Electronic Access Control

Soluzioni per l'accesso elettronico
Board Of Directors Meeting – Worcester, July 2005
Electronic
Access
Solutions
Riccardo Cipriani
Southco Electronic Access Solutions
Board Of Directors Meeting – Worcester, July 2005
 Le soluzioni per l'accesso elettronico Southco (EAS) integrano le nostre
comprovate chiusure e serrature meccaniche con l’azionamento elettronico
per offrire dispositivi avanzati telecomandati e a controllo dell'accesso.
 Queste soluzioni semplificano la transizione dalle chiusure meccaniche a
chiave all’accesso elettronico a dispositivo di chiusura elettronici grazie a
linea versatile di sistemi di controllo dell’accesso.
Standard Platforms
Board Of Directors Meeting – Worcester, July 2005
Electronic Access Control “EA”
Electro-Mechanical Latching/Locking “EML”
Rotary
Electro-Mechanical
PIN Key Pad
Lettore tessera
Nuovo
Electronic
Swing Handle
RF Control
Electronic Key
Self Contained
Electronic
Access,
Locking &
Power
“SC”
Electronic
Keeper
Il sistema
Board Of Directors Meeting – Worcester, July 2005
Chiusura elettromeccanica (EML)
La scelta della EML adatta è essenziale a
garantire la qualità complessiva di
qualunque EAS e può aggiungere
efficienza, intelligenza integrata e sicurezza
all’applicazione.
Controllo dell'accesso
Il punto di interfaccia umana del sistema.
Dalla semplice tastiera al dispositivo
wireless, il controllo dell’accesso è
scalabile in base alle esigenze applicative
specifiche.
Monitoraggio a distanza
È l’anello di collegamento dei componenti
del sistema. Le opzioni di monitoraggio a
distanza variano da una semplice spia
luminosa a un sistema sofisticato in grado
di fornirne un audit trail completo degli
accessi.
Benefits of an Electronic Access Solution
Board Of Directors Meeting – Worcester, July 2005
 Sicurezza
•
•
•
•
Vandal resistance
Access Control
Peace of mind
Key management
 Integrazioni sistemi
•
•
Networked systems
Leverage existing electronics
 Industrial Design
•
•
•
•
•
Concealed latch points
Convenient keyless Access
Enhanced ergonomics
Switch vs latch access
Remote access
Basic Electronic Access Solution
Board Of Directors Meeting – Worcester, July 2005
Latch Status
Monitoring
Access
Control
Wiring,
interconnects
Power
Mechanical
Over-ride
Electromechanical
Latch Platforms
Southco EML piattaforma– Vantaggi
Board Of Directors Meeting – Worcester, July 2005
Efficient Mechanisms
Optimized electro-mechanics
Electronic Control
Typical EML electrical Function
Board Of Directors Meeting – Worcester, July 2005
 All existing Southco standard EML products use a “3 wire” operation:
• Potenza (VDC+)
• Terra (VDC-)
• Segnale
 Power and ground are always available to latch but only draw
significant current (amps) during latch cycling
 Low power signal is switched by access control device which initiates a
cycle of the latch
EM-10 Electronic Keeper
Board Of Directors Meeting – Worcester, July 2005
 Install with existing mechanical lock for simple
upgrade to electronic access with mechanical
override
 Versatile design works like an electrically
actuated, frame mounted push to close latch
 Provides simple transition from mechanical to
electronic access
 Efficient gear motor design provides high strength
with low power requirement
 Output signal provided for latch status
 24 Volt version now available (400 series)
 Deadbolt version now available
EM-05 Miniature Electronic Keeper
Board Of Directors Meeting – Worcester, July 2005
 “Push-to-close” convenience with either
electromechanical or mechanical release.
 Contains a microprocessor controlled gear motor that
provides a higher working load capability and lower
power requirements than comparatively sized
solenoid based solutions.
 Quiet operation for noise sensitive applications.
 Optional integrated mechanical override release rod
for a simplified override system.
 Optional microswitch for monitoring latch bolt status.
 Operating voltage range from 8 to 26 Volts DC.
