50-Tonne ADT
Transcription
50-Tonne ADT
CONSTRUCTION/FORESTRY 2013 VOLUME 2 50-Tonne ADT HAVE YOU SEEN ME BEFORE? Probably not Wajax Equipment is proud to introduce the Bell B50 Articulated Dump Truck With its 50-tonne rated payload, it’s the world’s largest ADT. Currently representing the 35-50 tonne range of ADT’s, we will be expanding to the full range of 20-50 tonne ADT’s in January, 2014. With a large inventory of Bell ADT parts, we have your stock readily available, at a more competitive price than the competition. All of our regions have had Bell technical training, contact your local branch to find out how we can service your Articulated Dump Truck today. Genelle, BC (W Kootenays) (250) 693-5530 Grande Prairie, AB (780) 567-4266 Windsor, ON (519) 944-8118 Kamloops, BC (250) 374-5055 Fort MacKay, AB (780) 743-1996 Chambly, QC (450) 447-9891 Langley, BC (604) 513-2216 Saskatoon, SK (306) 934-2858 Laval, QC (450) 682 3737 Nanaimo, BC (250) 755-2005 Winnipeg, MB (204) 255-2214 Quebec City, QC (418) 681-3555 Prince George, BC (250) 562-7321 Hamilton, ON (905) 383-3654 St. Félicien, QC (418) 679-4623 Sparwood, BC (250) 425-9900 Kitchener, ON (519) 893-2942 Moncton, NB (506) 857-8870 Tumbler Ridge, BC (250) 242-5946 London, ON (519) 685-1172 Dartmouth, NS (902) 468-7352 Calgary, AB (403) 279-7278 Mississauga, ON (905) 624-5611 Corner Brook, NL (709) 686-0777 Blackfalds, AB (Red Deer) (403) 885 5604 Ottawa, ON (613) 739-2990 Wabush, NL (709) 282-3626 Edmonton, AB (780) 483-6641 Sudbury, ON (705) 692-3656 Mount Pearl, NL (709) 747-7223 Edmonton, AB (Mining) (780) 948 5400 Thunder Bay, ON (807) 577-1111 Ft McMurray, AB (780) 791-6447 Timmins, ON (705) 267-7000 Canadian Publications Mail Agreement No. 40110344 Return undeliverable Canadian addresses to: Wajax Head Office #30, 26313 TWP 531A Acheson, Alberta T7X-5A3 Special Offers Expire December 31, 2013 Part numbers and images shown are for reference only. Wajax makes no claim that these parts are from the manufacturer stated. All parts, pricing and specials are subject to inventory and branch availability. Not all products depicted within are available in all provinces, please contact your local branch to find out. CONSTRUCTION/FORESTRY WAJAX AFTERMARKET UNDERCARRIAGE Special low price undercarriage options on major brands! Wajax Equipment has long been synonymous with quality undercarriage for Hitachi and JCB models. However, did you know that Wajax Equipment is also a supplier for competitive make undercarriage? Caterpillar 320BL WORK LIGHTING EXCAVATOR BATTERIES compatible undercarriage package consists of: (2) link assemblies, (16) lower rollers, (4) carrier rollers, (2) idler groups, (2) sprockets all complete with mounting hardware. V320BL-WAJAX $6,795.00 SUPPORT FOR MAJOR BRANDS! Hitachi Models BY N120 $236.42 LOW PRICING! 12-24 Volt 70 Watt flood lamp M8 307001-4 $17.99 TRACK SHOVEL NEW! D-handle BDDS14 $14.99 12-24 Volt 45 Watt LED lamp High impact plastic lens cover M8 HYS815 $178.92 Bobcat T190 compatible undercarriage package consists of: (2) rubber tracks, (8) lower rollers, (2) front idlers, (2) rear idlers (2) sprockets - mounting hardware not included. VT190-WAJAX $3,995.00 BLOW OUT PARTS While quantities last and for a limited time only! Part Number 3804745RX 7240112 3803256 531-5069 UP 749 F043754 560-00981R 377750 Description Turbo, HX82 Boom adaptor Turbocharger Cylinder Cylinder Solenoid Pump Bit, KENCAST, 3x3 Notes Cummins QSK19 Timberjack 608 Cummins QSL9 Hiab out rigger cylinder PK2100 extension cylinder Waratah 758 or 762 Barko 275BTM swing pump QTY 2 1 1 1 1 3 1 310 Special Price Each $225.00 $365.00 $298.00 $230.00 $210.00 $75.00 $185.00 $15.00 331/16011 Track - rubber JCB 08014 - 08018 Micro Plus 3 $42.00 2 WAJAX UNDERCARRIAGE PACKAGES ARE FOR MORE THAN JUST HITACHI! Individual components are available, contact your local Wajax Equipment branch for additional details and take advantage soon of these special undercarriage prices! Wajax Equipment is not an authorized Caterpillar nor Bobcat dealer. Wajax Equipment makes no claim or representation of selling Caterpillar or Bobcat products, only offering supporting aftermarket parts and service to these manufacturers. 2013 VOLUME 2 MONITOR AND MANAGE YOUR JCB MACHINES REMOTELY JCB is proud to partner with LiveLink, a software program that enables JCB owners to monitor and manage their machines remotely. LiveLink offers machine and fleet owners the following features: Machine security • Receive email alerts when a machine has left or entered a landmark • Know where your machines are located at any time • Receive text and email alerts when a machine is moving outside of operating hours Machine health and maintenance • Know when machines need routine servicing • Know when machines need technical support Machine reporting system • LiveLink comes with a range of seven fully customizable reports • Service and maintenance reports • Usage and productivity reports • Can be automatically emailed to you or any user at an interval that suits you For questions or assistance please contact Jaden Payne (912) 447-2223 or [email protected] The chart below details which LiveLink features are available on individual JCB machine ranges. LiveLink capability: Machine Range JS Machines Large WLS Fastrac TM320 Mid-range Loadalls* Other Machines** Location and mapping Landmark alerts Curfew alerts Back up battery Tow away wake up ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Machine hours Working time