HSM pdf

APPLICATION REFERENCE
Channel Baling Press
Best of the month: OCTOBER 2010
Channel Baling Press solutions
DESCRIPTION OF APPLICATION
HSM GmbH + Co. KG, a German manufacturer of document shredders, cutting
machines, baling presses and PET solutions developped their fully automatic channel baling press HSM VK 8818 R, to enhance their Environmental Engineering
product range.
This baling press is suitable for professional disposal management and for major
industrial applications, such as the processing industry, waste disposal companies,
PET/bottle disposal, department stores and the printing and paper industry.
With an extremely high pressing force of 1100 kN and a large filling hatch of approx. 1000 x 1800 mm, this HSM baling press is suitable for a wide variety of materials, such as cardboard, paper and foils.
This all-rounder is also easily able to deal with bulky material, DSD products, sorted waste material and substitute fuels.
Depending on the material, bales can weigh up to 700 kg at 1200 mm length,
and reach dimensions of approximately 1100 x 750 x 600–1200 mm; they are held
together by fully automatic wire strapping, even if the materials are very expansive.
The optimised bale dimensions and bale weights ensure efficient truck loading.
for internal use only
Channel Baling Press
APPLICATION REFERENCE
THE GOAL: REDUCTION
OF ENERGY CONSUMPTION
HSM puts very much effort in the reduction of the
energy consumption of their machines.
The testing machine (an horizontal baling press)
was equipped with two 75kW motors which drive two hydraulic
pumps. For testing purposes,
full load was simulated by a
(150kW) counterpress.
These machines are developed to deliver a 24 hour
job. The cyclic process
(shearing, compression
and withdrawal) only
takes about 20 seconds.
The estimated energy consumption is up to 500 MWh per year
(equals about 50 k€ per year !).
BONFIGLIOLI SOLUTION
Communication
module
Inverters of the Series ACU imply the field oriented algorithms. These algorithms are very
efficient and react fast to changing load conditions.
With our inverters the “part load” efficiency of the system is close to the “nominal” efficiency. This was proven on very extensive measurements of currents, torques, power, flow
and pressure.
The overall reduction of the energy consumption exceeded all expectations. Under full load
up to 40%. Under the above mentioned operating hours the end-user can save up to 20 k€
per year. Additional benefits
are noise reduction under
partload-conditions and
less cooling units for
the hydraulic fluid.
An amortization
within one year is
possible.
The Bonfiglioli
Active Cube series
Bonfiglioli products
Description
Line choke
ACU401_43A Inverter 3x 400V 75 kW 125 A - LCVT 160 Line choke 160A
Hydraulic pump 1 CM PDP V1 Communication module PDP V1
ACU401_43A Inverter 3x 400V 75 kW 125 A - LCVT 160 Line choke 160A
Hydraulic pump 2 CM PDP V1 Communication module PDP V1
Ventilator
for internal use only
ACU401_07FA Inverter 3x 400V 0.75 kW 2.4 A
CM PDP V1 Communication module PDP V1
author:
Michael Endemann: [email protected]
Bonfiglioli Deutschland GmbH