Trade Tools

ISSUE 5 • NOVEMBER 2013
WIN
A FERRAR
HOT LAP W I
ITH
SEE PAGE
THE TRADE MAGAZINE
BY ENGINEERS FOR ENGINEERS
A LOOK AT WHAT’S INSIDE
BUY
25
PAGE
4
E
U
Q 7
R
TO
Valid from 1 November 2013 to 31 December 2013. While stocks last.
PAGE
Chr
ice
Pr
mas
ist
%OFF
4
sh
Sma
AND GET HEINEKIN
PAGE
PAGE
00
10
PAGE
14
Phone in your order: 0800 4 TOOLS
A Country Full of Engineering Excellence!
In an environment where the message outwardly is that
Manufacturing in New Zealand is in decline, we are constantly
heartened as we make our way around the traps. Our team
comes across pockets of industry that punch well above
their weight, both technically and commercially, so much
so, that we would like to take the opportunity to recognise
some of these businesses, and help get the message out that
manufacturing is more than ALIVE & WELL!
One such company is Howard Wright Ltd, who have been
manufacturing state of the art medical beds & stretchers for the
international market since 1976. Core to their approach is applying
continuous improvement to all activities, making processes and
performance highly visual and creating an atmosphere which
values free thinking. Ideas are captured and refined constantly.
Whether it is improving tooling, developing new processes,
streamlining factory workflow or training to work smarter and safer,
the philosophy of continuous improvement always applies.
INOX INDUSTRIAL LUBRICANTS
INOX MX3 Displaces – penetrates - lubricates
– protects. INOX contains no silicon,
acid, kerosene or dieselene. INOX
will not harm metal points or
surfaces, plastics, paints, enamels,
fibreglass, formica or neoprene
seals.INOX doesn’t dry out, gum
up, become gooey or sticky or
wash off with water! INOX is nonconductive, non-static, non-toxic,
non-corrosive and non-staining.
Toolmaker, Tony Hurring of Howard Wright
passes on that prior to 2002, the welded
components of their product were assembled
by hand. Today they have two Robotic welders,
with tooling & jigs having evolved to suit.
“We have introduced quicker lower profile
clamping solutions using pneumatic cylinders,
with speed of loading and unloading being key.
Once the parts are placed into position it simply takes
the push of a button, and the entire module is located
securely ready for welding. Utilising low and compact
cylinders, allows greater robot access to welds, resulting in
much less post process clean up. Likewise, on completion
all clamps are opened simultaneously and welded
assemblies removed quickly ready for the next batch”.
Contact [email protected] to tell us about it – from shed based rebuild projects through to multi-million dollar ventures; if there’s great engineering going on, we would love to hear about it!
RICO DOUBLE
FLARING
TOOL KIT
401 25ML
Bonding Porous Materials.
General purpose for bonding
most substrates such as
plasticsrubber, paper/card, wood
and metals.
$25
JOBBER DRILL
SET NEED AN
OVERHAUL?
Why buy a whole pack when you can
restock those small, easily broken sizes
for a fraction of the cost of a new set?
Loose pack of 1.0 – 6.5mm drills in blue
(0.5mm increments)
2828320
LANOX MX4-300G
AEROSOL CAN
2850750
2850780
e
sam
e
th
ith case
r
w
e
ov
ed
na
ve mpar lied i
a
S co upp
s
en
wh drills
This simple
all-in-one
imperial
flaring tool
makes it quicker
and easier to flare your own
pipes and is much easier to use.
• Forms single and double flares
• Adjustable grip pressure for different tube walls and
materials
• No more dismantling and assembling the tool
between flares
• This tool covers six popular pipe sizes - 3/16”,
1/4”, 5/16”, 3/8”, 1/2” and 5/8”
406 25ML
$105
2850840
63mm
50mm
TRI-CIRCLE
BRASS PADLOCKS
38mm
32mm
25mm
$449
1640170 1640100 1640180 1640190 1640200 W0000229 7204120
$3.50
$5.50
$7.50
$8.50
$11.50
$17.50
20mm
25mm 32mm 38mm 50mm 63mm 20mm
SGS TiN COATED
BURR SET #6M
US made Double cut set
Shank: 6MM
3152480
Surface Insensitive Instant
Adhesive. A low viscosity adhesive
which is excellent for almost all
surfaces. Ideal for difficult-to-bond
rubber compounds.
HITACHI G13SB3
1300W ANGLE GRINDER
$25
2828330
This great angle grinder offers
unprecedented power and performance
in a compact, one-handed style package.
Perfect for applications where high power
is required for prolonged tasks, but access
limitations prevent conventional machines
being used. A sleek body, low profile head
and ergonomically angled removable
side handle makes this tough grinder a
pleasure to operate.
• Complies with the Australian standard AS4991
• Fits to almost all plastic and steel 205 Litre drums
with lids fitted, which have a rim
• Allows for extraction of a drum from the middle of a
cluster without affecting the other drums
• Cast using high quality ductile iron; conforms to
Australian standards (S.G. Iron 500/7 to AS141831)
• Powder coated in safety yellow
• Holds up to 1 Tonne easily
• Prevents injuries and spills
• Robust and reliable for harsh conditions
Set contains:
• SA-5M
• SC-3M
• SC-5M
• SD-5M
• SF-3M
• SF-5M
• SG-3M
• SL-4M
$225
6220110
Backed by Hitachi’s 3 year heavy duty warranty.
$199
3326200
Limited stock available at this price
$395
W0000228
A TRADITION OF TRUST – NOW AVAILABLE THROUGH TRADE TOOLS!
ENQUIRES AT 0800 4 TOOLS OR [email protected]
W0000227 – Blue Jet set
Order Online at www.tradetools.co.nz
$16
$75
$29.95
2
2850760
Set contains:
• 4 x Pliers (Box Joint, Long Nose, Diagonal & Combination)
• 9 PC Long Type Hex Key Wrenches 1.5 - 10mm
• 1 x 1/2” Drive Swivel Handle
• 14 x Combination Wrenches 8-32mm
• 5 PC Chisel Punch Set
• 3 x Slotted Anti-Slip Screwdrivers 4x100, 6.5x100, 8x175mm
• 3 x Phillips Anti-Slip Screwdrivers PH1x80, PH2x100, PH3x150
• 1/2” Drive Socket Set - 18 x 1/2” Dr Sockets 10-32mm
• 4 x Accessories (Handle, Universal Joint, 2 Extension Bars)
• 2 Hammers (Engineers & Dead Blow)
• 1 x TBAC0501 Tool Chest
PACIFIC HOISTS DRUM GRAB
%
0
3
$95
LANOX MX4-5LT BULK CONTAINER
(with applicator)
TOPTUL GCAZ0039 63PC CANTELEVER TOOL CHEST
Do you work for a business that has something to crow about?
