service tools

Transcription

service tools

STREET
SERVICE TOOLS
TIRE VALVE STEM INSERTER
VALVE CORE REMOVER
•Simplifies the installation of valve stems in tubeless tires
SUG. RETAIL ............$19.95
DRAG
SPECIALTIES
www.dragnetweb.com • partsnetweb.com
PART #
3811‑0031
SUG. RETAIL .............. $3.95
PART #
0365‑0002
OFFROAD
SUG. RETAIL ............$22.95
ATV/UTV
TUBES &
ACCESSORIES
PART #
3810‑0038
•Removes valve cores
•Re-taps inside and outside threads;
reams inside valve
•Works on A.C. unit valves
SUG. RETAIL .............. $1.95
PART #
3810‑0026
SUG. RETAIL ............$12.95
•All-aluminum design with a knurled handle
•Used to remove or install tire valve cores
PART #
PART #
3810‑0042
3810‑0033
VALVE CORE TOOL
4‑WAY TIRE VALVE
REPAIR TOOL
•Screwdriver handle valve core tool
•For extracting and installing tire valve cores
•Repairs core and stem threads
•Has core screwdriver and broken core extractor
•Very small and compact tool
SUG. RETAIL .............. $5.95
3‑WAY VALVE
CORE FISHING TOOL
•Features an 8” high-strength flexible steel cable
•Tipped with a male valve core plug
•The tip is designed to screw into the valve’s stem instead of over
the stem
•Allows you 100% clearance through the hole in your rim
•The handle includes a tire deflator and valve core remover
•Made in the U.S.A.
ALUMINUM
VALVE CORE TOOL
SUG. RETAIL .............. $6.95
SERVICE
TOOLS
VALVE STEM
FISHING TOOL
•Used to pull valve stems and valve stems of inner tube assemblies
through the valve stem hole on vehicle rims
•Tool has three functions: valve stem puller, valve core removal and
tire deflator
•Unlike existing tools on the market, Lang’s valve stem puller threads
into the valve stem rather than over the valve stem
•Makes valve stem and inner tube jobs faster and easier
4‑WAY VALVE TOOL
MERCHANDISING
MP08‑0183
PART #
VALVE STEM PULLER
•Rugged tool handles any length valve in any size of rim
•Screws over valve threads
•Quickly install snap-in valve stems by applying pulling pressure
SUG. RETAIL ............$18.95
CROSS
REFERENCE
•Allows for easy removal and installation of standard Schrader valve
cores in tubed or tubeless Schrader valve stems
•Perfect tool pack accessory
SUG. RETAIL ........................... $6.95
PART #
PART #
3810‑0032
SPOKE
WHEEL‑WEIGHT
REMOVER TOOL
•Designed to allow the tech
to place the split tang of
the tool between the rim and the
weight and tap it off the nipple
with spoke wheel weight hammer
PART #3811-0040
SPOKE WRENCH KIT
•Spoke wrench kit includes all popular
sizes; works for almost any application
•Features 10 heads in sizes 5.2mm through
7mm, with handle and storage case
PART #
3811‑0059
3810‑0031
SUG. RETAIL ............$25.95
PART #
3811‑0030
SUG. RETAIL
$54.95
INDEX
SPOKE WRENCHES
304
SPOKE WHEEL‑WEIGHT HAMMER
•Special hammer for reaching behind
the disc rotor when installing or
removing spoke-type wheel weights
PART #
3811‑0040
SUG. RETAIL
$15.95
•Chrome-vanadium tool steel with hard
nickel-pewter finish
•Square-end openings grip the spoke nipple on all four sides
•Offset slotted ends make it easy and quick to use
DESCRIPTION
5 mm/7mm
6.0mm/6.3mm
6.5mm/6.8mm
2014 TIRE CATALOG
PART #
3811‑0003
MP08‑133
MP08‑157
SUG. RETAIL
$13.95
14.95
13.95
All part numbers in BOLD MAGENTA
are new this year.
SERVICE TOOLS
STREET
•This tool is the helper you need when
changing tires
•Save your knuckles, time and temper
•Simple-to-use design lifts the tire bead away
from the rim in one easy motion, with
one hand
•Makes installing tubes, valve stems and rim
locks a snap, even when working alone
PART #
•Ergonomic plastic molded handle for
increased comfort
•Spooned end prevents tubes from pinching
•Zinc-coated steel
•Measure 101/2” L
•Sold in pairs
SUG. RETAIL ............................. $29.95
PART #
M01066
3810-0017
ENDURO TIRE IRONS
•Fit easily in all Moose Racing packs
•Hot-forged chrome vanadium steel withstands
the toughest use
•8.5” L, weighs only 4.2 oz.
•Includes two irons and vinyl carrying pouch
SUG. RETAIL ............................. $22.95
PART #
OFFROAD
SUG. RETAIL ............................. $28.95
DRAG
SPECIALTIES
TY-ER IRONS
TIRE TAMER
M01065
ATV/UTV
TIRE LEVER
•400mm tire changing lever
SUG. RETAIL ............................. $16.95
PART #
3810-0028
TIREPRO™ TIRE LEVER SET
•Forged carbon steel won’t bend or break
•Spoon shape ideal for easy tire removal
without pinching tubes
•9” length fits into most fanny packs; includes
vinyl pouch
SUG. RETAIL ............................. $41.95
PART #
3810-0034
TUBES &
ACCESSORIES
TIRE IRON SET
•High quality 3-piece tire iron kit
•Includes one 400mm curved and two 240mm
tire irons
SUG. RETAIL ............................. $14.95
ENDURO PRO TIRE IRONS
•Hot-forged chrome vanadium steel
•Designed for the professional ISDE rider as
well as the weekend warrior
•81/2” long and weigh just 41/2 oz.
•Slender curve
•Sold as pair with a custom vinyl carrying pouch
•Curved end fits securely in the hand
•Hard nickel pewter finish
•10” long and weighs 4.2 oz.
•Recommended by top tire changers
PART #
PART #
PART #
SUG. RETAIL ............................. $17.95
3810-0018
SUG. RETAIL ............................. $19.95
P504
SPOON-TYPE TIRE IRON
SUG. RETAIL ............................. $16.95
P503
MP08-115
P519
P530
CROSS
REFERENCE
•Perfect size for adventure touring and
trail riders
•Forged tire lever set features 8mm, 10mm,
12mm, 13mm, 14mm and 17mm wrench sizes
in the handles for emergency repairs
•Sold as a pair
MERCHANDISING
TIRE LEVER SET
3810-0001
SERVICE
TOOLS
PART #
STEEL TIRE IRONS
DESCRIPTION
81/2” card of 10
PART # SUG. RETAIL
P503
$3.95 (ea.)
are new this year.
DESCRIPTION
PART # SUG. RETAIL
111/2” card of two P530
$9.95
INDEX
•Cold-forged steel
•81/2” steel tire irons on display card of 10; sold each
•111/2” steel tire irons skin-packed two per card; sold in pairs
•16” double-compound-curved tire iron; sold each
DESCRIPTION
16” tire tool (ea.)
PART # SUG. RETAIL
P519
$15.95
2014 TIRE CATALOG
305
SERVICE TOOLS
3810‑0007
STREET
3810‑0002
3810‑0048
PART #
DESCRIPTION
T‑6 TIRE LEVERS (EA.)
12/13mm
3810‑0002
22mm (ea.)
3810‑0003
24mm (ea.)
3810‑0004
27mm (ea.)
3810‑0005
32mm (ea.)
3810‑0006
T‑6 COMBO TIRE LEVERS (SET OF TWO)
22mm and 12/13mm
3810‑0048
SUG. RETAIL
$41.95
39.95
39.95
39.95
39.95
PART #
DESCRIPTION
T‑6 COMBO TIRE LEVERS (SET OF TWO) (CONT)
24mm and 12/13mm
3810‑0049
3810‑0050
27mm and 12/13mm
32mm and 12/13mm
3810‑0051
3/8” DRIVE ADAPTERS (EA.)
24mm
3810‑0007
27mm
3810‑0008
SUG. RETAIL
$79.95
79.95
79.95
20.95
20.95
79.95
ATV/UTV
OFFROAD
DRAG
SPECIALTIES
T6 TIRE LEVERS
•Tire spoons with axle nut hex wrench or rim lock nut set available individually or in combo sets
•Perfectly contoured tire lever on one end and a unique combination stepped 12/13mm box end wrench on other
