Project Sheet
Transcription
Project Sheet
Project Sheet Birthday Parade by Nicola Jolliffe Project Supplies 1 sheet of US Letter (USL) white card stock (8.5 x 11) 1 five inch square piece of white card stock 1 piece of 5.5 x 5.5 square paper 1 piece of ribbon A Brayer Big and Juicy ink pad ‘Happy Birthday’ Stazon black ink pad Derwent Watercolor pencils Glue gel Scissors Fiskars Decal scissors The Ultimate Crafters Companion Large Rock-A-Block Stick & Spray Temporary Adhesive Cute companions ‘Birthday Parade’ stamps Instructions Step 1 Using your Ultimate Crafter’s Companion, score your USL card blank along the “Half–Fold US letter” line portrait Step 2 Again, score along the “Half-Fold US letter” line landscape. Use this line as a cutting guide to trim your card to a finished size of 5.5 x 11 (folds to 5 1/2 inch square). Step 3 Then cut another piece of white card to 5 inches square. www.crafterscompanion.com Step 4 On the piece of paper, stamp the mouse images onto the bottom half. Using Stazon and a Rock-A-Block. Then, cut a 5.5 x 5.5 square out of the remaining piece of paper. Step 11 Ink up the brayer. Step 5 Cut them out. These are your ‘masks’. Step 6 Stamp the 3 mice again, onto the 5 inch square card near the bottom, again using a Rock-A-Block and Stazon. Step 7 Spray the back of your masks with Stick & spray, temporary adhesive and attach over the top of the matching image on the 5 inch square card. Step 8 Using the fence stamp, stamp over the top of the mask onto the 5 inch square card. Step 12 Scrunching up a piece of scrap copy paper, roll the brayer across the paper to take of the excess ink and add a texture to the ink. Step 13 Roll onto your 5.5 x 5.5 square piece of paper, turning the paper and brayer more color to fill the square. Step 14 This leaves you a softly textured and colored piece of backing paper. Step 9 Remove the mask to reveal the scene. Step 10 Color the scene with watercolor pencils. www.crafterscompanion.com Step 15 Add the main picture onto the backing paper and leaving a slight border, cut the edges of the backing paper with deckle scissors. Step 16 Back to the Ultimate Crafters Companion board, use the bow maker and make a matching bow. Step 17 With the sentiment, stamped twice across the card, attach the bow, using glue gel. You’re all finished! www.crafterscompanion.com