ANEROBIC ADHESIVES
LANOX is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and lanolin base
with specialised chemical compounds. Lanolin is a natural wax found in animal wool especially the wool from sheep,
commonly referred as ‘WOOL FAT’ or ‘WOOL GREASE’, it has wide spread uses, cosmetics, medical, soaps, etc.
Through the centuries the Egyptians, Romans, Vikings, sailors and soldiers alike all used lanolin
as a very effective anti- corrosion and waterproofing agent for a variety of metals, materials,
timbers, to protect sails, leather, cannons, etc. Although we make INOX, a quality anti-corrosion
lubricant, there are areas where a lanolin based anti-corrosion lubricant like LANOX is
sometimes better suited for the application at hand. LANOX contains no silicon, kerosene,
acids or dieselene. LANOX is harmless to metal points & surfaces, plastics, painted &
enamel finishes, fibreglass, formica, rubber or neoprene seals. LANOX doesn’t become
sticky, gooey or gum up. LANOX is non-conductive, non-static & non-corrosive. LANOX
has neutral properties, and low flammability (NON-AEROSOL).
INOX MX3-300G INOX MX3-5LT BULK
AEROSOL CAN CONTAINER (with applicator)
$14
For more info on this great Kiwi manufacturer see www.howardwrightcares.com
LANOX INDUSTRIAL LUBRICANTS
We accept
All prices exclude GST
Phone in your order: 0800 4 TOOLS
3
COMPARE OUR PRICING
COMPARE
THE RESULTS!
MINERAL - CIMPERIAL 1070
Soluble metalworking fluid recommended
for a wide variety of heavy duty machining
and grinding operations “one fluid for all
operations” Suits both individual machine
sumps and central system applications.
WIN ONE
OF
6 SPINS
IN A
FERRAR
I SIMPLY
BY BUYI
NG SEC
O
Purchase any
10pc pack of SECO parting inserts
during Nov/Dec at your normal discount rate
and receive a corresponding
HSS blade at ½ price!
Not only that, each purchase will qualify
you for an entry to win one of six drives
in a Ferrari 360 Modena at Hampton
Downs - Including airfares!
HITACHI D13VB3 2 SPEED
VSR Drill
2831100 Cimperial 1070 - 5L $65
2831110 Cimperial 1070 - 20L $220
2831130 Cimperial 1070 - 200L $1800
6850100 $80
PIVOTING FORK HEAD
For Use With Bench Lathes. With Self Centering Head For Diamond
Pattern Knurling. 4-7/8” x 5/8” x 5/8” Shank. Takes 3/4” x 3/8” x 1/4”
Spiral Knurl Wheels (Right & Left) Medium Wheels Fitted.
6850160 $35
SIX WHEEL HOLDER
Gives Three Diamond Knurling Pitches By Just Revolving The Head.
6-1/2” x 1/2” x 7/8” Shank. Fitted with 3 sets of 5/8” x 3/16” x 1/4”
Spiral (Right and Left) Coarse, Medium & Fine Knurl Wheels.
6850150 $105
REVOLVING FORK HEAD
For Production Knurling Complete With A Pair Of Each Medium
,Coarse And Fine Cut Knurls. 6-1/2” x 1/2” x 1-1/8” Shank. Fitted with
3/4” x 3/8” x 1/4” Knurling Wheels.
25
% OFF
WA
S
PAC
K
50 S
HEE
CE
$70
TS
SM
NOW
HOUGEN COPPERHEAD CARBIDE TIP
ROTABROACH CUTTERS
50mm Depth of Cut Copperhead Carbide Tip
Rotobroach Cutters feature a durable grade
carbide insert. Suits most Mag Drills perfect for
abrasive and tough-to-cut materials. The unique
Hougen design also includes a special tool
geometry that helps maintain better chip flow than
other brands. Size range from 14 - 40mm
4
Order Online at www.tradetools.co.nz
6850120 $125
Long series with Ball end
PRI
ASH
$49
W0000230
FACOM STANDARD
PIN PUNCH SETS
Hexagonal shank, high-strength steel tip, hardened
to 52-58 Hrc and supplied in a sheathed wrap.
Sizes 2, 3, 4, 5, 6, 8mm
$75
3140960
FELO SCREWDRIVER SET
18PC c/w WALL BRACKET
• Ergonomic, the first handle that
adapts to the users hand
• Smooth, seamless handle for
maximum comfort
• Hand & handle interlock causing
less strain
• Anti-roll handle design
• Blade manufactured from chrome
molybdenum vanadium steel
METRIC 9PC
$18.95
3800870
!
.95
2830960 Cimtec C205 - 5L
$39
2830980 Cimtec C205 - 20L $120
2831000 Cimtec C205 - 200L $950
SELF CENTRING FORK HEAD
TOPTUL HEX KEYS SETS
No more making do with the
wrong grit! 10pc’s of each of the
5 most common grits
80, 180, 320, 600 & 1200
Made in Japan
2831170 Cimstar 70HFP - 5L $55
2831180 Cimstar 70HFP - 20L $185
2831190 Cimstar 70HFP - 200L $1500
For Diamond Pattern Knurling. 5-1/2” x 3/8” x 7/8” Shank. Takes 5/8” x
5/16” x 1/4” Spiral Knurl Wheels (Right & Left) Medium Wheels Fitted.
3325580
RIKEN WET & DRY MULTI
PACK 50 SHEETS
Metals:
Cast Iron, Nodular Iron, Carbon Steels,
Ferrous metals
Duty Range:
Moderate to some heavy-duty.
6850130 $22
$299
GRUNT!
Metals:
Most Aluminum Alloys, Cast Iron, Nodular
Iron, Carbon Steels, High Speed Steels,
High Alloy Steels, Stainless Steels, Most
Non-Ferrous Alloys
Duty Range:
For moderate to heavy-duty operations
Extremely low foaming, clear biostable
synthetic for central systems and individual
machines. Well suited for applications
where foam and ferrous corrosion control
are critical. Very resistant to attack by
mould and bacteria. Excellent settling
properties allowing the mix to remain clean.
Exceptional tramp oil rejection.
For Holding Straight, Chequered or Spiral Knurl. 4” x 1/2” x 1/2”
Shank. Fitted with a 3/4” x 1/4” x 1/4” Straight Medium Knurl Wheel.
A true performer!
13mm keyed chuck, high
powered 790W, synchronised
2-speed gearbox, variable
speed and reverse function and
includes built-in safety clutch.
Backed by Hitachi’s
Heavy Duty 3 Year Warranty
FREE
HD HITACHI
WORK GLOVES
SYNTHETIC – CIMTEC C205
Recommended for High Fluid Pressure
and High Volume. Flow Applications where
minimization of foam is critical. It can be
used for machining and grinding operations
of ferrous and some non-ferrous materials,
chlorine free.
