 ❒ RSPS-100 ❒ RSPS-70 Distribution ✔ ❒ S = Symmetric ❒ A = Asymmetric ❒ H = House Side Shielding Voltage ✔ ❒ 120 ❒ 208 ❒ 240 ❒ 277 ❒ 480 ❒ QV OVERALL DIMENSIONS 15” (38.10cm) 12 3/8” (31.43cm) 12 3/4” (32.39cm) 4 1/4” (10.80cm) 11 3/4” (29.85cm) 7 1/2” (19.05cm) SPECIFICATIONS Housing The housing shall be die-cast aluminum alloy construction with satin aluminum UltraClad™ polyester powder coat finish. Easy Hanger Plate and internal component mounting brackets shall be fabricated from pre-galvanized steel. Optical Assembly The optical assembly shall have an internal reflector system with upper and lower apertures for controlled downlight with uplight component. Reflector shall also shield the arc tube to sharply restrict discomfort and disabling glare. Downlight component shall have Type V Round distribution with sharp definition and high peak angles to give wide spacing and high uniformity while avoiding glare in visual zones. Upper aperture shall provide a symmetrical, upward light component that provides fill light on ceiling surfaces. Primary reflector shall be fabricated from specular, high purity anodized aluminum that is fixed within lens interior for rigidity and proper photometric alignment. The secondary, upper reflector shall be fabricated from specular, high purity anodized aluminium and shall redirect high angle light back to the primary reflector and useful beam. Lens The lens shall be enclosed with an injection-molded UV stabilized, high impact acrylic lens. An injection-molded, UV stabilized, polycarbonate lens is optional on all wattages, however, it is not recommended with 200-175 watt metal halide. Lens shall have smooth clear surfaces at all points where light is emitted in lower components for accurate distribution. An internally ribbed area shall diffuse the reflector image in upper section to reduce glare and for an attractive appearance. All external surfaces shall be smooth to deter dirt build-up and simplify cleaning. Options (Factory Installed) Finish ✔ ✔ ❒ LMP = Lamped (Standard) ❒ SA = Satin ❒ NLMP = No Lamp Aluminum (Standard) ❒ LQ = Hot/Cold Quartz Restrike ❒ DB = Dark Bronze ❒ LQ 1 = Separately Wired (120V) ❒ GN = Green Quartz Restrike ❒ GR = Grey ❒ CSR = Hot Quartz Restrike ❒ TBK = Textured Black ❒ IP65 = Dust-Tite Construction ❒ WHT = White (pendant mounting only) ❒ BL = Bi-Level ❒ TW2 = Thru-Wire Provision ❒ PND-RC = Pendant Accessories Mounting/Rigid Conduit ✔ (shipped separately) ❒ PND-OJB = Pendant ❒ F1 KIT = Single Fuse Kit Mounting/Offset Junction Box (120/277) ❒ VL = Polycarbonate Lens ❒ F2 KIT = Double Fuse Kit ❒ TS = Tamper Resistant Screws (208/240/480) ❒ F1 = Single Fuse (120/277) ❒ BG = Bird GuarD ❒ F2 = Double Fuse (208/240/480) (pendant mounting ❒ BP = Bulk Packed Easy Hanger required) Plate ❒ 50 HZ ❒ LF = Hot/Cold 55W HO Circline Auxiliary System with lamp ❒ LF1 = Separately wired (120V) 55W HO Circline Auxiliary System ❒ ADL = Additional Down Light directly to the upper reflector to assure proper photometric alignment with the optical system. Ballast Ballast is high power factor with reliable starting down to -40°F for High Pressure Sodium, -20°F for Metal Halide and -30°F for Pulse Start Metal Halide. Ballast coil windings are copper. Crest factor does not exceed 1.8. Mounting The mounting shall include a galvanized steel Easy Hanger Plate with universal provisions for 4” round and octagonal junction boxes as standard. An external set screw shall allow the fixture to be locked or removed without fixture disassembly. Optional tamperproof screws shall be available to prevent fixture removal by unauthorized persons. Threaded hubs are available as factory options for rigid pendant mount to 3/4” rigid conduit or direct surface mounting with feedthrough wiring. Listings U.L. Listed as suitable for use in wet locations and 40°C ambients. Standard construction is IP54. IP65 version is available as an option (pendant mounting only). Warranty User protection shall be assured by fixture and ballast components being covered by a published five-year, full-fixture limited warranty. Note: RSPP-200 Lens Warranty 1 year. All sales of items in this catalogue shall be subject to Wide-Lite's Standard Terms and Conditions of Sale current at the time of shipment. If you do not have a copy of Wide-Lite's Standard Terms, please contact the factory for same prior to ordering. Socket The socket shall be porcelain with spring-pressure center contact. High pressure sodium shall be 4KV pulse rated. Socket shall mount P.O. Box 606 San Marcos, Texas 78667-0606 (512) 392-5821 Fax (512) 753-1122 www.wide-lite.com Specifications and dimensions are subject to change without notice. BULLETIN NO. 0710-1103
Similar documents
F Series F Series F Series
Published seven-year limited warranty. All sales of items in this catalogue shall be subject to Wide-Lite's Standard Terms and Conditions of Sale current at the time of shipment. If you do not have...
More information