read more - Plaster Center

Transcription

T exturline
Earth Friendly Decorative Surfaces
Protek Paint Ltd
335 Horner Avenue
Toronto Ontario
L5S 1G1 Canada
Web sites:
www.texturline.com:. www.protekpaint.com . www.roxatone.com. www.microcolor.com
Based in Toronto Canada, Protek Manufacturing Company offers hi-tech water based environmentally friendly
technologies and solutions, such as Texturline decorative plaster veneers, specialty paints, colour dispersions,
protective sealers, Intumescent paint and multicolor seamless coatings.
Mission Statement
We, at Texturline, are convinced that THE WORDS AND DEEDS statement correctly reflects the universal and
honest attitude that we have towards the profession practiced by us. Our ultimate goal is to provide our Customers with top quality services. Such services establish positive relations and credibility between us and customers. Trust induces good will, which being prerequisite for involvement and loyalty forms bonds founded on
rational and emotional factors. It seems that a clear mission becomes more and more valuable, especially in a
dynamically evolving market. The ability to create such a lasting relationship is a unique result of everyday
work based on words and deeds. Our technical team is leading the industry with innovative products that fill
the needs of our diverse client base, out front in non-pollutive coatings
INDEX OF CONTENTS
CTRL + CLICK TO FOLLOW LINK >
Stone Textures
Page 3
Polished Plasters
Page 4
Imported lime plasters
Page 5
Structural Textures and reliefs
Page 6
Glazes And Washes
Page 7
Specialty Coatings
Pages 8/9
Color cards of finishes
Pages 10/13
Site photos of plasters
Pages 14/17
Stucco Italiano Catalogue
Pages 18/23
Stucco Italiano Catalogue data and how to.
Pages 24/32
2
TEXTURLINE PAINT YOU CAN FEEL
BACK
Stone Textures Selection
Visualize the sandstone bluffs of Carolina, sculptured and
pitted by coastal winds, in some areas protected and less exposed, the feel and appearance has been transformed into a
smooth honed stone by rain and time.
Carolina can produce effects like this on walls, the way it’s applied will reflect the look you desire.
Carolina Sandstone plaster comes ready to apply in two forms, trowel and a roller grade.
The latter can be sprayed and smoothed, also when combined with Aquaglass crackle undercoat
create aged weathered stone. The texture can be smoothed easily and can simulate Marmorino for interior
décor.
The two stone finishes below compliment one another like twins but each with its own distinct character.
Intonachino is an exterior/interior yet breathable opaque natural lime based coating.
Texturstone is more suited for interior decorative stone and is acrylic based allowing tape removal when
fully dry.
Intonachino lime plaster imported from Italy, the dream material for all structural finishes; it will go on any surface and
transform the aspect into stone. The ease of application is
only surpassed by its durability and easy maintenance. Turn
that old fireplace into a focal point of original beauty, add a
new identity to alcoves and moldings and make entrance
hallway or walls look like something out of a 16th century
European castle. The product is at home on exteriors as well
as interiors and has no VOC or toxic chemicals being a natural product. It has 4 grades: x fine - fine - medium - coarse.
Packaging is in 24kg pails and can be purchased in 4 kg sizes
Texturstone that has a few attributes that add to its abilities
to create stone in ways that allow artistic impression to run
loose. Texturstone allows glazes to soak in enough to obtain
realistic stone looks.
It flows so it can be brushed more easily on moldings. When
smoothing it can be applied very smooth or very textured as
required. It has 2 grades x fine and fine to allow all types of
stone to be created with simple tools. 24kg and 6 kg sizes.
3
BACK
Texturline polished plasters
Venetiano lime base coating, recreates plaster used in
Venice to compliment luxurious marbles that adorned
the walls in the Palaces of the Doges. It has endured
through time to be today’s unrivaled fashion leader in
wall finishes. The feel of its smooth tactile, dare we say
sensual surface, with its dimensional integrated colour,
oozes luxury and quality. Prized by those that have a
wall of this artistic creation, desired by those who don’t,
it fits every 21st Century modern decorating scheme.
Venetiano lime based polished plaster applied in the traditional way, that is with trowels and Japan spatulas, in the hands of an expert, is breathtaking. That does not mean the average painter cannot complete
this finish to a high standard, with a little practice and learning from one of our on line teaching tools, good
results will always be attained. Texturline offers training North America and Europe so that you can hone
the skills required to become a qualified tradesperson.
Spatulato is lovely sister to burnished Venetian plaster,
it is very similar application, however for Spatulato the
burnishing and polishing is replaced with a topcoat of
tinted Texturtop wax.
This system is by far the easiest and quickest method to
produce an acrylic venetian plaster as its self polishing
tinted waxing system tones and shines all in one application.
The two finishes above & below though a slight step below in skill level of Venetiano, they are none the
less of the highest standard. The experience required to apply them is well within the abilities of anybody
who has prepared wall for painting with spackle or drywall compound. The tools required are the same and
execution is fast and easy by virtue of the product , that allows wet to wet application, with no mess ups.
The material dries fast and using a cross hatch method there are no overlap lines on the finished décor.
To complete this trio Acrylic Stucco Antico the most
popular polished plaster we ever introduced to the north
American market. Easy to apply, versatile in every way
and exhibits all the quality of a lime based plaster without all the hype.
Texturline has sold enough of this product to coat a wall
wrapped around the earth many times. Why choose it
over the completion, as Paul Shivkumar of Artifex Studio
once put it “It has never failed me.”
That speaks for itself as his sample does>>>>>>>>
4
BACK
Texturline Imported polished plasters
Marmorino is well known as a classic Venetian plaster. However, its origins are much older, dating to
ancient Roman times. We can see evidence of it today in the villas of Pompeii and in various Roman
structures. In addition, it was written about in Vitruvius's “De Architectura”, a 1st Century B.C. history
of Rome. Marmorino was rediscovered centuries
later after the discovery of Vitruvius's ancient treatise in the 15th century. This „new‟ plaster conformed well to the classical ideal that had recently
became fashionable in the 15th century Venetian lagoon area.
Unlike the marble it has a single soft color with small shadings. A natural material, it is made of
lime and ground marble. Hardness and resistance are characteristic to Marmorino, even in moist
environments like a bathroom. Marmorino is highly appreciated for its aesthetic effect, unique
when properly lighted. It is used in sophisticated environments such as reception areas, offices, and
condos. .
Marmorino was generally white to imitate the stone
of Istria, which was most often used in Venetian
construction, but was occasionally decorated with
frescoes to imitate the marble, which Venetian
merchants brought home from their voyages to the
Orient. In this period of the Republic of Venice,
merchants felt obliged to return home bearing precious, exotic marble as a tribute to the beauty of
their own cities
Marmorino Carrara white marble plaster comes in two grades fine and coarse to allow variations.
Also there are additives available to enhance the final result, Coccio pesto (terra cotta), Salt and
pepper sand (black and grey), white Carrara marble. Polishing will hone the finish to a sheen.
Tadelakt comes in a dry form and required the addition of water, the working time is about a
day. It can be colored with pigment and polished to a high sheen.
Enjoying a recent surge of popularity in the architectural and design communities, Tadelakt, for centuries, has been appreciated for its durability and
aesthetically pleasing exotic appearance. Tadelakt
may be used in wet areas such as showers and spas,
as well as on floors and countertops. Originating in
Marrakesh in Morocco this antique finish embellishes the walls of villas and palaces there. The
unique combination of sand, clay and Hydraulic
lime has been taken by the chemists in Italy duplicating the original formula.
5
BACK
Structural textures by Texturline the paint you can feel
Structural texture finishes bring a rich embellishment to any surface adding deep lustrous reflective tones that give a unique character impossible to achieve with any other system.
There are three components, a structuring base,
oxide natural pigments and fast drying waxes.
This allows profiled textures from base to finish
in one day.
The reason Texturline is a leader in structural texture is shown by 20 years of successful installations worldwide. Chosen as a backdrop for many architects reception areas, as a profile for many high tech companies corporate head quarters and the medium used in décor
for films from „James Bond‟ to „Battleship Galactica‟ to name but two.
Nothing says “we are unique” more than a custom texture, that is unique to an individual or
company, a blend of skill and artistry by professionals in the paint trade.
Special effects metallic textures are easily done
with Texturline using acrylic Venetian plaster as
a base coat with iridescent wax.
The shimmering reflectivity changes colour by
refracting light giving the illusion of dimension
and depth to a flat surface.
The world of faux is now truly your oyster
bringing opalescence to any surface.
Metals have always been a luxury that is an expensive add on to any surface, with Texturline it is possible to metalize and create patinas with a realistic touch. We have created products that simulate metal so effectively that unless you saw it applied you would not know it
from the real thing.
Application require very little training or special tools and amazingly it dries very fast allowing many coats and patinas in a one day application.
Metallic effects are a series of mica pigmented
waxes that do not tarnish or fade. By combining
these with Venetian acrylic base a fast metallic
structure over any surface can be created.
Gold, copper, silver, bronze, pewter and many
other metals can be created to make any ordinary surface extraordinary.
6
BACK
Water based glazes, extender and washes
Texturline produced two glazes: Glaze extender low VOC
flat washable glaze that has a one hour wet edge for
seamless finishing.
Basic glaze is the second this version shares its use with
the scumble below making this version a duplex as it allows paint and colorant to be mixed in it and has a satin
sheen.
The flat glaze now shares that method of coloration.
Texturline has recently made changes to it‟s glaze lineup to fall in line with EU and US state regulations, by
creating products that have a low impact on ozone and global warming. We as a company have voluntarily
illuminated all products from our range that exceed this limit. At the same time we have followed EPA rulings
relative to any ingredients discovered to be toxic or deemed a health danger to humans by illuminating them
from our products.
We will continue to monitor and follow any updates as they are published and react accordingly, offering the
best products available today on both continents.
Scumble is an English term that means to apply transparent colour over an opaque base tone. Used extensively by
skilled tradespersons to create faux marble and
woodgrain.
Texturline has a slow drying product. This version will
allow blending and toning for positive application and
fast recoating.
Supplied as a clear medium and dries to a satin sheen
and coloring can be done using universal colorants.
We are producing a DVD series on washes, glazes and scumble, as we feel due to the reduction in the use of
propylene glycol USP, a foodstuff ingredient that we use to extend the open time of acrylic paints, it‟s about
time. We are of the opinion that product knowledge is essential to successful applications in these changing
times.