SINGLE KNURL HOLDER
SOLAR KNURLING TOOLS
SECO PARTING
Metals:
Carbon Steels, High Speed Steel, Cast Steels,
Alloy Steels, Tool Steel, Stainless Steel, Cast
Iron, Aluminum, Bronze, Brass & Copper Metals.
Duty Range:
For moderate to heavy-duty operations.
SEMI SYNTHETIC – CIMSTAR 70HFP
SAE/IMP
$18.95
3800860
Set contains:
• 5 Flat: 3 x 80mm, 4 x 100mm, 5.5 x
125mm, 6.5 x 150mm, 8 x 175mm
• 2 Phillips: #1 x 80mm, #2 x 100mm
• 2 Pozi: #1 x 80mm, #2 x 100mm
• 4 Torx: T10 x 100mm, T15 x 100mm,
T20 x 100mm, T25 x 100mm
• 2 Square: #1 x 120mm, #2 x 160mm
• 1 Insulated Flat: 3.5 x 100mm
• 2 Insulated Phillips: #2 x 100mm
$149
W0000231
THAT’S ONLY $8.20 per SCREWDRIVER!!
We accept
All prices exclude GST
Phone in your order: 0800 4 TOOLS
5
PIN CHUCK SET
TOPTUL TORQUE
KAO-JEN CARBIDE TIPPED HOLE CUTTER COMBO
1/2 PRICE
Set contains:
• 1 x chuck
•3 x collets 0-2.4mm dia range
collectively worth over $350
3/8dr 19-110Nm
TORQUE WRENCH
1/4dr 6-30Nm
TORQUE WRENCH
3/4dr 100-500Nm
TORQUE WRENCH
$115
$105
6 PC Combo of these proven hole cutters, with 12mm Shank in our most called
for sizes. 18mm D.O.C. Combo includes: 16, 18, 22, 25, 32 & 38mm cutters
3801040
O
OMB
RC
UTTE
$175
SIX C
7022180
3801060
$125
3801020
$29.95
$225
1/2dr 40-210Nm
TORQUE WRENCH
3801030
1/2dr 40-210Nm
13-30mm
TORQUE WRENCH
11PC SET
0232
W000
TOPTUL TORQUE
• Calibration certificate included
• CR-V/CR-MO steel ratchet head
• Equip flip reverse ratchet action function
• Unique push to lock/pull to unlock scale setting feature
• Ergonomically designed TPR material anti slip handle
• Complete in a plastic storage case
$275
3801090
SI-20126 COMPACT
DIE GRINDER
• Medium-size industrial unit with
Feather touch throttle lever.
• Rubberised body
• Collet: 6mm
• No-Load Speed: 25,000RPM
• Overall Length: 170mm
• Avg. Air Consumption: 4.0CFM
$179
SI-1490A 1/2”
IMPACT WRENCH
• 1/2” Square Drive
• T valve trigger for easy speed control
• Twin hammer clutch
• Max. Torque: 850Nm (627ftlb)
• Bolt Capacity: M20
• Net Weight: 1.90kg
• Overall Length: 175mm
W0000218
SI-4160 INLINE
NEEDLE SCALER
W0000219
SI-5505 3/8” AIR DRILL
PERF
ECT
LOCA HOLE
TION
• Solid composite body
• Planetary gearbox
• Variable speed trigger
• Chuck: 10mm keyless
• Drilling Capacity: 10mm
• No-Load Speed: 1,900RPM
• Net Weight: 0.75kg
$199
W0000217
SUTTON SPOTTING DRILL SET
Accurate positioning and perfect hole location
• Precision drill for machine use
• Rigid design for ‘seat’ position accuracy
• 90 degree offers hole chamfering and spotting with the one tool
• Made from HSS Co.
• TiN coated
• Precise point geometry
2526220
• Sizes 6,8,10, 12 & 16mm
W0000220
FACOM “T” HANDLE HEX KEY SET
84TC.J5PB
84TC.J5P• Set of 5 Tee-Handled Hexagon Keys.
• Hex profile at each end
• Burnished tipped - with chrome finish
Set contains:
Sizes 3, 4, 5, 6, & 8mm
$149
3651120
6
EM520 series handheld infrared thermometer is
designed for quick, basic temperature checks.
Just aim the laser sighting at the centre of your target,
pull the trigger, and read the temperature on the LCD.
$425
$319
INFRARED NON CONTACT THERMOMETER
• Fast effective unit for all descaling
applications, rubberised grip.
• Stroke length: Max 4.5mm
• Free Blow Speed: 3,300spm
• Weight: 2.19kg
• Noise Level: 95.5dBA
Order Online at www.tradetools.co.nz
BRAMLEY LINISHALL BENCH
MACHINES
$149
The Linishall Heavy-duty Industrial Bench
Machines are the first choice for all
applications where reliability, long-life and
usability are important. Unique adjustable
eye shields with magnifying glass assist in
safe, accurate finishing or roughing of all
types of componentry, tooling, etc.
Features:
• Wheel dresser
• Adjustable oval eyeshields
with magnifying glass
• Cast metal tool rests
• Adjustable work light
• Pre-loaded bearings
(no end play)
• 6" – 0.45 kW (0.6 HP) motor
• 8" – 0.75 kW (1 HP) motor
• 10" – 0.9 kW (1.2 HP) motor
• 2850 rpm
• Heavy sheetmetal wheel
guards (where applicable)
HIGH SPEED STEEL, HIGH QUALITY,
METRIC SPLIT DIE AND DIE NUT SETS
• Forget “easy wear” carbon steel imitations
• Sizes M3 – M12
DIE NUT SETS
WAS $140, NOW
100
$
This handheld infrared gun also offers a dot laser
sighting feature.
Range:-20°C to 520°C / -4°F to 968°F
SPLIT DIE SETS
WAS $150, NOW
110
$
6455600
$85
6492600
3028240
ROSCAMAT TAPPING ARMS
• Heavy duty cast aluminium construction
• Utilises tap adaptors for quick change
options available
• Vertical tapping
• Vertical & horizontal tapping (VH)
• Single speed, variable or multi speed models
• Automatic tool lubrication
W0000233
W0000234
W0000235
W0000236
3350580
3350600
150mm Bench Grinder
200mm Bench Grinder
250mm Bench Grinder
Spindle Buffer
Linisher/Grinder
915/50 Linishing attachment
We accept
BG6
BG8
BG10
BG8Buff
BG8L
036
$174
$298
$446
$354
$596
$298
Model
200
400
Mosquito
Reach/Height
940 x 660mm
1100 x 685mm
760 x 510mm
Capacity
M14
M22
M14
RPM opt
350/750
90-2100
300/600
Power
Air
Air
240V
CONTACT TRADETOOLS FOR MORE DETAILS
Made in Spain
All prices exclude GST
0800 4 TOOLS [email protected]
Phone in your order: 0800 4 TOOLS
7
TED
I
LIM
R
E
OFF
SET
$699
$699
W0000237
TOPTUL HD PANEL REPAIR SET
HASSAY SAVAGE
7 PIECE METRIC DIN
STANDARD BROACH SET
• Hassay Savage Precision Quality Broaches
• M2 HSS Steel Keyway Broaches for long life
• Our most popular metric sizes all in
one package
W0000??
