January`s Online Superstore

Why not visit AOG
Australasian Oil & Gas Conference and Expo —17 to 20 February 2009 in Perth.
AOG is the largest Oil & Gas Expo of 2009
WOMA (Stand Q26)
WOMA is proud to offer you both Zone 1 and Zone 2 applications from Electric and
Diesel Combustion UHP Hydroblasting, Maintenance and Oilwell Intervention Units
to ATEX approved DIGIWELL Down-Well CCTV systems.
SEE YOU THERE!
What’s new through WOMA ?
This is simply the best tool to clean large, vertical tube bundles.
Combined with the Banshee Rotary Blast
Nozzle, nothing else can compete!
Compared to hand lancing it is much
easier, faster, safer and does a better cleaning
job.
•Easier – Operator controls the powered hose
reel which does all the physical work
•Faster – One man can clean two tubes faster
than two men working manually.
•Safer – Eliminates tangle of hose and back
breaking work of hose lifting and twisting.
•Better – Allows for high-pressure cleaning
both going down and back up.
For more information, please contact your
nearest WOMA representative.
•
WOMA Designed HYDROMATIC 2008 Remote Controlled specifically for use in the Alumina production
and related mining and refining industries.
•
Main Drive— 4 cylinder Tier 2 Low Emission (Gas Purifier less than 2 Bosch) Industrial Open Power Unit allows ‘walking’ speed (6kph) travel within tanks and
around refinery and mine sites.
•
Twinned with a WOMA (or other) HP or UHP Triplex
Pump Unit it will withstand reaction forces of 2500 N
therefore facilitating large volume de-scale operations.
•
Robust— Electrics (IP 65), Hydraulics, Slew and
Tracks — this units
predecessors have proved its hybrid.
Introducing the Stoneage
Dual Hose Sabertooth
for vertical heat
exchanger cleaning!
w w w . w o m a . c o m . a u • [email protected]
What’s new through WOMA ?
FOOT VALVE FV3000-VDF
Operating
Pressure MAX
Flow
capacity
Medium
Temperature
Weight
Length
Height
Width
Part #
3000 bar
45L/min
+100 C
11KG
500 mm
200 mm
185 mm
001.1917
Rugged and reliable high-pressure bypass foot valve to close/open a pressure water line by means of a mechanical valve.
Actuation via foot pedal with mechanical safety latch. The safety latch opens at actuation and independently returns back to
the normal position.
In not actuating pedal position, the flow medium will be led through the bypass line and the high-pressure unit becomes pressureless.
All parts coming in contact with the pumped media are of rust and acid resistant stainless steel.
Special characteristics:
Thread Data:
•
•
•
•
Connection (P):
Connection (A):
Connection (R):
•
•
•
•
•
•
Applicable for a variety of applications
Compact and rugged due to solid construction
High safety standard
Female thread 1 1/8-12UNF
Female thread 1 1/8-12UNF
Male thread G3/4 60° DK
Large protection cover and mechanical safety latch
protects against unintended actuation
Large area cherquered pedal for safe actuation
Low actuating force due to forward feed control
Large nominal flow rate
Turntable pressure housing and bypass connection
WOMA
Suitable for using seawater and de-mineralised water
All functional parts are protected from dirt and water
Water as a tool
w w w . w o m a . c o m . a u • [email protected]
HP Pumps
For Sale &
Hire / Buy Options
WOMA designs, manufactures and markets high-pressure plunger pumps. All
pumps can be driven either by combustion engines or electric motors. They are
suitable for stationary applications as well as for on-site applications
WOMA TRAILER MOUNTED 55M UHP PUMP
Applications:
An outstanding all-purpose ultra-high unit offering flexibility and durability. For the larger contractor, this utility is an excellent addition to your fleet for one-off contracting works and routine industrial services maintenance contracts. For the growing contractor, the unit has a relatively low price
entry point whilst offering versatility of application.
Features:
With 11.2 l/m @ 2500Bar you can complete a range of activities from general wash-down, surface
preparation, coatings and linings removal and blast-pad works using the WOMA Roto-Jet 2000
with TD Head. From cold steel and concrete cutting, pin-jet and pipe-cleaning work—you can do it
all.