We will show how to take the fear out of washes drying and creating lap lines in a zero voc method. Glazing
made easy coupled with some realistic marble and graining methods.
Stonewash Powder Pigments are the ultimate system to create those intricate details or to color-wash plaster quickly,
with just a hint of color.
Definitely the most effective way to create visual texture
over plasters: 14 Colors plus black and white
providing an wide color pallet, also create pastel tones using a simple blend of 50/50 color with white. Unlimited colors can be made by blending any of the colors .
7
BACK
Specialty Paints and coatings
Moiré is the latest creation from Texturline and probably one of the most sophisticated finishes we have ever
launched. It as two distinct aspects, the first an opalescent highly reflective pearl under a veiled overlaid texture. Its resemblance to oriental silk becomes apparent
after two coats are applied. The gold subtle reflective
look of iridescence is the second one. Both can be tinted
to any colour by adding universal colorants.
The most advanced finish Texturline has ever created not only its ease of application but the
refined effect it adds to any décor. It has client appeal straight out of the gate, satisfaction is
guaranteed due to the subtle effect moiré delivers.
Aquaglass is not only a complementary product to our line but stands alone as one of the best
crackle mediums on the market. It has ultimate control with its ability to crack any latex paint as
well as Texturline plasters.
Aquaglass is a premium universal cracking medium
that can create large structural cracks in our plasters as
well as latex paint.
Unlike other systems on the market it delays initial reaction to allow large surfaces to be treated.
Texturline also sells a reactive agent to increase the size
of the plates as well as spacing in the cracks.
This system is only available in gallons but conserves
for up to 2 years unopened or correctly resealed.
There are metal paints and then there is Metaltech the solution that works when painting walls,
ceilings or just about any surfaces. Two coats over primer is generally enough leaving a seamless
metallic coating in any custom colour or from our designer pallet. Custom tinted for you from
bases by one of our distributors, no waiting always in stock.
Metaltech is a complete painting system in metallic a
wide range of colours. The system comprises of three
bases: gold/silver/pearl that accept universal tint to create an unlimited colour range.
It can be rolled, brushes and sprayed covering a tinted
primer in two coats without lap lines.
It use is restricted to interior surfaces if a protective coat
of varnish is not applied over it.
8
BACK
Specialty Paints and coatings
Zero Gloss dead flat varnish describes this product to a
tee. It is non reflective so therefore ideal for studio and
cinema requirements. It does not change the colour of
the paint or plaster its applied over. It is washable with
good resistance forming a flexible film that can be rolled
for artwork.
It is not recommended for exterior protection of murals
as they require at least two weeks curing to prevent
blushing.
Texturline offers a full compliment of primers that when coupled with our product range help in
the easy fast application making a solid bond to most substrates.
Sharktooth primer is a keyed coating that reduces the application time and will bond our products
to glossy surfaces. Its high opacity will cover any colour in one coat prior to application of our
plasters. Texprime is a drywall sealer that has the same keyed texture to bond easily many plasters efficiently.
Texturline Satin Varnish is an acrylic varnish suitable
for coating furniture as well as all surfaces that require a
durable finish.
When applied over plaster it can be burnished to a
higher sheen as well as being able to be tinted with universal colorant.
The use of mica powders will produce a translucent
shimmering topcoat over certain other Texturline products.
Texturline lime-proof primer is an exterior primer to go over existing stucco so that it can be correctly coated with limewash without risk of delaminating. It has the ability to bond to any surface
at the same time giving a correct mechanical bond for the lime allowing it to perform and age
correctly.
Traditional Limewash is a North American take on the
coating used to protect building in Europe for at least
2000 years. Though is forms a decorative coating over
many surfaces, it does not age like acrylic paints. It does
not peel as it is a mineral based material, water can
penetrate it and over time will oxidize the lime turning
it into limestone. Part of its charm is the gradual aging
of the surface causing the lime to blush adding the desirable polychromatic component.
9
BACK
Metaltech
The hard resistant metallic paint that will change surfaces into a hi-tech
decorative protective surface. With all the above qualities a green coating
with zero VOC and environment friendly.
10
BAC
Moiré Pearl base
Moiré is the easiest washable lustrous suede finish on the market today
available in 105 formulated finishes created from two bases while you wait
at one of our dealers in the US and Canada.
11
BACK
Moiré Iridescent gold base
Moiré is the easiest washable lustrous suede finish on the market today
available in 105 formulated finishes created from two bases while you wait
at one of our dealers in the US and Canada.
12
BACK
Texturline Specialty Paints and coatings
Below are some samples of Texturbase which is a universal medium that can be used in a multitude of ways
covering all aspects of texturing. Going from the top left horizontally row by row the samples below are as follows: Texturbase with a pigment wash sealed with Zero Gloss, Texturbase coated with Texturtop white tinted,
Texturbase cross-hatched burnished and waxed, Texturbase rolled and coated copper wax followed by a wash,
Texturbase troweled and washed, Texturbase rolled and knocked down washed with Metaltech pearl, Texturbase spatula masked, partial wax and washed, Texturbase rolled and flattened then backfilled and burnished,
Texturbase troweled to simulate Marmorino…………….. And we could go on.
Texturbase the most versatile mineral plaster on the market
13
13
Texturline
BACK
Moiré IRI Gold
14
T exturline
BACK
TEXTURSTONE
15
BACK
Marmorino Classic
Stucco Italiano
16
Stucco Italiano
BACK
Tadelakt
Stucco Italiano
Marmorino Carrara
17
Made in Italy
BACK
18
BAC
History of Marmorino
Marmorino is well known as a classic venetian plaster; however, its origins are much older,
dating to ancient Roman times. We can see evidence of it today in the villas of Pompei and in
various Roman structures. In addition, it was also written about in Vitruvius's "De Architectura", a 1st Century B.C. history of Rome. Marmorino was rediscovered centuries later after
the discovery of Vitruvius's ancient treatise in the 15th century. This 'new' plaster conformed
well to the aesthetic requirements dictated by the classical ideal that in the 15th century had
recently become fashionable in the Venetian lagoon area.
The first record of work being done with Marmorino is a building contract with the nuns of
Santa Chiara of Murano in 1473. In this document, it is written that before the Marmorino
could be applied, the wall had to be prepared with a mortar made of lime and "coccio pesto" (ground terra cotta). This "coccio pesto" was then excavated from tailings of bricks or recycled from old roof tiles.
At this point, to better understand the popularity of Marmorino in Venetian life two facts need
to be considered. The first is that in a city that extends over water, the transport of sand for
making plaster and the disposal of tailings was, and still is, a huge problem. So, the use of
Marmorino was successful not only because the substrate was prepared using terra cotta
scraps, but also the finish, Marmorino, was made with leftover stone and marble, which were
in great abundance at that time. These ground discards were mixed with lime to create Marmorino. Besides, Marmorino and substrates made of "coccio pesto" resisted the ambient dampness of the lagoon better than almost any other plaster. The first because it is extremely breathable by virtue of the kind of lime used (the only lime which sets on exposure to air after loosing excess water) and the second, because it contains terracotta which when added to lime
makes the mixture hydraulic, that is, it's effective even in very damp conditions (because it
contains silica and aluminum, bases of modern cement and hydraulic lime preparations). The
second consideration is that an aesthetically pleasing result could be achieved in an era dominated by the return of a classical Greco-Roman style allowing less weight to be transmitted to
the foundation when compared to the habit of covering facades with slabs of stone.
Usually, Marmorino was white to imitate the stone of Istria, which was most often used in Venetian construction, but was occasionally decorated with frescoes to imitate the marble, which
Venetian merchants brought home from their voyages to the Orient. (In this fascinating period
of the Republic of Venice, merchants felt obliged to return home bearing precious, exotic marble as a tribute to the beauty of their own city.)
Marmorino maintained its prestige for centuries until the end of the 1800’s when interest in it
faded and was considered only an economical solution to the use of marble. Only at the end of
the 1970’s, thanks in part to the architect, Carlo Scarpa’s use of Marmorino, did this finishing
technique return to the interest of the best modern architects.
For about 10 years, industries were also interested in Marmorino which was only by produced
by artisans. Today, however, ready-to-use Marmorino can be found, often with glue added to
allow them to be applied on non-traditional surfaces such as drywall or wood paneling.
19
BACK
20
BACK
21
BACK
22
BACK
23
Marmorino Carrara
Description: This finish is smooth with a variable degree of luster depending on how much it has
been burnished. Marmorino Carrara is suitable for both interior and exterior surfaces.
Composition: Slaked lime, marble powder in grains and additives.
Packaging: 24 kg. net (52.911 lb) polyethylene containers 4 kg. net (8.18 lb) polyethylene containers.
The product is white and can be tinted with UTC Color Systems.
Theoretical yield: Full 2.5 coat cycle for polished Carrara finish: Metric: Approximately 1300-1800
grams per square meter, i.e. 13-18 square meters per 24 kg bucket. U.S.: Approximately 150-200
square feet per 24 kg bucket.
Step by step coverage:
1st coat: Metric: Approximately 800-1000 grams per square meter, i.e. 24-30 square meters per
24 kg bucket. U.S.: Approximately 260-320 square feet per 24 kg bucket.
Note: There is generally no need to color the material for the first coat
2nd Coat - Step One Metric: Approximately 400-600 grams per square meter, i.e. 40-60 square
meters per 24 kg bucket. U.S.: Approximately 430-650 square feet per 24 kg bucket.
2nd Coat - Step Two (Polishing Coat) Metric: Approximately 100-200 grams per square meter,
i.e. 120-240 square meters per 24 kg bucket. U.S.: Approximately 1200-2400 square feet per 24
kg bucket.
24
How to apply Marmorino Classic:
BACK
Before application: Protection of the work area: Masking tape and protective material over the baseboards and
around windows and doors. Don‟t apply in temperatures below 5°C (41°F).
Remember to have a strong light parallel to the wall and situated on only one of the two sides of the wall you
are working on (usually on the same side other sources of light come from such as the windows). In this way the
shadow of the trowel allows you to see the actual state of the finish.
The first coat applied can be either white or colored plaster. The first coat is applied with a metal trowel using
visible strokes, which will be the underlying base for the final coats. This coat is applied thickly, using about 1lb of
material per square foot. The aim in laying the first coat is to obtain a thick, absorbent layer on which to spread the
successive coats.
