Document 1 - D.M. Figley

H
O
L
E
S
A
L
E
D
I
S
T
R
I
B
U
T
O
R
© 2 0 0 7
D . M .
F I G L E Y,
I N C .
W
D I V I S I O N
7
FIRESTOP MATERIALS
T A B L E
O F
C O N T E N T S
F I R E S TO P M AT E R I A L S
FLAMESAFE® FS 900+ SEALANT
Elastomeric Firestop
FLAMESAFE® FS 1900 SEALANT
Intumescent, Elastomeric Firestop
E-1
FLAMESAFE® FS 3000 COATING
Elastomeric, Sprayable Firestop
E-2
FLAMESAFE® MORTAR SEAL
Smoke & Gas Tight Seal for Large Openings
E-4
FLAMESAFE® INTUMESCENT SLEEVE
E-2
THERMAFIBER® Safing Insulation for Fire Stops
E-4
ULTRA BLOCK® Fire Blocking Expansion Joint System
E-4
E-1
®
FLAMESAFE SILICONE SEALANT
Elastomeric, Water Resistant Firestop
FLAMESAFE® FSP 1000/1077 PUTTY
Non-Hardening Firestop OFR Power & Data Communication Cables
FLAMESAFE® INTUMESCENT WRAP STRIPS & DEVICES
Resilient Strip to Firestop Combustible Penetrants
E-3
FLAMESAFE® PILLOWS
Removable, Reusable Firestop Seal
E-3
E-1
E-2
FIRESTOP MATERIALS
FLAMESAFE® FS
900+ SEALANT
Elastomeric Firestop
UL CLASSIFIED, FACTORY MUTUAL
APPROVED
WATER-BASED, EASY TO USE
EXCELLENT ADHESION TO MANY
SUBSTRATES & PENETRANTS
ELASTOMERIC & PAINTABLE
SYSTEMS UP TO 4 HOUR RATING
PRODUCT DESCRIPTION AND BASIC USE:
FlameSafe® FS 900+ Sealant is cost-effective,
water-based and cures to form a flexible shield
against the spread of fire and smoke. It is available
in two grades: caulkable/trowelable (CG) and
self-leveling (SL). FS 900+ does not contain solvents and, as a result, is not toxic and will not
damage plastic pipes or cable jackets. FS 900+
can be used in various penetrations and construction/architectural joint configurations. Examples of
listed systems include metallic and non-metallic
pipes, cable and HVAC penetrations, concrete
floor-to-floor, floor-towall and wall-to-wall applications, as well as for concrete, CMU and gypsum
head of wall applications requiring dynamic joint
movement. FS 900+ is a versatile, yet economical
solution for a wide range of through-penetration
and joint construction conditions.
D. M. FIGLEY CO., INC.
FLAMESAFE® FS
1900 SEALANT
Intumescent,
Elastomeric Firestop
1-800.292.9919
APPLICATIONS:
FlameSafe FS 1900 is used to seal openings in
fire-rated structures. Systems are available for
metallic and non-metallic pipe, cable, conduit,
cable tray and duct penetrations through typical
wall and floor construction. Also available for
joints between fireresistive assemblies (such as
wall-to-wall, floor-to-floor and head of wall),
concrete, masonry, fluted deck and gypsum substrates, wood joist floor-to-ceiling and chase wall
assemblies. FS 1900 is particularly suited for use in
applications where system vibration and building
movement are concerns.
UL CLASSIFIED, FACTORY MUTUAL
APPROVED
WATER-BASED, EASY TO USE
EXCELLENT ADHESION TO MANY
SUBSTRATES & PENETRANTS
ELASTOMERIC & PAINTABLE
PRODUCT DESCRIPTION AND BASIC USE:
FlameSafe® FS 1900 Sealant is a high performance,
elastomeric and intumescent sealant. It is a high
solids, water-based compound engineered to
provide exceptional adhesive and elastomeric
properties for the demanding firestop requirements of pipe, cable, sprinkler penetrations and
construction joints when subjected to frequent expansion and contraction. FS 1900 is intumescent
and expands to fill the void created by the melting
and burning of PVC, CPVC, cc-PVC, ABS, cc-ABS,
PEX, insulated pipe and plastic coated cables. FS
1900 does not contain solvents and, as a result,
is not toxic and will not damage plastic pipes or
cable jackets.