 Separate power and control wires for easy integration
with most access control systems.
R4-EM Electronic Rotary Latch
Board Of Directors Meeting – Worcester, July 2005
 Facile da installare e manutenere, la chiusura R4-EM
coniuga la praticità del controllo elettronico dell'accesso
e la sicurezza comprovata di una chiusura rotativa
robusta, interamente realizzata in metallo in un
un'unica soluzione.
 Il semplice azionamento a spinta e l'attuazione
elettronica semplifica l'accesso in una varietà di
applicazioni.
 Il microswitch opzionale indica lo stato della chiusura e
la versione con chiusura a tempo tiene le porte
sbloccate per i cicli di apertura e chiusura manuale
 Time Delayed Re-lock version also available. Perfect
for heavy doors, multiple doors or when the door
shouldn’t be pushed open by latch.
R4-EM Light Duty (Plastic)
Board Of Directors Meeting – Worcester, July 2005
 The plastic components provide a 65% weight savings over
the standard steel housing R4-EM.
 The latch is available in both Auto Re-lock and Delayed Relock versions.
 The latch has the same electrical specifications and operation
as the standard steel housing R4-EM.
 The optional microswitch provides cam status feedback.
 The latch is NOT a drop in replacement for the standard steel
housing R4-EM.
• The cam opening is smaller, requiring a smaller diameter striker
bolt
• The mounting holes are smaller – Metric M5
• The mechanical override trigger located at the rear of the latch
• The working and ultimate loads are reduced (as compared to the
standard steel housing version) Ultimate L 800N, Working L 665N
Versione per applicazioni esterne
R4-EM
Board Of Directors Meeting – Worcester, July 2005
 New design of IP56 Sealed Motor Actuator
 Sealed electrical connector option
 Steel Housing, Cam & Trigger. Zinc Nickel Finish
 Small increase in width dimension
 Rear mechanical over-ride lever option
H3-EM Chiusura elettronica con maniglia
girevole
Board Of Directors Meeting – Worcester, July 2005
 La maniglia elettronica girevole H3-EM può
accomodare facilmente rack di dimensioni e
configurazioni diverse grazie alla semplice
preparazione del pannello a foro singolo.
• Compatibile con le preparazioni standard dei
pannelli.
• Facile integrazione con i sistemi standard a rack
monitoraggio e sistemi di sicurezza
 Sensori integrati per il rilevamento dello stato della
chiusura, il monitoraggio dell’accesso e le funzioni
di allarme
 Efficiente design con motoriduttore per ridurre il
consumo energetico
 Azionamento momentaneo o continuo del blocco
con esclusione manuale integrata
H3-EM Operation
Board Of Directors Meeting – Worcester, July 2005
Mechanical Override Systems
Board Of Directors Meeting – Worcester, July 2005
 All Southco EML products incorporate override
capability in the event of power failure or emergency
R4-EM
Mechanical
Override
Board Of Directors Meeting – Worcester, July 2005

See www.southco.com for literature on the mechanical override system options
for the R4-EM family of electromechanical latches.
http://www.southco.com/class/r4-em-mechanical-override-system-7654.html
Access Control Solutions
Board Of Directors Meeting – Worcester, July 2005
 Standalone Digital Keypads
 iButton Electronic Key
Systems
 Standalone RF Proximity
Readers
 RF Remote Control
 USB Controller
EA-KC2 Centralina di accesso con tastierino
a membrana
Board Of Directors Meeting – Worcester, July 2005
 Two outputs allows for independent access control of
two compartments or doors
 Low power for battery applications
 Supports 120 user access codes per output
 4 digit key codes
 Programmable door release time (1 second to 90
minutes)
 LED indicators
 Non-volatile memory will retain data when power is
removed (memoria permanente)
 Horizontal and vertical membrane keypads available.