When the first coat has completely dried, normally by the next day, the second coat is carefully applied
with a large metal trowel using 12 ozs per square foot. Always keep in mind that the aim of this coat is to lay the
smoothest and most uniform surface possible, being careful to avoid creating shiny areas. Since shiny areas can
cause problems when applying the successive coat, it is necessary to work with a light touch, without pressing too
hard; maintain a 40° angle with the blade of the trowel. If application of a single second coat does not give you a
smooth, even surface, you should apply another coat immediately before the second coat dries. We suggest applying this additional second coat especially when the desired finish is to have little texture or when you want to
achieve a superior, quality job.
While you can apply the final coat as soon as the second coat begins to dry, most people prefer to wait for
the second coat to dry completely because of the risk of peeling. Apply the last coat in a thin layer to small areas
(max. 10 square ft.) with a large, or better yet, medium-sized metal trowel. Normally, you should start high on the
wall (on either the right- preferred by the left handed- or the left side –preferred by the right-handed- of the wall).
When you are swiping on one trowel application after another, the trowel swipes should be in a different direction
than the previous one each time, so that you obtain a harmonious design. At the beginning of each swipe, the
trowel should be at a 30-35° angle to the wall moving toward the plaster you have already laid. As you continue
the swiping movement, you immediately remove excess material by changing the angle of the trowel to 40-45°
while moving toward the area you have previous laid. In this way you keep the newly-laid plaster thin enough over
the previous applications while shining the area of contact between the newly-laid plaster and the area you have
already polished. Since the material on your spatula dries out over time, occasionally you will need to scrape the
thickened material off, disposing of it, and replacing it with fresh plaster.
To achieve seamless application when moving from one section to the other you need to proceed both horizontally and vertically. Normally, the application should continue until the wall is completely finished. If the wall is
large, you will need more than one person to apply the finish; otherwise, you risk leaving unsightly overlapping
marks.
With this coat, proceed to the final polishing, going over the surface repeatedly with a clean metal trowel
moved in different directions. Be sure the edges of the trowel blade are always smooth by using P240-360 sandpaper. If 3 people are working, it‟s best that 2 people apply the material with a quick polishing and the 3rd person
only polish. Before it dries, finish by buffing it with a soft fabric cloth.
Important note: While applying the third coat, but especially during the polishing phase, be careful to
move the trowel with the back of the trowel directly following in the path of the front of the trowel. That is,
the movement of the trowel MUST NOT be perpendicular to the trowel‟s handle, but parallel to it. If this is not possible, then the trowel‟s movement on the wall should form a 45° angle with respect to its axis (handle).
The aim of the third coat is to obtain a smooth and shiny surface (shiny meaning that the porosity has been
reduced as much as possible). You need to understand that when the material begins to dry, it shrinks, opening
up micro-pores. The more micro-pores there are, the less shiny the surface will be. If the third coat is too thick,
either by mistake or by necessity (in the case where the previous coat was not smooth enough), the finish might
not be shiny enough. To avoid this, it may be preferable to apply the third coat in two layers. First, by applying a
quick coat without polishing to a square-meter area, and then by applying another again, this time completing the
polishing as described above.
Interiors: After a minimum of 24 hours, at least one coat of the following can be applied: A coat of Natural Bee‟s
Wax to obtain waterproofing and a general protection against dirt. It makes the surface shinier. A coat of Marseille
Soap waterproofing. This does not make the surface look shinier.
25
BACK
Unlike the marble it has a single soft color with small shadings. A natural material, it is made of lime and
ground marble. Hardness and resistance are characteristic to Marmorino, even in moist environments like the
Venetian lagoon. Marmorino is highly appreciated for its aesthetic effect, unique when properly lighted. It is
used in sophisticated environments such as reception areas, offices, and villas. It is used in the bathroom as an alternative to marble and ceramic.
Description: The surface of the Classic finishing is glossy shining with a lot of depth. The finish maintains a
soft texture: the movement between the darks and the lights is gradual and the surface reflects the light very
well. The workmanship may or may not be visible depending on the application.
Composition: Slaked lime, very smooth marble powder and special additives
Packaging: 20kg. net (44lb) polyethylene containers 5 kg. net (11 lb) polyethylene containers The product is
white and can be tinted with UTC Color System.
Theoretical yield: Full 2.5 coat cycle for polished Classic finish: Metric: Approximately 800-1000 grams per
square meter, i.e. 20-25 square meters per 20 kg bucket. U.S.: Approximately 210-260 square feet per 20kg
bucket.
Step by step coverage:
1st coat: Metric: Approximately 500-600 grams per square meter, i.e. 40-48 square meters per 20kg bucket.
U.S.: Approximately 440-520 square feet per 20 kg bucket. There is generally no need to color the material
for the first coat.
2nd Coat - Step One Metric: Approximately 220-300 grams per square meter, i.e. 80-110 square meters per
20 kg bucket. U.S.: Approximately 880-1000 square feet per 20kg bucket.
2nd Coat - Step Two (Polishing Coat) Metric: Approximately 80-100 grams per square meter, i.e. 240-300
square meters per 20kg bucket. U.S.: Approximately 2500-3300 square feet per 20kg bucket. Use theoretical yields as a guide only - actual spread rates will vary depending on surface conditions and application techniques.
26
Marmorino Carrara:
BACK
Before application: Protection of the work area: Tape around all baseboards, doors and windows before
beginning work. The first coat applied can be either white or colored plaster. Don‟t apply in temperatures below 5°C (41°F).
Remember to have a strong light source parallel to the wall and situated on only one of the two sides of
the wall you are working on (usually on the same side other sources of light come from such as the windows).
In this way the shadow of the trowel allows you to see the actual state of the finish. Every so often, during the
second and third coat, the light should be moved so that the wall doesn‟t dry out too much in one spot from
the heat of the lamp.
The first coat is applied with a metal trowel using visible strokes, which will be the underlying base for
the final coats. This coat is applied thickly, using about 950/ 1000 grams of material per square meter. The
aim in laying the first coat is to obtain a thick, absorbent layer on which to spread the successive coats.
When the first coat has completely dried, normally by the next day, the second coat is carefully applied with a large metal trowel using 750 / 800 grams per square meter. Always keep in mind that the aim
of this coat is to lay the smoothest and most uniform surface possible, being careful to avoid the creation of
shiny areas. Since shiny areas can cause problems when applying the successive coats, it is necessary to
work with a light touch, without pressing too hard; maintain a 40° angle with the blade of the trowel. If a single
second coat does not succeed in obtaining a smooth, even surface, you should apply another coat before the
second coat begins to dry. We suggest applying this additional second coat especially when the desired finish
is to have little or no texture or when you want to achieve a superior quality job.
During all the application of the three coats keep a strong light parallel to the wall. To avoid problems
removing the masking tape at the end of the job, it is best to replace all the tape when the first coat is almost
or completely dry.
As soon as the second coat begins to dry you can apply (wet into wet, so that the granules of marble can
penetrate into the previously applied coat) the last one in very thin layer (80–100 grams per m2) to small areas (max. 1 m2) with a large, or better yet, medium-sized metal trowel. Normally, you should start high on the
wall (on either the right- preferred by left handed- or the left side –preferred by right-hand people- of the wall)
swiping on one trowel application after another; each time, the trowel swipe should be in a different direction
than the previous one so that you obtain a harmonious design. At the beginning of each swipe, the blade of
the trowel should be at a 30–35° angle to the wall moving toward the plaster you have already laid. As you
continue the swiping movement, you immediately remove excess material by changing the angle of the spatula to 40–45° while moving toward the area you have previous laid. In this way you keep the newly-laid plaster thin enough over the previous applications while shining the area of contact between the newly-laid plaster
and the area you have already polished. Since the material on your spatula dries out over time, occasionally
you will need to scrape the thickened material off, disposing of it, and replacing it with fresh plaster.
To achieve seamless application when moving from one section to the other you need to proceed both
horizontally and vertically. Normally, the application should continue until the wall is completely finished. If the
wall is large, you will need more than one person to apply the finish; otherwise, you risk leaving unsightly
overlapping marks,
With this coat, proceed to the final polishing, going over the surface repeatedly with a clean metal trowel.
Be sure the edges of the blade of the trowel are always even by using P240–360 sandpaper. Occasionally,
go back to the last square meter and burnish all of it. For a more highly polished finish we suggest burnishing
at the end (after burnished with the metal trowel and before it's dry) using a plastic trowel (prepared with
rounded edges) and then with a soft fabric cloth. If 3 people are working, it‟s best that 2 people apply the material with a quick polishing and the 3rd person only polish.
Important note: While applying the third coat, but especially during the polishing phase be careful to
move the trowel with the back of the trowel directly following in the path of the front of the trowel.
That is, the movement of the trowel MUST NOT be perpendicular to the trowel‟s handle, but parallel to it. If
this is not possible, then the trowel‟s movement on the wall should form a 45° angle with respect to the its
axis (the handle).
With Carrara, once it is completely dry, but not before 24 hours have passed, we suggest using our
Natural Bee’s Wax, colored with the same pigment you used for the stucco. It makes the finish more refined
( “richer”), reducing light spots.
27
BACK
Composition:
Powdered slaked lime (35%), marble dust aggregate with variable particle size, water and additives (less than
2% total in wet volume).
There are four grades available:
INTONACHINO EXTRA FINE, With marble grains from 0.0 to 0.5mm
INTONACHINO FINE, With marble grains from 0.0 to 0.7mm
INTONACHINO MEDIUM, With marble grains from 0.0 to 0.9mm
INTONACHINO GROSSO ( Coarse), With marble grains from 0.0 to 1.1mm
Packaging:
24 kg, 52.9 lb polyethylene containers
The product is white and can be tinted with UTC Color System.
Theoretical Yield:
X-fine - 125 - 175 sq ft per 24kg fine - 100 - 150 sq ft per 24kg medium - 75 - 125 sq ft per 24kg
coarse - 50 - 100 sq ft per 24kg
-Apply the first coat with a metal trowel being careful to apply evenly over the entire surface. Let it dry completely.
-Apply the second coat, being careful to proceed seamlessly from one work area to another. A few minutes after applying the second coat, wipe over the entire surface with a dry sponge trowel to make the surface uniform. It may be best to perform this step
twice: once immediately after application of the Intonachino, and then again after a few minutes. The dry sponge trowel can be
scraped clean with a metal trowel from time to time.
-To obtain a chiaroscuro effect of light and dark shades, you can use a wet sponge trowel. Some areas will be wetter than others.
The wetter areas will appear lighter in tone because the water will have deposited lime on the surface.
Don’t apply in temperatures below 5° C. (41° F.)