WWW.DMFIGLEY.COM
FLAMESAFE®
SILICONE
SEALANT
Elastomeric, Water
Resistant Firestop
UL CLASSIFIED, FACTORY MUTUAL
APPROVED
NON-SAG & SELF LEVELING GRADE
WATER RESISTANT
ELASTOMERIC SILICONE BASED
PACKAGING:
PRODUCT DESCRIPTION AND BASIC USE:
10.3-oz Cartridge
31-oz Sausage Pack
20.2-oz Sausage Pack
1-gal pail
5-gal pail
FlameSafe® Silicone Sealant is a flexible product
used to prevent/reduce the spread of fire, smoke,
gases and water. It is designed for firestopping
applications for penetrations, construction joints
and perimeter (curtain wall) joints. It is offered in
two forms, a non-sag caulk, which can be troweled,
and a self-leveling grade that can be poured into
place in floor applications. Actual installation may
vary according to the type of firestop application.
Apply the required depth of sealant beginning on
the edge of the opening (use over various backing
materials as required). Insure that the sealant makes
complete contact with the inside surface of the
opening and also the surface of the penetrating
item(s).
COLOR:
Red.
PACKAGING:
PACKAGING:
Non-Sag:
10.3-oz Cartridge
30-oz Cartridge
20.0-oz Sausage Pack
5-gal pail
10.3-oz Cartridge
31-oz Sausage Pack
20.2-oz Sausage Pack
1-gal pail
5-gal pail
COLOR:
COLOR:
Brick Red.
Red.
E-1
Self-Leveling:
20-oz Foil Pack
1-gal pail
5-gal pail
FIRESTOP MATERIALS
FLAMESAFE® FS
3000 COATING
Elastomeric, Sprayable
Firestop
WATER-BASED, EASY TO USE
SPRAYABLE & BRUSHABLE
PACKAGING:
ELASTOMERIC & PAINTABLE
HEAD OF WALL APPROVALS
1-800.292.9919
FLAMESAFE® FSP
1000/1077
PUTTY
Non-Hardening Firestop
OFR Power & Data
Communication Cables
APPLICATIONS:
FlameSafe FS 3000 has been tested for use in
perimeter barrier (curtain wall) construction and
head of wall applications. Apply coating uniformly
over mineral wool compressed into gaps, voids
or joint openings to obtain a minimum 0.125 in.
(3.18 mm) wet film thickness. Overlap coating
a minimum of 0.5 in. (13 mm) beyond all edges
of the opening onto surrounding construction
surfaces. Small or touch-up areas may be sprayed
or brushed.
UL CLASSIFIED, FACTORY MUTUAL
APPROVED
D. M. FIGLEY CO., INC.
UL CLASSIFIED, FACTORY MUTUAL
APPROVED
USE FOR RETROFITS
NON-HARDENING, PLIABLE
REUSABLE
WATER RESISTANT
5-gal pail.
COLOR:
Red.
PRODUCT DESCRIPTION AND BASIC USE:
PRODUCT DESCRIPTION AND BASIC USE:
FlameSafe® FSP 1000 Putty is an easy to install,
non-hardening and cost-effective firestop approved
for power and data communication cables. It is
intumescent, expanding to arrest the spread of
smoke, fire and toxic gases in fire-rated walls,
ceilings and floors. FSP 1000 offers excellent
dielectric properties and allows for easy re-entry,
making it well suited for applications in which
penetrants change frequently. Best known for its
ease of application and retrofit, FSP 1000 does
not require tools – simply handpack the putty into
the opening. In retrofit applications, remove the
putty, make the necessary cable changes and
repack the opening with the same putty!