end for turning rim lock nuts or a hex box wrench sized for axle nuts on other end
•Made from lightweight forged 7075 T-6 aluminum
•Hard anodized finish
•Under 10” in length and weigh only 3.5 oz.
•Hex ends for axle nuts are rated for a maximum torque of 90 ft-lbs
CROSS
REFERENCE
MERCHANDISING
SERVICE
TOOLS
TUBES &
ACCESSORIES
ATV BEAD BUSTER
•Heavy-duty Bead Buster easily
removes old hard tires from
rusty rims as well as safety
bead tires from wheels
•Innovative tire tool features
a leverage arm connected
to a vertical breaking shoe
that pushes straight down
on the bead rather than a
conventional bead breaker
with an arcing motion
•Applying the force straight down
breaks the bead much easier on old or
stubborn tires; the vertical motion also
prevents the shoe from sliding down the
sidewall and pulling away from the bead
•Accessory kit sold separately
•Accessory kit includes center post thread
protector, installation/removal bar and
wheel holder
DESCRIPTION
Bead buster
PART#
3810‑0052
SUG. RETAIL
$624.95
3‑IN‑1 TIRE BEAD STARTER/
SEATER/EXPANDER
3810‑0052
•All-in-one answer to stubborn tires is a must
in any tire center
•Easy to use; just mount tire to wheel, position
bead starter, then cinch down with ratchet lever. Add air until
bead begins to engage, then slowly ease belt tension as more
air is added
SUG. RETAIL .....$93.95
3810‑0023
3810‑0012
DESCRIPTION
Accessory kit
PART#
3810‑0012
SUG. RETAIL
$211.95
ATV BEAD
BREAKER
QUICK‑RELEASE KNOB
FOR BEAD BUSTER
•Breaks bead on 8”, 9”, 10” and 11” wheels
in seconds
•Zinc-plated construction; weighs just 5 lb.
•Easy two-hand operation
•Small enough to pack along on hunting
trips or your next visit to the track
•Won’t damage tires and rims
SUG. RETAIL ...................$99.95
PART #
•Cuts the time needed to break an ATV bead by 25%
•Slips over the threaded part of shaft on K&L bead buster
PART #3810-0052
•Slides into place in less than one second
•Requires less than one turn to tighten
PART #
8000‑1270
SUG. RETAIL ..... $66.95
PART #
3810‑0024
INDEX
TIRE BEAD BREAKER
306
•Heavy-duty cast-iron alloy
construction; 51/2 lb.
•Measures 8” x 63/4” x 13/4”
•Separates beads on all on-road and off-road bikes
•Packaged with instructions
•Not for 170 or larger tires
SUG. RETAIL .................. $52.95
PART #
TIRE BEAD TOOL
•Easy help while mounting
tire on the rim
•Perfect tool for compressing tire bead during tire changing
4000
SUG. RETAIL ..... $18.95
2014 TIRE CATALOG
PART #
3810‑0039
are new this year.
SERVICE TOOLS
STREET
BEADPRO TIRE BEAD
BREAKER AND
LEVER TOOL SET
DRAG
SPECIALTIES
•Innovative multi-use tire tool set
•Breaks the bead on most street and off
road motorcycle tires
•Integrated tire spoons for tire removal
and installation
•Light weight and compact size is perfect for tool packs
•Ergonomic handles with crossguard to keep hand from riding forward
•Forged 7075 T-6 aluminum construction for strength and durability
•Black anodized finish
SUG. RETAIL ............................
•Patent pending
$79.95
PART #
3810-0041
OFFROAD
T-6 TRAIL
BEAD BUDDY
BEADPRO FS
(FORGED STEEL)
3810-0053
3810-0015
SUG. RETAIL
$15.95
32.95
SUG. RETAIL ....... $8.95
PART #
are new this year.
3811-0016
PART #
3810-0025
RIMSHIELD II
•New, improved version of
original RimShield
•Made with genuine DuPont™
Zytel® super tough nylon
resin for unmatched strength
and durability
•Prevents rim damage from tire levers during tire changes
•Dual raised beads facilitate inserting tire lever under tire bead and
prevents tire lever from slipping
•Won’t mar wheels
•Handholds make it easy to insert and remove
•Long apron protects hands and spokes
•Patented design
•Sold in pairs
SUG. RETAIL ............$14.95
2014 TIRE CATALOG
PART #
INDEX
RIM PROTECTORS
•Protect your wheels from scratches and
dings caused by tire changing tools
•Include retrieval cord for easy use
•Sold in pairs
SUG. RETAIL ............$19.95
CROSS
REFERENCE
PART #
3810-0027
3810-0015
•Designed for breaking the bead on
on-road and off-road motorcycle tires
•Great for the shop, trail or on the road
•Compact and lightweight (only 3.7 oz.),
stores easily in your emergency tool
pack or tool box
•Can be used with the wheel on or off
the motorcycle
•Will not scratch the wheel
•Easier and more convenient than press or lever tools
•Made of a durable, high-impact plastic
•Not for use on ATV tires
MERCHANDISING
•Bead Buddy II PART #3810-0027
is an improved design of the
original Bead Buddy
•Durable 6061 aluminum construction with blue
anodized finish and laser engraved logo
•A must for installing Bib Mousse tubes
•Used to push the tire bead down into the drop
center of the rim on off-road wheels while using 3810-0027
tire tools to change tires
•Hooks over spoke and pushes bead down on opposite side of tire from
tire irons
•No more fighting to keep bead down while installing off-road tires
•Patent pending
•Supermoto Bead Buddy PART #3810-0015 for use on 3.5”-5” wheel widths
DESCRIPTION
Bead Buddy II
Supermoto Bead Buddy
3810-0016
BEAD POPPER
PART #
BEAD BUDDY II
AND SUPERMOTO
BEAD BUDDY
PART #
SERVICE
TOOLS
SUG. RETAIL ............$59.95
SUG. RETAIL ............$11.95
TUBES &
ACCESSORIES
•Heavy-duty shop version of Motion Pro’s
innovative BeadPro tire tool
•Innovative multi-use tire tool set
•Breaks the bead on most street and
off-road motorcycle tires
•Integrated tire spoons for tire removal
and installation
•16” L handles makes removing and
installing tires a breeze
•Ergonomic design with crossguard to
keep hand from riding forward
•Chrome vanadium forged steel
construction for heavy-duty shop use
•Durable black oxide finish
•Patent pending
ATV/UTV
•No more fighting to keep the bead
down while installing or repairing
your off-road tires
•Assists in pushing the tire bead down into the drop center of the rim
while using tire tools to change tires
•Machined from tough 6000-series aluminum
•Lightweight and compact enough for any tool pack
•Delrin®-securing thumb screw keeps rims scar-free
•Not recommended for use with Bib Mousse-type off-road tubes
3811-0070
307
SERVICE TOOLS
TUBES &
ACCESSORIES
ATV/UTV
OFFROAD
DRAG
SPECIALTIES
STREET
RIM PROTECTORS
•Fit over rim edge to prevent scratches and galling
from tire tools when installing tires
•Two-piece set allows random placement of
protectors around the rim
•Pull-cord for easy release; prevents protector from
getting lost on inside of rim
•Constructed of tough thermoplastic, and strong
nylon cords
•Keeps rims looking new
RIM LOCK DAMPER
NYLON RIM SAVERS
•Slip easily over alloy rims
•Protect finish from tire tools when changing tires
•Sold in pairs
NOTE: Trim ends for ATV use.
SUG. RETAIL ........................................ $9.95