During application be sure the work area isn’t too damp or warm to avoid problems with application time
28
BACK
Enjoying a recent surge of popularity in the architectural and design communities, Tadelakt, for centuries, has been appreciated for its durability and aesthetically pleasing exotic appearance. Tadelakt
may be used in wet areas such as showers and spas, as well as on floors and countertops.
Description: Tadelakt has a smooth appearance, slightly shiny like Marmorino Carrara, but thicker
and less textured. Tadelakt is very durable and quite water resistant, but breathable.
Composition: Lime powder, slightly hydraulic, with stone granules of variable thickness up to 1,2
mm. special additives facilitate application, by aiding in adhesion and reducing cracking. White - can
be tinted.
Packaging: 18 kg Polyethylene containers
Theoretical yield: Full 2.5 coat cycle for polished finish: Metric: Approximately 6-7 square meters per 18 kg
bucket. U.S.: Approximately 65-75 square feet per 18 kg bucket. Mixed volume in 24kg using 1½ gal. of water
How to apply:
The preparation of the substrate is similar to that used with Stucco Italiano Marmorino Carrara. The ideal substrate is new plaster composed of lime, a little cement and sand. It can also be applied over old substrates as
long as there is no crumbling and it has been treated with a Lime tolerant primer .
Mix an 18 kg. container material with about 1½ gallons of water. Once the material is well-mixed, it
can be colored and then left to rest for about a half an hour. It can then be applied, either that day or
the next. (The material will still be good for several days if it is kept in a sealed container away from
heat. However, it‟s best to apply it within 2 or 3 days.)
After the substrate has been prepared, the first coat, tinted or not (white), is applied with a metal trowel. (With
the traditional Moroccan method, it is applied with a tool similar to a Swiss trowel which leaves a slightly wavy
surface.) Let the first coat dry completely (overnight). Remember that part of the pattern that is left in the first
coat will be visible in the finished work.
Before beginning the second coat, we advise, as we do in the instructions for Marmorino Carrara, to replace
all the protective tape. For the second coat, apply the material with the color of your preference with a large,
metal trowel. As with Marmorino Carrara, it should be applied over the entire surface smoothing out any
marks left by the trowel, keeping in mind that any marks left at this stage with remain visible in the final surface. (For those wishing for a completely smooth surface, pass over the entire surface with a with a sponge
float.)
Let it dry a little until it loses its shine, which is due to an excess of water. In some places you will see a slight
lightening of the color. At this point you can apply the third coat using the same material and the same big
trowel, or a smaller one if you chose. The important thing is to use a trowel with sharp edges. Apply a thin
layer, pressing (unifying) the second and the third coat into one thickness. You will have to pass over the surface numerous times, always moving the trowel in different directions until you achieved the desired finish. If
you see bubbles appear during this stage, you‟ll need to wait a little more before the final burnishing stage .
It may be advantageous at the final stage of polishing to use a plastic trowel, especially with lighter colors, to
avoid burning the surface. At this point in traditional Moroccan applications, the burnishing is done with a polished stone that, given its round shape, allows the artisan to follow the wavy surface which has been created
in the preceding coats with the Swiss-type trowel.
When the Tadelakt is completely dry, usually after one or more days, it can be protected with a special
Moroccan soap (the same one which is still used in the public, Moroccan baths) which is made from olive oil.
The soap is spread as is, or diluted up to 100%, with as much water as desired. Since this soap is very dark,
we advise that it be well-diluted when applied on light colors in order to avoid unwanted discolorations. Normally it should be applied with a metal trowel, rubbing it on the surface until it is completely absorbed. Any
excess soap can be removed using a cloth after about 10 minutes.
29
Additives and Waxes
BACK
How to use Terracotta Powder: -Add the contents of a 400gram container to a bucket of Marmorino Classic or Marmorino Carrara for use during application of the final coat. It is
not necessary to add any to the previous coats. -Add the terracotta just before applying it. The material should be used
within a few days because terracotta makes the lime hydraulic, and it could, therefore, harden inside the bucket.
(Terracotta is made of clay and what distinguishes slaked lime
from hydraulic lime is the presence of clay.) It‟s especially effective when used in conjunction with yellow, ivory and light
terracotta colors. It is normal that small pieces of uncrushed
terracotta will leave small scratches on the surface of the finHow to use Salt & Pepper Sand: -Add the silica sand to Marmorino Carrara, during the second and third coats. The recommended proportion is one sack of silica sand to one 24 kg
container of Marmorino Carrara. -The Marmorino Carrara is
applied normally. -It is also possible use it with Marmorino
Classic: Pour 2 sacks of sand into a container of Carrara and
apply this as the first coat. -Wait until the material is 50% dry
and smooth out the surface with a sponge float (the right time
to do that is easy to judge). -Let it dry completely (24 hours),
and then finish it with two coats of Classic. For this finish, it is
strongly recommended that you use Texprime before applying
the first coat so that the substrate is rough enough to work
well with the sponge float.
Marble Powder
When to use Marble Powder: One of the best methods for
smoothing a texture Marmorino Carrara or Marmorino Classic
is to add some marble powder to the first and second coats (a
maximum of 10% of the total weight, that is, 2 kg. in a 24 kg
Marmorino tub). The addition of marble powder prevents the
product from shrinking so much when it dries, which in turn
ensures a smooth first and second coat. Marble Powder can
also be added to a first coat when it is too rough or irregular.
The addition of marble powder does not change the color of
the material.
Where to use Densifier: It is used on lime-based products.
Why use Densifier: This product is normally used when the plaster has become too thin because of excessive use of a liquid colorant.
How to use Densifier: -The product should be slowly poured in the bucket while mixing the material with the
beater. Once all the Densifier has been added, continue to mix for another minute, then let it rest for a half an
hour. -Normally a 50 gr. is enough to thicken one 24 KG bucket. But if necessary, you can add up to 3 times
of Densifier. -Remember that all lime-based products tend to thicken over time, so keep this in mind if the
plaster will be applied several hours after mixing.
30
oil and basic mineral salts such as soda.
Packaging:
100 grams tubs
Theoretical yield:
65 - 75 sq. ft. per 200 gram container
BACK
How to apply Moroccan Soap for Tadelakt:
Apply to the surface of completely dried Tadelakt with a metal trowel. Go over it several
times so that it penetrates and impregnates
the surface. The double action of the soap provides waterproofing and brightens up the colors.
First, because the soap combines with the
lime creating a fat molecule swelling in water,
the surface becomes impermeable to water.
And second, the olive oil not only brightens the
colors, but works as a waterproofing agent as
well.
Cultural Interest:
In Moroccan baths, Moroccan soap is renowned for its exfoliating properties. A key part in the hammam ritual, Moroccan soap is rubbed vigorously onto the skin with either a hand mitt or loofa before being thoroughly
rinsed off to leave the skin smooth and supple. After being wrapped in a large towel and remaining in this
steam bath, bathers finally retire to the cooling-room for a period of relaxation.
Product Description
Cera Liquid Wax (Natural Bees' Wax)
Cera Bees‟ wax is an easy to apply, water-based wax. It is useful because it doesn‟t change the appearance of a lime-based finish. It provides a light protection against liquid and dirt, while increasing the
shine.
This is mineral wax made of paraffin diluted in a water based emulsion.
It can be use to polish and protect all smooth surfaces such as Marmorino. As with all mineral waxes it alters
the appearance of the surface slightly, giving it a pleasant, light sheen, which some people consider pleasing.
This product gives a high level of protection from splatters and dirt in general. It is recommended for use on
Marmorino when the surface is exposed to extreme dirt situations / high traffic areas, such as shower stalls
and public areas that are prone to get a lot of handprints.
It is also available with a metallic effect with the Gold, Silver, or Copper versions.
Application
Apply a very thin, uniform layer with a metal trowel. It can be polished after a half an hour with a buffer. With
Marmorino, you have to be careful not to leave marks. If too much is applied in one spot without spreading it
well, a dark, greasy spot can appear where the surface has absorbed too much wax. Because of this, it is advisable that you are very careful to spread this wax very thinly, or before applying it, protect the surface first
with a coat of our bee‟s wax.
Yield About 18 sq. m. per liter. Packaging: 1 Quart.
31
BACK
Toronto Canada
Web: www.texturline.com Email: [email protected]
Tel.1 800 773 3233 Local:416 410 3244
T exturline
32
T exturline
CTRL + CLICK TO FOLLOW LINK >
INDEX OF PAGES
Regulations, VOC Levels, Toxicity and EPA. OSHA, DOT.
Texturline: Texturbase ~ Data FAQ
Page 34
Pages 35/36
Texturline: Carolina Sandstone ~ Data FAQ
Page 37
Texturline: Texturstone ~ Calce Veneziano ~ Moiré
Page 38
Texturline: Texturtop ~ Zero Gloss ~ Crackle Systems
Page 39/40
Texturline: Glazes ~ Metal paint ~ Limewash ~ Sundries
Page 41
Tinting based on fan deck
Page 42
Texturbase M.S.D.S. Sheets
Pages 43/44
Texturtop waxes M.S.D.S. Sheets
Pages 45/46
Carolina Sandstone M.S.D.S. Sheets
Pages 47/48
Moiré M.S.D.S. Sheets
Pages 49/50
Glazes M.S.D.S. Sheets
Pages 51/52
Primers M.S.D.S. Sheets
Pages 53/54
Stonewash Pigments M.S.D.S. Sheets
Pages 55/56
Crackles M.S.D.S. Sheets
Pages 57/58
Venetiano M.S.D.S. Sheets
Pages 59/60
Metal paint M.S.D.S. Sheets
Pages 61/62
Page 63
Surface preparation general methods DATA
MSDS Sheets for Stucco Italiano Marmorino / Intonachino / Tadelakt
33
Pages 64/72
BACK
This guide is meant to help in the use of and the varied questions arising from, the application of Texturline
painting and plastering systems.
When introducing Texturline, it‟s important to first define the scope of the products being used. When we say
this we mean explain clearly what the products do and their advantages over conventional methods of texturing attaining similar looks to competitors systems.
Texturline is an acrylic system simulating more conventional oil glazes in paint or traditional lime plasters that
have existed for centuries. We need to clear up the myth that acrylics are toxic and not environmentally
friendly: acrylic plasters have are low or zero in VOC content with emissions under regulated standards, consisting of natural minerals as fillers with no toxic content. To give you a perspective California the leader in
clean air regulations require a rating of 350g per litre for faux finishing products, a number attained by Faux
Effects on their products. Why are any VOC‟s presents at all in Texturline plaster and glazes? The simple answer is to make the products apply easily and be more durable. There are no unpleasant smells or an allergy
problems with Texturline plasters, this is one of the reasons to use this technology.
