Flat Bleed Retro Frame with Covers

C O
O M
M M
M E
E R
R C
C II A
A L
L
C
E X
X T
T R
R U
U SS II O
O N
N SS
E
Flat Bleed Retro Frame with Covers
Part
Number
Part
Length
Finish
2104
2121
2123
2125
Flat Bleed Retro Frame
Flat Bleed Retro Frame Cover
Extended Bleed Retro Frame Cover
1-1/2” Flat Retro Frame Cover
24’-5”
24’-5”
24’-5”
24’-5”
Mill Finish
Mill Finish
Mill Finish
Mill Finish
Part #2121
Part #2125
Part #2123
4.04
2.93
4.25
1.50
Part #2104
3.795
Features & Benefits
·
Retro
fits to new or existing cabinets
frame for kerf cutting to create custom shapes
·
Easily assembles with structural corner angles
·
Designed to accept optional frame support
·
Cover options for frameless or framed appearance
2.034
·
Preferred
Cover Screw
Flat Bleed Retro
Frame Cover
Part #5195
Part #2121
Tension Clip
Flat Bleed
Retro Frame
Part #5360
Part #2104
Flexible Face Material
3032 Walker Ridge Dr. NW
Grand Rapids, MI
Frame Corner
Angle Slot
Phone: (616) 784-0405
Toll Free: (877) 784-0405
Fax: (616) 784-0411
Flat Bleed Retro Frame - Part #2104
Flat Bleed Retro Frame Cover - Part #2121
Kit Designation - K2104/21
FAQ
2104/21
4”
2-7/8”
1-1/8”
See page 13, 15 & 38 in the
Gold Commercial Catalog
for more details.
Features & Benefits
The Flat Bleed Retro Frame is designed to fit over an
existing sign or support structure. It will tension any
size flexible face or banner material. The Tension
Clips are easy to use and are re-useable. Eliminates
hemming, grommets and double faced tape.
Answers to FAQ’s
h
Accepts any flexible face material.
h
Face material trim size - Add 3” of fabric to all four
sides. (Adding a total of 6” to both the height and
width)
h
Tension Clip placement - Tension Clips are placed
approximately 1-1/2” from the edge of the
trimmed to size face material.
h
Tension Clip spacing - Every 5” on center.
h
The correct Tension Tool to use with the frame is
Part # 5135.
h
Frame Support Tube and Frame Brace assemblies
may be required if the existing sign or sub-structure
is not structural enough to support the tension and
wind loads.
For further assistance please contact SignComp Customer Service
Toll Free (877) 784-0405 Phone (616) 784-0405 Fax (616) 784-0411 [email protected] www.signcomp.com