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P12
1800
11.2
2500
Wet Dump
WOMA SKID MOUNTED 55M UHP PUMP
Applications:
An outstanding all-purpose ultra-high unit offering flexibility and durability. For the larger contractor, this utility is an excellent addition to your fleet for one-off contracting works and routine
industrial services maintenance contracts. For the growing contractor, the unit has a relatively
low price entry point whilst offering versatility of application.
Features:
With 11.2 l/m @ 2500Bar you can complete a range of activities from general wash-down,
surface preparation, coatings and linings removal and blast-pad works using the WOMA RotoJet 2000 with TD Head. From cold steel and concrete cutting, pin-jet and pipe-cleaning work—
you can do it all.
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P12
1800
11.2
2500
Wet Dump
WOMA TRAILER MOUNTED 150M UHP
Applications:
Another outstanding all-purpose ultra-high unit offering increased flexibility and durability. This
unit will fare well in any fleet— ideal for one-off contracting works and routine industrial services maintenance contracts. For the growing contractor, the unit has a reliable John Deere
Engine and relatively low price entry point whilst offering versatility of application.
Features:
With 18.7l/m @ 2500Bar you can complete a wide range of activities from general wash-down,
surface preparation, coatings and linings removal and blast-pad works using the WOMA RotoJet 3000 with TD Head. From cold steel and concrete cutting, pin-jet and pipe-cleaning work—
you can do it all. Sliding doors and easy service and maintenance access.
Plunger
P16
RPM
Flow
(l/min)
1800
18.7
Pressure
(Bar)
Delivery
2500
Wet dump or
Pneumatic
HP Pumps
For Sale &
Hire / Buy Options
WOMA TWIN 185M UHP PUMP
Applications:
A serious contender for your Ultra-High fleet, the skid-mounted WOMA
Twin 185M maximizes operational efficiency allowing you to temporarily place this in a flatbed truck/trailer or permanently fix it to a fleet vehicle. PLC Controlled to minimise operator
error, this unit enables use by anything from 1 to 4 operators on gun-work.
Features:
With a pneumatically controlled Check Valve and comfortably providing 49 l/m @ 2500Bar,
this reliable work-horse will enable you to complete wash-down works, surface preparation,
coatings and linings removal, pipe cleaning, cold steel and concrete cutting and a host of
other general applications.
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P16
1800
42
2500
Dry Shut
WOMA 250Z HP PUMP
Applications:
If punch and pressure is what you are after, the skid-mounted WOMA 250Z is a versatile
mid-range unit for a range of industrial uses in the mining and refining market sectors.
Mounted to a truck or trailer and powered by a reliable CAT, this unit will purr at 1800rpm.
Features:
Producing 78 l/m @ 1000Bar, we see you applying this to general wash-down works,
small and large diameter pipe cleaning, tank and vessel cleaning,
concrete demolition, and a host of gun-work. Go get ‘em!
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P30
1800
99.00
1000
Dry Shut
WOMA TRAILER MOUNTED MK3 250M
Applications:
Another great asset to your Ultra-High fleet the trailer-mounted WOMA MK3
Single 250M maximizes operational efficiency allowing you to tow this behind a Nissan
patrol or Toyota land cruiser sized vehicle with comfort. PLC Controlled to minimise operator error, this unit enables use by anything from 1 to 2 operators on gun-work.
Features:
With an electronically controlled Check Valve and comfortably providing 20 l/m @ 2800Bar,
this reliable work-horse will enable you to complete wash-down works, surface preparation,
coatings and linings removal, pipe cleaning, cold steel and concrete cutting and a host of
other general applications. This unit is fast gaining a great reputation in Europe and in
Australia.
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P16
1800
20.00
2800
Dry Shut
P18
1800
26.00
2500
Dry Shut
w w w . w o m a . c o m . a u • [email protected]
HP Pumps
WOMA 6001 HP
For Sale &
Hire / Buy Options
PUMP
Applications:
The WOMA 6001 is a ’flagship’ pump that was the foundation behind numerous successful industrial services companies. Reliable, robust and user-friendly, this high
volume unit is a stalwart. Building on the excellent WOMA reputation for dependability,
this unit can be can be single mounted to which-ever brand of diesel drive you request.
Features:
Powered by a continuous ‘A’; Rated Cat 3412, the 6001 will produce 240 l/m @ 900Bar
on a P40 plunger arrangement. Capable of concrete demolition, major descale, washdown, drain, large bore pipe, tank, vessel and general refinery services, this will be a
great asset.