Do natural products have VOC‟s? The answer sometimes, as many manufacturers add binders to lime and
therefore solvents to coalesce them, these are VOC‟s.
At this point you surely have questions, as most people do not understand the concept of ozone depletion
and global warming, the best thing is giving some sites to read up on. www.epa.gov/iaq/voc.html
Zero VOC - any paint or product with VOC‟s in the range of 5 grams /litre or less can be called "Zero VOC",
according to the EPA . Some manufacturers may claim "Zero-VOC's", but these paints may still use colorants, biocides and fungicides with some VOC's.
Adding a color tint usually brings the VOC level up to 10 grams/litre, which is still quite low.
Low VOC - Low VOC paints, plasters, glazes and varnishes that use water as a carrier instead of petroleumbased solvents. As such, the levels of harmful emissions are lower than solvent-borne surface coatings.
These coatings also contain no, or very low levels, of heavy metals and formaldehyde. The amount of VOC's
varies among different "low-VOC" products, and is listed on the paint can or MSDS. Paints and stains, to
meet EPA standards, must not contain VOCs in excess of 200 grams per litre. As a general rule, low VOC
paints marketed by reputable paint manufacturers usually meet the 50/100 g/L VOC threshold. Paints with
the Green Seal Standard (GS-11) mark are certified lower than 50 g/L (for flat sheen) or 150 g/L (for non-flat
sheen).
Ethylene Glycol - a solvent used in latex paints, is listed as a hazardous substance and a toxic air contaminant under many federal and state regulations. A clear, colorless, odourless liquid, ethylene glycol and its vapour can be toxic to humans. Exposure may cause irritation to the skin, eyes, nose, throat and lungs, and allergic reactions are possible. Over exposure could lead to nausea, vomiting, drowsiness, coma, and respiratory failure. Repeated over exposure can permanently damage the kidneys, the full line of Texturline products is ethylene glycol-free.
VOC Content: Usually listed in grams per litre, this can range from 5 to 200. Using a product with the lowest
VOC content will yield the lowest overall health risk.
Solids Content: Solids, or pigments, can range in concentration from 10% to 100% by volume. The higher
the percent solids, the less volatiles are in the product. Note water is a volatile.
EPA, OSHA, DOT Registrations: When a product has an EPA, OHSA or DOT registration number, this
means that it contains toxic ingredients which must be monitored. One way to ensure that you are using a
product that is safe both for the environment and the applicator is to seek out products which are not registered with these agencies.
34
BACK
PRODUCT ORIENTATION #1
Texturbase mineral acrylic plaster : what is it ?
Texturline workhorse and best selling texturing medium is Texturbase
How do we present a simple paste, that has no clear identity so the applicator and distributor can understand
its uses?
Let‟s examine at a can of Texturbase to examine the contents - turn the can upside down to see the consistency of the material – smell the contents, even touch its consistency. This method is called tactile recognition, coming into contact first hand with the medium. An indicator to the uninitiated that it is environmentally
friendly is the low in odour and we can guarantee as the manufacturer chemically this is a true statement.
“Texturbase is an acrylic paste which dries in 20/30 minutes depending on the thickness of the coat applied.
It can be recoated once the film feels hard and no longer cold. The medium (paste) can be tinted to any colour using conventional tint systems such as universal colorants, any acrylic paint or machine tint (as used in
a paint store). The range of colours that can be obtained is unlimited using different bases allow for deeper
colours. Bases include white, red, black, neutral*.‟‟
(*Neutral does not contain titanium white and allows deeper colours to be made from it).
Texturbase is sold by weight and sizes move up in ratios of four
E.g. 1.5 kg can – 6kg.can – 24 kg pail.
Can and bucket sizes are as follows: US Qt. or 0.946liter US Gallon or 3.78litres - 3.9 US Gallons – 24kg or
15 litres. Note sizes may vary in different counties see the local distributor's web sites
In most cases these are full containers, the exception being red that contain less material to allow for tinting,
5 kg in a US gallon or 3.78 litre cans.
Coverage: 200/250 sq. ft for a 6-kilo can
VOC 60g per litre excluding water
Usage is for interior surfaces only.
Fire rating is classified non-combustible and it does not contribute to smoke in case of a fire. As do all our
products in the plaster group. Class 0 in UK Class B in EU
Clean up and dilution is with water
Dry material removal is by hot water or a light solution of menthol hydrate and water always test for colourfastness of fabrics and carpets.
To render washable apply one of the various top coating systems available from Texturline.
It has a low odour and is environmentally safe though disposal should always be done according to local authority by-laws.
Priming
As this is an acrylic medium we need to seal the substrate with a primer unlike normal plaster where this is
not required. Primers or set coats as often they are called can be any primer that is suitable preparation for
acrylic paint. Texturline manufactures a product called Sharktooth primer /set coat which is keyed, that is it
has tooth. It is especially recommended when going over existing paints which are shinny or on hard styrene
boards when sampling. If you are asked about application over wallpaper, prime with flat oil primer and repair any lifts or bubbles from the substrate. For absorbent or lime bases we recommend our lime tolerant
primer called Texprime which seals absorbent substrates.
Q. Why use a primer that is not smooth?
A. When applying plasters a primer that has a texture allows the first coat to be applied thicker without mud
cracking. The other advantage is the overall number of coats required to create a finish is subsequently reduced, economising time and money.
Q. Why are there two primers?
A. Sharktooth is a primer Texprime is a primer sealer, the difference is primer are designed to bond to most
substrates primer sealers will penetrate a porous surface making it ready to receive a coating.
Q. Can these primers be sprayed?
A. Only if the spray tip is of the correct size and the gun is a HVLP airless equipment could cause injuries in
the same way sandblasting would.
35
BACK
Tools
Application – a variety of tools can be used including commonly the following – trowels, spatulas, putty
knives, drywall knives, sea sponges, rollers, brushes and splatter or texturing equipment.
Q. How is it polished?
A. In most cases with a spatula or trowel in combination with a Texturline acrylic wax.
Q. How much does it cover or in other words what is the spread rate?
A. This all depends on the technique used but in generally 200/250 square feet is usual for spatula finishing
including all coats.
Q. Why couldn‟t I use drywall mud instead to texture?
A. It requires painting to prevent absorption and generally chips and has no possibility of reaching the level
of sheen that can be achieved with Texturbase when polished.
Q. Once it‟s open how long will it keep in the can?
A. If the left over is covered with a plastic film up to a year, if the product remains unopened 3 years.
Q. Heavily textured walls what can we do?
A. The answer is have a plasterer smooth out the wall in cases where the finish requires it, otherwise combine with what exists on the wall with Texturbase to make a mixed effect creating a new look.
Q. How much does it cost and what are its main advantages?
A. To address cost we must look at square footage for a finish, in worst-case scenarios cost is always under
a dollar US a sq. ft. (in the case of UK less than a £10 a meter)
The answer to the second part of the question is time – the timesaving due to fast recoating on multi layering and no sanding (the advantage of less health risk due to dust inhalation) Also mud or drywall compound
is slow to dry and labour cost are expensive. Labour cost added to the final cost to the client will make or
break a finish, so any time saving that can be factored into the bottom line allows you to make more profit
and do more projects long term. The average cost per sq. ft. US is $5.00 in the UK £50 a sq. meter which is
a factor of x5 against material cost. The average surface that can be applied by one person in a day is between 250 sq ft or 25 sq meters, up to 400 sq ft or 40 sq meters depending on finish and difficulty.
Q. Will it chip off corners?
A. Yes! But do you know why? Drywall mud on corner beads under the primer is soft and does not stick to
galvanized steel corner beads and that is often the case. You should sand down to the corner and prime
with a high adhesion primer like „Zinsser BIN‟ it comes in spray cans that are very convenient. Apply the
Texturbase directly over the primer this will not chip under normal use.
Q. How thick can it be applied?
A. In most application we use multi coating of thin layers but fairly thick coats can be used in cases where
high profile dimension is required such as metallic looks. It is not uncommon for antique plaster finishes to
have a mud cracked look this can be done by applying thick coats and accelerating the drying with a hair
dryer.
Q. What is in Texturbase?
A. A high bond acrylic resin, Calcium carbonate or marble flour, clay and a few additives for flow and to preserve it in can and that‟s about all.
Q. Can I tint it with powder pigment?
A. Not easily, unless the pigment is pre-dissolved in an alcohol water mix first.
Q. Can I dilute it?
A. Yes with water depending on the use up to 30%, Texturglaze extender to get more open time.
Q. Can I put in on floors?
36
BACK
Carolina Sandstone
This product is a unique Texturline medium it has all the advantages of Texturbase with the added advantage
of a granular texture.
In general it‟s used to reproduce antique and polished stone and as it contains clays that can be both tinted
and stained, true stone colour and its texture can easily be reproduced. It comes in a paste to accommodate
the varied requirements in finishing, for example when cracked walls are needed best, for embossed stencilling. The tools used for application are either blued steel, stainless trowels and rollers.
Carolina Sandstone is an excellent medium for block walls as masking tapes cut clean joints and can be removed later after all coats have been applied and fully dry. The best method of application is multicoating
rather than trying to apply one thick coat. The instructor should take the opportunity at this time to pass
around some finished samples to show the variations achieved with the product
Packaging: 5.5kilo and 22-kilo containers it has a shelf life of 3 years
Coverage: 150/180 sq. ft for a 5.5-kilo can
VOC 60g per litre excluding water
Usage is for interior surfaces only.
Fire rating is classified non-combustible and it does not contribute to smoke in case of a fire. As do all our
products in the plaster group. Class 0 in UK Class B in EU
Clean up and dilution is with water
Dry material removal is by hot water or a light solution of menthol hydrate and water always test for colourfastness of fabrics and carpets.
To render washable apply one of the various top coating systems available from Texturline.
It has a low odour and is environmentally safe though disposal should always be done according to local bylaws. Again this is a general rule
The above information is a general specification common to all our clay based plasters that include the only
difference is in the container sizes: These may vary in different counties.
General questions on Carolina Sandstone
Q. What are the advantages of this plaster over Texturbase?
A. As with most variations it allows the applicator more freedom to create alternative looks. In this case a
honed stone which is quite different from Texturbase which is perfectly smooth and can be polished to a high
sheen level. The general application is usually followed by application of Texturline flat varnish creating various stone aspects.