SUG. RETAIL ........................................ $9.95
PART #
PART #
3811-0069
DS-380311
•Installs under rear rim lock (1.85,
2.15 or 2.5)
•Reduces stress on spokes and
rim lock
•Helps prevent rim lock from
shifting under heavy acceleration
and braking
•Sold each
SUG. RETAIL .............. $1.95
PART #
0220-0023
TREAD DOCTOR SNIPER KIT™
•Includes a Tread Doctor Knobby Cutting Tool with Sniper Kit™
•Custom cut your own lug patterns and get sharper knobbies on worn tires
•This kit includes a Tire Sniping cutting head, 10 replacement blades and our specially designed heated
carbide cutting blade used on the Tread Doctor™
•With the Tread Doctor Sniper Kit, you can sharpen your knobbies with the cutting blade and then
change heads to snipe your tire for the ultimate custom traction tire
•Tread Doctor lightweight heated tool lets you custom-design your tread pattern easily and quickly
with the tire sniper, then quickly switch heads and cut new edges into your dull, worn-out knobby
tires; refresh your front or rear tire before installing a new one and save money
•Tread Doctor Sniper Kit extends the life of your tire and gives you optimal tire performance
throughout the life of your tires
•Use for motocross, trail, ATV/UTV, enduro and flat track racing and riding
•Unit Includes on/off switch and holding stand
•Built to UL standards for design, construction and operation
•Made for enthusiasts by enthusiasts
SERVICE
TOOLS
SUG. RETAIL ............................................................... $79.95
PART #
3810-0057
White
3810-0059
INDEX
CROSS
REFERENCE
MERCHANDISING
Silver
308
Yellow
3810-0058
Red
TREAD DOCTOR KNOBBY
CUTTING TOOL™
•Tread Doctor Knobby Cutting Tool™ provides
new traction on worn tires
•Lightweight heated carbide blade cuts new
edges into your dull, worn-out knobby tires
•Refresh your front or rear tire before installing a new one – extends the
life of your tire
•This easy do-it-yourself tool gives you new traction for every ride
•Use for motocross, trail, ATV/UTV, enduro and racing
•Unit includes on/off switch and holding stand
•Brass sniper cutting head (sold separately) adds tire sniping ability to your
Tread Doctor Knobby Tool
•Snipe tires for custom patterns – perfect for flat track, enduro and motocross
•Fits any Tread Doctor heating iron
•Includes one brass cutting head and 10 replacement cutting blades
•Made for enthusiasts by enthusiasts
•Add a custom touch to tires
•Valve-action wick tip makes application easy
•Specially formulated ink stays on
•Available in five colors
SUG. RETAIL
•Sold individually
DESCRIPTION
Tread Doctor Knobby Cutting Tool
Tread Doctor sniper tool
COLOR
White
Yellow
PART #
3810-0059
3810-0058
SUG. RETAIL
$59.95
24.95
Orange
TIRE PENS
2014 TIRE CATALOG
PART #
F71-1000
F71-1001
COLOR
Red
Orange
PART #
F71-1002
F71-1003
............$13.95
COLOR
Silver
PART #
F71-1004
are new this year.
SERVICE TOOLS
0365-0052
STREET
Shown with
optional
Strongarm II
0365-0038
0365-0040
SUG. RETAIL ......... $107.95
PART #
0365-0037
DESCRIPTION
Tire changer and Strongarm II
Tire changer only, blue
Tire changer only, red
Strongarm II only
PART #
0365-0039
0365-0038
0365-0052
0365-0040
SUG. RETAIL
$2,229.95
1,649.95
1,649.95
623.95
TUBES &
ACCESSORIES
ORDERING INFORMATION: NO PARTSNET/DRAGNET WEB ORDERS. THESE ITEMS ARE
DROP SHIPPED FROM K&L. NO RETURNS.
ATV/UTV
TIRE CHANGER
AND STRONGARM II
•Tire changer is specifically designed
for motorcycle tire changing
•1.5 hp motor
•Handles 6”-24” wheel diameter; 2”-10” tire width
•Strongarm II helps with new generation tires like Touring and Police
bikes that have extremely stiff sidewalls
•Strongarm II uses air pressure to assist holding tire’s bead in the drop
center of wheel, even while turntable is revolving
•Strongarm II mounting system is designed to work with most popular
tire machines and helps to keep tire changes a one-person job
PORTABLE TIRE
CHANGING STAND
•Holds wheel in place during tire change
•Makes changing tires an easier job
•Compatible with wheels from 17” and up
•Breaks down for easy storage
•Great for trackside or shop use
PART #
0365-0016
SERVICE
TOOLS
SUG. RETAIL ............$75.95
MERCHANDISING
TIRE STATION
TIRE-CHANGING STAND
AND AIR TANK HOLDER
PORTABLE
TIRE CHANGER
•Adjustable for changing tires
at a comfortable work height
•Holds wheel in place during
tire change
•Makes changing tires an easier job
•Comes with a reducer mini ring
•Compatible with wheels from 10” and up
•Breaks down for easy storage
•Great for trackside or shop use
0365-0034
SUG. RETAIL ............$99.95
2014 TIRE CATALOG
PART #
INDEX
are new this year.
PART #
CROSS
REFERENCE
•Combine with your air tank
to make the ultimate
tire-changing station
•Forms a cage around your air tank
and protects it
from damage
•Works best with 5- to 10-gallon air
tanks (14.5” to 24.5” in length and
9” to 12.75” in diameter)
•Can be used with or without air
tank installed
•Durable steel construction
•Long-lasting powder-coat finish
•The perfect pit accessory
•Air tank not included
•Not recommended for use with street wheels
SUG. RETAIL ......... $124.95
OFFROAD
•Makes tire changing a breeze
•Great for shop or portable enough for track use
•Fits most motorcycle wheels from 16” to
21” in diameter
•Heavy-duty steel construction, long handle for
maximum force for breaking the toughest beads
•Solid wide base makes for solid foundation during use
•Rubber-coated top ring helps protect wheel from scratching
•Adjustable bead popper
•Black powder-coated finish and zinc-plated for years of use
•Center post with wing nut keeps rim locked down during procedure
DRAG
SPECIALTIES
TIRE CHANGING
STAND WITH
BEAD BREAKER
0365-0009
309
SERVICE TOOLS
DRAG
SPECIALTIES
STREET
OFFROAD
MOTORCYCLE WHEEL BALANCER
•Performs both static single plane and dynamic dual plane balancing
•Operates in grams or ounces
•Includes universal motorcycle clamp and tapered mounting cones
•Includes 15, 16, 17, and 19mm centering bushings
NOTE: ORDERING INFORMATION: NO PARTSNET/DRAGNET WEB ORDERS. THIS ITEM IS
DROP SHIPPED FROM K&L. NO RETURNS.
PART #
0365‑0057
•Balances and trues all 14” to 21” motorcycle wheels
•Wheels mount to adjustable center cones or ball bearings for trueing
and static balancing
•Adjustable frame rails accommodate wide rims and wheels
•Constructed of lightweight steel and plated in zinc
SUG. RETAIL ......... $296.95
PART #
INDEX
35‑8621
•Check your cranks and fork tubes for runout;
balance spoke and cast wheels
•11” between points
•Handles rims up to 21”
•Dial indicator not included; available separately
•Indicator arm assembly included (for PART #35-8428)
PART #
35‑9573
SUG. RETAIL
$562.95
DIAL INDICATOR
GAUGE WITH
MAGNETIC BASE
•For use with dial indicator gauge
•Features an easy-to-use on-off knob