®
FlameSafe FS 3000 Coating is a water-based,
elastomeric coating that is designed for spray
applications onto joints between fire-resistive
assemblies and perimeter barrier (curtain wall)
assemblies. FS 3000 cures to a strong,
flexible seal. The coating has
been tested to dynamic movement
conditions in accordance with
ASTM E1399 relating to seismic,
wind sway and FlameSafe FS
3000 Coating
APPLICATIONS:
FlameSafe FSP 1000 is used in small opening,
through-penetration applications to seal openings
around metallic pipes and cables. FSP 1000 provides an immediate seal against air draft, smoke,
toxic gas and flame propagation.
PACKAGING:
Various. Sticks, pads & bulk.
WWW.DMFIGLEY.COM
FLAMESAFE®
INTUMESCENT
SLEEVE
UL CLASSIFIED
FIRESTOP SEAL FOR PVC ETC.
QUICK & EASY INSTALLATION
FLEXIBLE, DURABLE, LIGHTWEIGHT
CAN BE RETROFITTED, OR REMOVED
PRODUCT DESCRIPTION AND BASIC USE:
The FlameSafe® Intumescent Sleeve (FSIS) is a firestop seal for PVC, cc-PVC, CPVC, FRPP, PP and ABS
pipe and rigid non-metallic conduit installations.
Easily installed without modification, steel bolts or
fasteners, the FSIS is an ideal approach for firestopping combustible pipes penetrating the uneven
contours of a concrete fluted deck assembly. It
eliminates the need for collars or wrap strips. The
FSIS easily wraps around pipes and is manufactured
from a durable 28 gauge galvanized steel outer
shell that is lined with FlameSafe FSP 1100 Putty,
a highly intumescent, malleable material. The FSIS
is fastened with either fiberglass tape, pop rivets or
hose clamps around the pipe. When used in conjunction with FlameSafe FS 900+ or FS 1900
Sealant, it produces an immediate smoke seal.
APPLICATIONS:
The FlameSafe Intumescent Sleeve can be used
with PVC, cc-PVC, CPVC, FRPP, PP and ABS pipe
and rigid, non-metallic conduits in sizes ranging
from 1.5 in. to 8.0 in. (3.8 cm to 20.32 cm).
Available exclusively from Grace Construction
Products, it has also been tested and approved
for use in concrete floor/wall installations and
concrete fluted deck assembly. For application
with 6 in. (15 cm) diameter or smaller PVC and
CPVC, the FSIS has been approved with an
optional sleeve (S/10 or heavier) cast or grouted
into the floor or wall.
PACKAGING:
FSIS 150 26896 1.5 in., FSIS 200 26897 2.0 in.,
FSIS 300 26898 3.0 in., FSIS 400 26899 4.0 in.,
FSIS 600 26900 6.0 in, FSIS 800 26901 8.0 in.
COLOR:
E-2
Black, putty.
FIRESTOP MATERIALS
FLAMESAFE®
INTUMESCENT
WRAP STRIPS
& DEVICES
Resilient Strip to
Firestop Combustible
Penetrants
UL CLASSIFIED
HIGHLY FLEXIBLE & RESILIENT
EASY TO USE, CUT & FABRICATE
RAPID EXPANSION
WATER RESISTANT
12-FOOT ROLLS
PRODUCT DESCRIPTION AND BASIC USE:
The FlameSafe® Intumescent Wrap Strip (FSWS) is
a highly flexible, resilient strip designed to firestop
combustible penetrants in fire-rated walls and
floors. Highly intumescent, the FSWS rapidly
expands to form a dense char to prevent the
spread of fire, smoke and toxic gasses when
exposed to temperatures in excess of 250°F
(121°C). The FSWS continues to expand up to
1000°F (538°C). Available in 12 ft (3.65 m) rolls,
the FSWS is easy to cut and fabricate to match the
circumference of the penetrant.
D. M. FIGLEY CO., INC.
1-800.292.9919
FLAMESAFE®
PILLOWS
Removable, Reusable
Firestop Seal
PACKAGING:
FSWS 100 Wrap Strip 12 ft x 1 in. x .25 in.