Q. Can it be polished?
A. Yes using a spatula and wax as in the case of Texturbase but the sheen level will be less.
Q. Can the cracking be automatic and no heat induced
A. Yes using Texturline Aquaglass size as a full coat under it or partially for defined areas.
Q. What coloring method are used in this system
A. Integral colour would be universal colors up to 5% by volume
Q. Can topically color be applied
A. There are two methods, staining or wash and glazing, the former using Texturline Stonewash pigment in
water the latter one of the Texturline glazing systems.
Q. What would be a typical use for this product?
A. Due to its versatility it can be used in a variety of applications from crafting to large wall installations in
commercial building. After Texturbase this is our second largest seller and can be found in craft stores for
DIY projects as well as in large pails for professional use.
37
BACK
Texturstone
This simple limestone coating is ready to use, roll on or trowel up stone effect, requires one coat to produce a
finished look. The qualities we were looking for is the coating‟s is the ability to absorb a glaze or stain, so
when wiped back a small percentage remains locked in the surface. Bonding to varied substrates is an important factor when finishing is externally; After the application of a glaze or stain the product is washable and
needs no other protection for both interior and exterior surfaces. It has its own high bond binder built into the
system, therefore reducing the risk of delaminating or weather driven chalking and flaking. Colouring the system is easy as it accepts all forms of water compatible tints and pigments as well as liquid acrylics and super
saturates, in fact anything containing enough colour to achieve the desired result. It can be rolled directly
from the can and texture can be modified by any method that will achieve a desired result. We recommend
the use of gloves as the material will de difficult to remove once dry on the skin. Splashes on adjacent surfaces should be removed before drying with a sponge or wet rag, .
Packaging: 6kg in a 3.78l can 24kg in a plastic pail supplied in high hide white base
Calce Veneziano
This plaster has the qualities of Texturbase with the added durability of slaked lime that also adds to the final
look and sheen. The name Venetian plaster or Stucco Antico are general terms applied to this finish, the real
difference is in the application which Veneziano excels by its ease of use. The general use is where a refined
softer look is requires or a high polished plaster is specified. The higher opacity of the final coating will reduce
the texture to soft velour with bleached overtones, though polishing will reduce that effect. When combined
with our burnishing flat wax it adds to the durability and washability. This product is for interior use only. It‟s a
good idea to lay down a scratch coat of Texturbase or Sharktooth primer to key in the texture onto surfaces
where adhesion may be a problem.
The burnishing wax was designed to be completely compatible with and accentuate the detail in the texture
as well as produce a high sheen that is washable.
Coloring can be done using universal colorants up to 5% by volume 5flozs by gallon (5kg)
Packaging is on European standard 25kg - 5kg - 1.25kg
Moiré
Texturline Designer Finishes Introduces Moiré, a new luxury coating that resembles oriental wild silk. An opulent wall finish that is very environmentally friendly, durable and washable, plus it is easy to apply in one coat
or two.
Application method is on a video that you can view by visiting www.texturline.com links
Paint base color with latex flat or eggshell in a shade matching the Moiré. Apply in an irregular trowel movement the Moiré. Allow 4 hours for the product to level and dry. Do not wash the surface for 7 days when it
will be at optimum curing and fully washable.
Volatile organic carbon content: 46g per litre. Consistency: inert paste in white pearl and soft gold.
Clean up: warm water. Dilution: not required ready for use. Coloration: universal tints at 5% volume (5floz per
gallon)
Application: usual method by plastering trowel or wide putty knife.
Sizes: 850g Qt can 3.4kg gal 13.6kg 14 litre pail. Fan deck 105 colors available $30.00
38
Texturtop
Texturtop is a complex system not easily understood so we present the product in stages according to finish
and type: The first hurdle to overcome is the word wax that defines these products; it is an acrylic wax not
unlike plastic tile sealer, therefore water based and not solvent. It is recoverable with other coatings including
paint where solvent wax cannot.
1. Flat wax
2. Burnishing wax
BACK
3. Satin wax
4. White wax.
5. Metallic wax
6. Iridescent wax
Flat wax: has a low or medium sheen when applied to stone finishes and can be burnished to a high sheen
over Texturbase or Veneziano as it penetrates and combines with the plaster to do this. The compatibility of
this wax when applied over lime-based products makes it one of the best water-based sealers on the market.
Satin wax is generally used over areas where high traffic is a concern or over patina metal or finishes where
you are unable to burnish. Where a high sheen is required it lays on the surface as semi gloss sheen.
Burnishing wax
This wax is based on paraffin wax emulsion with the addition of acrylic resin and can be used in exterior and
interior applications over Marmorino Classic, Carrara and Venetiano. It burnishing quality allows for very high
sheen levels and superior water resistance.
White wax is used to get a coloured effect such as in a Spatulato type finish allowing more definition as it is
more opaque when tinted. The method for tinting the colours is by adding universal colour creating a semi
opaque trowel up coating. It can be burnished to a high sheen saving both time and labour cost as it creates
a polychromatic look without having to apply a clear coat.
Metallic waxes in which we use micas to get the various colours. The difference between metallic and iridescent is the latter is transparent and when applied over dark colours irises „a show of colors of various hues,
like a rainbow.‟ Metallic effects are more opaque and are in the metallic hues we associate with gold and silver etc. These products are all very washable and durable and can be applied with a variety of tools.
Supplied ready to use in light paste easy to apply by sponge, spatulas and trowels
Packaging: 16oz or half a litre and 3.78L for premixed metals and iridescent.
0.946L for clear waxes – 3.78L – 15L.containers and has a shelf life of 3 years
Coverage averages 250 sq. ft per litre VOC 70g per litre
Fire rating is classified non-combustible and it does not contribute to smoke in case of a fire.
Clean up and dilution is with water. Dry material removal is by hot water or a light solution of menthol hydrate
and water always test for colourfastness of fabrics and carpets.
It will render washable all of the plaster products in our system.
General
When flat wax is used over Texturbase it will allow burnishing or polishing of these products by combining
with the base by soaking in and allowing this combination to reach very high sheen levels without looking like
plastic. The use of satin wax to attain similar end results with a more resistant surface is possible but tends to
be more like Formica in aspect and takes away a little from the traditional look. White wax is generally used
where an overlay of alternate colour or colours is required this we generally refer to as Spatulato. It can be
burnished and has a wax aspect that is waterproof when cured. Metallic waxes are in general used to simulate metal or patination on metals. Distressed finishes are particularly effective when Texturline stonewash
system is combined over metals and sealed.
.
As with most Texturline products‟ intermixed between systems is simple and increase the multitude of uses
that can be achieved.
39
Texturtop questions and answers
Q. Can I tint clear wax?
A. Yes but the effect would be softer tones rather like coloured varnish.
BACK
Q. What is the highest sheen clear wax?
A. Burnishing wax will give the highest sheen when burnished.
Q. Is wax washable?
A. Yes but the flat wax is less than the others
Q. Can I use the wax over glaze and latex?
A. Yes but like all waxes the application will or will not leave a movement depending on the tool used
Q. Can wax be diluted if so with what?
A. Water will dilute waxes to soften effects but you do lose some of the washability
Q. Can I add pearl mica powders or bronzing powder?
A. Yes and we do in metallic pastes using satin wax as a base but not bronzing powder as it oxidizes.
Q. Are they suitable for floors?
A. No we recommend floor varnish such as used on concrete or wood
Q. Can Metallic waxes be used on their own?
A. Yes
As a stand-alone system it can be used to texture over painted surfaces also as a stenciling medium for
raised effects. It is particularly effective under glass to simulate Eglomisé or abstract art. It will hold on fabric
as a decorative element as well as many other substrates. Diluted with Texturline extender it forms the basis
for a fast glazing system.
Zero Gloss Varnish is the established as a leader in its field in non reflective protection, based on a urethane
resin combined with acrylic, its non yellowing film with its ability to leave the decorative finish colour unaltered
is unique. It has a transparency that is unrivalled and if applied in thin coats will not leave lines when rolled. It
has been very successful for the film and television industries as it gives unrivaled clarity and low reflection
on camera.
For the artist the ability to control layers of colour is paramount, zero gloss meets these criteria.
Crackle size
One step crackle This all purpose medium that will crack paint on all surfaces. It is fast acting and will crack
practically any paint
Aquaglass A professional grade crackle medium that has a delayed reaction allowinh paint and plaster to be
cracked over large areas.
Versiplast by Briste group
This texturing plaster has become our most popular product on the US market. The coating is durable, sandable, and does not shrink or crack. There is no need to prime before application for this lightweight granular
plaster. It can be over-coated with glaze or Venetian plaster without being primed allowing a natural, earthy
appearance. This is a multipurpose interior texturing medium.
Trowel to a fine finish or to an intense heavy texture.
Avail, 1 Gal, 4 Gal.
40
Texturglaze Extender
We should have called it Super glaze; it‟s our best seller and has made Texturline the pioneer in North America in the race to see how long can water based glazes stay wet and workable on the wall.
It has a no haze flat aspect and will mix with any latex paint to produce a broken color texture with no lap
lines. The glaze is timed by the ratio of latex to glaze; an example is a 5 to 1 latex mix will stay workable for 2
hours or more. The more latex you add the shorter open time.
Tools for application can be sponges, rags, brushes and or specialty rollers.
BACK
The VOC level is high at 550g per liter
Sizes available are 0.946L, 3.78L & 15L
As EPA regulations go into effect in the US and environment Canada we will be phasing this item out and replacing it with new options at levels below 350g per liter as that figure drops over time.
Texturglaze Extender Regulated VOC alternative
We offer an alternative for those of you who live in areas where VOC levels are regulated (faux finishing products EPA standards 350g per liter) this glaze that has 230g per liter and a 1 hour open time. It offers the alternative to add UTC colorants instead of latex paint which helps the wet edge stay open longer
Sizes available are 3.78L & 15L
Texturglaze Basic Glaze
This is a satin sheen level and can be used with the addition of universal colorants and acrylic color. The wet
edge is 1 hour or more depending on the locality and relative ambient humidity. It is fully washable and recoatable after 16 hours and is ideal for graining and marbling. Its major selling point is price as its under
$45.00 a gallon retail.
Sizes available are 0.946L, 3.78L & 15L
Prime glaze
This is a thin glaze that is a fast dying system for spraying and rapid multi coating. A useful tool for theatre
and cinema set décor. It‟s priced competitively at around $35.00 a gallon retail available in gallons only.