•Flexible indicator mounting arm locks into
place to make any job easy
•Reads 1.0” in increments
of .001”
•Gauge can be locked for
a zero setting
•Includes magnetic base stand
that has an adjustable dial
indicator mounting arm for a wide
range of applications
PART #
3850‑0014
PART #
3850‑0013
MAGNETIC BASE
FOR DIAL INDICATORS
310
3‑IN‑1 TRUEING STAND
WHEEL TRUEING
AND WHEEL BALANCE STAND
CROSS
REFERENCE
MERCHANDISING
SERVICE
TOOLS
TUBES &
ACCESSORIES
ATV/UTV
SUG. RETAIL ........................................................ $1,645.95
SUG. RETAIL
$121.95
DIAL INDICATOR GAUGE
FOR 3‑IN‑1 TRUEING STAND
•Dial indicator gauge features 21/4” face with
1” sweep in 0.001” increments
•Use with 3-in-1 Trueing Stand
(PART #35-9573)
SUG. RETAIL
$97.95
2014 TIRE CATALOG
PART #
35‑8428
SUG. RETAIL
$41.95
are new this year.
SERVICE TOOLS
0365-0003
•Axle diameter is 12.68mm
•Can be used to balance mounted tires or
true wheels with optional magnetic base dial
indicator (see TOOLS section)
•Most accurate balancing method available
•Employs the same balancing method as used by most race groups
•Optional adapter for BMW, Ducati, Harley® and VFR sold separately
PART #
SUG. RETAIL
0365-0003
$157.95
0365-0004
0365-0005
0365-0007
0365-0006
69.95
34.95
33.95
34.95
1
SUG. RETAIL ......... $109.95
PART #
0365-0058
OFFROAD
DESCRIPTION
STAND
Balancing stand
ADAPTERS
BMW
Ducati
Harley®
VFR
•Precision-built tool for
building, truing and
balancing wheels
•Innovative single-sided
design allows easy access to
spokes and nipples
•High-quality bearings allow
precise wheel balancing
•15mm axle fits most modern street and dirt
bikes and many mini bikes
•Quick-release lock on outer cone is easy to
operate and holds wheel securely
•Adjustable pointer for truing wheels
•Simple folding design for easy storage when
not in use
•Can be used with dial indicators (not included)
•Durable powder-coat finish
DRAG
SPECIALTIES
WHEEL
BALANCING
STAND
1
STREET
WHEEL AXIS
TRUING-BALANCE
STAND
Not for use w/ 5-bolt wheels.
ATV/UTV
WHEEL BEARING
DRIVER SET
SUG. RETAIL ............$74.95
TUBES &
ACCESSORIES
•Fits bearing with 12-25mm i.d.
and 32-47mm o.d.
•Adapters can be changed quickly to accommodate
a wide range of bearing combinations
•Durable steel handle and anodized aluminum drivers
•Can be used with a hammer or shop press
•Laser-etched adapters for easy identification
•Comes with protective blow-molded case
PART #
3805-0111
KINGPIN WHEEL/
TIRE CARRIER
SUG. RETAIL ......... $269.95
PART #
SERVICE
TOOLS
•Must-have for serious racers and riders!
•Holds up to four complete wheels with tire warmers
•Collapsible design for easy transportation
•Durable powder-coat finish with simple assembly
3850-0093
MERCHANDISING
FORMULA-8 TIRE
MOUNTING LUBES
•Makes tire mounting and
removal easy
0365-0050
•Dries to help prevent tire and
tube slippage
•16 fl. oz. bottle, 12 per case; gallon jugs, 4 per
case; sold each
PART #
0365-0050
SUG. RETAIL
$10.95
DESCRIPTION
Gallon
PART #
0365-0051
SUG. RETAIL
$29.95
•Gauge visually displays when tires should be replaced due to tread wear
•Sold as 10-pack
SUG. RETAIL .............. $2.95
TECH GLOVES
SIZE
Medium
Large
are new this year.
PART #
3350-0161
3350-0162
SIZE
X-large
XX-large
$24.95
3810-0060
INDEX
•Constructed from durable and washable premium synthetic leather
•Extended cuff for snug fit and extra wrist protection
•Reinforced palm with ergonomic padding
•Perforated palm and fingers for increased ventilation
•Comfort fit conforms to a variety of hand positions
•Sleek design for easy maneuvering in
SUG. RETAIL .............................
tight places
PART #
CROSS
REFERENCE
DESCRIPTION
16 oz.
TREAD DEPTH TIRE GAUGE
0365-0051
PART #
3350-0163
3350-0164
2014 TIRE CATALOG
311
4110‑0031
4110‑0053
4110‑0052 Shown with
optional side panels, side
ramps and front extension
panel
DRAG
SPECIALTIES
STREET
SERVICE TOOLS
4110‑0057
CROSS
REFERENCE
MERCHANDISING
SERVICE
TOOLS
TUBES &
ACCESSORIES
ATV/UTV
OFFROAD
HEAVY‑DUTY AIR LIFT
•M625R made of heavy-gauge metal
•Steel-framed base for extra support on uneven surfaces
•Smooth-operating “Dual Ram” air cylinders
•Front and rear drop panels
•Reinforced center stand area
•1,750-lb. lifting capacity with a 29.5” x 86.5” deck
•15” W loading ramp included
•40” maximum height; low 8.5” minimum height
•Optional fast-mount side panel set increases the working width to 59”,
allowing the widest utility vehicles and golf carts to be serviced
•Optional front or rear 24” extension panel fits oversize ATVs and matches the lift deck width of 29.5”
•Optional wheel clamp has a self-locking clamp that allows one person to load motorcycle onto lift
4120‑0008
NOTE: ORDERING INFORMATION: NO PARTSNET/DRAGNET WEB ORDERS. THESE ITEMS ARE DROP SHIPPED FROM K&L. NO RETURNS.
PART #
DESCRIPTION
AIR LIFT
Gray/blue
Gray/red
Gray/gray
OPTIONAL ACCESSORIES
Front or rear extension panel (sold each)
Standard side panel set
SUG. RETAIL
4110‑0052
4110‑0053
4110‑0054
$1,699.95
1,699.95
1,699.95
4110‑0033
4110‑0055
176.95
476.95
PART #
DESCRIPTION
OPTIONAL ACCESSORIES (CONT)
Wide side panel set
Trike side panel set
Wide trikeside panel set
MC10 wheel clamp
Lift dolly
4110‑0057
4110‑0056
4110‑0058
4110‑0031
4120‑0008
SUG. RETAIL
$529.95
377.95
388.95
215.95
105.95
AIR LIFT
MC615R
•24” x 84” deck with
rear drop panel offers
1,000-lb. capacity
•Max raised height of 35”;
lowered height is 7.25”
•Automatic safety locks and
loading ramp included
•CE-approved covered dual pedals reduce
chance of accidental actuation
•Optional side panel set increases width
from 24” to 48”; includes four panels and
two ramps
•Wheel clamp not included
4110‑0049
4110‑0059
ORDERING INFORMATION: NO PARTSNET/DRAGNET
WEB ORDERS. THESE ITEMS ARE DROP
SHIPPED FROM K&L. NO RETURNS.
DESCRIPTION
LIFT
Blue
Gray
Red
PART #
4110‑0049
4110‑0050
4110‑0051
SUG. RETAIL
$1,292.95
1,292.95
1,292.95
DESCRIPTION
ACCESSORIES
Side panel set
MC10 wheel clamp
PART #
4110‑0059
4110‑0031
SUG. RETAIL
$351.95
215.95
37‑9885
INDEX
MULTI‑LIFT
•4-ton bottle jack; 1,200-lb. capacity
•Three height positions: 4.5”, 9” and 17”
•16” padded contact area; even lift with no listing
•Foot-operated valve and locks; locking neoprene casters
•1.5” square steel tubing
DESCRIPTION
Multi-lift
Adapter plate for 91-03 Dyna
312
2014 TIRE CATALOG
PART #
37‑9885
35‑0806
SUG. RETAIL
$411.95
67.95
are new this year.
SERVICE TOOLS
37‑9841
STREET
4110‑0035
Shown with
center jack
CENTER JACK AND
H‑D TRIKE ADAPTER
SUG. RETAIL
$357.95
77.95
DESCRIPTION
Center stand
Sport jack adapter
Optional non-skid mat
PART #
37‑9841
4110‑0046
4110‑0010
SUG. RETAIL
$275.95
235.95
17.95
4120‑0004 shown
with 4110‑0011
(sold separately)
ATV/UTV
DESCRIPTION
Center jack
H-D trike adapter
CENTER JACK