Set contains:
• Light Shrinking Hammer
(Flat Face + Milled Square Face)
• Standard Bumping Hammer
• Pick & Finishing Hammer (Crowned Face)
• Curved Dolly
• Toe Dolly
• Heel Dolly
• Ultility Dolly
CRC BRAKLEEN
Buy 6 cans of any CRC Brakleen® and receive
a free cooler bag and 210ml CRC Syntex
6pk for only $49.95
W0000223
E
FRE
$275
Set Contains:
• 10 mm Broach
• 12 mm Broach
• 32 mm IV Bushing
• 35 mm IV Bushing
• 38 mm IV Bushing
• 40 mm IV Bushing
• 42 mm IV Bushing
3023060
HINDIN AIR HOSES
8012260
8012270
8012280
10M
20M
30M
$35
$53
$72
EZE-LAP DIAMOND HONE STONES
WELDON CROSS HOLE COUNTERSINK SET
Available in 3 Grits - Fine (red handle),
Medium (purple handle) and Coarse
(black handle) 3/4" x 2" diamond pad.
This versatile tool sharpens, hones or
files any knife or metal. Ideal for knives,
tools, routers, saws, lathe tools.
Made in the USA
Weldon high-speed steel countersinks
and deburring tools are known for
their high quality, unique designs and
outstanding performance. No matter
what material you’re cutting, or what
angle you’re cutting it at, our tools
you’re looking for.
$195
Range 6-27mm Dia
Countersinking
STARRETT 827 SERIES EDGE FINDERS
Work surfaces may be located easily, quickly and
accurately with these edge finders. Work with flat,
straight edges, shoulders, grooves, round work,
studs, dowels or center points and scribed lines – all
can be accurately located with this handy tool. Body
and contacts are made of tool steel, hardened,
ground and lapped to close tolerances for diameter
and concentricity.
1832400
COARSE
$28
MEDIUM
$55
4923300
• Apply that finishing touch with this sanding drum set.
• Ideal for precision finish of intricate scrolls and turning.
• Also great for many other uses.
• 5 sizes of rubber arbors: 1/2”, 3/4”, 1”, 1-1/2”, 2”.
• Comes with 20 pcs of sanding sleeves. 120 grit and 80 grit.
• Can be used with a Cordless/Electric Drill,
or Drill Press.
144-14 ALUMINIUM
ALLOY C-CLAMPS
Length: 360mm
Capacity: 0-180mm
Weight: 870g
$30
• 2-speed gearbox plus variable speed control
• 22-stage adjustable clutch
• 41Nm max torque output
• 2 Li-ion 1.5Ah slide batteries
• 40 min fast charge
• Supplied with driver bit and carry case
$79
W0000238
$299
3325930
W0000239
$48.95
8
Order Online at www.tradetools.co.nz
We accept
All prices exclude GST
3046160 - 10M
3046180 - 20M
3046200 - 30M
SION LEADS
N
E
T
X
E
Y
IT
L
A
U
Q
H.D. INDUSTRIAL NEW ELECTRICAL TEST CERT
A
ALL TAGGED WITH
IP33, 30mA,16Amp. Residual Current Device, (RCD) is suitable for
use with most portable electrical tools and appliances used in the
workshop. When plugged in it will only become active once you have
pressed the RESET button – an important safety feature. Includes
double pole switching giving added safety against faulty wiring.
1120160
144-12 ALUMINIUM
ALLOY C-CLAMPS
Length: 300mm
Capacity: 0-90mm
Weight: 670g
ENSURE YOUR
WORKPLACE
IS FULLY
COMPLIENT
RESIDUAL CURRENT DEVICE
FINE
$55
3230740
1120140
HITACHI DS18DSFL 18V
13mm CORDLESS DRILL & DRIVER
ALUMINIUM ALLOY C-CLAMPS
pivoting.
• Clamps sections for drilling, light milling, etc.
• Comes complete with “T” slot nut.
• 5 Holes in base of tool: Allow fixing on
machinery T-slots or on tables & work benches.
• Knurled swivel pad: Holds tapered work without
damage to pieces.
$30
1120150
25PC RUBBER DRUM SANDING SET
4923360
Grip-on is a pioneer in the development
of locking clamps with hardened aircraft
aluminium alloy jaws. This is a totally
unique category which provides users
with important ergonomic benefits and
which offers several advantages in the
repair of auto body panels, especially
new ones made from aluminium.
Modern ergonomic clamps with
aircraft aluminium alloy jaws for the
professional welder in auto body repair,
metal fabrication and sheet metal work.
$30
3368760
$59
375”, 500” and 10mm Body Diameters
For fast, accurate work location.
LOCK PLIER TEE SLOT CLAMP
222-12 300mm O/A
• Firmly locked or loosely attached for sliding or
E
FRE
Limited offer, only while stocks last
I see you!
SEO 7R LED RECHARGABLE HEADLAMP
SEO
The premium model in the SEO range. The SEO
7R is rechargeable, but also runs on standard AAA
batteries.The SEO 7R offers you the choice of
selecting the Optisense Technology mode, where
the brightness output automatically adjusts to the
ambient light in the surrounding environment,
ensuring you have the right amount of light instantly.
$89.95
3046300
u!
I seeI yseoeIu!syeoeu!yo
SEOSEOSEO
Features:
• Lightweight (only 93 grams)
• Smart Light Technology (SLT) 100% | dim memory
15% – 100% | signal | constant current mode |
energy saving mode
• Advanced Focus System (AFS)
• Adjustable head position
• Glare-free red LED light
• Detachable, washable headband
• Transport lock
• Water resistance IPX6
Comes with:
• Battery pack
• charger
• 3 x AAA batteries
• Carabiner
• Washable headband
• Instruction manual
$129
W0000203
Phone in your order: 0800 4 TOOLS
9
WREN SMC SERIES MECHANICAL
HYDRAULIC CYLINDERS
WREN Hydraulic Cylinder, SMC Series
• Lightweight, low profile cylinder designed to be used
in confined spaces
• Easy to transport / store – designed for the toolbox
• Constructed of high strength alloy steel for durability
and safety
• Integral screw-rod designed hydraulic configuration;
no pumps or hoses required
• Stroke can be controlled precisely with accuracy of
up to 0.01mm
• Five sizes available 5 -50 tonne capacity
1/2 X 3/4” DR
360-1000ftlbs /
460-1400NM
$295
3755880
3/4 x 1” DR
730-2200lbft/10003000Nm
$359
3755900
RICO TORQUE MULTIPLIERS
A device that increases the torque applied by an operator.