Scumble Glaze
A water based glaze performing like oil. Texturline has formulated oil-based material into a water-based emulsion and in this scumble, evident to any ex oil paint user. It allows painters to use the same methods to create
wood grain and marble as they would in oil glaze. It can be tinted using universal colorants to any requirement and will add an indispensable tool to decorators.
VOC 550g per liter Sizes available are 0.946L, 3.78L & 15L
Metaltech metallic paint system
This product has been formulated to take advantage of the new technologies that have become available and
is now available in 3 bases that can be colored to any custom colour as well as 24 pre formulated ones.
The easy application is its strong point; it rolls on over white in two coats in practically all shades. It requires
no special rollers and can be used in the same way any latex paint is applied.
Available in Pearl/silver and gold base selling retail from $75.00 a gallon incl. tinting
Sizes: 0.875L US qt can and 3.4L US gal can
Calce Cielo limewash
Lime wash is a traditional paint for decoration of exterior and interior walls and ceilings. In its basic form it is
white but can be colored with earth or oxide pigments to give a wide range of natural tones. Lime wash is
moisture permeable and allows surfaces painted with it to 'breathe'. It is made from lime putty. Lime wash has
been used externally and internally for centuries all over the world. It is suitable over lime plaster or render,
earth walls, limestone, timber and most old lime wash. It is less effective on cement render, plasterboard or
acrylic latex, but is possible to apply, particularly if modified for better adhesion. Lime wash is not recommended for impervious materials (granite, hard brick, glossy paint etc). Sizes available 3.78L & 15L
Sundries:
Styrene white sampling boards 24” square
Available in packs of 8 at reasonable cost.
Sampling card in packs of twenty 20”x26”
41
The following formulas allow the user to achieve a color range based on the fan deck
sections labeled MUTED & CLEAN COLORS. The accent colors are not relevant to our products.
These colors are considered custom colors and need to be formulated using the book as a
guideline only.
There are rules that are essential to take into account when using Texturbase Neutral basecoat
As this is one base we have to adjust it first to produce at least 2 bases - this is done with the addition
of White tint - namely KX on the Color trend 888 system. The proportion to each base outlined in the
listing is set out in the diagrams below. Though the colors produced are very close to the fan deck it
is inconceivable that every one will be an exact match. If exact matching is required the addition of
a small proportion of the formula or part of it will rectify this discrepancy. Even with the best
intentions the fan deck is a printed reproduction of the intended colors with a latex paint
and not plaster.
We also would like to mention that CAROLINA SANDSTONE can also be tinted in the same way.
All other products we manufacture are notable to be accurately tinted in this way but can be custom
formulated and formulas retained for future reproduction
1-0101P
1-0103T
PASTEL BASE
TINT BASE
1.5kilo
6kilo
24 kilo
1.5kilo
6kilo
24 kilo
C -2
L -6
C -8
L -24
C -32
L - 2Y
C -10
L -30
C -40
L - 2Y24
C - 3Y 16
L -10Y
fig 1
fig 2
The title PASTEL BASE or any number ending in 'P' means the color has a high content of white pigment
these bases are used mainly for pastel colors (light shades)
fig 1
TINT BASE or numbers finishing with the letter 'T' for our needs will be treated in the same way as there is
not enough variation to change anything when using our formula proportions fig 2
In both cases add from the machine the proportional value of Y24 (Y being 48 on the scale or 1 oz. volume)
this is the measure to 1.5kg or a qt can (in the case of Carolina 1.375kg)
For the 6kg size the measure is 6Y KX - for the 24kg 24Y KX Carolina will be the same for 5.5Kg and 22 kg.
So to be clear we take the above formulas adding the KX proportionally in each case before adding the color
by dividing then divide the above numbers by 2. See fig. 3
1-0101P
PASTEL BASE
1.5kilo
6kilo
24 kilo
C -1
L -3
C -4
L -12
C -16
L - 1Y
fig 3
The Deeper colors labeled DEEP BASE or 'D' are treated slightly differently; in this case the proportion of KX is
reduced by 1/3 (white pigment) i.e..Texturbase neutral 1.5kg YKX - 6kg 4YKX - 24kg 16YKX.
1-0104D
DEEP BASE
1.5kilo
6kilo
24 kilo
C -10
L -30
C -40
L - 2Y24
C - 4Y 8
L -12Y24
fig 4
42
See fig. 4
MATERIAL SAFETY DATA SHEET
Material Name:
Classification:
TEXTURBASE RED, GREEN, BLUE, BLACK, NEUTRAL, WHITE
BACK
Not WHMIS CONTROLLED
WATERBASED PRODUCTS
Material Use:
Decorative Finishes Not SARA III: regulated
Page 1
43
BACK
Manufactured in Canada
335 Horner Ave Toronto M8W 1Z5
Page 2
44
Material Name:
Classification:
Texturtop Wax Clear / Metallic
BACK
WATERBASED PRODUCTS
Material Use:
45
BACK
Page 2
46
Material Name:
Classification:
BACK
Carolina Sandstone
WATERBASED PRODUCTS
Material Use:
47
BACK
48
Material Name:
Classification:
BACK
Moiré plaster
WATERBASED PRODUCTS
Material Use:
Moiré Plaster
49
BACK
50
Material Name:
Classification:
Glaze /Extender/ Scumble
WATERBASED PRODUCTS
Material Use:
VOC 200g per liter
Packaging
0.946L - 3.78L - 15L Plastic pails US
500ML - 2.5L - 5L Plastic containers EU
51
BACK
BACK
52
Material Name:
Classification:
BACK
Primers
WATERBASED PRODUCTS
Material Use:
/ Texprime
53
BACK
54
BACK
Material Name:
Classification:
Stonewash Pigment
WATERBASED PRODUCTS
Material Use:
55
BACK
56
Material Name:
Classification:
Aquaglass ~ One step crackle
WATERBASED PRODUCTS
Material Use:
Packaging
3.78 Liter cans
57
BACK
BACK
Substrate preparation, Use acrylic primer on bare surfaces followed by latex eggshell
in color that will appear in cracks.
58
Material Name:
Classification:
VENEZIANO
BACK
WATERBASED PRODUCTS
Material Use:
Ingredients:
Acrylic copolymer
emulsion
CAS, NA or UN number
Unknown
Surfactant
7732 - 18 - 5
Water
57 - 55 – 6
39445 – 23-3
Coalescing agents
Hydrated Lime
Kaolin
13463 – 67-7
1332 – 58 – 7
Calcium carbonate
Page 1
59
BACK
60
Material Name:
Classification:
Metaltech Metallic paint
WATERBASED PRODUCTS
Material Use:
Packaging: Cans 0.850L 3.84L
61
BACK
BACK
62
BACK
63
BACK
Material Safety Data Sheet
Product :
MARMORINO CARRARA
MARMORINO CLASSIC
MARMORINO COARSE
1. IDENTIFICATION of PRODUCT and company
PRODUCTS
Trading name
MARMORINO VENEZIANO CLASSIC
MARMORINO VENEZIANO CARRARA
MARMORINO VENEZIANO SALT AND PEPPER
MARMORINO COARSE
Type of product and use:
slaked lime putty-knife rendered wall coating
PRODUCER
Producer‟s data:
STUCCO ITALIANO Italy
web: www.stuccoitalianoinc.it
2. Composition: Hazardous substances in compliance with Directive 67/578/EEC as amended, or for which there are exposure limits:
§
Slaked lime - Calcium hydroxide 22 ÷ 27 %
- Xi Irritant
- R41 Risk of serious damage to eyes
- R36/38 Irritating to eyes and skin
3. identification of hazards No specific hazard exists in use.
If in contact with eyes, the product causes considerable irritation that can last for more than 24 hours.
It causes serious ocular damages, such as cornea mat and iridium injury.
64
BACK
4. first-aid measures
Contact with skinRemove contaminated garments. Rinse thoroughly with plenty of water and soap.
Contact with eyesRinse immediately with plenty of running water, with eyelids open, for at least 10
minutes. Seek medical advice if necessary. Do not use eye drops or any kind of lotion unless prescribed by a specialist.
Swallowing Seek medical advice.
5. fire-prevention measures
Water based non-flammable product.
6. MEASURES IN CASE OF ACCIDENTAL SPILLAGE
Individual precautions Wear protective garments, gloves and glasses.
Environmental precautionsLimit leaks with soil, sand and sawdust.Notify to the competent authorities if the product has run into a watercourse, into the drainage system or has contaminated the soil
or vegetation. Cleaning methods Collect as much product as possible, possibly absorb the residue
with inert material. Wash the area with water. Remove everything in compliance with the relevant
regulation.
7. HANDLING AND STORAGE
Handling precautions: Avoid contact. Do not eat or drink during handling. Incompatible materials
None in particular.
Storage condition : Keep the containers properly closed, in suitable space at a temperature between +5°C and +30°C.
8. INDIVIDUAL CONTROL
Precautionary measures Do not eat or drink during work, wash hands at every break and at end of
work.
Breathing protection No safety measures for normal use.
Protection of hands Protective gloves.
Protection of eyes Safety glasses.
Protection of skin No safety measures for normal use.
Exposure limits: No safety measures for normal use.
9. CHEMICAL/PHISICAL CHARACTERISTICS OF THE PRODUCT
Physical state Very dense paste.
Colour White.
Odour Weak.
pH value 12,5 ± 0,20.
Freezing point 0°C.
Boiling point 100°C / 212°F.
Flash point Non applicable - Non flammable.
Water solubility Dispersible.
Specific weight 1,56 ± 0,05 Kg/l at 20° C.
65
BACK
10. Stability and reactivity
Condition to be avoided None in particular. Stable in normal conditions.
Substances to be avoided None in particular.
Hazards from decomposition None.
11. toxicological information
Specific toxicological information not available.
Frequent and prolonged contact causes irritation of skin and eyes.
12. ecological information
Do not disperse the product in the environment.
Waste waters and residues do not have to be poured into drains, into the ground or in watercourses.
13. information on disposal
Disposal of product residues and waste deriving from its use as well as empty containers must be in
compliance with current regulations, as per Leg. Decree 22 dated 5/2/97.
14. Information on transport
By road non-hazardous material, non-flammable non-explosive, not subject to regulation (A.D.R.)