Concrete? Like butter!
WOMA 6001
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P40
2100
240.00
930
Dry Shut
HP PUMP
Applications:
The WOMA 6001 is a ’flagship’ pump that was the foundation behind numerous successful industrial services companies. Reliable, robust and user-friendly, this high
volume unit is a stalwart. Building on the excellent WOMA reputation for dependability,
this unit can be can be single mounted to which-ever brand of diesel drive you request.
Features:
Powered by a continuous ‘A’; Rated Cat 3412, the 6001 will produce 240 l/m @ 900Bar
on a P40 plunger arrangement. Capable of concrete demolition, major descale, washdown, drain, large bore pipe, tank, vessel and general refinery services, this will be a
great asset.
Concrete? Like butter!
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P40
2100
240.00
930
Dry Shut
WOMA 1502 HP PUMP - as new 2nd
Applications: A
flag-ship WOMA unit, the renowned WOMA 1502 has been around - it
even pre-dates the Cold War. Many
manufacturing, fabrication and primary industries process plants have
successfully used this ‘work-horse’ unit in their operations for
Its renown reliability, consistency and performance.
Features:
Providing 99 l/m @ 565 Bar with a P30 plunger assembly, this unit will
achieve a wide tasking from plant and screen
wash-down, drain, tank and pipe cleaning to concrete and scale spalling. In
short, the WOMA 1502 will not beat you in to retirement.
Kilo Watt
110
Voltage
415
Amps
176
Hertz
IP Rating
50
55
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P30
1500
99.00
565
Dry Shut
w w w . w o m a . c o m . a u • [email protected]
HP Pumps
For Sale &
Hire / Buy Options
WOMA TWIN 1502 HP PUMP - as new 2nd
Applications:
Similar to the Single unit, the Twin WOMA 1502 simply provides you with double the hitting power, double the versatility and double the production. If you
have a large process or manufacturing plant, then this unit is for you.
Features: Each pump provides 99 l/m @ 565 Bar on a P30 plunger assembly.
This unit will achieve a wide tasking from plant and screen wash-down, drain,
tank and pipe cleaning to concrete and scale spalling. This offer provides a
never to be repeated opportunity to obtain a valuable asset at half the normal
retail price! In these tight financial times, that makes sense!
Kilo Watt
220
Voltage
415
Amps
364
Hertz
IP Rating
Plunger
RPM
50
65
P30
1500
Flow
(l/min)
Pressure
(Bar)
Delivery
565
Dry Shut
198.00
WOMA 1502 HP PUMP
Applications:
A flag-ship unit, the renowned WOMA 1502 has been around - it even
pre-dates the Cold War. Many a successful contractor has used this unit to
’get-going’ and most retain this work-horse unit in their fleet for reliability and consistency.
Features:
Providing 72 l/m @ 750Bar on a P26 plunger assembly, this unit will achieve a wide tasking
from drain, tank and pipe cleaning to concrete spalling, In short, the WOMA 1502 will not
beat you in to retirement.
Plunger
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
P26
1800
72.00
750
Dry Shut
HP Pumps — Blaster Sets
For Sale
DHD40035 & DHD50027
Pump
RPM
Flow
(l/min)
Pressure
(Bar)
Delivery
DHD40035
1450
35.00
400
Dry Shut Off
DHD50027
1450
27.00
500
Dry Shut Off
Specification:
5 piston pump for smooth operation
Brass head on dhd40035 & stainless steel head on dhd50027, ceramic
pistons, stainless steel valves – direct drive @ 1450 rpm
•
•
•
•
•
•
•
•
•
•
Stainless steel unloader valve
Safety valve
Pressure gauge
John Deere 4 cylinder water cooled diesel engine
running @ only 1450 rpm for lower noise emission
& low fuel consumption, producing: 40 kw @ 1450 rpm continuously
Twin disc PTO clutch
Murphy engine control system complete with:
Tachometer / hours run meter, high water temperature shutdown, low oil pressure shutdown, voltmeter enclosed in a
weather proof control box
Emergency stop button fitted to machine
•
•
•
•
•
•
•
•
Applications:
Woma’s NEW Small to Medium General Purpose Blasters are proving to
be real winners,.
