Aria Versadisc™ Bath/Shower Diverter Mixer

Aria
Versadisc ™
Bath/Shower Diverter Mixer
AVDSMC
Versadisc Bath/Shower
Diverter Mixer
Shower Port
Bath Port
Flow Rates at 40°C
(using 15°C cold and 55°C hot water)
HOT
COLD
Flow
(litres/
minute)
36
500
8.5
36
500
8.0
36
300
7.5
36
300
7.5
70
500
11.0
70
500
10.5
70
300
10.0
70
300
10.0
Pressure (kPa)
Includes 2 interchangeable subcartridges
for optimal flow and temperature control on
any pressure situation. Filters are housed
in subcartridges for easy cleaning without
having to remove faceplate or wall lining.
HOT
COLD
Flow
(litres/
minute)
Pressure (kPa)
Dezincification (corrosion) resistant DR
brass body.
15mm
½” BSP
Quality German headworks
for superior performance
and durability.
Proprietary Felton F5
cartridge, designed for all
pressures situations.
Anti-scald ring for limiting
hot water temperature.
20mm
¾” BSP
Water saving flow limiter
for setting maximum flow.
Phone 0800 743 358 www.felton.co.nz For equal low or equal high
pressures, install Versadisc™ as is,
with the green subcartridge. For
unequal pressures, simply remove
the green subcartridge and clip on
the white subcartridge provided in
the pack.
Fax 0800 329 335
Aria
Versadisc ™ Bath/Shower Diverter Mixer
FEATURES AND BENEFITS
FOR EQUAL
LOW/EQUAL HIGH (MAINS)
PRESSURES SITUATION
ATTACH
green
subcartridge
FOR UNEQUAL
PRESSURES SITUATION
ATTACH
white
subcartridge
All Pressures
Full front of wall access
The Diverter adapts to different pressure
situations with the two interchangeable
sub cartridges supplied, white for unequal
pressures and green for equal low or equal
high (mains) pressures.
If you’re planning to upgrade your hot
water cylinder from low to high (mains)
pressure within the next few years. Leave
the wall lining in place and save time and
cost as the diverter can be upgraded all
without removing the faceplate.
15mm
½” BSP
Included in
Versadisc
& Fusion
™
™
Nog
Wa
ll Lin
ing
F5 Ceramic Disc Cartridge
m - MAX
MIN 55m
20mm
¾” BSP
1500kPa Cartridge
20mm Outlet to
Bath spout
Maximising flow allowing
for a faster filling time.
Phone 0800 743 358 Enabling the mixer to be
line tested while installed
eliminating the need to
plug off the mixer to test
the pipe work for leaks
saving the installer time
and money. Anti-scald ring
and flow limiting screw for
safety and energy savings.
www.felton.co.nz Fax 0800 329 335
85mm
Mounting depth from face of wall:
Mounting depth
Minimum of 55mm to
a maximum of 85mm
making the diverter
adaptable to suit deep
walls and/or extra thick
wall lining applications.