By rail non-hazardous material, non-flammable non-explosive, not subject to regulation (RID)
By sea non-hazardous material, non-flammable non-explosive, not subject to regulation (IMDG
Code)
By air non-hazardous material, non-flammable non-explosive, not subject to regulation (IATA)
15. Information on regulations
In conformity with the provisions of Leg. Decree 03/65 and Directive 99/45 EC the product is labelled as follows:
Xi Irritant R R36/38 Irritating to eyes and skin R41 Risk of serious damage to eyes S2 Keep out of
the reach of children S24/25 Avoid contact with skin and eyes S2 Iin case of contact with eyes, rinse
immediately with plenty of water and seek medical advice. Contains Calcium hydroxide 22 ÷ 27 %
Where applicable, refer to the following regulations: P.D. 303/56 Health controls Leg. Decree
626/94 Safety and health of workers
16. other information
Data supplied in conformity with:
Directive 99/45 EC as amended;
Directive 67/548 EEC as amended and updated;
Directive 91/155 CEE as amended and updated.
The information contained herein is based on our knowledge at the date given below, refers only to
the product indicated and does not represent a guarantee of particular qualities.
66
BACK
Product :
Material Safety Data Sheet
INTONACHINO Fine, Medium, Coarse
PRODUCTS
Trading name
Color
INTONACHINO FINE SIZE
white
INTONACHINE MEDIUM SIZE
white
INTONACHINO COURSE SIZE
white
slaked lime putty-knife rendered wall coating
PRODUCER
Producer‟s data:
STUCCO ITALIANO
Italy
www.stuccoitaliano.it
2. Composition
Hazardous substances in compliance with Directive 67/578/EEC as amended, or for which there are
exposure limits:
Slaked lime - Calcium hydroxide 14 ÷ 23 %
- Xi Irritant
- R41 Risk of serious damage to eyes
- R36/38 Irritating to eyes and skin
3. identification of hazards
No specific hazard exists in use.
If in contact with eyes, the product causes considerable irritation that can last for more than 24
hours.
Contact with skinRemove contaminated garments. Rinse thoroughly with plenty of water and soap.
Contact with eyes Rinse immediately with plenty of running water, with eyelids open, for at least 10
minutes. Seek medical advice if necessary. Do not use eye drops or any kind of lotion unless prescribed by a specialist. Swallowing Seek medical advice.
5.fire-prevention measures
Water based non-flammable product.
67
BACK
Individual precautionsWear protective garments, gloves and glasses.
Environmental precautions Limit leaks with soil, sand and sawdust.
Notify to the competent authorities if the product has run into a watercourse, into the
drainage system or has contaminated the soil or vegetation.
Cleaning methods
Collect as much product as possible, possibly absorb the residue with inert material.
Wash the area with water. Remove everything in compliance with the relevant regulation.
Handling precautions Avoid contact. Do not eat or drink during handling.
Incompatible materials None in particular.
Storage condition
Keep the containers properly closed, in suitable space at a temperature between +5°C
and +30°C.
Precautionary measures Do not eat or drink during work, wash hands at every break and at end of work.
Breathing protection No safety measures for normal use.
Protection of hands Protective gloves.
Protection of eyes Safety glasses.
Protection of skin No safety measures for normal use.
Exposure limits: No safety measures for normal use.
9. CHEMICAL/PHYSICAL CHARACTERISTICS OF THE PRODUCT
Physical state Very dense paste.
Colour White.
Odour Weak.
pH value 12,5 ± 0,20.
Freezing point 0°C.
Boiling point 100°C / 212°F.
Flash point Non applicable - Non flammable.
Water solubility Dispersible.
Specific weight 1,56 ± 0,05 Kg/l at 20° C.
10. STABILITY AND REACTIVITY
Condition to be avoided None in particular. Stable in normal conditions.
Frequent and prolonged contact causes irritation of skin and eyes.
Disposal of product residues and waste deriving from its use as well as empty containers must be in compliance with
current regulations, as per Leg. Decree 22 dated 5/2/97
68
BACK
14 Information on transport
By road non-hazardous material, non-flammable non-explosive, not subject to regulation (A.D.R.)
By rail non-hazardous material, non-flammable non-explosive, not subject to regulation (RID)
By sea non-hazardous material, non-flammable non-explosive, not subject to regulation (IMDG Code)
By air non-hazardous material, non-flammable non-explosive, not subject to regulation (IATA)
15. Information on regulations
Symbols XiIrritant
Phrases R
R36/38 Irritating to eyes and skin
R41 Risk of serious damage to eyes
Phrases S
S2 Keep out of the reach of children
S24/25 Avoid contact with skin and eyes
S2 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
Contains Calcium hydroxide 14 ÷ 23 %
Where applicable, refer to the following regulations:
P.D. 303/56 Health controls
Leg. Decree 626/94 Safety and health of workers
Directive 91/155 CEE as amended and updated.
The information contained herein is based on our knowledge at the date given below, refers only to the product indicated and does not represent a guarantee of particular qualities.
Key Legend Information/:
N/A Not Applicable
ND Not Determined
OSHA Occupational Safety and Health Administration
69
BACK
SAFETY DATA SHEET
Product :
TADELAKT
PRODUCTS
Trading name
Color
TADELAKT
white
Hydrate and hydraulic lime based wall coating
PRODUCER
Producer‟s data:
www.stuccoitaliano.it
STUCCO ITALIANO Italy
2. Composition
Lime (Hydrate lime and Hydraulic lime), Mg silicate and aluminate, Calcium Carbonate, Marble powder, Dolomite, Acrylic binder, Cellulose,
3. identification of hazards
No specific hazard exists in use and not chronic effects determined.
If in contact with eyes, the product causes considerable irritation that can last for more than 24
hours.
If breathed it causes considerable irritation to respiratory organs that can last for more than 24
hours.
If swallowed may cause gastrointestinal irritation.
Contact with skin: Remove contaminated garments. Rinse thoroughly with plenty of water and
soap.
Contact with eyes: Rinse immediately with plenty of running water, with eyelids open, for at least 10
minutes. Seek medical advice if necessary. Do not use eye drops or any kind of lotion unless prescribed by a specialist. Swallowing Seek: medical advice.
Inhalation: Move the person to fresh air. If breathing is difficult give oxygen or, in critical situations,
administer artificial respiration. Seek medical advice
70
BACK
5. fire-prevention measures
Non-flammable product.
Auto-ignition Temperature
NA
Flammability Limits (vol/vol%) Lower NA Upper NA
Appropriate extinguishing media must be used to surrounding fire.
Fire fighters have to use self-contained breathing apparatus.
High temperature and fire may cause production of toxic fumes.
Individual precautions:
Environmental precautions:
Cleaning methods:
Wear protective garments, gloves, glasses and dust mask.
Limit leaks with soil, sand and sawdust.
Notify to the competent authorities if the product has run into
a watercourse, into the drainage system or has contaminated
the soil or vegetation.
Collect as much product as possible, possibly absorb the residue with inert
material. Wash the area with water. Remove everything in compliance with the
relevant regulation.
Handling precautions :
Avoid contact. Do not eat or drink during handling. Use with
adequate ventilation
Incompatible materials:
Storage condition
None in particular.
Keep the containers properly closed, in suitable dry space at a temperature
between -15°C and +30°C.
Precautionary measures Do not eat or drink during work, wash hands at every break and at end of work. Use
with adequate ventilation. Breathing protectionUse a NIOSH/MSA approved respirator when using. OSHA
regulation in European standard EN149 or US stnd 29 CFR 1910.134
Protection of hands: Protective gloves. Protection of eyes: Safety glasses with side shields. Protection of skin : No safety measures for
normal use. Exposure limits: No safety measures for normal use.
9. CHEMICAL/PHISICAL CHARACTERISTICS OF THE PRODUCT
Physical state Powder.
Colour White. Odour Weak.
pH value 12,5 ± 0,20.
Freezing point 0°C. 32°F. after mixed with water. Boiling point 98°C / 208°F. after mixed with water.
Flash point Non applicable - Non flammable. Water solubility Dispersible. Insoluble.
Specific weight 1,20 ± 0,05 Kg/l at 20°C.
10. STABILITY AND REACTIVITY
Condition to be avoided
None in particular. Stable in normal conditions.
Frequent and prolonged contact causes irritation of skin, respiratory organs and eyes.
Carcinogenetic ND
Chronic Toxicity ND
71
BACK
Disposal of product residues and waste deriving from its use as well as empty containers must be in compliance with current regulations, ( EU: as per Leg. Decree 22 dated 5/2/97).
14. Information on transport
By road: non-hazardous material, non-flammable non-explosive, not subject rregulation (A.D.R.)
By rail: non-hazardous material, non-flammable non-explosive, not subject to regulation (RID)
By sea: non-hazardous material, non-flammable non-explosive, not subject to regulation (IMDG Code)
By air: non-hazardous material, non-flammable non-explosive, not subject to regulation (IATA)
For US Department of Transportation:
Proper shipping name : none
Hazard Class : none
ID Number : none
Packaging Group : none
15. Information regulations
Symbols: Xi Irritant Phrases R: R36/38 Irritating to eyes, skin and respiratory organs. R41 Risk of serious
damage to eyes Phrases S : S2 Keep out of the reach of children S24/25 Avoid contact with skin, breathing organs and eyes S2 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice
Where applicable, refer to the following regulations:
P.D. 303/56 Health controls Leg. Decree 626/94 Safety and health of workers
For US: No reactive Hazard, No Acute Health Hazard, No Chronic Health Hazard
SARA : None
TSCA: The components are listed on the TSCA inventory
Directive 91/155 CEE as amended and updated. The information contained herein is based on our knowledge at the
date given below, refers only to the product indicated and does not represent a guarantee of particular qualities.
The user has to make sure of the suitability and completeness of such information in relation with the specific use and
always under his responsibility act in accordance with the regulation on health, safety and environmental protection, provided by current laws.
The manufacturer declines all liability for improper use.
This card cancels and replaces all previous editions.
Key Legend Information/:
N/A Not Applicable
ND Not Determined
OSHA Occupational Safety and Health Administration
72

read more - Plaster Center

Transcription

Similar documents

TEA STAINED STAINLESS STEEL?

FASHION THAT HAS GONE TO THE DOGS! www.pinkwhiskers.co.uk

to view AMP design guidebook

weather-tite - Sparcolux Paints

Corever - Permatone

How I Finish My Models

TODAY!

How to Create a Venetian Plaster Finish

Off Duty section of the Wall Street Journal