•Table top is 5” W x 16” L
•Height adjusts from 3.5” to 13”
•Available in zinc finish
•Optional sport jack adapter lifts sportbikes without hassles and
potential damage to expensive fairings by raising bike via frame
•Optional rubber nonskid pad mounts to top surface of center jack with
self-adhesive backing
OFFROAD
•Wide footprint offers stability
•Keeps the weight centered – an important
safety consideration
•3.5” minimum and 13” maximum height
•Deck measures 23” L x 5.5” W
4120‑0009
•12.5” base width
•1,100 lbs. maximum weight
•Trike adapter must be ordered to lift H-D trikes with center jack;
sold separately
PART #
4110‑0035
4120‑0009
DRAG
SPECIALTIES
4110‑0046
TUBES &
ACCESSORIES
FAT JACK DOLLY
SUG. RETAIL
$142.95
PART #
4120‑0004
SERVICE
TOOLS
FAT JACK CENTER JACK
•Dolly makes the Fat Jack PART #4110-0011 mobile
without having to attach permanent wheels
•Maximum weight capacity is 600 lb.
•Easy-to-use scissor jack is the answer for raising bikes
and ATVs
•Lifts front or rear of bikes that are on MC600-type lifts
•Wide deck with rubber nonskid pad increases lifting
area for increased stability
•Measures 16” L x 10” W
•Includes rubber pad
SUG. RETAIL
$284.95
4110‑0048
MERCHANDISING
PART #
4110‑0011
CENTER JACK
DESCRIPTION
Standard center jack
Narrow center jack
are new this year.
PART #
4110‑0048
4110‑0065
SUG. RETAIL
$149.95
139.95
PART #
4110‑0036
2014 TIRE CATALOG
INDEX
NOTE: Do not use air or electric impact guns to raise and lower the jack.
SCISSOR LIFT
•Easily lifts your bike free
and clear of the ground
•Provides a stable base
for performing routine maintenance
•Slips under the frame rails of most motorcycles
•Lifts up to 1,000 lb.
•Worm-drive lift mechanism makes raising or lowering the bike
nearly effortless
•No messy hydraulics to deal with
•Measures 31/2” collapsed and 83/4” extended
•Durable black powder-coat and long-lasting heavy-duty
steel construction
CROSS
REFERENCE
•Sturdy, yet affordable scissor jack
for lifting motorcycles for service
or cleaning
4110‑0065
•Large footprint makes the jack stable
•Strong enough to lift an entire motorcycle
•Durable rubber top pad protects the motorcycle and prevents slipping
when raising or lowering the jack
•Heat-treated hex drive turns robust worm gear for precise
height adjustment
•Lowered height: 31/2”; maximum raised height: 141/2”
•Standard center jack deck measures length: 151/4”; jack width: 9”
•Narrow center jack deck measures length: 15”; jack width: 5”
•Capacity: 1,000 lb.
SUG. RETAIL
$199.95
313
ATV/UTV
OFFROAD
DRAG
SPECIALTIES
STREET
SERVICE TOOLS
LIFT CADDY
•Easily moves your lift and
machine around the shop
•Installs in less time than it
takes to change oil
•Includes two heavy-duty 360° casters and mounting stand capable of
handling heavyweight motorcycles
•Fits all lifts that have 2” square bottom cross member and 15” of
mounting room on cross member
•Width adjusts from 13” to 20” at base
•15” maximum height
•Swiveling neoprene wheels
PART #
4110‑0047
PART #
35‑9872
TUBES &
ACCESSORIES
SERVICE
TOOLS
MERCHANDISING
CROSS
REFERENCE
INDEX
SUG. RETAIL
$197.95
SHOP DOLLY
ROLLASTANDS
SUG. RETAIL
$307.95
RS‑00001
•Designed for bikes without centerstands
•Wheel positioned in Rollastand or Deluxe Rollastand turns easily for
cleaning, chain adjustment and other maintenance jobs
•Easy one-person operation
•No danger of dropping bike
•Sealed bearings
•Nonslip backing
•Rollastand is available in red powder-coat; Deluxe billet aluminum
Rollastand has a black finish
DESCRIPTION
Rollastand, red
Deluxe Rollastand, black
1
314
RS‑00002
PART #
RS‑000011
RS‑00002
SUG. RETAIL
$29.95
42.95
Not for Harley-Davidson® or metric cruiser.
TUBELESS PUNCTURE PILOT KIT
•Ideal for motorcycles, scooters, mowers, small tractors, golf carts and ATVs
•Kit allows you to make an on-the-wheel repair to your tubeless tire and
re-inflate it on the spot
•Includes the Pocket Tire Plugger with 15 mushroom-shaped rubber plugs
and the compact mini air compressor
•Mushroom plugs measure 5/16” diameter shaft x 3/4” in length and work on
all tubeless tires
•Kit fits into a durable zippered canvas case that measures only 7” x 4” x 3”
and weighs just 1.7 lbs
•12 Volt compressor unit features built-in gauge and LED Light, 66” power
cord that fits Battery Tender connectors, 12” alligator extension clips, 36”
extension lighter adapter and 4” tire valve hose with sports needle and
inflatable adapter
SUG. RETAIL ............................................................... $69.95
PART #
0363‑0055
SG‑103
TIRE REPAIR KITS
•Immediate roadside repair and reinflation of a punctured tire
•Tube/tubeless kit contains a buffer stitch tool, rubber cement, three
11/4” round patches, two 2” round patches, one 15/8” x 3” oblong patch,
five 41/2” reinforced string plugs, a split-eye needle insertion tool; also
includes an Engine Air Pump, 5’ hose with spark plug adapters, quickrelease lever that converts the motor into an air compressor, a rasp
tool, valve cap/core remover, hand cleaner and towel, three patch/
plugs (from the inside/out) and two 91/2” steel tire levers in a 91/2” x 4”
vinyl zippered pouch
•CO2 tube/tubeless kit contains the above patches and plugs, plus four
CO2 canisters and adapter for immediate inflation; also includes rubber
cement, repair tools, valve cap, replacement core, hand cleaner and
towel in a zippered vinyl pouch
•Engine Air Pump with adapters, 5’ hose and carrying pouch also
sold separately
•Replacement parts also available
SG1066
0363‑0006
NOTE: CO2 cartridges cannot be transported on an aircraft.
DESCRIPTION
Deluxe kit
CO2 kit
Patch/plugs (6-pk.) and rubber cement
PART #
SG‑1031
SG1066
3002
SUG. RETAIL
$52.95
36.95
14.95
DESCRIPTION
Engine Air Pump w/ adapters and hose
Tire patches (6-pk.) and rubber cement
1
PART #
0363‑00061
3003
SUG. RETAIL
$31.95
6.95
Easy access to spark plugs required for best results.
2014 TIRE CATALOG
are new this year.
SERVICE TOOLS
STREET
0364‑0001
FOR TUBELESS TIRES
DESCRIPTION
Pocket Tire Plugger
Pocket Tire Plugger w/ CO2
Repair plugs (50‑pk.)
PART #
0364‑0001
0363‑0003
3075
SUG. RETAIL
$37.95
53.95
15.95
PART #
0363‑0004
AUTOMATIC TIRE
INFLATION KIT
•Kit contains four canisters
of CO2 and a reusable valve
adapter with brass fittings
•Each canister produces 8‑9
lb. of pressure; generally
takes all four canisters to reach 24‑32 lb. of pressure, depending on the
size of the tire
•Can be used on a variety of vehicle tires
SUG. RETAIL ............$24.95
PART #
0363‑0005
SUG. RETAIL
$21.95
TUBELESS TIRE PLUG GUN
PART #
•On‑the‑wheel repair for all tubeless tires
•Gun inserts a natural rubber plug into the puncture area that expands
under pressure to seal the hole
•Mushroom‑shaped head seats on the inner wall
•Includes plug gun, nozzle and probe tool, retractable razor knife,
