Product Guide - Aqua Products

Transcription

Product Guide - Aqua Products
CLEAN, PROOF & RESTORE
Product Guide
CLOTHING - Cleaning
When you have a new jacket it’s amazing how the water just runs off the outside.
This happens because of a durable water repellent treatment (DWR) that’s applied at
manufacture to all jackets. But dirt, oil and normal household detergents will, over time,
mask the DWR, causing the outside of the jacket to absorb water (wetting out). ‘Wetting
out’ reduces breathability, comfort and performance and can make the jacket feel cold and
wet to the touch. Unlike normal detergents, Granger’s cleaners remove dirt, oils and stains
without harming the DWR, making your jacket work like new again. Or as we like to say,
‘Original performance restored’.
• Dirt causes fabric to wet out
• Reduced breathability
• Perspiration remains inside
• Clean material
• Fabric repels water
• Original performance restored
Granger’s cleaners are water based and phosphate free. Good for your gear and safe
for the environment.
30˚C Cleaner
•
•
•
Protects the DWR finish of all garments
Removes dirt and grime, improving garments performance
Recommended for Gore-Tex®, eVent® and all waterproof breathable clothing
HOW TO CLEAN
using 30˚C Cleaner, Base Cleaner, Down Cleaner
1 Close zippers and velcro flaps
2 Shake bottle and pour correct amount into the
machine drawer or wash ball. See bottle for correct amounts
3 Wash on a warm wash and rinse cycle. Granger’s
cleaners are formulated to work from 30˚C helping
save energy and protecting the environment.
30˚C Base Cleaner
• Ideal for Woollen and Synthetic base layers
• Maximises garments wicking performance
• Antimicrobial treatment eliminates odours
30˚C Down Cleaner
• Will not strip natural oils from Down, unlike household detergents
• Restores loft, improving insulation
• Antimicrobial treatment eliminates odours
4 Tumble dry if care label allows.
CLOTHING - Waterproofing
Want to keep your old jacket performing like new? Over time, your jacket loses its
durable water repellent (DWR) treatment but Granger’s range of re-proofing products
can restore it to its original condition. Unlike other products, Granger’s re-proofing
range uses the same technology as major garment manufacturers to restore
comfort, breathability and performance. With Granger’s products, your garments
work like new – or as we like to say, ‘Original performance restored’.
• Wetted out fabric
• Reduced breathability
• Perspiration remains inside
HOW TO PROOF
• Fabric repels water
• Breathability restored
• Original performance restored
using 30˚C Proofer
1 Ensure that the garment is clean, if the garment needs cleaning use Granger’s 30˚C cleaner. Close
zippers and velcro flaps.
2 Shake bottle and pour correct amount into the
machine drawer or wash ball. See bottle for correct
amounts
3 Wash on a warm wash and rinse cycle. Granger’s products are formulated to work from 30˚C helping save energy and protecting the environment.
30˚C Proofer
•
•
•
Air dry performance - restores proofing without tumble drying
Maximises breathability
Recommended for Gore-Tex®, eVent® and all waterproof breathable clothing
4 30˚C proofer will give excellent results without
tumble drying or ironing. If care label allows tumble
dry on a medium setting to improve durability.
using XT Proofer
1 Ensure that the garment is clean, if the garment needs cleaning use Granger’s 30˚C cleaner. Before applying XT ensure that all zips and velcro flaps are closed.
2 Being water based XT is best applied to a damp garment. Shake the bottle and spray evenly
onto the garment from a distance of 10 to 15cm.
3 Dab any excess moisture with a clean cloth.
XT Proofer
•
•
•
Spray on application
Ideal for soft shell garments
Recommended for Gore-Tex®, eVent® and all waterproof breathable clothing
4 Tumble dry on a medium heat until dry. Then continue to dry for a further 15 mins to ensure complete activation of the proofer.
2 in 1
1 Close zippers and velcro flaps.
2 Shake bottle and pour correct amount into the machine drawer or wash ball. See bottle for correct
amounts.
2 in 1 Cleaner & Waterproofer
•
•
•
3 Wash on a warm wash and rinse cycle - Granger’s products are formulated to work from 30˚C helping save energy and protecting the environment.