Machine reports Fleet reports ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Service notifications Service history Service fluid levels Machine cautions Event history ü ü ü ü ü ü ü ü ü ü ü ü § ü ü ü ü § ü ü ü ü § ü ü ü ü § § § Fuel level Idle time reports*** Engine load*** Fuel consumption*** Duty cycle reporting*** ü ü ü ü ü ü ü ü ü § ü ü ü ü § ü ü ü ü § ü ü ü § § § § § § § *Except P90 Loadalls **Can be installed with LiveLink Lite as an aftermarket fitment ***Capability shown is for machines with electronic engine management system ****As of January 2013, subject to change with region CD RECEIVER WITH USB CONTROL iPod®/iPhone® and Pandora® Ready Pioneer DEH-2500UI • Connect and play music from your iPod/iPhone • Pandora ready for iPhone • 1 RCA preout (2V) (M8) DEH-2500UI $125.01 GREAT PRICE! THE RE-DESIGNED RHINO SPRING CLIP AND RHINO RING Our new re-designed Rhino Spring Clip and Rhino Ring improve rotation, reduce cutter bit wear and make installation easier – all resulting in more savings for you. The Rhino Spring Clip has a rounder shape, bi-directional retaining tabs, reduced gap size and is made from thicker material. The Rhino Ring IN has a larger outside STOCK diameter, smaller and inside diameter and AVAILABLE! larger cone size. 2013 VOLUME 2 Contact your local Ontario Wajax branch for more information on our cold milling and pulveriser bits. Thunder Bay: 807 577 1111 Sudbury: 705 692 3656 Timmins: 705 267 7000 Windsor: 519 944 8118 London: 519 685 1172 Kitchener 519 893 2942 Hamilton: 905 383 3654 Mississauga: 905 624 5611 Ottawa: 613 739 2990 Wirtgen product line carried in the province of Ontario only 3 CONSTRUCTION/FORESTRY WAJAX EVENTS REPORT Join Wajax Equipment at our upcoming events: WAJAX EQUIPMENT – TALENT ACQUISITION LIFT UP YOUR CAREER… JOIN WAJAX! It’s been an exciting year for us building and developing tools for talent acquisition, employee engagement and retention in our business. Our programs continue to evolve and as a result continue to “lift up” careers for our employees. Oil Sands Trade Show & Conference September 10-11, 2013 Fort McMurray, Alberta Suncor Community Leisure Centre Some common questions about the job market… Demo International September 20-22, 2013 Saint Raymond, Quebec Located on the property of La Seigneurie de Perthuis – just 75 KM from Quebec City WAJAX ATTENDANCE REPORT Interior Logging Association (ILA): April 25-27, 2013 Vernon Curling & Athletic Club Vernon, British Columbia Wajax Equipment was proud to take part in the 55th Annual ILA Conference and Trade Show in 2013, where the theme for the year was “Out Training… Increasing the Workforce.” The event was a terrific event for Wajax to get together with our customers – as well as provide them with our Wajax & Hitachi Q: What is the biggest challenge as it relates to Talent acquisition in Canada? A: Talent shortage, pure and simple… Wajax is not adopting a program of “wait and see”… rather a program of proactive talent scouting. We are confident that our ongoing program development will continue to secure the talent we need to continue growing as an organization that invests in the future. Q: What is the best tool for acquiring talent? A: Our people, without a doubt are going to be the best recruitment tools for Wajax, be it ambassadors for our company culture, or actively engaging in conversations about career opportunities within or organization. “Choose a job you love and you will never have to work a day in your life.” -Confucius LOVE YOUR JOB! We can all make our individual work-life a little better for ourselves and the people around us. That breeds a culture of success and desire to perform, which is what Wajax is all about. Our Talent Acquisition team is always open to new and innovative ideas. Please feel free to send us your suggestion by emailing me – Steven Davidson at at [email protected]. Please title your email ‘recruitment ideas’, as all answers will be added to a draw for an OGIO Wajax travel suitcase. Northern Mines Expo golf cap, with a complimentary toupee! But it also provided us with an opportunity to showcase current and future openings to those seeking a position in the industry. Make sure you visit us in 2014! Canadian Institute of Mining, Metallurgy and Petroleum (CIM): May 5-7, 2013 Metro Toronto Convention Centre Toronto, Ontario The CIM celebrated its 30th anniversary this year – with Wajax Equipment having as big a presence as ever. In case you have not heard of the CIM Exhibition – it’s Canada’s premier mining show, featuring the latest in mining equipment, tools, technologies and services. This year, there were over 425 exhibiting companies greeting a whopping 6000 visitors over a three day period. Make sure you get your tickets early for 4 Three Divisions – One Industry Leader the 2014 CIM in Vancouver, this year was a fast sell out! May 29-30, 2013 Timmins Arena & Pavillion Timmins, Ontario Wajax Equipment participated in our 2nd Northern Mines Expo in Timmins, Ontario – this is Central Canada’s “Mining & Exploration Showcase.” Leading the world in mining and exploration this event brought together organizations and people representing all components of the mining and mineral exploration industry. This year was a little different however, we teamed up with our two sister divisions, Wajax Power Systems, and Wajax Industrial Components, to demonstrate what we can do for the mining industry TOGETHER. We look forward to taking part in our 3rd show in 2014! 2013 VOLUME 2