reaming tool, 25 mushroom plugs, instructions and 9” x 6”
zippered pouch
•Extra plugs sold in bags of 50
0363‑0040
SUG. RETAIL ............$47.95
PART #
1075
CROSS
REFERENCE
•Portable 12V compressor
measures only 4” x 2” x 6” and
weighs just 14 oz.
•Features a built‑in LED light and
0‑120 psi gauge
•4” tire valve hose; 66” power cord
•12” extension alligator clips; 36” extension lighter adapter
•Includes sports needle adapter, inflatable adapter, complete
instructions and rugged zippered carry case
MERCHANDISING
MINI AIR
COMPRESSOR
SUG. RETAIL ............$39.95
0364‑0032
SERVICE
TOOLS
DESCRIPTION
ATV tubeless tire repair kit
PART #
TUBES &
ACCESSORIES
•Kit contains everything to make
a speedy repair of tubeless ATV
tires while still on the rim: split‑
eye tool, five plugs, CO2 canisters,
rubber cement and adapter, all in
a handy zippered pouch
•Simply push the repair plug straight into the puncture and pull the tool
straight out; plug material is extremely pliable so trimming is an option
•Each CO2 canister provides 8‑9 lb. of inflation at 850 psi; that means
each of these canisters will fully inflate an ATV, golf cart, rider mower or
utility vehicle tire
SUG. RETAIL ............$20.95
ATV/UTV
ATV TIRE REPAIR KIT
•Sometimes tubeless tires can
sustain damage that is beyond the ability of a mushroom plug
•A tear from jagged items can require the use of what is known as a
string or rope plug
•Kit includes 20 brown rubber reinforced inserts (each 4” long), sturdy
T‑handle reamer, T‑handle insertion tool, tube of rubber cement,
retractable razor blade, repair instructions and a durable zippered
canvas bag
•Kit measures 5” x 2” x 6” and weighs only 11 oz.
OFFROAD
•Revolutionary new device easily installs mushroom‑shaped rubber plugs
into all tubeless tires on the wheel
•Plugging device drives the plug into the hole with a twist of the Allen
wrench; plug then expands under pressure to fill the punctured area;
a firm pull on the stem seats the mushroom head on the inner wall
allowing no air to escape
•Pocket Tire Plugger kit includes plugging device, nozzle adapter, rasp
tool, probe tool, retractable razor knife, Allen wrench, 15 mushroom
plugs (5/16” dia. x 3/4” L stem), laminated instructions and comes in
31/2” x 71/2” zippered pouch; total weight only 12 oz.
TUBELESS
T‑HANDLE TIRE
REPAIR KIT
DRAG
SPECIALTIES
POCKET TIRE
PLUGGERS
TUBELESS TIRE PATCH/PLUGS
DESCRIPTION
Patch/plugs (6‑pk.) and rubber cement
are new this year.
PART #
3002
INDEX
•Inside/out patch plug for stopping air leaks caused by punctures
•Includes six patch plugs, an abrasive thumb buffer, and a .50 fl. oz. tube of rubber cement
•Requires removing the tire from the wheel
•Plug measures 32mm and features a metal quill to quide through the puncture
SUG. RETAIL
$14.95
2014 TIRE CATALOG
315
SERVICE TOOLS
STREET
OFFROAD
DRAG
SPECIALTIES
POWER SPAIR FLAT TIRE
REPAIR KIT
•Fast, easy and safe 48-piece kit includes
every tool needed to effectively repair
flat tires
•Plugs into 12V power outlet; cord length
measures 10’
•Bright LED light for use during nighttime
emergencies
•Works on any vehicle and is tire pressure
sensor friendly; inflates a mid-size car tire
in 3 minutes
•Includes air compressor, rugged storage
case, 24 fl. oz. Slime Tire Sealant, 10-piece
tire tackle kit, 30 black plugs, T-Handle
reamer and plugger, tire gauge, alligator
clips, Slime decal set and instructions
•Also includes a 16’ coiled air hose and adapter for inflatables
TUBES &
ACCESSORIES
ATV/UTV
SUG. RETAIL .......................... $121.95
SUG. RETAIL ................................ $89.95
PART #
0364-0010
PART #
MINI SMART SPAIR™ AND COMPRESSOR KITS
PART #
0363-0019
SERVICE
TOOLS
SUG. RETAIL
$42.95
SDSB-1G
0363-0019
PART #
0363-0020
DESCRIPTION
Mini Smart Spair kit
CROSS
REFERENCE
INDEX
SUG. RETAIL
$52.95
3715-0002
SB1G
SBAP
SBAP
SDSB-5G
3715-0005
SB5G
SLIME SUPER-DUTY TIRE SEALANT
316
0363-0028
•Most compact flat tire repair and inflation system
•Sealant seals punctures up to 1/4” in tread area
•Nontoxic, safe for tires and wheels
•Fully inflates tires fast from any 12V power source
•Maintain tire pressure; save tread, increase mileage
•Modular kits store easily; water/shock resistant
•Mini Compressor kit includes 12V air compressor, permanent battery
connection, universal connections, alligator clip, tire gauge
and instructions
•Mini Smart Spair kit includes Slime Tire Sealant, 12V air compressor,
permanent battery connection, universal connections, alligator clip, tire
gauge and instructions
DESCRIPTION
Mini Compressor kit
MERCHANDISING
HEAVY-DUTY TIRE INFLATOR
•Inflate a standard tire in under three minutes
with this powerful 12V 150 psi compressor
•Includes a 16’ hose with a quick-release coupler, a
canvas bag for storage and an
easy-to-read gauge
•For quick and easy use, plug directly into your
power outlet adapter
•A bright LED light allows for use during
nighttime emergencies
FOR TUBELESS TIRES
3715-0001
•Just the Slime for motorcycles, ATVs, cars, trucks, 4x4s, golf carts,
lawnmowers, tractors and industrial equipment
•Formulated for all heavy-duty tubeless tire applications
•Instantly seals punctures up to 1/4”
•Installs through valve stem just like regular Slime
•Provides continuous protection for up to two years
•Environmentally safe; cleans up with water
•8 fl. oz. and 32 fl. oz. bottles, 12 per case; 24 fl. oz. bottles, eight per
case; 1-gal. jug, two per case; 5-gal. bucket sold each
DESCRIPTION
8 fl. oz. bottle
24 fl. oz. bottle
32 fl. oz. bottle
1-gal. jug
5-gal. bucket
Aluminum pump for 5-gal. bucket
PART #
3715-0004
3715-0005
3715-0006
SDSB-1G
SDSB-5G
SBAP
SUG. RETAIL
$7.95
13.95
17.95
40.95
201.95
49.95
FLAT TIRE ELIMINATOR
FOR TUBED TIRES
•Slime away your flat tire worries
•Can seal up to 1/8” diameter punctures in tube tires
•Environmentally safe, water-soluble, non-aerosol and nontoxic
•Gallon pail includes pump – perfect for shop or garage; pump for 5-gal.
size sold separately
•8 fl. oz. bottles, 12 per case; 16 fl. oz. bottles, six per case; 1-gal. jug, two
per case; 5-gal. bucket, sold each
DESCRIPTION
8 fl. oz. bottle
16 fl. oz. bottle
1-gal. jug
5-gal. bucket
Aluminum pump for 5-gal. bucket
2014 TIRE CATALOG
PART #
3715-0001
3715-0002
SB1G
SB5G
SBAP
SUG. RETAIL
$7.95
10.95
41.95
189.95
49.95
are new this year.
SERVICE TOOLS
STREET
0364-0015
•Easy-to-use eight-piece kit
•Includes T-handle tire reamer, T-handle tire
plugger, five plug strings and rubber cement
•Extra plug strings and cement also available
PART #
DESCRIPTION
Tire plug kit
Tire plug pack
Tire plugs, 30-pk.
PART #
0364-0015
0364-0012
0364-0014
SUG. RETAIL
$7.95
2.95
7.95
0364-0009
•P.O.P. bowl display containing 25 6-packs of
Skabs tire patches