These torque multipliers have been designed for where
it is necessary to provide higher torque than would
otherwise be possible, due to limitations on space, or
operator strength. Input to the multiplier is via a ratchet
torque wrench (not supplied) set to one third of the
119
$
10.0T
20.0T
W0000242
W0000243
W0000244
$395 $475 $495
30.0T
$550
W0000245
50.0T
$595
W0000246
Buy any one of these great STARRETT Holesaw sets and get a BONUS Step ladder FREE
.00
+GST
2120460
$230
desired output. The ratio is a 3:1 torque multiplication.
Supplied in kit form that includes a multiplier head,
cranked reaction bar, straight reaction bar, and carrying
case. Robust construction ensures long life with
minimal maintenance.
6051143
$299
$175
W0000156
Buy either of these
PREMIUM Digital Calipers
& have a PREMIUM beer on us!
5.0T
Insize 300mm Digi Caliper
+ 2x 6pk’s Heineken
W0000247
MOAK HOLESAW KIT
Multi-purpose holesaw set including
TCT saws for fast cutting of Plastics,
MDF, AC sheet, fibreglass and most
other non-ferrous materials, plus Bi-metal saws for Steel. Bi-metal
saws: 16, 20, 25, 32, 40, 51mm
Carbide tipped saws: 40, 51, 54, 73, 76, 83, 92, 95mm Arbors: A1E, A17-38E.
$135
W0000241
Insize 200mm Digi Caliper
+ 1x 6pk Heineken
$79
W0000240
KDP2000P
Dual Pitch Plumbers Hole Saw Kit
Bi-metal Hole Saws 19, 22, 29, 38,
44, 51 & 57mm. A1 & A10 Arbors,
A7 Ejector Spring.
KCSC2000G
THINWALL HOLESAW SET
These unique thin wall hole saws are constructed
of heat & abrasion resisting High Speed Steel with a
tough alloy body & cap. Designed especially for cordless
power tools they will cut twice as many holes per battery
E
FRE
charge. Perfect for stainless and mild steel sheet
metal they cut faster, stay cooler, and last longer than
traditional bi metal hole saws. Safety stop formed into
kg
150
the base prevents “over run“ and damage to other
elex esMan
d
n
I
d
components. Complete assembly no need for an
US!
Tra
BON Sided dder
arbor / mandrel. Constant Pitch 8tpi cuts a very
e
l
a
l
b
smooth hole. Split point pilot drill - no need to pre
Dou 3 step
drill stainless steels. Cutting depth 13mm. The kit
contains the following: 16, 20, 22, 25, 29, 30, 32,
38mm plus a Quick Change Connector.
SUTTON 6PC MILLING CUTTER SETS
DIGITAL CALIPER
FACOM LOCKING PLIERS
Resolution: 0.01mm/0.0005”, buttons: on/off, zero, mm/inch, automatic
power off, move the digital unit to turn on power, battery CR2032, USB
data output, Meet DIN862 and made of stainless steel.
LARGE DEEP JAW 270mm
Slip Jaw to provide large grip
capacity that locks to any
shape, constantly parallel
jaws, accommodating up to:
135mm round, 125mm AF
hex & 70mm angle.
$110
HIGH QUALITY MEASURING AT
GREAT PRICING
2152-10 DIGITAL BORE GAUGE
6-10mm x 48mm REACH
Perfect way for accurately measuring
diameter & consistency of small holes.
$259
4829116
4602-20 BLADE FEELER GAUGE
0.05mm - 1.00mm x 100mm
3230200
LONG NOSE 150mm
• Graduation 0.01mm
• Carbide measuring faces
16 5
$
0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35,
0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70,
0.75, 0.80, 0.85, 0.90, 0.95 & 1.00mm
Made of hardened alloy steel.
$10.50
4834260
4911260
OUTSIDE MICROMETERS 6PC SET
3203-1506A 0-150mm
• Graduation: 0.01mm
• Carbide measuring faces
• Meet DIN863
• Supplied with setting standards
(except 0-25mm)
$
Automatic lock-grip pliers, with
Patented automatic closing
mechanism. Automatically adjusts
the jaws to the component,
regardless of size and with the
same pressure.
MICROMETER INT TUBULAR
50-300 0.01mm 3222-300 INSIZE
rods, L=maximum measuring length (mm)
• Supplied with setting standards
Great multi use sets to have in any workshop
• For general milling of slots & cavities
• Suitable for materials up to 850 N/mm2
• For soft steels & non-ferrous material
$68
3230260
SHORT NOSE 225mm
Automatic lock-grip pliers,
with Patented automatic
closing mechanism.
Automatically adjusts the
jaws to the component,
regardless of size
and with the same
pressure.
SLOT DRILL
SET SD2M
6 piece 4, 5, 6,
8, 10, 12mm
$150
W0000224
END MILL SET
EM2M
6 piece 4, 5, 6,
8, 10, 12mm
$120
W0000225
$70
3230360
243.75
4913400
10
Order Online at www.tradetools.co.nz
We accept
All prices exclude GST
Phone in your order: 0800 4 TOOLS
11
W0000248
$25.50
W0000250
$39.95
W0000251
StripX wheels are ideal for surface preparation of
metal surfaces prior to painting or other finishing,
cleaning up welds, injection moulds and gasket
removal leaving a smoother finish than the
traditional wire brush. Excellent for rust removal
and removing paint coatings from metal and timber
surfaces without gouging when used correctly. The
Purple StripX has a stiffer construction and is more
aggressive and durable than the Black StripX disc. 1046590 1046660 1046680 1047080 1047090 1047810 2500KG X 9MTR - 50MM BINDERS
• 50mm Heavy Duty Webbing
• 2500 kg SWL
• 9mtr length
• Heavy Duty Ratchet Handle
Complies to AS/NZ 4380:2001
100 x 16 Purple
$10
115 x 22 Black$10
115 x 22 Purple
$10
125 x 22 Black
$12
125 x 22 Purple
$14
180 x 22 Purple
$28
SUTTON SOLID
CARBIDE DRILLS!
Available in 3xD & 5xD, through
coolant and non through coolant.
• Sizes 3.0mm – 13.0mm in 0.5mm increments
plus Tapping sizes ex stock.
• Total range available includes 0.1mm steps up to
13mm & intermediate sizes up to 20mm.