They are can be used on a variety of applications and projects such as
General Maintenance Contracts and Pipe Cleaning etc
With economically priced attachments & low running costs the return on
your investment will be high.
Features:
Providing a choice of either 35 l/m @ 400 Bar or 27 l/m @ 500 bar, this
unit will achieve a wide range of tasks that do not require UHP at an extremely affordable price.
Battery & cables
Integrated 80 litre diesel fuel tank in base frame
200 litre stainless steel water tank complete with:
Incoming float control, bypass return line, low water level shutdown
50 mesh water suction filter
Channel section base plate / frame – powder coated
20 metre i.d. 10mm 600 bar rated hp hose complete with
Test certificates
500 bar gun complete with 800mm barrel
1 x 15° fan jet nozzle
1 x 0° Pencil jet nozzle
1 x Rotary Head
Dimensions:
2050mm long x 1000mm wide x 1130mm high
Dry weight: 980 kg
Fenner style rubber coupling
Coupling guard
w w w . w o m a . c o m . a u • [email protected]
COATING SOLUTIONS
1
Setting a new standard for performance in High Pressure
Spraying
Graco Xtreme NXT high-pressure air-operated airless sprayers provide longlasting durability that boosts your productivity.Designed with Graco’s new NXT Air
Motor, the Xtreme NXT is proven to outperform and outlast all other sprayers in its
class. It easily handles the toughest protective coatings and corrosion control
materials.
Designed for the demanding protective coatings market!
2
Our Xtreme Mix’s plural-component sprayers are loaded with features to help
you get the job done right every time! With simple user controls and turn-key
ratio changes, the Xtreme Mix’s are designed to take the guessing out of
plural-component mixing.
3
Air-Operated Pressure Washers
Clean up your facility the quick, easy and efficient way with Graco Hydra
Clean pressure washers! Designed with Graco’s new NXT Air Motor, it’s
ideal for wash down facilities, heavy duty cleaning and maintenance,
shipyards, mining and other industrial applications.
22 Irvine Street
Bayswater WA 6053
Tel: 08 9271 2265 Fax: 08
9271 2235
www.pumpline.com.au
Vacuum Units - Wet Ring
For Sale
Only
WOMVAC V7 - 10m3 @ 27”hg Liquid Ring
Basic Specifications:
One versatile sucker! Boasting a 10m3 debris tank made of 6mm steel, seal water tank with liquid ring prime, correct ratio
gates, powerful hydraulics for rotation slew arm, hydraulic lift arm, hydraulic rear door unlock and lift, acoustic cover and vacuum safety brake these units are ready to perform.
Features:
With a ‘one-stop-shop’ control panel, remote shut and isolation, CAT motor, cyclone separators, water bubble filter, liquid ring
pump, boom, cameras and cab controls, you can’t go past this for value for money and performance. Made for remote area
versatility and brute power, bring-on the challengers!
w w w . w o m a . c o m . a u • [email protected]
Vacuum Units - Dry Blower
For Sale
Only
WOMVAC DB - 9000m3/hr @ 27”hg Dry Blower
Basic Specifications:
With a debris tank made of 250 grade steel and capable of carrying 10T, dry positive displacement blower, discharge and inlet
silencers, vertical direct shift transfer case, bag house complete with 32 filters, powerful hydraulics for hydraulic lift arm, half
rear door unlock and lift, and vacuum safety brake these units will blow your expectations out of the water.
Features:
With a simple control panel, dual cyclone separators, direct driven dry blower, cab controls, you can’t go past this for value for
money and performance. Other specifications and options are available to suit your exacting needs or requirements.
w w w . w o m a . c o m . a u • [email protected]
Water Treatment
PLANT
Basic aspects:
After water jetting, a suspension that consists of jetting water and removed
solid particles is produced. For environmental and health reasons, this suspension needs to be collected and processed. This is a job for the modular
water treatment system.
Working principle:
The suspension is sucked off by a bypass-channel compressor directly at
the plant, and is collected in a vacuum vessel. Then, the suspension is
guided into a reaction vessel by a diaphragm pump. In order to avoid the
sedimentation of the solid particles, the pulp is permanently moved by an
agitating machine. During the agitating period, a precipitation / flocculation
agent is metered. After the agitation, the sedimentation of the slurry in the
reaction vessel starts. Via a clear-water outlet and a slurry outlet, the suspension enters the band-pass filter. During the filtration, a vacuum is
generated at the filter fabric by two air-driven diaphragm pumps. The water that is cleaned due to the filtration, is pumped into
the sewage by the diaphragm pump via a filter based on sand or on activated carbon, respectively. The solids separated during the filtration generate a filter cake on the fibrous web. This cake is removed by a peel-knife and falls into a catcher.