Unique Grangers product
4 Tumble dry on a medium heat until dry. Then Energy saving - uses only one wash cycle
continue to dry for a further 15 mins to ensure
Recommended for Gore-Tex®, eVent® and all waterproof complete activation of the proofer.
breathable clothing
CLOTHING - Waterproofing
HOW TO PROOF
using Superpruf
1 Ensure that the garment is clean, if the garment needs cleaning use Granger’s 30˚C cleaner. Before applying Superpruf ensure that all zips and velcro flaps are closed.
Superpruf
• Fast drying silicone based proofing spray
• Simple and convenient application onto a wide range of items
• Suitable for a wide range of products
2 Shake the can and spray evenly onto the garment from a distance of 10 to 15cm.
3 Dab any excess moisture with a clean cloth.
4 Allow to dry naturally, avoiding contact with moisture until completely dry.
Wax Spray
using Wax Spray
• Revives appearance
• Restores water repellency
• Simple spray on application
1 Wipe over garment with a clean, damp cloth and
then allow to dry naturally before reproofing.
2 Spray evenly over garment from a distance of 10 to 15cm.
3 Allow garment to dry naturally before use.
Wax Cotton Dressing
• Revives appearance
• Restores water repellency
• Ideal for Barbour® jackets and all wax cotton jackets
using Wax Cotton Dressing
1 Wipe over garment with a clean, damp cloth and then allow to dry naturally before reproofing.
2 Apply wax evenly with a soft cloth.
3 Allow garment to dry naturally before use.
FOOTWEAR - Cleaning & Waterproofing
Granger’s products help you keep your footwear working better for longer. Our
advanced proofers help to keep the water out while conditioning and nourishing the
leather, keeping your feet dryer and extending the life of your boots and shoes.
• Wetted out fabric
• Reduced breathability
• Perspiration remains inside
• Footwear repels water
• Breathability restored
• Original performance restored
HOW TO CLEAN
using G-Max Footwear Cleaner
1 Brush any loose dirt from the footwear.
2 Shake the bottle and press against the footwear.
3 Scrub the footwear all over using the sponge.
4 Rinse the footwear with clean water and a soft brush. Then allow to dry naturally and treat with a suitable Granger’s proofer before use.
G-Max Footwear Cleaner
• Effective on all footwear
• Powerful deep cleaning
• Water-based & biodegradable
HOW TO PROOF
using G-Max Universal Waterproofer & Footwear Proofer
G-Max Universal Waterproofer - Sponge & Spray
• Suitable for all types of footwear
• Simple Spray/Sponge application
• Maintains breathability of waterproof membranes
1a Sponge - Ensure that the footwear is clean
before application by using Granger’s footwear
cleaner. Shake the bottle and press the applicator
against the footwear spreading evenly in light
strokes.
1b Spray - Ensure that the footwear is clean before
application by using Granger’s footwear cleaner.
Spray evenly over the footwear from a distance of
10 to 15cm.
2 Dab any excess with a clean cloth.
3 Allow to dry naturally before use.
Footwear Proofer
• With added conditioner
• Fast drying and easy to use spray
• Suitable for all applications
FOOTWEAR - Waterproofing
G-Wax
• Formulated for full grain leather boots
• Natural beeswax formulation
• Maximum protection
Paste Wax
• Formulated for full grain leather boots
• Conditions and protects leather
• Maximum water repellency
HOW TO PROOF
using G-Wax, Paste Wax, G-Max Leather Conditioner
1 Ensure that the boots are clean by using
Granger’s footwear cleaner. Then rub the product
sparingly into the surface using a circular motion.
G-Wax Leather Conditioner
2 Using a soft cloth push the product deep into any crevices to prevent the leather from cracking.
• Formulated for full grain leather boots
• Offers maximum nourishment for the leather
• Maximum breathability
G-Max Odour Eliminator
• Suitable for all types of footwear
• Simple spray application
• Eliminates odours
HOW TO USE
G-Max Odour Eliminator
1 Remove the insoles from the shoes.
2 Shake the bottle and spray the top and bottom of the insole surface.
3 Hold the footwear upside down and spray evenly into the footwear.
EQUIPMENT - Cleaning & Waterproofing
Nothing takes the fun out of camping like a leaking tent, but by using our
Fabsil range of products you can keep your tent performing at it’s best.