• Suitable for materials up to 1400N/mm2
• Strong core with & without internal coolant supply
• Micro geometry & surface conditioning for optimal
chip control
• AlCrN for maximum tool life
• R30 Helix
w
lo
Be
W0000249
S&G STRIP-X DC DISCS
es
ic
Pr
$14.50
1500KG X 6MTR - 35MM BINDERS
• 35mm Heavy Duty Webbing
• 1500 kg SWL
• 6mtr length
• Heavy Duty Ratchet Handle
Complies to AS/NZ 4380:2001
S-Line’s Ratcheting Cargo Bar can be used for multiple light
duty applications. This bar has an easy glide tube design for
superior ease of use and a soft grip padded ratchet handle
for comfort. The silver vein and chromate weather resistant
finish makes this product very durable and there is no
assembly required. Perfect for restraining loose equipment
on utes and trailers. Working range 1016 – 1778mm.
k
ec
Ch
$12.50
SL125 CARGO BARS
750KG X 5M - 25MM BINDERS
• 25mm Heavy Duty Webbing
• 750 kg SWL
• 5mtr length
• Heavy Duty Ratchet Handle
Complies to AS/NZ 4380:2001
DRILLING DEPTH
FACOM CRIMPERS
STANDARD CRIMPING PLIERS
For insulated terminals • Integral wire-cutter
• Insulated terminals 1.5-2.5-6 mm²
• Bare terminals 1.5-2.5-6 mm²
• Strips wires 0.75 to 6 mm²
RATCHET CRIMPING PLIERS
For cable terminals
• 3 patterns:
(0.5 – 1.5 mm²)
(1.5 – 2.5 mm²)
(4 - 6 mm²)
• Tensile strength as
per IEC 760.
• Length : 230 mm
$44
$95
3224120
3224100
CIMDRAULIC® 32/46/68/150
RECOIL TRADE SERIES KITS
Kits Include:
• High Speed Steel Drill
• HSS STI Tap
• Combination Tap and Installation Tool*
• Magnetic Tang Removal Tool
• Quantity of Inserts
• Easy to follow instructions
• All contained in a quality case
*Kit contents differ depending
on thread form and diameter
FF
O
30 LL KITS
%
A
High Performance Hydraulic Oil
Premium grade hydraulic oil designed for industrial
hydraulic systems and fluid power transmission
systems.
Features & Benefits
• Thermal stability – Resistant to degradation and sludge
formation improving system reliability and cleanliness
• Oxidation resistant – Extending fluid life and oil drain
intervals, providing overall savings in fluid costs and
waste oil disposal
• Outstanding anti-wear properties – Extends the life of
pump and system components, reducing downtime
and saving costs on replacement parts
• Excellent water separation – resists the formation of
emulsions, thus preventing hydraulic system and
pump damage
• Multi metal compatibility – Protects ferrous and non
ferrous system components from corrosion
• Low foaming – helps to minimize system cavitation
to provide constant pressure transmission
RATCHET CRIMPING PLIERS
For insulated terminals 985895
• 5 patterns:
(0.5 – 0.75 mm²)
(1 – 1.5 mm²)
(2.5, 4 & 6 mm²)
• Tensile strength as per
IEC 63-023.
• Length : 230 mm
$110
3224110
CIMGLIDE® 68 is a specially formulated MACHINE
TOOL lubricant for all horizontal slideways.
Meeting the Cincinnati Machine P47 Specification, it
combines mineral oil and extreme pressure additives
to assist in eliminating stick-slip to ensure machines
run at their optimal performance.
3x Dia
3.0mm with 6mm Shank
4.0mm with 6mm Shank
5.0mm with 6mm Shank
6.0mm with 6mm Shank
7.0mm with 8mm Shank
8.0mm with 8mm Shank
9.0mm with 10mm Shank
10.0mm with 10mm Shank
11.0mm with 12mm Shank
12.0mmwith 12mm Shank
13.0mm with 14mm Shank
$52.57
$52.51
$52.51
$52.51
$52.51
$52.51
$58.92
$58.92
$87.81
$87.81
$117.80
Thru Coolant - IK
$66.37
$71.78
$71.78
$97.45
$97.45
$97.45
$109.25
$109.25
$156.37
$156.37
$208.60
5x Dia
5x Dia
$58.80
$58.80
$58.80
$58.80
$60.90
$60.90
$64.40
$64.40
$96.60
$96.60
$132.75
Thru Coolant - IK
$85.68
$92.16
$92.16
$92.16
$101.82
$101.82
$116.73
$116.73
$170.35
$170.35
$218.74
FREE BLADE JOINING
WHEN YOU BUY ANY BAHCO BANDSAW BLADE
Available in the following sizes:
2831295 Cimglide Slideway 5L
$32
2831300 Cimglide Slideway 20L $105
2831310 Cimglide Slideway 200L $800
NILFISK AERO 25-21
Industrial HD wet and dry vacuum,
with a push and clean filter cleaning
system. Full wet and dry accessory kit
with metal suction tubes, hose and
crevice tool & on-board
tool storage.
• Capacity 25L
• Airflow 3600 L/min
• Vacuum Pressure 190 bar
• Motor Power 1400W
• Noise Level 67dBA
• 24 Month Warranty
ALL GRADES AVAILABLE IN 20 & 205L DRUMS
A FULL RANGE OF LONG & EXTRA LONG DRILLS
Order Online at www.tradetools.co.nz
3x Dia
NB: 0.5MM INCREMENTS AND TAPPING SIZES ALSO AVAILABLE EX STOCK
Suitable for use in the following machine tool
applications:
• Horizontal slideways Feed mechanisms
• Tables, Gear boxes & Hydraulic systems
• CIMGLIDE® 68 is designed for minimal impact on
water based metalworking fluids.
CIMGLIDE SLIDEWAY OIL
12
R30 SOLID CARBIDE DRILLS
AlCrN Coated
$389
3350160
• Small Increments
• Straight & Taper Shank
• Met/Imp
We accept
All prices exclude GST
TOPTUL 3/8DR 34PC
COMBINATION AF/MM
SOCKET SET
• 6PT Flank Sockets: 8, 10, 12,
13, 14, 16, 17, 18, 19, 21, 22 mm
• 6PT Flank Sockets: 5/16”,3/8”,7
/16”,1/2”,9/16”,5/8”,11/16”,3/4”,
25/32”,13/16”,7/8”
• Spark Plug Sockets
16 & 21mm
• Reversible Ratchet
Handle with Quick
Release
• Extension Bar - 3”,
6”, 10” (L)
• Sliding THandle with
Quick
Release
• Swivel
Handle
• Universal Joint
• Speed Brace
• 1/4”(F) x 3/8”(M) Adaptor
• 1/4” Dr. Spinner Handle
$159
3806020
Phone in your order: 0800 4 TOOLS
13
• A dry transparent, amber waxy film that
provides long term corrosion protection
for metal surfaces
• Will not wash or wipe off
• Provides protection from heat, humidity
chemicals or corrosive atmospheres
• Will not attack plastic, rubber, paint or
insulation material
2850210
300gm Aerosol 2850220 4L Bulk Pack
CRC 5.56 INDUSTRIAL (WITH TEFLON)
CRC TAC 2 ADHESIVE
LUBRICANT
CRC SOFT SEAL
• A high performance lubricant based
on heavy-duty high-pressure gear oil
• Lubricates and protects gears,
sprockets, chains and sliding parts
in industrial applications
• Excellent resistance to fling-off at
high speeds and temperatures
• Resistance to cold, hot and salt
water wash-off
• High load capacity
$15.50
$129
2850580 300gm Aerosol
ice
s Pr
a
ristm
Ch
sh
Sma
ARC COMMANDER 6000V
Grind mode & low amp tig capable
High Definition - 100x67mm Viewing Panel
Technical Data:
• Reaction Time: 0.04m/sec (1/25,000)
• Weld Mode: Variable Shade 8 -14
• Sensitivity Setting: Adjustable
• Delay Control:
Low 0.05sec - Fast 0.08sec
• Auto On/Off
• Power Supply: 2 x 3v Lithium (CR2032)
• Battery Life 2000Hr Approximate
• Sensors: 4 x with Pre Shading
• Operating Temperature: -05°C to 55°C
Standards ANSI Z87.1 / DIN / CE / TUV
Premium Helmet
Price Deal!