 Operating Voltage: 12 to 24 VDC
EA-KC2 Membrane Keypad
Access
Controller Sistema completo
Board Of Directors Meeting – Worcester, July 2005
 The new EA-KC2 Membrane Keypad
Access Controller provides part of a
“plug and play” complete access
control system consisting of:
• Membrane Keypad: EA-KC2-10X
• Controller: EA-KC-201
• Power Supply: EA-A02-002
• Electromechanical Latch: EM-05
shown (could be any EML)
• Wire Harness: EA-W20-201-01
EA-K1 Centralina di controllo
dell'accesso
tastierino
Board Of Directors Meeting con
– Worcester,
July 2005
 Simple user code programming
 Integral tamper switch
 LED’s & audible tone provide user
feedback for operation & programming
 990 million possible PIN
 Programmable door release time and
keypad lockout time
 Non-volatile Memory will retain data after
power loss
 Custom colours and logos
EA-P1 Lettore di prossimità
Board Of Directors Meeting – Worcester, July 2005
 Card only, Card plus PIN, Card or PIN
access modes
 Simple EA proximity card programming
 Integral tamper switch
 LED’s & audible tone provide user
feedback for operation & programming
 Accommodates up to 9999 users
 Programmable door release time and
keypad lockout time
 Non-volatile memory will retain data after
power loss
 Custom colours and logos
NUOVO H3-EM With Integrated 125kHz
Proximity
Reader Overview
Board Of Directors Meeting – Worcester, July 2005
 Sblocco e blocco remoto
 Azionamento momentaneo o continuo del dispositivo
di chiusura
 Monitoraggio locale con indicatore LED multicolore
 Fornito di uscite per il monitoraggio remoto dello
 stato della chiusura
 Preparazione del pannello 25x150mm secondo lo
standard industriale
 Chiusura a chiave integrale per l’esclusione manuale
 Opzioni con chiusura elettronica e lettore di schede
RFID
 Il lettore riconosce anche le schede RFID
Integrated 125kHz
Proximity Card
Reader Module
H3-EM With Integrated 125kHz Proximity
Reader
Overview
Board Of Directors Meeting – Worcester, July 2005
How it Works






The reader generates a 125 kHz field of energy.
The card receives this energy and sends the card
number to the reader to identify the card.
The reader generates either a Wiegand output or a
R2-232 output containing the card information.
The access controller compares the card data and
either grants or denies access. If access is granted,
the access controller then sends a signal to unlock
the Electronic Swinghandle.
Note: The reader inside the latch must be connected
to an access controller to authenticate credentials
and operate the H3-EM.
The access controller could be the Southco EA-P1
Proximity Key Pad or customers own access control
system.
Wiegand / RS-232
output
Access
Controller
Lock control
H3-EM With Integrated 125kHz Proximity
Reader
Overview
Board Of Directors Meeting – Worcester, July 2005
 What is a Wiegand Interface?
• A Wiegand interface refers to how two devices (card reader and access
controller) communicate with one another.
• It refers to the physical and electrical connections between these devices.
• It is the most common interface in the access control industry for
communicating with a card reader.
 What is a R2-232 Interface?
• A RS-232 interface also refers to how two devices (card reader and
access controller) communicate with one another.
• It is the exchange of serial binary data between two devices.
• It is not as common as the Wiegand interface, but our customers have
requested this.
EA-R02 Radio telecomando RF wireless
( versione
Not
for sale in EU)
Board Of Directors EA-R01
Meeting – Worcester,
July 2005
 Il telecomando EA-R02 garantisce
l'azionamento a distanza delle chiusure
elettromeccaniche Southco mediante un
dispositivo compatto, leggero e
conveniente.
 Il trasmettitore palmare a infrarossi
comunica con un ricevitore facilmente
installabile in grado di bloccare e sbloccare
le chiusure senza impegnare le mani
dell'operatore.
 Facile da installare e configurare, questo
dispositivo semplifica la transizione
dall'accesso meccanico a quello
elettronico.
EA-B90 Sistema a chiavi elettroniche
Board Of Directors Meeting – Worcester, July 2005
 Il sistema a chiavi elettroniche Southco offre
una soluzione efficiente ai problemi di gestione
delle chiavi.