•Super-sticky pre-glued patches adhere to
tubes instantly
•Each pack comes with a convenient plastic
container, a metal scuffer and six patches
•Sold to consumer as each; price reflects
each pricing
SKABS™ TIRE PATCHES
•Super-sticky pre-glued patches
•Adhere to tubes instantly
•Includes six patches and scuffer
SUG. RETAIL ................................$2.95
SUG. RETAIL .. $2.95
0364-0017
(ea.)
PART #
0364-0016
TIRE
REPAIR KIT
•Don’t leave yourself stranded
•The Moose Tire Inflator Kit gets you back on the road or trail quickly
•Inflator accepts threaded CO2 cartridges only
•4” inflator hose included
•Three 16 gram 3/8” threaded cartridges included
•Each cartridge produces 8-9 psi
•Replacement threaded cartridges (6-pack) available, PART #0363-0060
PART #
0364-0033
0363-0063
NOTE: CO2 cartridges cannot be
transported on an aircraft.
PART #
0363-0062
DESCRIPTION
Threaded 6-pack
Non-threaded 6-pack
2014 TIRE CATALOG
0363-0060
PART #
0363-0060
0363-0061
INDEX
•16-gram cartridges in threaded and
non-threaded styles
•Threaded cartridges have
3/8” threading
•For all CO2 tire inflators
•Sold in 6-packs
NOTE: CO2 cartridges cannot be
transported on an aircraft.
(ea.)
PART #
CROSS
REFERENCE
•Keep the right quantity of CO2
cartridges on hand
•Fish bowl display contains 20
16-gram 3/8” threaded
CO2 cartridges
•Sold in packs of 20 with fish
bowl display
are new this year.
SUG. RETAIL ............$24.95
REPLACEMENT CO2
CARTRIDGES
CO2 FISH BOWL
SUG. RETAIL .. $3.50
TIRE INFLATOR KIT
MERCHANDISING
SUG. RETAIL ............$35.95
SERVICE
TOOLS
•All you need to
repair and inflate
your tire on the road or trail
•Padded nylon zippered carrying
case easily stores inside fanny
pack or tool compartment
•Each cartridge produces 8-9 psi
•4” inflator hose accepts threaded
cartridges only
•Kit includes: one large oblong
patch, two medium size patches,
three small patches, thumb
buffer, .50 oz. tube of rubber
cement, five 4” rubber insert strips, insertion tool with screwdriver
handle, reamer/rasp tool with screwdriver handle, three 16 gram 3/8”
threaded CO2 cartridges and CO2 4” inflator hose
•Replacement threaded cartridges (6 pack) available, PART #0363-0060
TUBES &
ACCESSORIES
PART #
ATV/UTV
SKABS™ BOWL DISPLAY
OFFROAD
SUG. RETAIL ............$15.95
DRAG
SPECIALTIES
TIRE PLUG KIT
22-PIECE TIRE TACKLE KIT
•Everything you need to repair or patch a tire
in one convenient kit
•The kit includes four valve cores, one 4-way
tool, four anodized valve caps, three plug
repair strings, one 10-50 psi pencil gauge, one
screwdriver reamer tool, one screwdriver
plugger tool, five 13/8” round patches, one
metal scuffer and one .41 oz. rubber
cement tube
SUG. RETAIL
$20.95
16.95
317
OFFROAD
DRAG
SPECIALTIES
STREET
SERVICE TOOLS
E-Z GRIP AIR CHUCK TOOL
•Durable, E-Z Grip handle for comfort and a positive grip
•1/4” NPT pipe-threaded end will accept airline quick-disconnect fittings
•Designed for use on hard-to-reach wheels
SUG. RETAIL ............$20.95
SUG. RETAIL ............$31.95
PART #
3810-0036
PART #
3810-0037
PROFLATE ELITE TIRE INFLATOR
•Trigger-controlled technology for fast, easy and
controllable CO2 inflation
•Built-in dirt/water cover and built-in pressure indicator
•Valve interface: EZ connect/auto detect head
automatically grips valve when inflation starts
•Cartridge compatibility: 12, 16, 20, 25 gram threaded and
non-threaded CO2 cartridges
•Construction: glass reinforced nylon with brass
valve internals
•Weight: 55 grams
0364-0003
0363-0007
ATV/UTV
E-Z GRIP DUAL-HEAD AIR CHUCK
•Durable, E-Z Grip handle for comfort and a positive grip
•1/4” NPT pipe-threaded end will accept airline quick-disconnect fittings
•Sealed-ball air chuck is extended 1” from handle to allow access to
tight areas
STREET INFLATION KIT
NOTE: Does not work with 12g non-threaded or BigAir cartridges.
•Kit contains everything needed to repair a tire or tube:
CO2 cartridges, tire plugs, patches, glue, reamer and plug
installation tool
•Includes Monster air chuck and two 45g CO2 cartridges for
portable tire or tube inflation
•Compact zippered storage bag fits in toolbox
SUG. RETAIL ............$24.95
PART #
0363-0046
SUG. RETAIL
$59.95
29.95
TUBES &
ACCESSORIES
SERVICE
TOOLS
PART #
0364-0003
0363-0007
DESCRIPTION
Street tire repair kit
45g 5/8” threaded refills (pr.)
•Trigger controlled technology for fast, easy and
controllable CO2 inflation
•Built-in “trigger lock” prevents accidental CO2 discharge
•Valve interface: screw on for Schrader valves, slip
onto Presta
•Cartridge compatibility: 12, 16, 20, 25 gram threaded and
non-threaded CO2 and Big Air cartridges
•Construction: glass-reinforced nylon with brass
valve internals
•Weight: 72 grams
AIR CHUCK ELITE
•Top-of-the-line mini inflator
•Weighs only 17g
•All metal alloy construction
•Push-to-inflate technology for fast, easy and controllable
single-handed CO2 inflation
•Fits Presta and Schrader valves
•Works with all Genuine Innovations 12g, 16g, 25g threaded
CO2 cartridges and Big Air
SUG. RETAIL ............$19.95
SUG. RETAIL ............$21.95
PART #
INDEX
0363-0043
0363-0045
0363-0057
0363-0058
MP1 FOOT PUMPS
•Lightweight compact foot pump with gauge
•Compact size requires very little room
•High-pressure capability, more efficient than a
hand pump
•Ultra-lightweight design transports easily
•Durable plastic construction
•Works with Schrader or presta type valves
•Includes needle for inflating balls
•Foot brace folds away to compress pump
SEAL ‘N’ AIR
•Like having a spare tire in a can
•Any flat can be fixed in seconds
without tools
•Sold each
DESCRIPTION
Seal ‘N’ Air, 5 oz. net wt.
318
PART #
CROSS
REFERENCE
MERCHANDISING
ULTRAFLATE PLUS TIRE INFLATOR
PART #
SNA-01
SUG. RETAIL
$9.95
COLOR
Red
Blue
2014 TIRE CATALOG
PART #
0363-0057
0363-0058
SUG. RETAIL
$29.95
29.95
are new this year.
SERVICE TOOLS
STREET
DIGITAL TIRE PRESSURE GAUGE
SUG. RETAIL ............$13.95
PART #
0363-0064
DRAG
SPECIALTIES
•Rubber finished grip
•Measures in psi
•Digital readout
•Automatic shutoff
TIREPRO™ DIGITAL
TIRE GAUGE
PART #
PART #
0363-0021
0363-0041
3801-0122
3801-0190
PROFESSIONAL TIRE PRESSURE
GAUGES AND HOLDER
TIRE AIR
PRESSURE GAUGE
SUG. RETAIL ............$71.95
PART #
3810-0030
PART #
3801-0122
3801-0123
3801-0142
0363-0041
DESCRIPTION
0-30 psi pressure gauge
Pressure gauge holder
M55 TIRE GAUGE
SUG. RETAIL
$39.95
DESCRIPTION
0-30 psi
0-60 psi
2014 TIRE CATALOG
PART #
RH30XA
RRA60X
INDEX
are new this year.
RRA60X
•Flexible 11” hose between gauge
and chuck for hard-to-reach
tire valves
•Dual range scales with psi and kPa
or kg/cm2 are available
•Polished brass bezel, stem and
pressure release valve assembly
•Needle holds pressure reading
until released
•Push button valve bleeds air to
desired pressure