$346.96
W0000254
• A high performance variant of CRC 5.56
fortified with PTFE for improved lubrication
performance
• Non-Flammable making it safe for industrial
applications
• Performs extremely well when frequent
start/stop or alternating movements occur
2850495
550ml Aerosol
W0000252 4L Bulk Pack
$12.50
$52.60
Non-slip handle and ergonomically positioned
controls for precise and accurate operation.
Rugged nickel-plated cast alloy base plate. Quick
release blade change system. Removable dust
extraction adaptor can
be connected to an
external dust collector
for a cleaner work environment
and to maintain good vision of the
blade. When dust extraction is not
being used, a built-in blower redirects
airflow from the fan and blows dust
away from the cutting area.
• Powerful 720W motor
•
4-stage orbital cutting action
• 26mm stroke
Made from high-speed tool steel. These
robust tools can be centred, drill in
and out and de-burr in one motion. The
deep-cut grooves of the stepped bit
offer a clean drive and great cutting
performance.
4-20mm x2mm
$
53.90
2429220
$15
4-30mm x 2mm
XA-MIG200C-SP COMPACT 200AMP
MIG/MMA/TIG INVERTER WELDER PACKAGE
Includes MIG Torch 3m, regulator and ARC set, Bonus Kitset
Machine Trolley & T-Shirt
Features:
• Latest IGBT inverter technology
• Mig/Mag with Gas and Gasless wire function
• Stick Electrode (MMA) function
• DC Tig Welding with Lift Arc Function
• Digital Amp - Volt Meters
• Internal wire feeder for up to 200mm Ø spool
• Tolerant to variable power supply
• Seamless voltage and wire feed control
• Excellent mig welding with CO2 gas
• Excellent arc stability with all electrodes
• Spool Gun Connection
Technical Data:
• Power Supply / Phases (V-Ph):
240v - 1 +/- 15%
• Duty Cycle 25°c (approximate):
60% @ 200 Amps MIG,
60% @ 200 Amps MMA/TIG
• Wire Diameter Range:
(mm) 0.6, 0.8, 0.9
• Dimensions (LxWxH):
528x250x425mm
$1420
88
$
XA-ARC130-SP 130 MMA/TIG DC
INVERTER WELDER
Starter kit with bonus auto helmet, gloves, and welders tshirt
New Model fitted with approved 10 amp Plug
Features:
• Latest IGBT inverter technology
• MMA (stick electrode)
- Hot start (improves electrode starting)
- Arc Force (boosts current to prevent electrode extinguishing)
- Excellent arc stability with all electrodes
• DC Tig with Lift Arc Fuction
• Thermal overload protection
• Generator compatible (recommend 6.0 KVA minimum)
• Tolerant to variable power supplies
• Fitted with and approved to use domestic 10 amp plug
Technical Data:
• Power Supply / Phases:
(V-Ph): 240V - 1 ±15%
• Welding Current Range: 10~130A
• Duty Cycle @ 25ºC (approximate):
40% @130Amps MMA,
40%@130Amps TIG
• Size:
290 x 115 x 200mm
XCELARC 4.5KG GASLESS MIG WIRE
E71T-GS GASLESS
WIRE 0.9MM X 4.5KG
$95
8226565
E71T-GS GASLESS
WIRE 0.8MM X 4.5KG
$102
8226545
2429250
6-38mm x 2mm
139
$
$
2429260
BONUS 115mm
ANGLE GRINDER!!
344
3325340
E
Backed by Hitachi’s Heavy Duty 3 Year Warranty.
FRE
3 TON FLOOR JACK c/w AXLE STANDS
Axle stands
• 3 Ton capacity
• Min Height: 285mm
• Max Height: 425mm
• Ratchet type for fine adjustment with double
locking protection
• Large saddle, unitized frame construction,
ductile iron rack
Safety standards conform to ANSI/ASME
Floor Jack
• 3 Ton capacity
• Min Height : 85mm - Max Height : 455mm
• Dimensions : 640 x 342 x 174mm
Safety standards conform to CE GS-TUV
$546.95
W0000253
8310240
TIG Torch is optional and extra
Includes 24 Month Warranty (machine only)
• No Shielding Gas Needed
• Single Pass Welding of Thin
Gauge Galvanized Steel
• Excellent for Outdoor Use
• Smooth Arc – Minimal Spatter
• DC- Straight Polarity
• Works Well in Windy Conditions
• International Approvals
HITACHI 720W BARREL GRIP JIGSAW
RUKO STEP DRILLS
HYDRAULIC PULLER SET
TIG Torch is optional and extra
Includes 24 Month Warranty (machine only)
XCELARC OPTIONAL TIG TORCH KITS
XATK1 & XATK2
Includes: 4 meter valved Suregrip® Tig Torch,
Argon Regulator and Spares Kit
W0000255 16-25 Twistlok End W0000256 35-50 Twistlok End • 10 ton hydraulic ram
• 3 x 100mm Leg
• 3 x 150mm Leg
• 3 x 200mm Leg
• Twin head and triple head
• Extension rods 25 x 50mm and 25 x 100mm
• 4 x 200mm Main rod
• Beam
• 75-105mm Bearing separator
$
$243.48
$243.48
$
239
199
W0000260
3480600
KK7612 KINCROME MULTI STORAGE CASE SET 4 DRAWER
• Heavy Duty Metal Multi-Storage Cases
including 20 Compartments in each.