 Intuitivo e facilmente programmabile, questo
sistema autonomo consente di impostare
diversi privilegi di accesso su una vasta
tipologia di armadi e risulta ideale per gli
impianti azionati a batterie e le applicazioni con
molti utenti.
 Portachiavi, lettore dati e controller di
validazione funzionano perfettamente con i
blocchi elettromeccanici Southco.
 Gli utenti possono programmare, aggiungere e
cancellare i codici chiave semplicemente
premendo un tasto.
 Inoltre, i 280 trilioni di combinazioni possibili
garantiscono il massimo livello di sicurezza
dell'accesso.
EA-A01 Junction Box
(Centralina)
Board Of Directors Meeting – Worcester, July 2005
 Accommodates 2 access control
devices and 2 electromechanical
latches
 Convenient centralized connection for
system power
 DIP Switches allow for any
combination of access control to latch
 Use with any Southco access
controller to electromechanical latch
combination
 Order Junction Box, wire harness and
power supply separately
EA-A06 USB Controller (Centralina)
Board Of Directors Meeting – Worcester, July 2005
 La centralina USB Southco EA-A06 a controllo computerizzato consente di
azionare fino a 14 serrature elettroniche e altri dispositivi mediante il semplice
collegamento a una normale porta USB del computer.
 Usata con un qualunque computer del cliente, la centralina EA-A06 consente di
monitorare e registrare l'accesso alle serrature elettroniche in modo semplice,
fornendo pertanto una funzione di audit trail a supporto della conformità ai
requisiti regolatori. Software deve essere fornito dal cliente.
NUOVO - SC-Self Contained Latch Solution
Board Of Directors Meeting – Worcester, July 2005
 Battery Operated (3 AA cells )
 Keypad or RFID Card
 Vertical or Horizontal orientation
 Fits 25 x 150mm panel prep
 Multiple cam offsets to accommodate
different door to frame distances
 Rod systems for multi-point latching
 Up to 100,000 cycles on 3 AA batteries
 Programming key with 9 volt battery and
for external electrical override
 One-touch programming
EAS Technical Selling
Process
Board Of Directors Meeting – Worcester, July 2005
Contacts
 Typical Sale of an EAS product
Mechanical
Engineer
Regulatory
Engineer
Supply
Chain
Software /
Systems
Engineer
Marketing /
Industrial
Design
Electrical
Engineer
Company
Director
 Design window is much
bigger than with a typical
mechanical product.
 Time from customer’s
“initial inquiry” to full
production is much
longer.
 Requires more monitoring
and involvement from the
salesperson.
 Support from EAS team
may also be required.
EAS Technical Selling Process
Board Of Directors Meeting – Worcester, July 2005
 Familiarize yourself with some
basic electronics terms. Look for
future learning units from the EAS
team.
 Print out and review the trade
drawings & TD sheets.
 Understand the concept of a basic
system and it’s components.
 Realize that the design process
can be long and requires contact
with new areas of the customer’s
organization.
 Reach out to the EAS team for
help.