FSWS 150 Wrap Strip 12 ft x 1.5 in. x .25 in.
FSRC 100 Restraining Collar 25 ft x 1 in.
FSRC 150 Restraining Collar 25 ft x 1.5 in.
WWW.DMFIGLEY.COM
APPLICATIONS:
FlameSafe Pillows are used as a firestop to maintain
fire ratings up to 3 hours wherever penetration occurs through fire-rated walls and floor assemblies.
They may be used during the construction phase
as a temporary firestop or left in place as a permanent firestop. These pillows have been tested in
systems for 1 and 2 hour gypsum wallboard and
2 and 3 hour concrete wall and floor assemblies.
FlameSafe Pillows are a cost-effective solution for
firestopping power cables and
data/telecommunications cable which require
retrofit.
FSWSD 1300 Device 1 in. x 3 in.
FSWSD 1-400 Device 1 in. x 4 in.
PRODUCT DESCRIPTION AND BASIC USE:
PACKAGING:
FlameSafe® Pillows are a durable firestop product
allowing easy access to cables and cable trays for
through-penetration in fire-rated floors and walls.
Easy to install, firestop pillows allow for multiple
re-entry. They function through a unique phase
reaction to intumesce and seal out fire and smoke.
They are an ideal alternative to firestop large
openings and are approved for multiple cable
tray applications.
FSPIL1 27127 6 in. x 9 in. x 1 in.
FSWSD 1-150 Device 1 in. x 1.5 in
FSWSD 1-200 Device 1 in. x 2 in.
FSWSD 1.5-150 Device 1.5 in. x 1.5 in.
FSWSD 1.5-200 Device 1.5 in. x 2 in.
FSWSD 1.5-300 Device 1.5 in. x 3 in.
FSWSD 1.5-400 Device 1.5 in. x 4 in.(
FSWSD 1.5-500 Device 1.5 in. x 6 in.
APPLICATIONS:
The FlameSafe Intumescent Wrap Strip is used in
conjunction with sealant as a “tuck-in” system or a
restraining collar to firestop combustible penetrants
such as PVC, cc-PVC, CPVC, FRPP, cc-ABS and ABS
pipe, as well as insulated pipe. It has been tested
and approved for use in concrete floor/wall, gypsum
wall, as well as wood joist and wood chase wall
floor/ceiling assemblies. Applications where annular space is restricted may require the use of the
FlameSafe Restraining Collar with the wrap strip.
E-3
UL CLASSIFIED
EXCELLENT FOR LARGE OPENING
QUICK & EASY INSTALLATION
CHEMICALLY INERT/NONTOXIC
HEAT & FIRE REACTIVE
FSPIL2 27128 6 in. x 9 in. x 2 in.
FSPIL4 31068 6 in. x 9 in. x 4 in.
FIRESTOP MATERIALS
FLAMESAFE®
MORTAR SEAL
Smoke & Gas Tight Seal
for Large Openings
UL CLASSIFIED/FACTORY MUTUAL
APPROVED
LIGHTWEIGHT, LOW DENSITY
NONSHRINKING, NONTOXIC
POURABLE, PUMPABLE, TROWELABLE
PRODUCT DESCRIPTION AND BASIC USE:
FlameSafe® Mortar Seal is a cost-effective material
available for projects with many large openings. It
is a lightweight, low density product that is mixed
with varying amounts of water to produce the proper
consistency for pouring, pumping or troweling into
the cavity. Common plaster machines may be used
to mix and pump into large openings. Mortar Seal
is paintable with alkaliresistant paint. It does not
shrink, assuring a smoke-tight seal when cured. It
has a zero flame spread and does not contain
solvents or silicones.
Firestop Products
& Systems
GRACE FLAMESAFE® products are at
become a leading source for the firestopping
industry. Grace FlameSafe® makes quality
elastomeric products, sealant, mortar, putty and
full line of cable protection products. The
FlameSafe® product line is ideal for new or
FSM Bag 28162 22 lbs
FSM Poly Pail 26895 22 lbs
PACKAGING:
Packaged 3, 24" X 48" X 4" sheets to a bale.