• Steel construction
• UV stablised powder coated finish
• Foam padded internal lid
• 4 Friction slide drawer cradles (holds 4 Multi Storage Cases)
• Internal rear locking system to prevent drawers from accidently opening
• Can be mounted to Walls, Vans, Utes, Under Benches and stacked
• 20 Removable Coloured Storage Tubs
• Ideal for storing Nuts, Bolts, Washers, O-rings, Screws, Nails, Rivets, Spare
parts, Fuses, Grease Nipples, Eyelets & Much More…
• Measurements: 410mm x 325mm x 300mm
$249
W0000257
14
Order Online at www.tradetools.co.nz
18V CORDLESS GREASE GUN
4 POCKET
$69
W0000258
KINCROME ALLWEATHER BAGS
• Constructed from rip/tear resistant material
8 POCKET
• Fire retardant and UV treated
• Designed and made for harsh mine conditions
• Reinforced base
W0000259
• Double stitching
• Heavy duty shoulder strap
• Double velcro lids on all pockets
• Straps and plastic clip style buckles on lid
• High visibility reflective strips on lids and side pockets
• 4 External pockets
• Centre divider
• Internal tool loops
• Clear internal lid pocket for paperwork
$139
We accept
AIR OPERATED GREASE GUN
• Suits 450gram cartridge
• Develops up to 10,000 psi
• 75gram per minute volume grease
flow
• 1 hour quick charge
• 2 x 18V long-life NiCad batteries
included
• 1m heavy duty high pressure hose
• Up to 5 cartridges of grease on a
single charge of the battery
• Three-way loading - cartridge, bulk
grease or filler pump
• Heavy duty plastic storage case
• Shoulder strap
$229
W0000261
All prices exclude GST
$73.90
2837635
• Suits 450gram cartridges
• Develops up to 6,000 psi
• 3600 angle-free head rotation
• Continuous flow
• Three-way loading - cartridge, bulk
grease or filler pump
• High pressure
• Heavy duty construction
LEVER ACTION DRUM PUMP
60LTR & 205LTR
$63
2837195
• Suits 205L and 60L drums
• 250cc per stroke
• Suitable for diesel, oil, kerosene, coolant and ATF
• Can also be used for other light to medium
viscosity lubricants
• Quality mechanism
• Dual bung threads for both drum types
Phone in your order: 0800 4 TOOLS
15
HIGH FEED
THREAD
MILLING
MILLING
Q&
QA& A
Q. What is Thread Milling?
A. Thread Milling is a versatile, reliable and cost
effective process for the manufacture of internal
and external threads. It does, however, require
machines with feed drive and a suitable
3D control, so that the tool can carry out the
necessary helical interpolation movement.
Q. Why should I use Thread Milling over
Tapping?
A. The advantages of Thread Milling include
better chip control, precise thread depth and
a superior thread. Another big benefit is that
Thread Milling can reduce costs considerably,
since a variety of threads can be produced with
a single tool. This allows you to do:
• Different dimensions with the same pitch
• Blind and through hole threads
• Right-hand and left-hand threads
• Difference Tolerance classes
Q. What’s the difference between a Solid
Carbide and an Indexable Insert type?
A. The two types cover different applications.
Firstly the Solid Carbide Thread Milling Cutters
are for the production of threads from as small
as M1.6x0.35. The Indexable Insert Type is used
for bigger threads up to 6.0mm pitch or 4 TPI.
Q. What types of Thread Milling Cutters can I get?
A. There are three main types of Thread Milling
Cutters available. These are the Solid Carbide
Thread Milling Cutter, Solid Carbide Drill /
Threading Milling cutter which will drill and then
thread the hole and the Indexable Insert
type. Thread Milling can also be achieved by
using a single point tool such as an Internal
Threading bar.
TIPS & TRICKS
Q. Why should I use Solid Carbide Thread
Milling Cutters over inexpensive HSS Taps?
A. The investment you make in Solid Carbide
Thread Mills certainly pays off. The same
tool does different diameter threads, left or
right hand and for different material types.
Increased tool reliability is achieved due to
better chip control. Productivity gains can be
made because of high machining speeds and
feeds. There’s reduced machine wear as no
spindle reversal is needed. Dry machining is
possible due to coated cutters. Regrinding is
also possible, achieving tool cost reduction.
These cutters can also be used on hardened
workpieces up to 57 HRc.
Q. How do the Indexable Thread Milling
Cutters compare to the Solid Carbide?
A. The same principle applies, just a different
tool. The insert cutters are ideal for the
manufacture of threads for small to large
batches. They are the most economical option
for small batch sizes. They can be used for all
low to high tensile materials, both short and
long chipping. With only a toolholder
and a few inserts
it is possible to
produce a diverse
range of thread
types, tolerances and
dimensions. Easy
to load inserts are
double sided and
at up to 40mm long
means increased
thread length
capacity for most
pitches. The advantages of Indexable Thread
Milling include the high quality inserts and
carbide grade for extra toughness and wear
resistance in all materials, meaning high cutting
speeds and better tool life. These tools offer high
cutting stability and minimum profile distortion,
even with large pitches. Thread Milling large
threads requires far less power to produce a
thread than the equivalent tap.
Q. How do I program these cutters?
A. Programming can be done by using the
current machine cycle and calculating your
feed rate, radial infeed etc. Alternatively you
can take all the guesswork out and use the
software available. This software eliminates
complicated programs and calculations. With
minimal input the program selects the optimum
cutter, identifies the best operating parameters,
and then downloads the information to your
CNC machine. This offers maximum tool life,
better chip control, reduced production time
and a perfect thread from the very first cut.
Other advantages include built-in logic that can
program a 90o or 180o arc into your cut when
needed, to eliminate vibrations and selects
radial and axial cut options. This software is
available free of charge from Trade Tools Ltd.
If you have any pearls of wisdom or simple tricks you’ve learned (either the hard way, or by rubbing shoulders with “experts”…that you are
keen to share with the masses, by all means forward them through to [email protected], or pass on to your rep when he next calls.
Broken centre drill
Counter bore depth
We’ve all been there… That sickening
“crunch” as the end of the centre drill
parts company with the rest of it and
lodges in the workpiece! Now this
might seem obvious to some, but we
thought it worth passing on that by
simply grinding a relieved “vee” in the
drill body (see inset). You create a tool
that drills around the
broken remnant, leaving
a ‘column’ that is much
simpler to remove, ready
for a new centre to be
drilled.
A simple rule of thumb and a time
saver here. When counterboring
for metric caps screws, it’s worth
noting that the height of the cap
screw head is always the same as
the nominal thread size ie; M8 has
a 8.0 mm high head.
“Warming” a ceramic insert
When using ceramic inserts you should
always offer the insert up to the job and
let it “rub” for a second or two to get the
insert (and the material to be cut) up
to temperature so there is less thermal
shock for the insert. In doing this the
(usually hard) material gets up past it’s
upper critical temperature so can be
Check out the SECO High Feed Milling Demonstration video on YouTube http://bit.ly/15jlw5D
machined
as desired.
0800 4 TOOLS •
www.tradetools.co.nz
DISCLAIMER: We are a fair minded company and try to exceed the requirements of fair trading legislation in NZ. All Prices exclude GST and are current at the time of publication.
Stocks however may not always be available, but we can generally offer a substitute if you contact us to discuss. Errors and omissions can happen too; the images printed are
sometimes generic (and may in the odd case be completely incorrect). Once again if it looks wrong or too good to be true, contact us so we can set the record straight!