Electronics
Products
EAS
Selling
Process
Systems
Contacts
R4-EM Rotary ElectroMechanical Latch
Board Of Directors Meeting – Worcester, July 2005
Application: Medical Storage
Cart
Feature
Benefit
Lightweight
Weight & Cost
saving on mobile
application
Motor driven
Reliable & low
noise operation
Low electrical
power
Enables use of
battery in mobile
application
Economical (light
duty)
Better value for
lower cost carts
R4-EM Rotary ElectroMechanical Latch
Board Of Directors Meeting – Worcester, July 2005
Feature
Benefit
Sealed option
Water and low
temperature
resistance
High working load
and/or ultimate
load
Higher security,
reliable operation
Intelligent
electronic control
Integration with
vehicles existing
key fob
Micro switch
option
For vehicle
lighting or alarm
control
Application: Special Vehicle secure
storage doors
(secondary electronic inter-lock)
R4-EM Rotary ElectroMechanical Latch
Board Of Directors Meeting – Worcester, July 2005
Application: Tanning Booth
payment terminal
Feature
Benefit
Small package,
high strength
Integrates well with
telescopic slide
Motor driven
Reliable & low
noise operation
Intelligent control &
monitor ability
Easy integration
with existing PC
Micro switch option
Slide closed status
R4-EM Rotary ElectroMechanical Latch
Board Of Directors Meeting – Worcester, July 2005
Feature
Benefit
Intelligent Motor
control &
monitoring
Integrates easily
with payment
system
Motor driven
Reliable & low
electrical power
operation
Low electrical
power
Enables use of
battery emergency
over-ride
Concealed, push
to close
Higher security;
vandal resistance
Application: Electric Vehicle
Charging Station power outlet
access
EM-05 Mini Electronic Keeper
Board Of Directors Meeting – Worcester, July 2005
Application: Medical
Dispensing Cart
Drawers/Doors
Feature
Benefit
Efficient Gear Motor
Actuation
Quiet Operation
Push To Close
End user
ergonomics/ease of
use
Integrated Mechanical
Manual Override
Enables Remote
Mounting
Smaller Size
Minimal Impact on
Useable Space
Internal Micro switch
Provides Latch Status
For Remote Monitoring
SC- Self Contained Latch w.
Keypad/ Card
Board Of Directors Meeting – Worcester, July 2005
Feature
Benefit
Integrated Proximity
Reader or PIN Keypad
One Panel Prep For
Latch & Access
Controller
150mm X 25mm Panel
(Swing Handle) Cutout
Quick upgrade to EAS
as drop in replacement
Battery Powered
No external wiring or
power – easy upgrade
Efficient gear motor
actuation
Battery only power
option, long cycle life
External battery key
Provides Access
During Power Failure
Application: Enclosure with
local electronic access
control
SC- Self Contained Latch w.
Keypad/ Card
Board Of Directors Meeting – Worcester, July 2005
Feature
Benefit
Integrated Proximity
Reader or PIN Keypad
One Panel Prep For
Latch & Access
Controller
150mm X 25mm Panel
(Swing Handle) Cutout
Quick upgrade to EAS
as drop in replacement
Battery Powered
No external wiring or
power for mobile app.
Efficient gear motor
actuation
Battery only power
option, long cycle life
External battery key
Provides Access
During Power Failure
Application: Tablet or
Notebook Computer Storage
Cart for Schools
H3-EM Swing Handle w/
Integrated Prox
Board Of Directors Meeting – Worcester, July 2005
Feature
Benefit
Integrated Proximity
Reader
One Panel Prep For
Latch & Access
Controller
Reader with Wiegand
Output
Connects to Most
Access Control
Systems
Intelligent Electronic
Control
Simple Integration with
Access Control
Systems
Integrated Sensors &
LED
Provide Status of Latch
Locally & For Remote
Monitoring
DIN Lock
Provides Access
During Power Failure
Application: Enclosure in
Data Centre – Remote
Access Control
Integrates with
existing building
security system
EAS Sales Tools
Board Of Directors Meeting – Worcester, July 2005
PART NUMBER
DESCRIPTION
28-EA-A01-15-01 Junction Box Demo Kit
28-EA-A04-15-01 9V Switch Box
28-EA-A06-15-01 USB Controller Demo Kit
28-EA-KC2-15-01 Membrane Key Pad Demo Kit (Includes Mini E-Keeper)
28-EA-P1-15-01
Pin/Prox Demo Panel
AVAILABLE
12 panel
sales kit will
cost
€ 1000
excluding
PFG
discount(s)
28-EA-R02-15-01 RF Controller Demo Kit
28-EM-15-01
E-Keeper Demo Panel
28-H3-EM-15-01 H3-EM Demo Panel
28-H3-EM-15-02 H3-EM with Wiegand Prox Reader Demo Panel
28-R4-EM-15-01 R4-EM Auto Relock Demo Panel
28-R4-EM-15-02 R4-EM Mechanical Override Demo Panel
28-R4-EM-15-03 R4-EM Delayed Relock Demo Panel
Note: EA wire harness and
power supplies to be ordered
separately depending on your
kit configuration – contact
EAS team for assistance!