•0-60 psi range
•Measures tire pressure and releases
air out
•Soft flexible rubber hose
•Easier to access those hard-to-reach areas
•Easy-to-read gauge
•Valve cap rotates 360°
PART #
0363-0056
CROSS
REFERENCE
DIAL TIRE GAUGE
WITH HOSE
SUG. RETAIL
$100.95
100.95
100.95
24.95
MERCHANDISING
•Shock-resistant rubber-coated gauge
•Records pressure until release button
is pressed
•0-60 psi scale
SERVICE
TOOLS
•Pressure range of 0-60 psi is ideal for checking sport bike tires
•Pressure range of 0-30 psi is ideal for checking off-road motorcycle tires
•Pressure range of 0-15 psi is ideal for checking ATV tires
•High-quality liquid-filled 2.5” dial gauge with protective rubber boot
•Accurate to plus/minus 1.5% of maximum gauge reading
•Blue anodized 6061 T-6 body with pressure-relief valve
•High-pressure hose with dual swivels and brass ball-type air chuck
•Aluminum gauge holder is designed for use with Motion Pro tire gauge
•Gauge holder features a magnet on back that allows for quick mounting
to any metal surface; can be used without magnet for
permanent mounting
•Eye-catching number plate graphics with space for personalized
race numbers
•Slight oil seepage is normal
TUBES &
ACCESSORIES
SUG. RETAIL ......... $124.95
SUG. RETAIL ............$17.95
ATV/UTV
•High-precision: accurate to +/- 0.6 psi
•0-60 psi
•Precise digital readout to 0.1 psi
•Continuous pressure reading, no need to reset when activating
bleed valve
•Four selectable scales (psi, BAR, kg/cm2, kPa)
•Large easy-to-read display with back light for low-light applications
•Billet aluminum trapezoid body
•High-flow push-button bleeder valve for precise pressure adjustment
•18” long high-pressure hose with dual swivels and brass ball type
air chuck
•Rubber anti-shock protective boot
•Battery powered (1,000 tests) with battery strength indicator
•Auto-off to extend the battery life
•Battery included
•Compact ergonomic shape for easy
pressure readings
•Large display, with readings in
1/10 psi increments
•Readings available in multiple scales: psi, BAR,
Kpa and Kg/cm2; reads to 99 psi
•Auto power off, with last-reading recall feature
OFFROAD
DIGITAL TIRE
PRESSURE GAUGE
SUG. RETAIL
$22.95
22.95
319
SERVICE TOOLS
DRAG
SPECIALTIES
STREET
TIREPRO™ DIAL TIRE GAUGE
•45° chuck style with a 10” rubber hose
•Gauge reads from 5 lb. to 60 lb. with a pressure
release switch
•Comes with a plastic case
•Easy-to-read round dial, 60 psi max pressure
•Straight, steel-stem chuck, 45°
•Round 21/2” white dial tire pressure gauge
reads from 0-60 psi
•Includes purge valve; gauge holds reading
until valve is activated
•Measures 16” L when deployed
•Braided red/black/silver hose is 14” L
•Metal housing covered by a rubber sleeve for
easy gripping
SUG. RETAIL ............................. $23.95
SUG. RETAIL ............................. $17.95
SUG. RETAIL ............................. $19.95
PART #
PART #
PART #
DS-181213
TIRE PRESSURE GAUGE
0363-0018
ATV/UTV
OFFROAD
TIRE PRESSURE GAUGE
DUALLY DIAL TIRE GAUGE
•10-160 psi Dually tire gauge
•Features easy-reach dual foot chuck and
reset button
INDEX
CROSS
REFERENCE
MERCHANDISING
SERVICE
TOOLS
TUBES &
ACCESSORIES
TIRE PRESSURE GAUGE
320
0363-0012
•Easy-to-read, round dial; 64 psi max.
•Available in gray
SUG. RETAIL ............$11.95
SUG. RETAIL ................................ $16.95
PART #
0363-0038
PART #
0363-0033
0363-0034
MAGNETIC
ROUND DIAL
GAUGE DISPLAY
MINI MAGNET
GAUGE DISPLAY
0363-0036
•P.O.P. display contains eight magnetic round dial tire gauges 0363-0037
•Features 0-60 psi
•Magnetic for easy storing
•Gauges sold to consumer as each; price reflects each pricing
•P.O.P. display contains
12 mini magnetic tire gauges
•Features 10-50 psi
•Magnetic for easy storing
0363-0035
•Gauges sold to consumer as each; price reflects each pricing
DESCRIPTION
Magnetic Round Dial Gauge display w/ 8 gauges
Gauge refill, 8-pk.
DESCRIPTION
Mini Magnetic Gauge display w/ 12 gauges
Gauge refill, 12-pk.
PART #
0363-0036
0363-0037
SUG. RETAIL
$6.95 (ea.)
6.95 (ea.)
SUG. RETAIL
$3.95 (ea.)
3.95 (ea.)
LOW-PRESSURE
TIRE GAUGE
LOW-PRESSURE
TIRE GAUGE
SUG. RETAIL ................................................ $4.95
•Black plastic body and
chrome scale
•Marked in 1/2 psi increments
•Accurately measures tire
pressure to 8 psi
PART #
SUG. RETAIL ............$24.95
•1-20 psi low-pressure tire gauge
•Includes four standard black valve caps
0363-0032
PART #
131197
PENCIL TIRE GAUGE
TIRE GAUGE
PART #
P50SS
•Durable stainless steel construction
•Easy-to-read, four-sided nylon scale, 2 psi units
•10-75 psi range
•Graduated 1-20 psi in 1/2-lb. increments
•Four-sided nylon bar, air release and
offset chuck
SUG. RETAIL .............. $7.95
PART #
0363-0034
0363-0035
3810-0035
DESCRIPTION
10-30 psi
PART #
P30SS
2014 TIRE CATALOG
SUG. RETAIL
$3.95
DESCRIPTION
10-75 psi
PART #
P50SS
SUG. RETAIL
$3.95
are new this year.
MERCHANDISING
STREET
DRAG
SPECIALTIES
OFFROAD
MERCHANDISER TIRE RACK
•An inexpensive yet effective way to
display tires
•Holds approximately 20 to 30 tires and comes
with all mounting hardware
•One tire rack free with purchase of 50 tires;
limit three per dealer
PART #
ATV/UTV
SUG. RETAIL .......................... $149.95
DISTIRE
TUBES &
ACCESSORIES
•Great tool to boost Pirelli sales
•Available at no charge with
purchase of six tires
•Sold in pairs
•Great tool to boost Metzeler sales
•Available in a 2-pack at no charge
with purchase of six tires
9903-0061
PART #
9903-0060
MERCHANDISING
PART #
SERVICE
TOOLS
TIRE SHOES
TIRE SHOES
TIRE LABELS
DESCRIPTION
Drag Specialties tire labels, roll of 100
Parts Unlimited tire labels, roll of 100
Parts Unlimited tire labels w/ band, 50-pk.
LIGHTED SIGN
•Backlit sign highlights your Pirelli display
•Complete with hanging brackets and switch
PART #
DIS-05
DESCRIPTION
2013 retail catalog
2013 dealer price list
are new this year.
PART #
9901-1494
9901-1495
PART #
9904-0943
LABEL
LABEL-1
PARTS UNLIMITED/DRAG
SPECIALTIES TIRE CD 10-PK.
•Let your shop be open every day with Parts Unlimited CD catalogs
•Placed on a counter, this 10-pack can help boost sales to the fullest
•With the entire catalog on CD, customers will shop at home and order
from you
PART #
2014 TIRE CATALOG
INDEX
PARTS UNLIMITED/DRAG SPECIALTIES
TIRE CATALOGS
9904-0943
CROSS
REFERENCE
•Attractive, colorful tire
identification and pricing labels
•Available in rolls of 100
9901-1496
321

service tools

Transcription

Similar documents

Schierl Tire

DuraForce MH - Firestone Commercial Tires

CTC Environmental Policy_April_2015_low-res

Les Schwab Siping Brochure

Auto34 Tire Changer Customer Testimonials Pouring In

TIRE INFLATORS

BCLB - Benzie County

brochure pag seguenti

ATV Trailer Brochure - G Tech Marine, Inc.

3700 Fishinger Blvd ∙ Hilliard, Ohio