COLOR:
Yellow.
the United States.
When you have a serious question about
firestopping, you need a serious answer-FAST.
That’s why D.M. Figley Company and Grace
Construction Products have a technical support
team that can get you an answer when you
need it. As an acknowledged leader in the
construction products industry, Grace takes
Light red
quality to the next level.
FIRE RESISTANT
NON COMBUSTIBLE
ECONOMICAL, DURABLE
AIDS SOUND CONTROL
THERMAFIBER® is in sheets 24" X 48" X 4" thick.
and residential buildings. All materials in the
FlameSafe® product line are manufactured in
COLOR:
COVERAGE:
retrofit applications in commercial, industrial
E-4
WWW.DMFIGLEY.COM
ULTRA BLOCK®
Fire Blocking Expansion
Joint System
Use THERMAFIBER® in combination with all
firestop sealants for wall and floor penetrations
where it is necessary.
line of firestop products including intumescent/
THERMAFIBER®
Safing Insulation for
Fire Stops
THERMAFIBER® safing materials contain no
asbestos. It is moisture resistant, non-corrosive,
non-deteriorating, mildew and vermin-proof.
products that save lives and property.
Grace FlameSafe® has a comprehensive
putty pads, firestop bags, sleeves, devices and a
1-800.292.9919
THERMAFIBER® safing insulation meets all the
requirements of void filling mineral wools used
to support firestop sealants. THERMAFIBER® can
resist temperatures over 2,000° F. The product
is rated “non-combustible,” as defined by NFIPA
Standard 220.
industry. Through innovation and continuous
improvement, Grace’s FlameSafe® line has
FlameSafe Mortar Seal can be used for all sized
openings, but is particularly suited for large openings
with multiple metallic or cable penetrations. The
cured mortar material contains chemically-bonded
water that absorbs heat. Systems have been tested
with Mortar Seal alone for most noncombustible
penetrants such as steel, copper and cast iron
pipe through the most common types of masonry
construction, poured concrete floors and walls, and
concrete block walls. Systems are also available
for cable trays, bus ducts and multiple mixed penetrants such as metallic pipe and cables. Mortar
Seal can be used cost effectively in conjunction
with other FlameSafe products for large openings
where combustible penetrants like plastic or insulated pipe require an intumescent product.
PRODUCT DESCRIPTION AND BASIC USES:
the forefront of the Fire Protection products
APPLICATIONS:
PACKAGING:
D. M. FIGLEY CO., INC.
CHEMICALLY INERT
NON-GASSING
COMPATIBLE WITH MOST SEALANTS
EXPANDS WHEN SUBJECTED TO
SUFFICIENT HEAT
PRODUCT DESCRIPTION AND BASIC USES:
ULTRA BLOCK® is a patented fire blocking backer
material that enables many elastomeric sealants
to have a 2-hour fire and temperature rating in
expansion joints. ULTRA BLOCK® is designed for
use in high rise office buildings, hospitals, schools,
hotels, prisons, enclosed sports arenas, airport
terminals, shopping malls, nursing homes, manufacturing plants, precast and pre-stressed concrete
structures, parking garages, warehouses, chemical
plants, elevator shafts, and others, to comply with
existing building and fire codes.
The systems will effectively contain fire, smoke,
and toxic fumes within a given area surrounded
by firewalls for a 2-hour period, thereby enabling
a safe and orderly evacuation of the surrounding
areas after the affected area is evacuated.
PACKAGING:
Flat
Standard
Thickness
3/8" X 70'
1/2" X 60'
3/4"X 40'
1" X 30'
Design
Joint
Width
To 1/2"
To 3/4"
To 1"
To 1-1/2"
Lin Feet
2" Wide
Ea. Bag
1260'
1080'
720'
540'
Lin Feet
Color
6" Wide
of
Ea. Bag
Bag
420' ORANGE
360'
YELLOW
240'
GREEN
180'
BLUE