- Color

Transcription

- Color
®
RIP Output Guidelines for the Process Metallic Color System™
NOTE: These instructions work for Flexi (and PhotoPRINT) Production Manager Version 10x, 11.x and 12.x.
For Color-Logic Metallic Ink Files:
Step 1
Open Flexi Production Manager,
select a printer with a metallic
ink print mode and click on the
Job icon and select Add Job.
Step 2
Browse to and select your process
separated PDF file, check the box “Open
Job Properties” and Click Add.
Step 4
Click on the Separations tab, select
the CL 4713 SILVER channel and click
Edit.
Copyright © 2015. Color-Logic Inc | www.color-logic.com
Step 5
Change the Print As to:
Spot_Metallic.
Step 3
In Job Properties, click on the Color
Management tab and select Use
Linearization Only, then select a Color
Mode that is CMYK Metallic. Make sure
Ignore Overprint is unchecked.
Step 6
From here, the ink setup is
done. Setup other jobs settings
such as size, tiling etc.., as
needed and click Send to print.
P1 of 2
For Color-Logic White Ink Files:
Step 1
Open Flexi Production
Manager, select a printer
with a white ink print mode
and click the Job icon and
select Add Job.
Step 2
Browse to and select your process
separated PDF file, check the box
“Open Job Properties” and Click
Add.
Step 3
In Job Properties, click on the
Color Management tab and
select Use Linearization Only,
then select a Color Mode that is
CMYK and WHITE. Make sure
Ignore Overprint is unchecked.
Step 4
Click on the Separations tab, select
the CL 4713 SILVER channel and click
Edit.
Step 5
Change the Print As to:
Spot_White.
Step 7
Under the channel curve display, click on the
0 box, then enter 100 into the output box.
Step 7
The Spot_White channel should now appear inverted in the curve
display. From here, the ink setup is done. Setup other jobs settings
such as size, tiling etc., as needed and click Send to print.
Copyright © 2015. Color-Logic Inc | www.color-logic.com
Step 6
Next, you need to invert the
channel. Do this by first clicking
on the Color Adjustments Tab
and in the Channel section,
selecting Spot_White
P2 of 2

Similar documents

sendtoprint

sendtoprint Color Management tab and select Use Linearization Only, then select a Color Mode that will work with the Touch7 Job (For example, if you have a CMYK Orange and Green Touch7 file select a Color Mode ...

More information