Fabsil replicates the original finish applied at manufacture. By using it you can restore
the waterproofing of tents and other equipment, allowing them to perform like new.
• Fabric repels water
• Prolongs life of equipment
• Original performance restored
HOW TO USE
Fabsil Universal Cleaner
1 Brush or wipe off any lose dirt.
2 Dilute as per instructions on the bottle. Then wearing gloves, clean fabric with a cloth or soft brush and solution.
Fabsil Universal Cleaner
• Suitable for all types of fabrics
• Water based and biodegradable
• Powerful deep cleaning - ideal preparation before re-proofing
3 Rinse thoroughly with water to avoid any residue. Then wipe over with a cloth.
4 Allow to dry naturally.
Fabsil Liquid (Standard & Gold)
• Silicone based proofer suitable for all fabric types
• Paint on application
• Available in Fabsil Gold high strength version
Fabsil Liquid & Gold Liquid
1 Ensure that the fabric is clean using Granger’s Universal Cleaner. Shake Fabsil can well and pour into a suitable container.
2 Apply with a clean paintbrush using long even strokes.
3 Lightly rub in any droplets that form with a soft, clean cloth.
4 Allow to dry completely before exposure to rain or dew.
EQUIPMENT - Waterproofing
Fabsil Aerosol (Standard & Gold)
• Silicone based proofer suitable for all fabric types
• Simple spray application
• Available in Fabsil Gold high strength version
HOW TO USE
Fabsil Aerosol & Gold Aerosol
1
Ensure that the fabric is clean using Granger’s Universal Cleaner. Shake Fabsil aerosol well and spray evenly from a distance of 10 to 15cm.
2 Lightly rub in any droplets that form with a soft, clean cloth.
3 Allow to dry completely before exposure to rain or dew.
Fabsil Seamseal
• Sponge on application
• Easy to use
• Durable
Fabsil Seamseal
1 Use the applicator to apply a thin coat to either side of the seam.
2 Allow to dry for 24 hours prior to use.
When you have finished with this leaflet, please recycle it.
S
Clothing
Footwear
Equipment
Sleeping bag
Canvas
Rucksacks
Tents
Suede
Fabric
Leather
Base layer
Wax jacket
for your kit.
Soft shell
Granger’s products
Down jacket
choosing the best
Waterproof/windproof
table will assist in
Fleece
This quick finder
30°C CLEANER
30°C BASE CLEANER
30°C DOWN CLEANER
30°C PROOFER
XT PROOFER
SUPERPRUF
WAX SPRAY
WAXED COTTON
DRESSING
2 IN 1
CLEANER & WATERPROOFER
G-MAX FOOTWEAR
CLEANER
G-MAX UNIVERSAL
FOOTWEAR PROOFER
FOOTWEAR
WATERPROOFER
G-MAX
PASTE WAX
G-WAX
G-MAX LEATHER
CONDITIONER
ODOUR ELIMINATOR
FABSIL UNIVERSAL
CLEANER
FABSIL
FABSIL GOLD
FABSIL LIQUID
SEAM SEALANT
Environmentally responsible aftercare
At Granger’s we believe that it is only by working to strict independent standards that companies can
truly demonstrate their environmental commitment. Granger’s developed the first water based aftercare
products over 40 years ago and continues to be at the forefront of developing the most environmentally
responsible technologies. Granger’s is the only aftercare company to be a bluesign system partner and
have ISO 14001 accreditation. For more information about this please visit us at www.grangers.co.uk
Gore-Tex® is a registered trademark of W. L. Gore & Associates, Inc.
eVent® is a registered trademark of BHA Technologies, Inc.
Granger’s International Ltd
Grange Close, Clover, Nook Industrial Park,
Alfreton, Derbyshire DE55 4QT
Tel: +44 (0) 1773 521 521
Printed on FSC accredited paper.