illumitex Versa Accessories

VMT002-8: 8” Mounting Stake
GENERAL DESCRIPTION
The VMT002-8 is intended for use with Illumitex Versa
VS and VM low-voltage machine accents in grade
mount landscaping applications
SPECIFICATIONS
• Durable injection-molded plastic construction
• Molded black finish
• ½” – 14 NPS threaded mounting hole with
molded wire-way slot
• Solid, flat-top for driving into soil
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMT003: Large Junction Box
GENERAL DESCRIPTION
The VMT003 is intended for use with the Illumitex
machined accents where below-grade wiring
connections are required.
SPECIFICATIONS
• Cast aluminum housing and cover with
single ½”–14 NPS machined mounting hole
• Die-cut neoprene gasket
• Stainless steel cover and grounding screws
• Polyester powder-coat paint finish (standard
bronze)
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMT004 – Small Mounting Canopy
GENERAL DESCRIPTION
The VMT004 is a cast aluminum mounting canopy
intended for use with the Illumitex Versa machined
accents in tree, soffit or wall mounted applications.
SPECIFICATIONS
• Cast aluminum construction
• Polyester powder-coat paint finish (standard color
is bronze; also available in black—please specify)
• ½”-14 NPS machined fixture mounting hole
• (2) 0.25” O.D. mounting holes (mounting
hardware not included)
• (4) Cast wire entry channels on back side
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMT005 – Large Mounting Canopy
GENERAL DESCRIPTION
The VMT005 is a cast aluminum mounting canopy and
intended for use with the Illumitex Versa machined
accents in soffit or wall mounted applications.
SPECIFICATIONS
• Die-cast aluminum construction
• Polyester powder-coat paint finish (standard color
is bronze, also available in black—please specify)
• Stainless steel ground screw supplied
• Mounting hardware supplied by others
• Die-cut black foam rubber gasket
• ¼” – 14 NPS machined mounting hole
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMT007: Brass Junction Box
GENERAL DESCRIPTION
The VMT007 brass junction box is intended for use
with Illumitex’s Versa machined accents when belowgrade wiring connections in harsh environments is
required.
SPECIFICATIONS
•
•
•
•
•
Cast brass housing & cover
Molded silicone rubber gasket
Stainless steel fasteners
Cast internal ground boss
½” – 14 NPS machined mounting hole for Versa
accents
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMTRP: Perma Post
GENERAL DESCRIPTION
The VMTRP1 and VMTRP2 were designed for use with
the Illumitex Versa machined accents in loose or sandy
soil where more stability is needed.
SPECIFICATIONS
• Cast aluminum mounting cap, machined to ½” 14 NPS
• Polyester powder-coat paint finish (standard color
is bronze; also available in black—please specify)
• Stainless steel hardware
• 3” O.D. PVC stake and extruded PVC stabilizers
• Internal 120V to 12V class 2 transformer
(VMTRP2 only); short circuit protection; 90C max
case temp
½” -14 NPT machined
3” O.D. PVC stake
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMTWP: Wall Plate
GENERAL DESCRIPTION
The VMTWP2 and VMTWP3 were developed for use in
soffit or wall mount applications of one or two Versa
machined accents.
SPECIFICATIONS
• Machined aluminum mounting canopy for one or
two accent fixtures
• Polyesther powder-coat paint finish (specify black,
bronze or silver)
• ½” – 14 NPS machined fixture mounting hole
(one or two)
• (4) 0.20” O.D. Mounting holes with 0.40” countersink (mounting hardware not included)
• Molded, black silicone rubber gasket included
• Integrated 120VAC-12VAC transformer for (-T)
versions
When ordering, please specify finish:
CA = Clear
BK = Black
BZ = Bronze
Model No.
Fixture Count
Transformer
VMTWP2
Single
No
VMTWP2-T
Single
Yes
VMTWP3
Double
No
VMTWP3-T
Double
Yes
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
VMTWP5: Straight Arm with Wall Plate
GENERAL DESCRIPTION
The VMTWP5 is designed for use with the Illumitex
Versa machined accents for wall mounted sign
lighting applications.
SPECIFICATIONS
• Machined aluminum mounting canopy
• ½” aluminum pipe (0.84” O.D.) stem (available
in 6, 12 or 18” lengths—please specify)
• Polyester powder-coat paint finish (specify
black, bronze or silver)
• Machined aluminum coupler with ½” – 14 NPS
machined end for Versa fixture mounting
• (4) 0.20” O.D. mounting holes with 0.40” O.D.
counter-sink (mounting hardware not included)
• Molded, black silicone rubber gasket included
• Integrated 120VAC-12VAC transformer for (-T)
versions
6, 12, or 18”
ORDERING GUIDE
Model
VMTWP5
Stem Length
Finish
Voltage
6=6”
SV=Silver
Blank=12V
12=12”
BK=Black
18=18”
BZ=Bronze
Illumitex.com
5307 Industrial Oaks Blvd., Suite 100
Austin, Texas 78735
Tel: 512.279.5020
Copyright© 2014, Illumitex, Inc.
The information in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be
Changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof d oes not convey
Nor imply any license under patent – or other industrial or intellectual property rights. Patent information may be found at www.illumitex.com
-T=120V