The Technique:
The system consists of the following components:
- Fully automated control system
- Pre-fractionators (conditioning)
- Agitation machine
- Metering unit with precipitation / flocculation agent
- Surface filtration
- Ozone treatment (if necessary)
- Activated carbon filtration
- Catalytic after-treatment (if necessary)
WOMA's modular water treatment system is suitable for
treating process waters from the following applications:
Internal cleaning of vessels and containers
Cleaning of small-diameter pipelines, tube bundles, etc.
Paint stripping from gridirons and body skids
Rehabilitation of structures and buildings
Maintenance of buildings and heavy technical equipment
Environmentally-friendly surface preparation
Emission-free enamel stripping and surface decoating
Decontamination of surfaces
Technical data:
Suspension throughput:
800 l/h to 2000 l/h
(211 to 660 USG ph)
Filter cake moisture:
about. 25-30 %
Electric power rating:
about 15 kW (20 hp)
Required space:
about 9 m² (98 sq.ft)
Total weight:
about 1,000 kg
Feeding device:
plug 380 V / 50 Hz
w w w . w o m a . c o m . a u • [email protected]
Operating
Pressure MAX
Flow
capacity
Working
Speed
Air
Consumption
Air
Pressure
Weight
Pipe
diameter
Part #
1400 Bar
180L/min
16-144 1/min
65 m3/h
6 bar
100KG
=> 45mm
001.1793
Features:
The driving unit consists of an air motor with a continuously adjustable gear, coupling and
rotating swivel which produces the rotation of the high pressure hose and consequently highly
efficient pipe cleaning is achieved.
The hose feeding unit progressively feeds the hose into the tube to be cleaned.
A torque lock prevents the turning of the depressurized hose and a hose safety device is
added to increase operational safety.
The TubeMaster 1400S consists of: driving unit, hose feeding unit, guiding hose DN50 - 3M
long and a hose guide.
w w w . w o m a . c o m . a u • [email protected]
Specialist Safety Clothing
& Equipment
WOMA provides a comprehensive range of Safety Clothing
& Equipment available at very competitive prices!
Ranges from 500 Bar - 3000 Bar - available in various sizes
CONTACT US TO RECEIVE A QUOTATION TODAY!
TST Grease Remover
BOOT 3000
This boot withstands “everything”
within UHP on account of its fixed
aluminium gaiters. The gaiters are
moulded and jointed which gives both
excellent comfort and Mobility.
* Available in various sizes
w w w . w o m a . c o m . a u • [email protected]
Team WOMA!
WOMA (Australia) Pty Ltd – Engineering team, Bibra Lake – specialising in the design of industrial cleaning, maintenance, filtration and decontamination solutions for industry. With both inhouse and consultant engineering solutions, we offer you unbeatable service. We are proud to represent WOMA Positive Displacement Pumps, ALMA Dewatering and Dredge Pumps, STONEAGE
HP, UHP & VAC Accessories and TST Safety Gear.
WOMA (Australia) Pty Ltd – Main Workshops, Bibra Lake – specialising in the design,
fabrication and manufacture of high pressure plunger pumps and high pressure water
jetting systems with manually operated or manipulator and remote controlled water tools and accessories.
WOMA (Australia) Pty Ltd – Spares and Procurement, Bibra Lake – specialising in the
identification, procurement and supply of nozzles, accessories, manipulator and water delivery systems for the high pressure water jetting industry.
CONTACT YOUR NEAREST WOMA REPRESENTATIVE TODAY ...
WA
7 DOBRA ROAD
BIBRA LAKE
WA 6164
TEL: 08 9434 6622
QLD
P O BOX 1311
BUDERIM
QLD 4556
TEL: 07 5448 4114
NSW
UNIT 2/2 SAMANTHA PL
SMEATON GRANGE
NSW 2567
TEL: 02 4648 2311
[email protected] • www.woma.com.au